An alternate method for determining armor thickness is to wait for a senior NCO to be sitting inside the vehicle, then using a hammer to hit the section of armor you are trying to measure. The actual measurement is determined by how long it takes for the angry non-com to pop out of the vehicle and start screaming at you. Naturally, the calibration is affected by a number of factors, including the NCO's general level of cafeination, time of day, what the nonsense lieutenant has been up to lately, whether a junior enlisted received a DUI the night before, and perhaps most importantly, the non-commissioned officer's "base hate level."

@lonesurvivalist3147

Жыл бұрын

Seems like alot of variables to have to take into account

@user-it3gp4vm1z

8 ай бұрын

​@@lonesurvivalist3147but its the best way to measure it in a field environment (carpool)

Came for the track tension... Stayed for the tank.

@neilwilson5785

5 жыл бұрын

Why is everyone funnier than me... waah! Nice one.

@badcornflakes6374

5 жыл бұрын

@@neilwilson5785 They just used an overused meme format in context of the video.

@hugopepe1722

3 жыл бұрын

3:32 Is it just me or is this section full of sexual innuendos?

And today, we learn that the turret monster is actually the Energizer Bunny.

@Sniper13111

5 жыл бұрын

Is that why the turret turns so damn quickly

@jamesluke7377

5 жыл бұрын

😂😂😂

@pex_the_unalivedrunk6785

5 жыл бұрын

LOL

Little known fact. The main gun on this tank actually folds out into a giant sword, a battering ram, a wine barrel opener, and a pair of hedge clippers.

@danielaramburo7648

2 жыл бұрын

And sell cleaning.

@zerstorer335

Жыл бұрын

No toothpick?

@stewpacalypse7104

Жыл бұрын

@@zerstorer335 it had one but like usual it's lost.

8:59 that little piece of leather is on almost every swiss army box or crate out there, we really like those

@SonsOfLorgar

5 жыл бұрын

Swedish army crates and boxes made pre 1990 has the same locking system and leather tong especially common on tent boxes

@spooky15

5 жыл бұрын

Panzerfan93 how exceedingly Swiss. 🇨🇭

@badcornflakes6374

5 жыл бұрын

Noice

@Electronick7714

5 жыл бұрын

I would think leather would be a bad choice for anything that's going to be out in muck, water, hot weather, rain etc.

@davidgoodnow269

5 жыл бұрын

@@Electronick7714 Leather lasts long enough in most conditions, a leather thong is cheap and easy to replace (buy a boot lace, trim to length needed, save remainder). Leather can also literally last centuries in display conditions as long as it is kept oiled to preserve its integrity.

For those of you confused like me: BII stands for Basic Issue Items.

@minuteman4199

5 жыл бұрын

The Canadian army (likely the British as well) equivalent is EIS - Equipment Issued Separately.

@barrymerchant3320

5 жыл бұрын

@@minuteman4199 British Army is C.E.S. Complete Equipment Schedule.

So, in short, The French - We do things different because we are French. The Swiss - Challenge accepted.

"I just fed the turret monster a bunch of batteries" Turret Monster: Om-Nom-Nom! Wait you want back? No can have, all offerings to turret monster final!

@markfryer9880

5 жыл бұрын

Damn I was going to make a comment like this but yours was much funnier. Walks away muttering and grinding teeth.

@Allan_aka_RocKITEman

3 жыл бұрын

@@markfryer9880 >>> _"muttering and grinding"_ -- the _language_ of the _turret monster?_ 😊😊😊

Maybe we ought to start another challenge... "Oh bugger I dropped the batteries"

That sloping engine deck is perfect for sleeping on if you got gastric reflux disease from eating alot of cheese fondue.

@damianp7313

4 жыл бұрын

That was oddly specific

A number of Porsche designs including the Ferdinand/Elefant used horizontally mounted belleville washer suspension units. The proposed E-10/E-25 tank destroyers were to use the same system as on the Panzer 61. Presumably the Swiss studied the designs and decided to give it a try.

@tigercat418

4 жыл бұрын

Migration is wrong

@F1ghteR41

4 жыл бұрын

Ferdinand had horizontal torsion bar suspension.

With it being Swiss I was hoping to see a small file, a corkscrew and a screwdriver etc in the stowage bins

@Bird_Dog00

5 жыл бұрын

No need, every swiss citizen is expected to carry a swiss army knife with those accessories at all time anyway.

