Injection molding machine | small business ideas | Plastic industry | pvc fitting | Pakistan |India|
Ғылым және технология
in this video we will watch easy and cost effective manufacturing process off pvc fitting.
#Plasticproduct
#Pvcfitting
#pvc
#TechnicalPointsfa
#Adamjee
#Injectionmolding
#Businessideas
#Concealedfitting
#molding
#fitting
#pipefitting
#material
#plastic
#plasticindustry
#manufacturing
#manufacturer
#urdu
#hindi
Пікірлер: 424
Nice job 🥰🥰🥰🤗🤗🤗🤗👌
@TechnicalpointSFA
2 жыл бұрын
Thank you! Cheers!
No bad tho 👌 👏
@TechnicalpointSFA
2 жыл бұрын
Thanks
Great idea
@TechnicalpointSFA
3 жыл бұрын
Thank you! 😊
Good work
@TechnicalpointSFA
2 жыл бұрын
Thank you so much 😀
👍👍👍👍👍 anda memberikan saya inspirasi. Mempermudah / menyederhanakan sesuatu yg rumit. 🙂
@TechnicalpointSFA
3 жыл бұрын
Thanks
@lucianfrederick6007
2 жыл бұрын
i know Im pretty off topic but does anybody know a good place to watch newly released series online?
👍👍
@TechnicalpointSFA
2 жыл бұрын
Thanks
you are the best man! greetings from Argentina
@TechnicalpointSFA
3 жыл бұрын
My pleasure and thanks for appreciation.
Good job 👍👍
@TechnicalpointSFA
3 жыл бұрын
Thanks 👍
Good job
@TechnicalpointSFA
2 жыл бұрын
thanks
great work
@TechnicalpointSFA
3 жыл бұрын
Thanks
Good job 👍
@TechnicalpointSFA
3 жыл бұрын
Thanks for the visit
Sar main aapka bahut bada fan Ho
@TechnicalpointSFA
2 жыл бұрын
thanks
Great bro👍
@TechnicalpointSFA
3 жыл бұрын
Thanks ✌️
1 no bhai
@TechnicalpointSFA
2 жыл бұрын
jazakallah
u are great
@TechnicalpointSFA
3 жыл бұрын
Thanks
good job bro !
@TechnicalpointSFA
3 жыл бұрын
Thank you very much!
Doing great
@TechnicalpointSFA
3 жыл бұрын
Thanks
Nice work
@TechnicalpointSFA
3 жыл бұрын
Thanks
Cool from Kazakhstan 🙋🏻♂️🇰🇿👍🏼👍🏼👍🏼
@TechnicalpointSFA
3 жыл бұрын
Thanks for coming.
@4salakz
3 жыл бұрын
@@TechnicalpointSFA dude can you give me your number I wild like to made it in my country I”m trying for 1 year
@TechnicalpointSFA
3 жыл бұрын
@@4salakz why not +923000221390 watsup on this number
Kam lagat me banane wala product bahut achhe
@TechnicalpointSFA
3 жыл бұрын
Thanks for that.
👍👍👌
@TechnicalpointSFA
2 жыл бұрын
thanks
Good job brother 🇰🇪🇰🇪🇰🇪
@TechnicalpointSFA
3 жыл бұрын
Thanks a lot sir.
Nice yr
@TechnicalpointSFA
3 жыл бұрын
Thanks
At the beginning was hardship but later hardship turn into a money magnet billionnaire.
@TechnicalpointSFA
2 жыл бұрын
Thats true, this is the first step with very low investment.
