Soy de Perú excelente trabajo seguiré viendo🙋

Great book for a beginner . kzread.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ this book really starts from the beginning, as in it explains what basic tools are and how to use them. But when it gets to the art of creating joints and how and when to use them this book really starts to teach you something. At least that was my experience.

@EdwardLorreto

2 күн бұрын

We don't see your video here.

Hola me gustó sus trabajos y como lo hacen aprendo mucho que arte saludo el que hizo esta mesa👍😘⭐⭐🙋🙏🙏

@EdwardLorreto

2 күн бұрын

Gracias a dios

great skills

Sempre um trabaho excelente 😊

As a Woodworker i can tell you that your videos inspire me!! Thanks

Muito Bom, lindo demais 👏👏👏👏👏👏👏👏 Brasil 🇧🇷

Muy bonito y excelente trabajo me encanta

Como sempre, um excelente trabalho, muito bom, muito bonito

I like the simplicity of his craftsmanship not flashy but doable

Beautiful table, but that vase sitting on it at the end of the video? A work of art for sure. The table is as well. Very nice. The music at the end fit well.

Though I am not a carpenter and also have no knowhow about the equipment used in this video but I inspired with the skill of the gentleman. Keep it up. GOD blessed you.

Very nice job ,beautiful work 👍

The work is hard but great, what products do you usually create, where is your workshop

Wish I had his skills. I did cring at his hand/thumb placement using the jointer. Also when screwing down the tops didn't seem concerned with wood seasonal movement accross the grain.

Muito bom, parabéns! 🇧🇷

Totally stumped me when you placed the legs on the top...looks like two coffee tables stacked. To each his own but the table without the top section looked great.

@1966sanya

2 жыл бұрын

Exactly.

Parabéns e Gratidão por compartilhar irmão!!!🙏🌞

Very nice...parabéns! Muito bom 👍 (Brasil, Londrina, PR)

Mantab 👍

Muy bien hecho carajo!!

Комментарий в поддержку канала и ролика, а также труда мастера. Класс!!!!!

Just the amount of glue he uses would do my budget in.

@curt5296

2 жыл бұрын

Me too!! Where does he get all of this scrap wood for his builds?

@kevinfernando749

2 жыл бұрын

Los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a los a losa y no me deja ara a nadie aquí en el celular y no me deja ara a nadie aquí en el celular y no me

@Xyntax

Жыл бұрын

@@curt5296 it's his bread & butter for living

@randymatthews8750

6 ай бұрын

Beautiful Work.

Splines between boards should not run full length of the joints to hide the splines at the ends. Table top should be fastened from the bottom, no need to ruin the table top. If they had planned on filling in the sides of the bottom there was no need to complicate the process of using 2 batons then filling it in later, they could of just constructed solid sides to begin with and add trim after. Personally I thought the table looked better without all the trim and open sides or the lathe turned columns. Even when they clamped up the tabletop it was warped.

@PimptatoPCs

Жыл бұрын

It's paint grade. There's no way that it's nice enough for just clear lacquer.

maravilhoso meus parabéns ....valeu

A very high level of skills displayed here...

Muito bom trabalho parabéns pra vc 🇧🇷🇧🇷🇧🇷🇧🇷

Excelente trabajo, saludos desde Veracruz, Mexico.

Awesome skills you have and I’m hooked on your videos however it would be better if you could supply the building plans with all measurements and materials required so others can try to construct these items… 👍🏻😁

@Exiledk

Жыл бұрын

Can't get your own head around it, huh?

@ningsihharto6822

10 ай бұрын

@@Exiledk pnm

Good I like your skill😍😍😍

Muy bonita me encanta tu trabajo. Estoy aprendiendo espanol.

Nice design. Accurate woodworking. Cheap timber.

Просто 💣, очень красиво ... 👍👍👍👍👍

👍

Very nice. Good looking and very sturdy table. You have very skillful hands. Much respect. Art from Ohio

Nice work. Would be nice to see you be safer with yourself too.

Ну можно ещё полки выдвижные сделать.)))

Grandes Parabéns 👍

creative . good job👍👍

Very nice video and injoyed watching a master kraftsman at work, thank you very much!!!

Hadir nyimak 🙏👍🙏

individual workshop helps to understand how to make goods, no rush no stress, just work

❤❤❤❤

I want the one on the bottom ...hahah it is very nice bro

All that hard work he made a table look like 2 tables

Mantabb sekaleee

I wish I had some of your tools and skills!

very amazing

так здорово почему то смотреть, как работают такие станки, так бы смотрел и смотрел, раз раз и готово. Спасибо.