@razor1uk610

5 жыл бұрын

..and a place for the fondue bowl, rack & spirit burner; unless the crew prefer a raclette grill/griddle-plate...wh Although for the latter, I suppose there could be a adapter attatchment to one of the exhaust cover boxes made by a maintenance section - for part-cooking the rations.

@samuelbhend2521

4 жыл бұрын

that was found to be a fault, so on later models we fitted the gun so it could be folded back and instead you could fold out corkscrew, knife, saw, canopener, if needed. the toothpick and the pinzette were stowed on the fenders... The problem with this model was then that the gun was folded in at wrong moment, because you can't fight enemy's with toothpicks, since jörg sprave isn't swiss...

@gehtdianschasau8372

4 жыл бұрын

​@@tigercat418 Der Kardinal hat dir nicht das Gehirn rausgefickt, weil er schwul war, sondern ein Pedo.

@Allan_aka_RocKITEman

3 жыл бұрын

In other words, the tank would be a _TRANSFORMER._ 😊😊😊

Finally I can hear what you're saying.Thank you for ditching the music.

@theluftwaffle1

4 жыл бұрын

Dr. Love Sweet Sweet Silence.

@jerdasaurusrex557

4 жыл бұрын

This one isn't paid by Wargaming.

@williamforbes6919

3 жыл бұрын

This one is on his own channel and wasn't edited by Wargaming, so there very much will still be the loud music still on the sponsored videos.

I know far more about track tensioning than I ever thought I would. Thanks Chieftain.....I guess. 😉

Hi, I'm Ian and I'm in here Rock Island aucti... Oh wait, wrong channel.

Residing in Switzerland I never knew the country produced its own tank. Now I know thanks to Chieftain.

@Allan_aka_RocKITEman

3 жыл бұрын

*MacReady:* _"Hey, Sweden!"_ *Dr. Copper:* _"They're not Swedish, Mac. They're Norwegian."_ *-- THE THING [1982]* 😊😊😊

@2:30 The Chief has levelled up! He can now make up his own tanks! :P

hello from switzerland! nice to see something from our land!

Me: "Oh goodness how I am I going to stay calm during my finals." Tank Jesus: *uploads* Me: "Praise be the savior!"

@deptusmechanikus7362

5 жыл бұрын

_Oh bugger, the deadline is on fire!_

@benewagner9212

5 жыл бұрын

My first Final is in 5 days, so this sort of comes at the right time.....

@toasterbathboi6298

5 жыл бұрын

Bene Wagner good luck man.

@fien111

5 жыл бұрын

I prefer St. Pattrack

@psychologiccallynuts

5 жыл бұрын

I think David Fletcher is a more appropriate candidate for tank jesus

Very well researched, thank you. Another peculiarity of this tank is the restricted width, which is only 3 meters, due to the insistence of an important parliamentarian of the then tank committee on the vehicle being able to use tertiary roads. This caused many problems later in the Pz 68, the tank being very cramped and having no development capability. There is a large collection of army vehicles in Burgdorf near the capital Berne in the collection of historical material of the Swiss Army, the Stiftung HAM. The collection is only open to the public in guided tours in groups, I am happen to be one of the guides. The collection consists of over 450 vehicles on display, including all the tanks the Swiss Army used, in addition to a host of M109 and M113. Plus trucks, light vehicles etc. etc. So when you happen to be in country I would be honored to show you the collection, filming can be arranged.

@TheChieftainsHatch

5 жыл бұрын

I will try to remember to take you up on that, next time I'm in that neck of the woods.

@edfrancis712

5 жыл бұрын

Hi Hunter, i do a similar role here in the UK as a volunteer at bovington and also take small groups to the Armys DCC center, would you be happy to do a small group from the UK?

@huntermirage5171

5 жыл бұрын

ed francis hi Ed / would be a pleasure. Please contact me at pesam©hispeed.ch. cheers

@FortuneZer0

5 жыл бұрын

Has HAM finaly fixed their problems (getting rid of a certain person) or is the future cooperation with the Bund still uncertain? I havent yet decided to donate but im within 200m of the main place in Thun.

@edfrancis712

5 жыл бұрын

@@huntermirage5171 will have a go, have you got an email hunter. PM me, be great to chat, ed.