👍👍from indonesia 🇮🇩
@TechnicalpointSFA
3 жыл бұрын
Thanks
Nice
@TechnicalpointSFA
3 жыл бұрын
Thanks
Masha'Allah
@TechnicalpointSFA
3 жыл бұрын
jazakallah bilkhair
Good.ok
@TechnicalpointSFA
2 жыл бұрын
Thanks
Amazing
@TechnicalpointSFA
3 жыл бұрын
Thanks for that
Good gob
@TechnicalpointSFA
2 жыл бұрын
Thanks
Thanks
@TechnicalpointSFA
2 жыл бұрын
Welcome
I think, if its industry can made by custom orders, it will be good for your industries
@TechnicalpointSFA
3 жыл бұрын
Yes
Nice machine @98jQ Made in Turkey
@TechnicalpointSFA
3 жыл бұрын
Thanks
@recephacbaba8351
3 жыл бұрын
@@TechnicalpointSFA kzread.info/dash/bejne/n5OHqculZZyemrQ.html
cool work!!! any chance to do same way the pvc fittibgs couplibgs, t line, elbow?? hpde, pp
@TechnicalpointSFA
3 жыл бұрын
sure
Home much pride thistip mizin
@TechnicalpointSFA
3 жыл бұрын
this is modified machine
विजेंद्र कोटवा नेबुआ नौरंगिया
We made mould for same product fully automatic with zero flash....
@TechnicalpointSFA
3 жыл бұрын
good
@TechnicalpointSFA
3 жыл бұрын
@Peter Kimaru Thanks for that
@premnazeer1638
3 жыл бұрын
May I know the automatic machine supplier details???
@gobindindustries-india1071
3 жыл бұрын
@@premnazeer1638 you can contact us any time for help +91 8802724604
I m interesting this type semi Automatic machine please I waiting your replay
@TechnicalpointSFA
2 жыл бұрын
Sir msg me on my watsup and sorry for late reply
This looks more like extrusion or maybe being more presice - intrusion (this is actually ENGEL’s name of the process of extrusion directly to mold). As mentioned, no good quality to be expected, but still works.
@TechnicalpointSFA
2 жыл бұрын
Yes you are right this is extruder machine and modified as per need of local/small (low cost) industry. Quality depend on mold or material quality sir.
@AF-fr8gp
2 жыл бұрын
@@TechnicalpointSFA sure, tool is always a case, but this is a separate topic. I rather meant no control under the melt, low process pressures, no holding phase. However, if not needed, then not needed. If quality is acceptable for the customer, then achieving more quality is a useless cost :-)
Did you make the molds and the extruder machine?
@TechnicalpointSFA
2 жыл бұрын
Yes sure.
Ye machine kaha milega or kitne rupe ka aayega ....please reply
Good work but instead of using one molding and machine you can use 7 to 8 molding at a time which can save lots of time and easy for bulk orders
@TechnicalpointSFA
3 жыл бұрын
yes sir this is manual and offset molding for low investment business and in injection moulding machine mostly make single cavity mould because of cores/sliders.
@MultiE250
3 жыл бұрын
Call me my no 7417567702
@igwenemechinemerem79
2 жыл бұрын
@@MultiE250 do you make molds?
@harrylotey3625
2 жыл бұрын
Machine's price?
@preciousplasticph
2 жыл бұрын
@@TechnicalpointSFA cores and sliders really makes the cost go up for a part like this if sent to a big commercial shop. easily 20,000USD for the mold for a commercial setup.. Which would make a investment of say 2000usd to 3000usd in your machine, increase to more than 40,000USD. All for a item that will sell the same if it is made on cheap machine or expensive machine. So yes good job. My only suggestion would be to wrap the barrel with high temp exhaust pipe insulation, and make sure the wiring is more safe
Nic
@TechnicalpointSFA
3 жыл бұрын
Thanks
Wow😍😍😍
👍
@TechnicalpointSFA
3 жыл бұрын
Thanks for that
@rananaveedahmed3826
3 жыл бұрын
Ap kanha per ho aour ye molding machine kitnay mai mil jay gi
@TechnicalpointSFA
3 жыл бұрын
Karachi ye machine 1 lack tk miljaegi.
@rananaveedahmed3826
3 жыл бұрын
Dai b sath ho gi ya sepret banwni ho gi Ap pls is per aik vedio bnao k is mai aour kon konsi dai fit ho gi i am interested in this business idea Thanks
@TechnicalpointSFA
3 жыл бұрын
@@rananaveedahmed3826 ok sir inshaallah jaldi hi apko detail video mil jaegi hmse rabta kerne k liye aap hamare number pr bhi rabta kerskty hen jo humne latest video me diya he shukriya.
can u say me wat is the name of the machine and were we can get it?
