This channel should have a million subs, your videos are of very high quality

@Grant_S_M

8 жыл бұрын

100% agreed! Nick's vector tutorials are the best of this type of any I've encountered, including the ones made for coreldraw, illustrator, etc.

@nadinewhite993

8 жыл бұрын

Ditto

@LogosByNick

8 жыл бұрын

Thank you! Quite the compliment. I think this channel has the potential to reach 100k in due time, but a million seems like a stretch to me. Graphic design, especially Inkscape-related, is a very small niche. Maybe someday though, who knows.

@LogicInternet

8 жыл бұрын

Nick, if it does, it will be because of you and your tutorials, you really are setting the standard. I am honored to be a student of yours.

@thiagoguimaraes1951

4 жыл бұрын

@@LogosByNick nah don't say it's it's a small niche. We do use and need graphics in general all the time, maybe inkscape yes but it's growing up even some inkscape features nowadays are better than 0n Corel Draw and Adobe Illtustator. Keep it up Nick, your channel is the best when it comes about graphics, logos. Thank you 4 the very high quality tutorials you are a genius and very good at what you do. Thank you once again. Such a masterpiece.

Dear Nick, Thank you very much for this tutorial. I can`t wait to give it a try!

Appreciate all that you do Nick. I think i just found my new side-hustle.

Hello Nick, thank you very much. Your tutorials are the BEST! Helps me a lot!!!

Great work you never ceazes to amaze, keep it up!

Great video, Nick. Thank you.

This is wonderful! Thank you for the content you do. Your content has helped me learn how to use Inkscape in a easy to follow way that has elevated my use of the program substantially. I'm still working on learning how the 'paths' work. The biggest thing I have a hard time following is determining when something should be made into a path, and how the different path functions interact such as when I want to take a shape out of a bigger shape, I struggle with making it do what I want. I watched your video talking about paths, but I still have a hard time understanding it. I usually muddle my way through something or find another way to do it, but I imagine using paths functions would be easier some times.

@LogosByNick

8 жыл бұрын

I wish I could help further than that, but it's hard to explain. I think you'll understand it better as time goes on and you use the software more. That was the case for me. I don't think I would've understood it in concept back when I first started.

Awesome tutorials,i learned so much this summer :D

@LogosByNick

8 жыл бұрын

Great!

Brilliant!

great as always. good tips

I love your videos, thank you :)

Thanks for your new good Tutorial. :-)

Nice video! I like it

me gustaría que si podrías hacer vídeos igual si re gim. tus vídeos son magníficos e aprendido muy bien de ellos. gracias

Great video! Is there another way to duplicate and paste on an axis; like you did with the dashes at 14:14? That method works well enough but I'd like smaller increments than the snap lock allows. (also it's time consuming). Thank you and keep up the great work!

Nice one

Can you make on the updated Inkscape? Great Video

Cool....Nice!!!

I have a question, at 3:34 you show a green with the red and the red outline But when I hold shift and select the red and then go to path union it still stays the same, it doesn't change like yours does after you select union, I still have have double lines selected showing after selecting union,

Thanks for your great tutorials. I use them to learn to use Inkscape. Can you tell met what to do when I am experiencing anti aliasing with objects with different colours? Say multiple triangles put together with white line between them. I used snapping tool. Thanks! Inge

@LogosByNick

8 жыл бұрын

Hi Inge, this is a problem I often have myself. It's hard to explain the solution by typing. There's a few different ways to work around this. I may post a video about this soon.

while adding the background to it how to add the background to the areas which are white

Can you show how to make line at logos, just like that bike you made ?

Thank you for your instruction. I was also wondering if the tic marks added at minute 15:00 could be done by stroke to path? Just wondering if there is a way to multiply a single image to create a design path. I also wondered if the compass rose directional initials could be added by a text to path step.

@carloscardona6587

10 ай бұрын

you mean a Pattern along Path effect? possible, u need to clipboard the stroke u want in a circle pattern n align between outer circle border. Wut I tryna figure is the dash pattern number in 1.3, as its not in this older version

I am a big fan of your work, I was wodering how do you put the logos on textures and objects (make them look engraved) like the ones on you website under portfolio segment.

@LogosByNick

7 жыл бұрын

I use Photoshop for that. If you search Google for "logo mockup psd" you'll find tons of free templates.

@TJBarranger

7 ай бұрын

Use the "perspective envelope" live path effect and experiment with different blend modes on the logo fill (e.g., "multiply" works well for white garments).

Do you have videos teaching how to place a transparent logo onto a background, like the thumbnails of some of you videos? Is it completed in Inkscape?

Nick! You're a legend, thanks for this. But how do I unify all the strokes and fills so that I can just run a gradient over it and the whole thing blends in union?