There's something to be said for universal military service, especially when designing domestically produced equipment. The guy designing it most likely has been the guy who had to use it.

@hansmueller3029

3 жыл бұрын

Or his child. Even more reason to design it well.

@ravenouself4181

Жыл бұрын

@@hansmueller3029 Add to that that he was Swiss, and boom, an incredibly well designed tank.

That infantry phone looks like the one we had on the M60A1 and 3. It had the radio function. The labels were in English.

Gotta keep the Turret Monster happy! :D Can't wait for episode 2!

"What sort of hickey's the do-hickey's do." Now that's a technical term you don't hear everyday. 🤣

@The_Chieftain The Panzer 68 suspension vertical travel for each wheel was 206 mm (bump) and 70 mm (rebound) for a total of 276 mm. The transmission of the Panzer 61 featured a sophisticated double-differential steering system with a hydrostatic steering drive (easy to drive)

I missed the days of blessed youth gone by when there were regular expositions and the tanks and other vehicles became a quasi playground for children. For a long time Ive had forgotten the fun that was climbing around on armored vehicles. Then I got drafted as armorer and got to embrace these joys of the youth, jumping from deck to deck in the heights, as well as encountering the horrors of maintaining some of these sometimes neglected giants.

12:54 I completely tuned out when I spotted that MiG-21 stalking the Panzer.

@FirstDagger

5 жыл бұрын

MiG-21PFM Manufacturer Serial 94A7809 Local Serial Number 7809 FAA N221GL

@wape1

5 жыл бұрын

@@FirstDagger ...and only $20,000 - $30,000!

At around 4 minutes when the Chieftan mentions the tracks were made of cast manganese, which didn’t make sense to me as you can see corrosion on the track links consistent with steel or iron. I’ve heard him before mention the composition of tracks before as manganese and say he didn’t know what it meant so I did a google search on cast manganese. It turns out the tracks are made of a steel alloy containing around 13% manganese called mangalloy or Hadfield steel which has priorities that makes it an ideal material for making tracks out of. Funny the rabbit holes you go into when you hear a weird piece of information in a video. 🙂

@sskuk1095

18 күн бұрын

Manganese steel. The Tank museum KZread channel got it correct: kzread.info/dash/bejne/ha1hvLKOnczaado.htmlsi=-F1RFiUd4SQYFzGc&t=495

Thumbs up if you DO NOT miss the background music of the otherwise excellent 'Inside the Chieftain's Hatch' videos?

@deptusmechanikus7362

5 жыл бұрын

I can take it or leave it. Never bothered me

@axelrajr

5 жыл бұрын

i liked the music from the earlier videos, its was what they changed to more recently that i could do with out.

@Luwinkle

5 жыл бұрын

These aren't being done by wargaming, that's why there's no music.

@PeterGriffin-rp9iq

4 жыл бұрын

I can’t watch the ones with the music, it’s super annoying. Love the change.

@robertpayne2717

4 жыл бұрын

Kinda like a whatchamacalit

Well that’s a bizarre number for a Panzer. I’m used to them having Roman Numerals

@A.J.K87

5 жыл бұрын

And being German instead of swiss ;)

@ProudToBeNoob

5 жыл бұрын

Panzer LXI Happy?

@Paveway-chan

5 жыл бұрын

@@ProudToBeNoob Panzer Lexi

@badcornflakes6374

5 жыл бұрын

Hitler liked his Roman numerals

@Paveway-chan

4 жыл бұрын

@@s.walker5574 wait what

It's really fascinating to learn about some of these less well known tanks, excellent video

Man, shipping that big boy to US must have been helluva fun

@markfryer9880

5 жыл бұрын

Just book a spot on a RoRo vehicle carrier ship and specify your port of disembarkation. Getting through Customs could have been a tad tricky given a certain 105 mm but it was accomplished somehow.

@davidgoodnow269

5 жыл бұрын

@@markfryer9880 $200 tax stamp as a destructive device plus paperwork requesting Curio & Relic Collectible status determination. Can't be an actual C&R, until after the DD tax registration gets approved and paid, but then C&R can be applied to grease import.