@TechnicalpointSFA
2 жыл бұрын
offset injection molding
We manufacture band heaters of these machines
@TechnicalpointSFA
3 жыл бұрын
ok got it
Тяжолая работа, видимо зарплата очень маленькая раз используют ручной труд.
@TechnicalpointSFA
2 жыл бұрын
Да, сэр, вы правы, тяжелая работа - тяжелая работа, но она полезна тем, у кого нет образования.По крайней мере, это то, что работает,И это именно то, что завтра будет на заводе.Большое спасибо за ваш ценный отзыв, сэр
Vaiya raw materials ke bare me boliye composition and name of the materials. Thanks
@TechnicalpointSFA
2 жыл бұрын
ok sir inshaAllah hm next video compounding pr banadengy
This is literally just the barrel of a plasticizing screw and extruder nozzle of a two shot press, with manual pressure.
@TechnicalpointSFA
2 жыл бұрын
yes sir
Slow but Sure, But it's very difficult to get the workers who want to work using the unit.🤭
@TechnicalpointSFA
3 жыл бұрын
its production depend on worker practice and expertise.
Bro this is not injection moulding process. You have modified the process half process is extrusion moulding and other half is injection moulding. Title is wrong.
@TechnicalpointSFA
2 жыл бұрын
sir this machine is offset injection molding and i'm also explain to every one this is modified machine and thanks for guidance.
what material used in plastic
@TechnicalpointSFA
2 жыл бұрын
PVC
The mechanical properties of the parts surely are effected by this process compared to traditional injection molding
@TechnicalpointSFA
3 жыл бұрын
yes but in local industry every thing allowed because lacking of knowledge.
@igwenemechinemerem79
2 жыл бұрын
Please explain what you mean.we learn everyday
@JavierChiappa
2 жыл бұрын
Lets be real, these parts are not used in a mechanical critical application. They just need to fit in the tubing and be a good insulator. Also, this process is exactly the same as inyection moulding. Maybe a more expensive mould can open automatically, but the part quality its the same
@preciousplasticph
2 жыл бұрын
@@JavierChiappa agree. The biggest issue with the video method is the occasional air bubble. For production however I would insulate the heater and barrel, and make sure the wiring is more safe, but otherwise it works fine for what they doin.
@ravindran8761
Жыл бұрын
For the intended purpose the strength and quality is adequate. However the production rate is less and cost of production will be more.
Pvc elbow can be made
@TechnicalpointSFA
2 жыл бұрын
yes why not
Assalmu alikum bhai machine india telagana my hona eskey barmey deatils hona
V slow process and hard work
@TechnicalpointSFA
3 жыл бұрын
yes because of offset injection molding
A nice job. Please how can i get these machine?
@TechnicalpointSFA
2 жыл бұрын
Thanks for the appreciation. first u can find single screw extruder (parallel screw) size 32/55 or any other small extruder then make mold or head setup for mold gripping.
Can u share some details about this
@TechnicalpointSFA
3 жыл бұрын
sure what type of information u need sir.
Dont feel so bad about my 20+ year old Cincinnati's anymore
@TechnicalpointSFA
2 жыл бұрын
In my opinion Cincinnati's machines is the best machines but costly
I am planning to set up this in NX software and machine at near workshop
@TechnicalpointSFA
3 жыл бұрын
Sounds great!
Were can i find z machine
@TechnicalpointSFA
3 жыл бұрын
This is modified machine. for this machine you can find used machine dealer and check single screw extruder for this setup.
Tell me price of machine because I have PVC recycle material so thought start here.
@TechnicalpointSFA
3 жыл бұрын
Sir this is modiefied machine if u have single screw machine then make die head only.
Good job sir. Do you sell the hand moulds?
@TechnicalpointSFA
3 жыл бұрын
bana kr desktey hen
@moseskinuthia6314
3 жыл бұрын
@@TechnicalpointSFA I don’t understand the language please.
@moseskinuthia6314
3 жыл бұрын
@@TechnicalpointSFA How much?