@LogosByNick

3 жыл бұрын

You'll have to convert the strokes to paths (path > stroke to path,) then you can unify them all (path > union)

How do I make the dashes transparent so I can add it to a wallpaper?

hi Nick, having problems with Compass tutorial. on approximate position 3.40, the command fails to configure to Path - Union. running Win10 Pro (latest build) Have run the tutorial on two different machines, both with Version 48 and 91. Please advise Alan Washington

Hi Nick, I've lately come to Inkscape and my copy of the programme is the 1.2 version. I am having issues working along with your Vector Compass tutorial. I've drawn the rectangle and rotated it 45 degrees before selecting the nodes tool then >Rt click>object to path>top node and drag up. Scale down?Rt click>Duplicate>fill Red>move to lower level. When I click the top image and apply a stroke>filled Red. Then >path>stroke to path> break apart> union. The issue is there seems no way of knowing what has happened, If I select the inner shape and attempt to move it up to cover the flat apex the entire selection moves. A bit further along, when after moving the green bit up and selecting the nodes tool there are only three nodes one at the top and the two bottom nodes of the green shape. Deleting these bottom nodes results in the shape bowing outwards and looking nothing like the tutorial. Could it be that my later version is not fully compatible with the version on which the tutorial was created?

Hello nick. Firstly, I love your videos! Secondly, when I try to take the green triangle and make it the point and union it and the red one, inkscape tells me that one of the objects is not a path. I can't figure out which one isn't nor how to make it a path. Furthermore, how do I get Inkscape to make the rotation more "snappy" like yours? Where when you rotate the box, it snaps twice until you let off the click.

@WillE86

Жыл бұрын

Hi, you probably don't need an answer anymore, but for anyone else who comes across this and has the same problem. In my instance, it was the first duplication that didn't break apart and unionise at 2:40 in the tutorial, which I believe caused the problem in unionising at the later stage. I overcame this by selecting the duplicated object at 2:40, going to Extentions > Arrange > Deep Ungroup. I then used the union tool to... well... unionise them.

Please someone respond, how did he get the white part of the compass transparent? I have been trying everything for hours and i have no clue.....={

What software do you use to film your screen and make these tutorials? thank you. I followed all the tutorials you have achieved and I applied. there are really very interesting.

@manan09ful

8 жыл бұрын

let me know if you find something

@LogosByNick

8 жыл бұрын

It's called RecordMyDesktop

@Linfographiepourtous

8 жыл бұрын

Thank you so much ! I love your tutoriels.

Really good work Nick. Why do you use Inkscape instead of Ai? Which program is better if I wanna design for Tshirts? Thank you.

2:40 not working for me.

Why are you using 0.48 when 0.91 is out? I just tried 0.92. It has some amazing new tools such as mirror and perspective transforms. You have to compile to get 0.92. Inkscape has come of age now. A really fantastic program.

@LogosByNick

8 жыл бұрын

I like 48 better for a variety of little reasons. I've read about version 92 and I'm really excited for it.

@ryanstark2350

8 жыл бұрын

I'm on Archlinux which is quite good for testing cutting edge versions. I've played with 0.92 for a bit now and some of the new features really advance the capabilities a lot. It also has gradient mesh editing where you can bend objects and paths around with four way colour gradations. I just found out that this is also in 0.91. If anyone wants to try it, just do an internet search for "How to Unlock the Gradient Mesh Tool in Inkscape" and you'll find out how to get it working. However, I can't actually recommend 0.92 yet. I've encountered two major problems. Text spacing between baselines appears to be totally messed up and 3D boxes causes an instant crash but it is great to try these other new features. Text is obviously fairly critical so that's a show stopper for the moment.

It's great that on each video, you reveal small, cool tricks. Thanks man! By the way, I'm wondering if you are on Instagram? There is an account "logosbynick" but that doesn't some like to be yours.

@LogosByNick

8 жыл бұрын

No I'm not on Instagram just yet. That account isn't me.

@2012potter

8 жыл бұрын

Don't you consider making one? Because, I think you can make a pretty decent audience there. Your work deserves much more! As a suggestion, I think it would be super cool that you post a sped-up version of new videos you put up here on Instagram, like a 15s one. When you see that real quick, and what it turns to in the end is fantastic and pretty persuading to follow!

@LogosByNick

8 жыл бұрын

That's a good idea. I may set up an account soon.

Anyone having issues with the path >union step(green shape to red) in 1.0?

@tassossynerlis7222

4 жыл бұрын

Same here.

@davidkingsley8940

3 жыл бұрын

Yup... I'm running iS 1.0.1, and having issues. It keeps telling me that 1 of the objects isn't a path. Trying to make it a path doesn't work either.

how you get that cool looking theme on inscape?

So fast oml