Nick getting tongue there a bit with his Pz 51's and stuff, but its not easy to do. the suspension is to keep the narrow profile. torsion bars can do this but have their own problems and are more hastle than their worth, Horstman types are good as they take up no internal space but you end up with a wider vehicle, this allows a best of both option with no internal space taken up but narrower profile to keep the doctrine of using Swiss tunnels. one final note is the armour should have a air pocket at the back end with diesel fuel cells in it, as they offer additional protection from SC attacks, this will effect ur ultrasound.

But did you get the batteries

@ekscalybur

5 жыл бұрын

Once you give it to the turret monster, you DON'T get it back.

@azgarogly

5 жыл бұрын

@@ekscalybur There is a hope the Turret Monster was sleeping at the time.

When a clock makers inner tanker comes out, this is what you get

Been wishing you'd do this tank.. Thanks!

I best get saving my pennies! To my shame, I’d never heard of the panzer 61. Cheers chieftain 👍

@andrews_lego_tanks_and_more

5 жыл бұрын

To my own shame I'd only heard of these Swiss vehicles a few months ago, they aren't really in the spotlight as much.

Very great video, Nick.

WTF?! ALL the BII intact and IN the proper stowage?! What black magic made THAT happen???

@StaffordMagnus

5 жыл бұрын

Gotta hand it to the Swiss, they sure do know how to make a neat and tidy tank - I'm guessing their ergonomics will be top notch too, but we'll have to wait for part 2 to find out!

@M.M.83-U

5 жыл бұрын

Swiss precision!

I was really curious about the belleville washer suspension. Apparently, the Germans (in WW2) were going to equip their ENTIRE E-series with it. I can see several pros to it (maintenance and a lower overall vehicle - than torsion bars, anyway). But so far, I cannot find a con. Must be some though.

Switzerland in the 1960ies had so many military bases and instalations all over the country, that maybe it was deemed extremely unlikely, that a tank crew would ever get into a situation, where they had to sleep on the tank?

@davidgoodnow269

5 жыл бұрын

You don't sleep on the tank, you sleep under the tank. (1) Protection from artillery while you're unconscious. (2) After cleaning track and pulling maintenance, not to mention ammo transfer, cannot lift arms high enough to climb up.

Tank Jesus: **applies lube to sensor** Tank: yes daddy Tank Jesus: Wtf

@Carstuff111

5 жыл бұрын

Hahahahahaha!!!

Track tension adjustment is automatic by means of a hydraulic system. Nothing needs to be done (nor undone :-) ). The suspension made for a very comfortable ride. You can easily figure out the full travel by the position of the end stops. The only problem was that you could shear off the bolts securing the suspension of the first road wheel to the hull, thereby loosing said wheel along with its suspension, if you hit a large solid obstacle at high speed. While the automatic tensioner kept the track firm on the tank and the loss of one wheel had no immediate impact on the mobility of the tank, it meant you had to go pick up the heavy piece of shit while your mates were chasing the birds in town, extract the remainders of the bolts from the hull and put the assembly back up. The ammunition port in the turret is not an ammunition port, it’s a case eject port. It is part of the casting and was there from the very beginning. It wasn’t present in the very similar looking predecessor, the Panzer 58, of which I don’t think there exist any outside the Swiss Panzermuseum. There is an ammunition port too, you can see it on the left side in the hull, just above the suspension of the third road wheel. The bowden-ish linkages connect the steering wheel, shiftlevers and pedals with the transmission, where all the shifting and steering happens. The common language of the Swiss military is swiss, german, french and italian.

@NullElemental

2 жыл бұрын

thats some very archaic knowledge, and well appreciated!

Very T54ish looking at it from the side Just my observation of this thing

These are so nice without that WarGaming music. Thanks for doing more!

3:30, seductive stepdad pose to get to the track tensioning system. The Chieftain is now Panzer Daddy.

@deptusmechanikus7362

5 жыл бұрын

*Thou shall not speak of Panzer Jesus on such blasphemous manner!*

@ekscalybur

5 жыл бұрын

He's going to LOVE this. Someone call him this at the next Tankfest.

Hey, Chieftain, engine pack out in only an hour! shouldn't take too long to get them batteries back...

i always love the track tension segment in the videos

@markfryer9880

5 жыл бұрын

It is a highly anticipated segment judging by comments on previous videos.

