I picked mine up on Amazon with a coupon for $73. Very pleased.

Great review. Straightforward and clear. Thanks

Wow, absolutely amazing review. Everything and more that I needed to know. Thank you very much 🙏

Great video, I was stuck in setup, and with your help I managed to make it. Cheers!

Good review, thanks

Goed uitgebreid review, dank hiervoor

Awesome video! Very informative, specially on how to set up the bluetooth and wifi. I ordered this thermometer after watching your video and Amazon had it with $50 dollars off, so I feel this is a bargain.

I think I have a lemon. Temperature readings in icewater were about 8 deg F too low. Room temperature readings were 4-5 F too low. I calibrated using ice water but after doing that readings at 160 deg were way too high. I wound up setting calibrations back to 0 and now it seems fairly accurate at typical meat temperatures. I'm going to exchange this one for another one, hopefully that will solve the problem. Feature-wise, I really like this unit, but a thermometer that isn't accurate is kind of useless.

Excellent video for setting up the Inkbird IBBQ - 4BW. However, water boils at 212°F NOT 112°F !!!!

Just noticed that in the manual, under specifications, says "Calibration temperature range: -7C to +7C (-12.8F to +12.8F)." First, -7C to +7C does not translate to +/-12.8F. The corresponding F range would be 19.4F to 44.6F. But the question is, what does this mean? Is it saying that you should calibrate somewhere in this range? If so I assume they want you to use icewater and calibrate at 0 C. I calibrated mine at about 130F because that's my temperature range where I need accuracy.

@GoShindig

Жыл бұрын

Hi Jim, I can see how this is confusing. -7C to +7C doesn't mean -7 degrees to +7 degrees, it means a swing of 7 units of C in either direction. So for example, if the temp is 32 degrees a swing of plus or minus 7 degrees would mean you have a range between 25 and 39. When you do the ice water test if your probe reads between these two values you can calibrate it to be 32C. For calibration, you can only move the original reading up or down 7 degrees, which should be enough. As for your statement "-7C to +7C does not translate to +/-12.8F. The corresponding F range would be 19.4F to 44.6F." again, the -7 and +7 means units of temp. One unit of Celsius is equal to 1.8 units of Fahrenheit. So 7 units is 7x1.8 = 12.6

@pixelcontrollers

Жыл бұрын

@@GoShindig Makes perfect sense, thanks for that explanation.

hello great video thanks, can you help me? when I put it on charge after a few minutes it shuts down completely and doesn't charge anymore. does it happen to you too? Thanks in advance

@GoShindig

Жыл бұрын

Hi, I've had no issues with this thermometer. I have to say I have been lucky with all thermometers I have bought as they have worked as expected. But I always have a handful of people that tell me about problems they have had with their units once I do a review. So obviously no thermometer is 100% perfect and maybe you got a defective unit. Hopefully you are still in warranty and can return the thermometer.

@filippoz1976

Жыл бұрын

@@GoShindig Thanks for the answer, I changed two and the problem was the same. I contacted support and they told me that in order for it to charge and not turn off while charging, there must be a probe inserted

Just to let you know you said the boiling point of water is 112°F but it's 212°F Good video otherwise 👍

@GoShindig

2 жыл бұрын

Argh, Thanks Hywel, of course you are correct, a silly mistake from me, my bad.

p̾r̾o̾m̾o̾s̾m̾ 👊

Feet, Fahrenheit. Wtf