Fantástico! 👏👏👏👏

Good job, I hope to do the same

Wouldn't the firmly screwed-on tabletop crack with humidity changes? No account for wood movement?

@Mitchlaut

2 жыл бұрын

agreed

@carolinadelacruzlopez3722

Жыл бұрын

​@@Mitchlaut d i'm67n no

@anitamarohnic9544

Жыл бұрын

Wood never dies

Great job, and great song 🤩 What a fellowship, what a joy divine, Leaning on the Everlasting Arms, What a blessedness, what a peace is mine, Leaning on the Everlasting Arms. Reef : Leaning, leaning, Safe and secure from all alarms; Leaning, leaning, Leaning on the Everlasting Arms.

Beautiful rugged finished work,superb

Excellent work, thank you.

❤❤❤ from Indonesian

Awesome work!

good joinery, hideous design!

This is a very beautiful table, i like everything about it, great job sir!!! Israel Perez viewing from Guatemala, C.A.👍👌

Skilled workmen, so excellent...takes many years to be efficient in the use of all those tools! Thank you.

@stormbytes

2 ай бұрын

You think THIS is skill??

@EdwardLorreto

2 күн бұрын

Amen

@EdwardLorreto

2 күн бұрын

@@stormbytes of course from the beginning you have to pay attention and pray to God for wisdom knowledge if you think you're something with out God your only lying to yourself you see utube you think you know everything on the contrary.wakevfrom your stupor.

So very excellent!! Well done!!

@stevepetruska2656

Жыл бұрын

Very nice great talent thanks for sharing

Your finishing sander is so strong.

Like 영상 잘 봤습니다!! 또 오겠습니다!!

very nice

SANA ako din me KUMPLETOng gamit 😅 ❤ madali po tlga ang wood work pag naka ayos na LAHAT

cool video!

Bonjour je vous remercie pour ton retour

Great video, nice skills and creative 👍

Best video

Numero uno! 👍

Muy buen trabajo, me gusta ver este tipo de trabajo real y concreto ya que es un mueble que cualquiera podria hacer, es algo REAL, lo unico que no me gusta es la calidad de las terminaciones, deberian mejorarlo para que aumente el valor de lo que fabrican, Los felicito, saludos

Muito Bom Parabéns Você

👍👍

Nice when you have all the machinery.

Amezing 😍😍😍

those earmuffs are 🔥

Outstanding and very beautiful craftsmanship !!!!!!!

*SUPER*

Good job❤❤❤❤

All the comments about who could do, can have who doing and plus the key board craftsmen with the usual critique who got no KZread channel proving they can do anything..Yet! This very talented bloke got a channel that shows he's doing what many of us cannot do! I definitely can't produce that quality of work likely can't name some of the tools or machinery he using either,..as I'm an electrician not a furniture maker! I applaud his skills though from one tradesman to another!

Beautiful work 👍

Put proper size of wooden length height &width in videos next time

Beautiful table and beautiful song.

Nice work. and now I need to get myself a lathe.

Красивый стол,не вычурный,приятный

Quiero aprender aser lo que más me.gust1

Love the glue up going together with what appears to be an organic home made style glue... the a few minutes later... Titebond!

Beautiful work.

Easy to make stuff when you have big workshops and all the gear.

@LawDawg717

2 жыл бұрын

One of my tools cost more than all of theirs combined,. Yet, they're still better craftsman.

@rastapete100

2 жыл бұрын

No it really isn't easy even with the proper tools, in fact he has rudimentary tools. It takes skill to use tools and the only way to acquire those skills is from experience. If anyone who hasn't made furniture before thinks that all they would need is the proper tools they are mistaken.

@robertforster9482

Жыл бұрын

I used to be a woodcutting machinist in a timber factory. Once given small amount of training on these tools I could get anyone making most of what is seen on here. Dont dis what you don't know.

Excellent experience. Like 👍.

Amazing skill amazing result, awesome

Bellezas de las bellezas! Y con pino! Mis saludos

Nice work.

Amazing work.. 👍👍

Amazing work.. 👍👍👍

I like this.

Karya yg luar biasa bos

Very good but, I will use two in the front.

Well done!

Ужас!!! Руки бы оторвать за такую работу.

@1966sanya

2 жыл бұрын

This is China. They have their own opinion about design.