14:56 Holy shit you can just buy one of those to measure the armour of a tank...? Dear god, keep those things away from me or I'll start squatting in a tank museum, spending weeks on end going over every tank ; - ;

@llllib

5 жыл бұрын

Sir, what do you plan to do with all that lube in our museum?

@Allan_aka_RocKITEman

3 жыл бұрын

@Tom Meakin >>> Your comment is _thicc._ 😊😊😊

Came for the track tension... Stayed for the tank.. Gotta keep the Turret Monster happy! :DCan't wait for episode 2!.

There is usually one running at Tanks in Town, Mons, Belgium for those interested.

@denisegloff6760

5 жыл бұрын

The one at Mons is a Pz68 as I remember

After doing the ultrasound, did you find out the sex of the tank ?

@nickmoore385

5 жыл бұрын

It’s ammosexual.

@Cybrludite

5 жыл бұрын

It started as male, then transisioned when the 20mm was replaced with the 7.5mm.

@Carstuff111

5 жыл бұрын

@@Cybrludite Hahahahahahaha!!!

@pitcheralex1262

5 жыл бұрын

Obviously a girl, tanks wear skirts after all.

@alexander1485

5 жыл бұрын

it could be a scottish tank, scots wear kilts

Yes, the Panzer 61! Right now, I am proud to be Swiss. A beautiful little tank. Unfortunately most of them are just standing somewhere in the rain and are nothing more than rustbuckets by now...

I served on the Pz 68/75/84 as Lieutenant or Platoon Commander. If you have questions, please let me know :)

Always great to hear the Irish Shh as in Sh-tuff .. especially explaining the complex simplicity of the Swiss Army Knife idea - mounted on a tank. Make way there for Shlattery's Mounted Futtt .. Huzza (with an -ay sound, it seems not with an -ah; like Jose and a wee cuppa tea: Yeah! hurray!) It's OK, I'm daft - certified and all.

Chieftain, since you were over the engine deck at the time. I believe the recipient of your impromptu battery offering was indeed the "Hull-Monster", A distant but equally ravenous kin to the "Turret-Monster". Nothing like pulling a power-pack to get back your treasured articles. >_

Tank god doing it again

belleville washer idea is interesting especially for the time and using softer steel it makes sense

Very interesting tank, I am looking forward to part 2. Can we get any more info on the odd belleville washer suspension?

My wife is from Switzerland and speaks German, French, Swiss, a little Italian and now English. Depending on where you live in Switzerland, the main language spoken will vary between German, French, Italian, the Swiss dialect of German and in a remote canton where her mother came from speak a form of Latin, known as Romish, I think that's how its spelled.

@lucariolps277

3 жыл бұрын

It's spelled Romansh. And there are multiple Swiss German dialects. Almost 1 per canton.

@richardc7721

3 жыл бұрын

@@lucariolps277 yes I am well aware of that.

I love how that lock for the engine hatches uses keymod essentially, the Swiss, always ahead of their time

Ive seen similar leather retainers on various swiss army rucksacks and bags.

I'm presuming cast manganese steel, pure manganese tracks might be a tad expensive/brittle?

@nelsonglover3963

5 жыл бұрын

niels lund manganese not magnesium

@pex_the_unalivedrunk6785

5 жыл бұрын

Manganese is like perverted anime cartoons...it's manga-knees! Used in engine block and heads of VW Type 1....common as well in many aircooled 2 cycle engines as well(lawnmowers etc)

Yay, been waiting for that one. You just made me a realy happy panda, Chief! Even though I am swiss, I never heard of the unique suspension of this vehicle. I just assumed it was torsion bar. Teaches me to reley on assumptions... That strip of leather securing the latch is actually quite common in swiss military gear of that era, you see it everywhere. As to the language thing, well my dad served as a career officer before he retired, and afaik there is no official lingua franca. Officers are expected to speak at least two of the four offical languages plus english, and proficiency in aditional langages is very good for your career I would presume. My dad needed german, french, italian and english to do his job, with german being the most common, given that about 60% of the swiss population speaks german. English being needed for the whole NATO/PfP stuff, as well as probably serving as an inofficial lingua franca ("military english" is a part of the official curiculum in the swiss military).

@markfryer9880

5 жыл бұрын

Sorry but PfP is not known to me?