@TechnicalpointSFA
3 жыл бұрын
@@tya201 what do you want.how can i help you miss
@TechnicalpointSFA
3 жыл бұрын
@@moseskinuthia6314 mould or machine?
Aslamwalequm bhai sahab Allahmdullih bahut good massallah is maćin ki pries and kya metered use kartehai bataye kyya home me karsakte hai
@TechnicalpointSFA
2 жыл бұрын
contact me on 03000221390
@mohammadabrar1368
2 жыл бұрын
@@TechnicalpointSFA sir tel number hai India ke hai dusre mulak ka bataye taki bat hosake
Sir pls can you share some details? I.e 1.barrel length, inner and outside diameter . 2.screw diameter. 3. motor horse power and their gear ratio?
@TechnicalpointSFA
2 жыл бұрын
dear why are you need this detail? are you machine manufacturer?
@pjelectrcian8391
2 жыл бұрын
Yes
@sudheerkumar6170
2 жыл бұрын
@@TechnicalpointSFA मुझे पूरी जानकारी और मशीन दोनों चाहिए
@TechnicalpointSFA
2 жыл бұрын
@@sudheerkumar6170 किसी भी प्रकार की जानकारी के लिए मेरे व्हाट्सएप पर संपर्क करें.धन्यवाद
Hi it can work brass .and copper
@TechnicalpointSFA
2 жыл бұрын
yes sure
@Sumaiyatabasum303
2 жыл бұрын
I need this setup
@TechnicalpointSFA
2 жыл бұрын
@@Sumaiyatabasum303 contact on my watsup
how can i get one the full set process
@TechnicalpointSFA
Жыл бұрын
where are you from?
How much if I may buy the whole assy?
@TechnicalpointSFA
3 жыл бұрын
approx 1.5 lacks pkr
Bhainis mein automatic molding machine availabke nahi?
@TechnicalpointSFA
2 жыл бұрын
automatic machines alag hoti hen ye offset he.
Is bhai ka
@TechnicalpointSFA
2 жыл бұрын
not available
Dude as a Injection Molding Process Ingenieur, it hurts my Eyes.
@TechnicalpointSFA
2 жыл бұрын
yes sir i agree but its local setup with low investment.
This is very old hand operated machine now there are hydrolic operated machines present
@TechnicalpointSFA
3 жыл бұрын
this is semi auto and modified machine
@your_friend8216
3 жыл бұрын
My friend have a similar but more advanced machine in his factory. In that you dont have to pull out the die or product piece. Everything is automated and operation is also fast. You should make a video on that machine too
Bro this machine And Raw materials price
@TechnicalpointSFA
2 жыл бұрын
this is modified machine and the machine cost is 2.5 lacs pkr and the raw material depend on formulation.
India me available hai a machine
@TechnicalpointSFA
3 жыл бұрын
Sir ye modified machine he simply ap ise bna skty hen
I need a template like this
@TechnicalpointSFA
2 жыл бұрын
kindly contact me on my watsup for further
@hadihoria5343
2 жыл бұрын
Hello, please tell me the temperature at which the PV melts. And tell me about the size of the wick with which the PVC is fused into this machine
@hadihoria5343
2 жыл бұрын
I own a machine and own a 1.5 inch elbow block. I need to know what kind of material this elbow is made of
sir.full video give me. Bangladesh can buy. How mach price.
@TechnicalpointSFA
3 жыл бұрын
ok sure this is modified machine kindly check single screw extruder in scrap then modifiy.
@PROGAMERrt107
3 жыл бұрын
very good and cheap way to make
Share me raw material mixing video of this product
@TechnicalpointSFA
2 жыл бұрын
yes sure after some time i'm start compounding videos
@samiqra1538
2 жыл бұрын
@@TechnicalpointSFA thank you
@TechnicalpointSFA
2 жыл бұрын
@@samiqra1538 My Pleasure
Full details for this business...
@TechnicalpointSFA
3 жыл бұрын
kindly contact on my number.
@vinayakmote8389
2 жыл бұрын
@@TechnicalpointSFA give me your number
I need that mold, it cost how much?
