Love that you guys jump straight into Fusion and show a real life example.

Short, Direct to the point, followed with simple, clear example. Very helpful for beginners. Thank you

Love the young Howard Stark mustache!

This is a very practical example. Very typical issue you come across in part design for injection moulding. Nice work.

Dude, I don't know how much i can thank you! I am busy with a study project and it was breaking my ballz. Muchas gracias mustachas

your literally a life saver OMG THANK YOUU MY DESIGN IA is saved

NICELY EXPLAINED USING CHAPTERS.

Hey your ad worked! Great video. First youtube video I've clicked on from an ad.

nice explanation. Love it!!

Beautiful explanation

Good video bro! Very informative

Very good explanation. Good job

Thank you very much

Many thanks

nicely explained. the example was on point. I'd like to see some more f360 examples though

You forgot to mention lifters, which is afaik the most common way to solve the undercut issue after shut-offs, since they are cheaper than side-action and more flexible in placement.. Furthermore minimum draft angle for a metal-to-metal surface in the mold is typically 3 degrees minimum. 1.5 degrees for that shut-off is very tight. Wouldn't it also be simpler to just extrude with a 3 degree draft from the undercut surface through the bottom of the part. That way you dont have to create a sketch, and you don't have to use the draft command, so fewer features on your timeline.

This is great and interesting (as was the previous video). You do a good job and that's lovely! As a suggestion for this video and the previous one: adding a really simple simulation of the ejection will help a lot to understand how your solution actually helps. If you do compare side to side the initial model without shutoff and your result with a shutoff, I am convinced that anyone could understand that ;-) Anyway, you do a good job, thanks a lot. And now I am waiting for the third video ;-)

@ProtolabsMFG

3 жыл бұрын

Hi Thibaut, thanks for the compliment and feedback! We always strive to make the videos as clear as possible and we will absolutely consider your suggestion.

@samgoldfisher2526

3 жыл бұрын

@@ProtolabsMFG You do an amazing job ;-) ! Keep going, that really interesting

Fantastico!!!

thank you

As someone new to injection molds its quite confusing all the terms you mentioned. Anways Good job

Thanks

any videos that cover , tips to maintain uniform wall thickness ?

good and helpful , We are a company supply plastic injection tooling and moling

Wow I would like to say that I understood that but I definitely didn’t understand the undercut great quality thou

@ProtolabsMFG

3 жыл бұрын

Hi, sorry to hear that! Is there a specific part you would like to know more about?

@broughttoideas

3 жыл бұрын

@@ProtolabsMFG I don’t understand how the undercut made it easier to remove from mold

so something im working on is basically a box, but it would require a straight up hole (or two) in the side...seems like my only options are side action & changing the parting line, and changing the parting line would just create more undercuts...

Could you recomend a book to study about this?

But if you don't want a hole in the bottom of your part you need a side slide, correct? 😅

Why business I'd required for downloading this pdf. What if there a student need that kind of knowledge? Please do something about it... I am just a learner not a businessman.

Türkçe çeviriyide eklermisin ?

I subscribed to you... now give me a handbook

Is this Howard Stark 😂😂😂😂😂😂😂😂