@markfryer9880

5 жыл бұрын

As for languages, I got a letter from the Australian Government the other day and while English is our official language, it contained something like 14 other languages details and they are just the most common languages.

@TheChieftainsHatch

5 жыл бұрын

Partnership for Peace, I do believe.

@Bird_Dog00

5 жыл бұрын

@Mark Fryer PfP Partnership for Peace, as Chieftain said, switzerland is a member. 14 languages being used in official correspondence? That sounds rather inconvenient. And here i thought my country has a problem with 4...

@M.M.83-U

5 жыл бұрын

@@Bird_Dog00 amateur, try the UE burocracy... more than 31.

Somehow this one skipped my viewership till now. Cool little device you got there at the end to measure hull thickness. would like to know more about it. Also i hadn't heard the term Manganese in a while. I remember clearing out a warehouse full of that stuff a decade ago, Brings back memories.

I got to see the Pz. 61 and Pz. 68 up close at a tank museum field day last year. I enjoyed it thoroughly but I didn't get to inspect the interior.

That infantry phone system is straight off the M48/M60s, which also allowed the user to transmit over the tank's radio.

It's wild that people were able to build such things without CAD

Turret monster is fed and well i see. Good.

YEESSS Tanks are back!!!

Where's the part "Oh my God the tank's on fire"? Great video all round and great to see a Switz tank.

@Lisandro-ym1sc

5 жыл бұрын

Probably in Part 2 when he review the interior...

When the Chieftain said don't sneezed, I just sneezed. Sorry Nick

I know I'm really late, but I think I can add my own two cents to the Belleville washer rarity. I was looking into the system in modern use and the basic problem is, from what I understand, is that it's a high friction system--each washer has a high surface area of contact both with the other washers and its retaining material, whether it be a containing cylinder or a shaft. Any amount of dust or abrasive, ie from the washers wearing, quickly wears down washers, and you can't just replace them or you'll get early failures of the replacement; you need to get rid of all the dust. This isn't a problem in machine or civilian use because these systems do not need to be airtight like tanks need to for NBC protection. The advantages then are just the compact nature, easy tuning, and cheap maintenance as far as normal life is concerned--it's just a few rings of metal. So, it's a high maintenance system in an area of the tank that is hard to get to in the field, in the military where crew maintenance is not always the highest priority. Leftover material causing early failure is also a problem of torsion bars or so you've said, but it's a lot easier to pull out fragments than trying to clear dust out of a tank suspension. On the tank itself: the fit and finish is lovely! At least physically, everything looks to be well crafted, at least if we exclude the infamous electrical problems.

@magni5648

2 жыл бұрын

That makes little sense as far as I understand the whole system. The bellevile washers are in essentially tubes bolted to the side of the hull. Wether they're airtight or not doesn't impact the interior of the tank being airtight or not, the whole system is situated outside the hull. This also makes the suspension actually pretty easy to maintain or repair in the field if they're designed with an eye towards it: Pull the roadwheel pair, unbolt the unit for that roadwheel pair, bolt a new one into its place and put the roadwheels back on. Apparrently the only notable problem with the system the Swiss experienced was that if the tank hit a solid object at significant speed, it could shear off the bolts securing the front-most unit, causing it and the roadwheel pair to fly off. This didn't immediately immobilsie the tank, but was a bit of a hassle to fix, especially in regard to getting the remaisn of the shorn-off bolts out of the side of the tank.

@jarmokankaanpaa6528

2 жыл бұрын

The high contact area applies only if the washers are piled in the same direction, i.e., convex to concave. If they are piled in series (alternately back-to-back and front-to-front) they are only in contact at the centres or the edges and the surface-to-surface movement is minimal: two concave surfaced pushing against each other expand ideally at the same rate. I've shot old 152mm Canet coastal guns with Belleville springs in the return mechanism. Admittedly the stack was quite a bit longer than in the tank springs, but the 7.5 tons of barrel and breech recoiled back and forth around a foot and a half in a split second, so the springs were very efficient indeed. The springs were not encased, but then rust was more of a problem in the coastal environment than dust.

@The_Chieftain Pz. 68 suspension vertical travel : 276 mm = 206 mm (bump) + 70 mm (rebound)

Shouldn't the Video Description say Part 1? Nice to have a Inside the Hatch without the music. Thanks for your great content Cheftain.

