Thank you so much. I've been waiting for months for a real review of this machine. Very much appreciated!

I can’t wait till I start an apprenticeship with a tattoo company!!!! Thank you for inspiration!

I am so glad your back. Really enjoyed this video and I will be trying this out.

@AnrijsStraumeTattoo

4 жыл бұрын

Thankyou

FINALLY IVE BEEN WAITING ON THIS 🖤 you are my inspiration man!!

@AnrijsStraumeTattoo

4 жыл бұрын

Thankyou

@parismanson2069

4 жыл бұрын

Anrijs Straume Tattoo your reply is my Christmas gift thank you so much! 🎄I really wish to meet you one day!

Interesting design, 💗 that chuck/vice too & that it uses traditional needles/tubes. Great review thank you.

Hey anrijs, For lining you need to try the 3.7mm stroke excenter and black pin, about 13v. And for cartridges remove the return spring. It's an amazing power liner and packer, it's a shame they don't simply put the 3.7mm excenter in the box. Like you said it was announced as a power liner, so it Whould have been nicer if we shouldn't have to buy an additional stroke excenter to get the full potential out of the machine. Best regards :)

Great video! I feel so informed! I think its cool how you do these reviews. As for more videos id like to see? Anything you feel you want to put out there! Maybe a new tour of the shop? Or the products that are your go-to's for tattoos at the moment! Your top favorite tattoos for 2019? I will watch anything! A day in your life! 🙏🏼🖤💀 also hi to the straume family!

@AnrijsStraumeTattoo

4 жыл бұрын

hehe. Thank you for positivity. I believe tour in the shop will be boring one to make, and it's not really my studio to do one. On my wife's channel there's lot of blogs with my daily life too. I will think about go too products, but pretty much everything I use I already done video about it. Hopefully more videos coming up soon!

Hi!! I'm confused, I'm noob. Which one to prefer one out of the Eclipse, Nano or Xion?!

I’m so glad to hear your review on this one. I bought one from Australian Tattoo a Expo back in September. I did a cover up straight away so I could experiment using cartridge. The shading and colour definitely worked well but lining with was a little difficult, I also changed the tension exactly as you said - but like it was not going in enough. I outlined a back piece and used traditional (metal grips) set up, I had machine running at 11v, the pick up was great. Machine run smooth, no noise or shaking. not really whatI want to like at all the time. After many pieces, I’m happy to say it’s my preferred shader machine. I haven’t yet found the perfect lining set up. Thank you 🙏 jazzy_fame WA

@AnrijsStraumeTattoo

4 жыл бұрын

Great to hear with metal grips it worked better , I will still have to try it more. other artist mentioned in comments removing spring can make it less softer and more punchier too. will have to try that too. I guess too soft machine is not the worst problem. ussualy it's other way around, hard to find smooth soft shader. This will deffo be the one.

Im so happy your honest

Time lapse videos is a good idea. I love watching your content, even tough I don't know anything about tattooing and rotary machines yet😁.

@AnrijsStraumeTattoo

4 жыл бұрын

Thankyou

@edrios04

4 жыл бұрын

lmao forreal

I think the needle position its down for the pressure, if you bend the needle maybe works better

Did you change the cam to make it hit harder?

I agree with the fact that it hits too soft. Its confusing to me because i’ve seen videos where it can push huge liners but even when I changed the bar it still hit softer. I reached out to Inkjecta and was told to take out the spring and start at 11volts-15. I haven’t tried it with those changes but maybe it’ll help

@AnrijsStraumeTattoo

4 жыл бұрын

yeah. same.. Thanks for the info, I might try that, maybe it will be game changer then! I think I'll have to remove spring anyway for use with cartridges anyway.

He’s back we gonna tattoo together someday

Hey man! love your vids! ive had this machine for a bit, hated it for soo long , finally sold it just to buy something trustworthy :P but i loved the design.

@AnrijsStraumeTattoo

4 жыл бұрын

haha , yes. I was a little disappointed when I first tried it, but now I'm getting used to it and I do like it. Still might sell it too in few months too.

Hey man I really love the videos you put out can you do a update on the best amazon kits to practice on fake skin not to tattoo on people or a update on the best machines you recommend to use on people with links I would really be happy to see a video like that !

@nicolerok9100

Жыл бұрын

Hate to burst your bubble but he’s not the guy who’s gonna reccomend Amazon machines, nor would any artist.