@TechnicalpointSFA
3 жыл бұрын
sir its hand molding mold and i think its manufacturing cost around 1 lack.
@user-yi3du1uh6v
3 жыл бұрын
@@TechnicalpointSFA Where is I find that machine
How many. Price????
@TechnicalpointSFA
3 жыл бұрын
machine price is approx 4 lacks pkr this is used and modified machine.
Kis city mey hay yeh setup?
@TechnicalpointSFA
3 жыл бұрын
karachi
@SurenderSingh-se1ib
3 жыл бұрын
@Moin Akhtar 009068585047
Hi, please get in touch with me, i am interested with the machine and moulds
@TechnicalpointSFA
9 ай бұрын
Sorry for the late reply. sir if you need any thing kindly contact on +92344-2614146.
Die kaha se design hu ha
@TechnicalpointSFA
2 жыл бұрын
sir kisi bhi mold maker k pass sample leker jaengy to wo sb kerdega
I need this machine plzzz
@TechnicalpointSFA
2 жыл бұрын
where are u from sir?
Sir muje is mashin ki jankari chahiy
@TechnicalpointSFA
2 жыл бұрын
ji bhai kia pochna he apko?
Sir how meany prise. Please deatels. I'm frome sri lanka
@TechnicalpointSFA
2 жыл бұрын
dear kindly search your nearly used machine dealer and check prices of the small single screw extruder machine. i think this machine price approx 2.5 lacs used and this type of mold approx 2 lacs pkr.
Aap Khan sy han
@TechnicalpointSFA
2 жыл бұрын
karachi se.
Junction box die want sir please help me
@TechnicalpointSFA
2 жыл бұрын
kindly contact me on my watsup.
@chandraateluguonetv6997
2 жыл бұрын
Cell no give me
All flashes, and need to be rework
@TechnicalpointSFA
3 жыл бұрын
yes because rough used of mold.
@minatonamikaze7489
3 жыл бұрын
@@TechnicalpointSFA i think these slider is radius, or pressure clamping is not so strong
Bigli p chalti h ya gees pe
@TechnicalpointSFA
3 жыл бұрын
Bijli
@munabhimunabhi8810
3 жыл бұрын
@@TechnicalpointSFA 2phez ya 3
@imransadiq4179
3 жыл бұрын
Please tell me is it single phase or 3 phase and also tell me how much KW of this machine.
machiene and dies kahan se milen ge and kitne ke
@TechnicalpointSFA
2 жыл бұрын
Machine used me is weqt taqreeben 3 lacs ki milegi or die as pr need banegi kam se kam bhi 1.5 lacs ki.
ANDHERI KURLA ROADPAR YE SAB MASS PRODUCTION MAIN MILTA HAIN ULHAS AGAR 1,2,3,4,5.MOULDS KA BAPBHI MILTA HAIN
@manaskupradhan1988
3 жыл бұрын
Contact number send kijiye I need
@manaskupradhan1988
3 жыл бұрын
Send Ur contact number
@TechnicalpointSFA
3 жыл бұрын
03000221390
Bhai hamko chakli mekar machine plastic ka 1000 pic lena he
@TechnicalpointSFA
2 жыл бұрын
bhai chakli mekar se kia murad he apki?
Machine kahan se ban jae gi?
@TechnicalpointSFA
3 жыл бұрын
sir ye search kerni hogi mil jaegi
Ye kya banaya he apne
@TechnicalpointSFA
2 жыл бұрын
electrical conduit fitting
How can I get that mould
@TechnicalpointSFA
2 жыл бұрын
Contact with any mold maker
@ahimbisibweherbert1977
2 жыл бұрын
Anyone you can link me
@TechnicalpointSFA
2 жыл бұрын
@@ahimbisibweherbert1977 where are you from
Machine price
@TechnicalpointSFA
2 жыл бұрын
approx 4 lacs.
Its old technology
@TechnicalpointSFA
3 жыл бұрын
yes but its low cost option.
Ye automatically machines v aagayi hai iski wo v saste me
@TechnicalpointSFA
3 жыл бұрын
ye modified machine he isko offset molding kehte hen