@TheChieftainsHatch

5 жыл бұрын

Good catch. Fixed.

That's the nicest made tank ever. It's like the insanely machined guns that they had. Quality equipment, very unusual for a conscript force.

@venator5

5 жыл бұрын

It had some cool features but also bad ones. I don't like that drivers hatch. The barrel could prevent you from opening.

@M.M.83-U

5 жыл бұрын

Standing Militia, it's different; more like the US National Guard.

@venator5

5 жыл бұрын

@@M.M.83-U It does not change the fact that you have to get out fast from the tank.

@M.M.83-U

5 жыл бұрын

@@venator5 no, but give you lot of training and practice in doing so; way more in comparison to the usual conscript. Maybe in part tow we learn about how to avoid this problem ... maybe not. See you next time.

Reminds me of the Churchill 1. An AT gun of some sort, plus a 75mm aux. weapon.

It seems some Tiger IIs used a belleville washer suspension as a test for the E series plans.

My boat is fitted with an OM636 - This must be the most versatile engine ever designed.

Automobiles should and I hope will be like this one day; with a power-pak assembly with quick-disconnects.

@minuteman4199

5 жыл бұрын

Most cars now are built by putting the engine on the frame/chassis before the body panels as added. I have no idea how you get the engine put of a modern car. It was pretty easy in by 1973 Dodge, you could hoist the engine transmission assembly out with relative ease.

@thhseeking

5 жыл бұрын

That would save time and labour costs! Are you crazy?

They angle the back slightly down to make it easier to sleep without a pillow because the bustle basket was too small to store pillows too.

Happenstance - I love the word!

I have seen similar leather retaining straps on Swiss army accessory bags. I have a Swiss gas mask bag with the same straps on the buckle .

The slop on the engine deck was designed to help snow to slide off in the Swiss alps

hello and congratulions for your great presentation! maybe you will do an inside the hatch on the romanian TR85/TR85M1 from romania.

track tension and the turret monster.2 of 3 boxes checked need the on fire test for the trifecta

@TheChieftainsHatch

5 жыл бұрын

I have good news for you, then...

Id love to see an inside the hatch on something like either an m7 priest or the wespe.

I love neutral countries design (Switzerland, Sweden etc.) for the cool features that fighting powers couldn't afford at the time (both ww2 and cold war). They also may have these excessive design / naive unique features.

def recognise some of the lights and stuff.. you can commonly see them on swedish vehicles from the same era :P the searchlight on the turret is the headlight of a swedish PBV302 APC :P or atleast identical in apperance :P guess the swiss did take some advise and bought some parts from the swedish :P well.. in fact.. they allways have i think... dont know what we buy from the swiss though.. watches maybe? or maybe we get a discount on ski trips :D

Tannkkkksss.. we get tanks again

You made me look up belville washer...... Fucker! Love you fellow tanker! I love how "gentle" you are with the tank....

interesting video - I guess the travel lock would be called in German "das Marschlager" - that is what we called the very part on a M109 - I assume they would also have designed in a Nespresso coffee machine if they would have existed already at the time ;-)

The reason for French and German only is that Tessin would be sacrificed and never defended... :)

"Very neat, these Swiss" Yeah, these are the guys who built their "rough 'n' ready" 1950s submachine gun with serialized screws. Every screw on the gun had a matching serial number. It did have a tubular receiver...machined from a solid block of steel instead of pressed sheet metal tube. the Swiss are perhaps the most stubbornly thorough people in the world. If you want a very high quality item, however, look no further.

The TC and Loader get to look into each other's (periscope reflected) eyes.

Would like to see more armor measurements in the future lol

That's the second time I've seen him step on the towing pintle. Of these days it's going to spin and the result won't be pleasant, and it surely won't be "easy enough."

Interesting suspension. The germans had the idea to use the same technique in the E50 and E75 "paper tanks"

Cutest tank of them all at 1:38 The Hetzer.

@norwegianwiking

5 жыл бұрын

everyone knows the Luchs is the cutest tank

Angling the rear engine deck downwards allows for better gun depression when turret is aimed rearwards

@TheChieftainsHatch

5 жыл бұрын

Fair point

@XtreeM_FaiL

5 жыл бұрын

Nicholas Dobos That also make the tank bit lighter and smaller and what would you do with that extra space anyway? Big box is a waste of space and material.