Hi Anrjis, I often follow your videos which are always a very useful help for those who are beginners, thank you! I started with a Flite Nano and thought I would add a machine for the lines. I had thought exactly about the Eclipse so as to work on a balanced voltage with the Flite. People like Jenna Kerr say Eclipse makes lines like butter and attracts me very much. From what I understand, it works great even with cartridges. The machine has been on the market for about a year. I'm curious to see it in action, also because it's very expensive. I am impatient for someone to show on video how he works on skin. Thanks for all

@AnrijsStraumeTattoo

4 жыл бұрын

I'm sure there's many videos of how it works on their instagram what you can check out. I don't think it's that important personally. as even if there will be some good videos how people line and shade with these. once you get it yourself you might not be able to achieve the same result, as it all depends on artist / needles / tubes / preference / speed / voltage etc..

@antoniocalo4213

4 жыл бұрын

@@AnrijsStraumeTattoo You are absolutely right! Thanks a lot for the answer

@robbysantos7271

Жыл бұрын

l

Awesome....

This machine looks like if a dan kubin and an inkjecta had a baby lol Nice videos man !

@AnrijsStraumeTattoo

4 жыл бұрын

haha , yes! best machine description. works about the same like it looks too

@ThatTattooGuyOfficial

4 жыл бұрын

Anrijs Straume Tattoo hahah awesome

@dom.wtattoos7489

4 жыл бұрын

I was thinking of what two machines I thought this was because I held it in my hand today off the republic truck, and he explained the specs. Definitely your description dan kubin x inkjecta lol $750 I don’t know about that to go back to standard needles and tubes

Hello Anrjis. I just wanted to say even if I am not a tattoo artist I really like watching your videos but I feel like you should upload more like time lapse ones with your work or something to actually attract more people to your work. I don’t know if you really focused on that but even if u don’t it would be something refreshing and could give us some more content to watch. Thank you for your work and I hope all the best for you man.

@AnrijsStraumeTattoo

4 жыл бұрын

Hey. Thanks for your comment, and checking out my channel. I do plan to add few more time-lapse videos, but my main goal for this channel is to help other artists with some advice , reviews , tips and in general useful information about what I learn myself over the years. I'm not looking to create entertainment content as I believe youtube already have millions of videos like that.

@maxion107

4 жыл бұрын

Ok I understand now. Thank you for you answer. Wish you all the best and I’ll look forward for next videos. Take care

Can I ask you how many volts you use in eclipse inkjecta, for liners and shaders,? Can u share please🙏

@AnrijsStraumeTattoo

4 жыл бұрын

I think I tell in this video about volts, I don't really pay much attention to voltage , all depends on placement / design and needle grouping. it can change for me everyday.

Hey good to see you again man! I was waiting for your review on this. I was getting ready to order this machine. Which one to prefer out of the Nano and the Eclipse?

@AnrijsStraumeTattoo

4 жыл бұрын

I prefer nano, as I work 90% with cartridges. (I haven't tried Eclipse with cartridges yet, possibly it will blow my mind) but most likely I will still think Nano is better machine for the work I do.

@crushingization

4 жыл бұрын

@@AnrijsStraumeTattoo Sorry man I just saw your response! Have you tried it with the cartridge needles yet?

Are you thinking on reviewing the new neuma 4? I'd love to see what do you think about it. I've heard that is the best linner among the rotary machines.

@AnrijsStraumeTattoo

3 жыл бұрын

I only review the machines what I have. Heard allot good things about Neuma 4 , if I will get one of them eventually I will review it YES!

@bullsheeptattoo

3 жыл бұрын

@@AnrijsStraumeTattoo Thanks man. I'm from Portugal and unfortunately I learnt that it is quite dificult to get one neuma 4 specially now with the covid stuff! I dicided to go for the cheyenne thunder because is a very good machine for the price! I need a machine for lining among other stuff. You're a true inspiration bro, keep the good work!!!

@AnrijsStraumeTattoo

3 жыл бұрын

Thankyou ! YES , Thunder is a great fast liner and colour packer ! hopefully you enjoying working with it!

Спасибо

Hey how many hours total do you think you use that machine

@AnrijsStraumeTattoo

4 жыл бұрын

not too sure, didn't take a track of it. around 15-20 maybe

Good day. Wish you review inkjecta flite X1

@AnrijsStraumeTattoo

Жыл бұрын

Hey, If I'll ever get one I will make a review for sure!

@noxtanagnes

Жыл бұрын

@@AnrijsStraumeTattoo thank you mate following you always bless up

I line with Inkjecta nano @ 11.80v, you could probably line with it at 12

Why you don't show work process? Its really important

@AnrijsStraumeTattoo

4 жыл бұрын

It's not that easy for me to film it all by myself. I have included many work process in my previous videos, but I personally don't think it's that important. There's plenty of the work process videos online, if you do check out inkjecta or any machine company/builder social media, it will be many videos of process with their machines.

My mentor pulled the trigger and got this machine and he loves it. He lines with it on 10.2 volts. I personally dont care to line with an inkjecta, I have a flite v2 and a nano and they're my shaders and color machines. I personally like to line with my Dan Kubin Swingliners or DMC.

@AnrijsStraumeTattoo

4 жыл бұрын

that's cool to hear he loves it, I'll have to try to mess around with some of the setup and see if it will be more punchier. But yeah I don't think there's many rotary machines what can line better then Kubins.

Pahengi Ng machine 😊

You have it set up wrong in video. The needle is rubbing the bottom of the tube. And the tensioner too much pressure. No bend in needle!? It's brushless so it needs more voltage around 12 upwards

@AnrijsStraumeTattoo

4 жыл бұрын

This was for quick demo setup, not tattooing or how to , wasn't paying much attention to how needle goes or if it even was bent or not. 12 volts for brushless machine might be your personal opinion, not the actual need. There's many brushless machines what works perfectly fine on 8-10 volts. or even lower.

@liveforeverclub8254

4 жыл бұрын

I understand but I'm just on about the reason you say you don't like lines with it is because the cycles per second wer not high enough to comfortably line.

If u ever get bored of this one/find it's collecting dust...please think of me lol💗

Hey, i loved this video. I am buying a tattoo machine, it would be my first one. Previuosly i had trained a little bit with oldschool non rotary one, wich takes regular needels. But nowadays there so many types and models of newskool machines that it gets me so confusing. I am dont know where should be my starting basic point. From this video i have a feeling, that this injekta machine could be the perfect base for begging. I would love if you could make a video, explaining a little bit types, designs and pros and cons of most popular tattoo machines. Just get some basic explanation what would are the main differences and what could be the best for the beggining. Moneywise, i would better pay more for the better product, but not crazy money, and definite.y not the cheapest options. I would love to see your opinion. Thank you;)

@AnrijsStraumeTattoo

4 жыл бұрын

Thanks, Like you said there's so many types, it's almost impossible to make compare videos like that. Hundreds different machines nowadays , and thousands of artists with experiences , opinions and preferences. What will work for me , will not work for many others and what I think will be best machine can end up to be worst machine for others. I do not advice start tattooing from home. if you have apprenticeship already - I do always say try to talk to your mentor about machines / needless / other supplies etc.. as they will be the ones who will help you out with right guidance. Good luck with everything.

@zygistomk

4 жыл бұрын

Anrijs Straume Tattoo i have no mentors only some friend who had a cheap ebay machine and tatooied his leg a bit and i was just playing with the tool on some oranges, i am doing grafitti and drawing as long as i can remember. Ok, my question is - is this inkjet the good base to start with?

@darylhadleigh4868

4 жыл бұрын

zygistomk no

chester bennington is alive lol😅😅✌✌

Give me one :v

Okay okay nice review but red gloves? Pikete man

Делай и русские обзоры ) не игнорь

@AnrijsStraumeTattoo

4 жыл бұрын

unfortunately I cannot find time to do more videos in other languages. also it is extremely hard for me to talk about tattooing topics, parts, the way it works or machines in different language, as I learned it all in English myself, and lot of things don't translate that easy.

I dont like this machine at all. I feel like the only people who do ,use cartridges. It sounds fine at low voltage, after 9 volts it sounds off . Struggle to line with. The adjustable flex pin snapped in half after a month of use.

@AnrijsStraumeTattoo

4 жыл бұрын

ohhh sucks, did you sent it back or got any refund? I haven't tried this machine with cartridges yet, as the reason why I got it was standard needles. but I will have a go with cartridge too, maybe will be game changer for me.

This machine is a garbage. I prefer nano.

@AnrijsStraumeTattoo

4 жыл бұрын

It's not a garbage, but I do prefer nano over this too.