Bro, this is a sick video, i was looking for some sort of a loop system that knows when the box is empty. This is a super efficient way to do it, thanks a lot!!

Awesome video, I used to setup 1 at a time, this helps a lot... Thank you for the video 🙂

Thank you sir, you were really helpful for me in how to setup the crafter!

@DRIFT9LE

Жыл бұрын

Happy to help you ❤️

It's funny that I found this video because I was messing around last night with a similar idea, but I was trying to have 4 BPs in the crafter and swap out resources. But I realized it would only work for items with different resource requirements. I just recreated this in creative mode and it works great! Going to attempt to do this on a real server this weekend and blow my teams' minds haha. Thanks for the informative video

@DRIFT9LE

Ай бұрын

you can also use one more sensor to trigger different type of resources to pull in and out of crafter, but its way more complicated. and its better to add just a second crafter

Very good and informative video, thanks man

@DRIFT9LE

10 ай бұрын

Thanks

This is insanely OP.

Wonderful guide ✨️

Beautiful. 👍

so i play on low pop no decay servers , just imagine how handy this is when u a SOLO , one wipe ive got 3x lvl2 work benches :D aspn U start crafting wall via automatic system there is no way back

This is brilliant

@DRIFT9LE

4 ай бұрын

Thanks!

Thanks for sharing! Works great as is, and is very useful for setting limits on crafting. But after trying to scale it up to craft more recipes I discovered an important limitation: it really only works if all the recipes have a total number of different ingredients up to 4. I didn't try yet, but I think it will also still be possible with this system to have more than 4 blueprints as long as the ingredients are the same (eg. many different ammo types). But if you try to craft for example, explosives and rockets on the same work bench, you will run into the problem of items from previous recipes clogging the auto crafter up and preventing ingredients for the new recipe from being received. I could not find a reliable solution for this, so if you want to automate a LOT of crafts, you will be better off setting up multiple workbenches that use recipes with common ingredients.

@DRIFT9LE

9 ай бұрын

thats correct it has a limitation of 4 materials to craft items. it will clog up the entire system if you add other BP's that make the toal of all BP's use more than 4 materials. Just put on another crafter and do a seperate system for this. ONLY 4 materials max for each set of BP's to craft

@lucahoffmann8695

9 ай бұрын

For rockets and explosives you only need one lvl 3 workbench because you can just put 2 auto crafters on one workbench (one on bottom and one on top) this way you avoid the clogging

@EMES365

2 ай бұрын

I saw a video that uses radio frequencies to time the crafting and fix that issue but it's complicated. The guy just shows you a tutorial of it working some parts of the build but not an actual tutorial on how to build it. You would have to screenshot images and try to replicate it. He was able to get eight items crafting on one workbench in a 1 by 1 grid. I'm sure he arranged the materials in a way that didn't clash too much. He also said the parameters for the exact material for that one particular item that was to be crafted so the inventory in the auto crafter would be empty for the next item.

Here before this gets big.

@DRIFT9LE

Жыл бұрын

Thank you for your kind words ❤️

Cool setup. Got one question tho, after the box that receives the crafted items (syringe+bullets), I would generally distribute that to 3 boxes (one for pistol, one for 5.56 and one for syringes). If I use this setup, the "buffer" box is used as the sensors, so it only stops crafting, when my final boxes are all 100% full, because it will keep pulling based on the "buffer". Is it possible to set it up in a way that it crafts X amount of items then stop?

@DRIFT9LE

9 ай бұрын

Not possible. U need to use sensor

@Niitz87

9 ай бұрын

@@DRIFT9LE I was able to do it :) Simply adding another splitter after the "buffer" box. Then you pull from that splitter to your final destination boxes, going through new conveyors that will have the limit you want in the "destination" box. With that, your final boxes will only pull the set limit, and the sensors work just as your video shows! Thanks!

@tassarna93

5 ай бұрын

​@@Niitz87u have a rustrican link?

Every industrial rust video: Me listening to Normal volume video… *youtuber takes out wrench tool* EARS BLEED PROFUSELY

@DRIFT9LE

8 ай бұрын

Thats the fastest plumber in scandinavia right there 🙋‍♂️

Will it still work if I put more than 3 BPs and add the required materials in the Industrial Conveyor lists?

@DRIFT9LE

9 ай бұрын

You can do it as long as it uses the same materials. if not it will clog up in the end with not the correct materials to craft the item

How much power minimum does the whole setup take? Will build it rn

@DRIFT9LE

Жыл бұрын

Under 15 i think, also remember when running from batteries its 80% efficient. If you have 2 small batteries connected in paralell with combiner u have 20 output * 80% = max 16 power

Great proof of concept for multiple BP’s but if your goal is to craft just 3 BP’s and one of them is a T1 BP you can just use 2 crafters on a T2 to make the 55 and meds and another crafter on a T1 with the only downside being needing to place a t1 somewhere but saving time and metal resources in the long run by crafting less electrical components

i dont get how u can change ur coler on ur wire i tryed right click

@DRIFT9LE

Жыл бұрын

Hold R

I just wish the industrial deployables were quite a bit smaller :/

@DRIFT9LE

Жыл бұрын

its quite OP so i respect that it has a bigger footprint IMO

@doxed64

9 ай бұрын

Place them as close to ceiling as you can so they're out of the way. Most deployables won't touch them up there.

5:12 フェイル左、パス右 12:29 最低個数1 0でもいい

I set this up exactly the same but mine just stops crafting. Even though it has more than enough resources to craft more.

@DRIFT9LE

9 ай бұрын

if you watch the entire guide and dont skip parts you will know how to troubleshoot the problem :)

@sebbiechu

9 ай бұрын

@@DRIFT9LE I watched the entire video and replicated what you did but changed the source from TC to a box instead with the materials. However, the blueprints don't swap with what material is left to craft. So If I wanted to make explosives I have the three materials but the blue print is not being selected.

@DRIFT9LE

9 ай бұрын

@@sebbiechu Did you remember to turn on the conveyors the first time? you need to turn on everyone.

@sebbiechu

9 ай бұрын

@@DRIFT9LE Also when I try the filter pass and filter fail not all the industrial converyor like up. Only one of them lights up for fail and pass.

@sebbiechu

9 ай бұрын

@@DRIFT9LE I've tried everything and followed the video exactly the same. At the end I just ended up have one item like explosives and once thats complete I will change the materials.

Mine won't cycle the blueprints it just keeps crafting and crafting and crafting. It won't even shut off when it meets the Max limits

@DRIFT9LE

2 ай бұрын

You have connected the wrong connections from the «sensors»

@EMES365

2 ай бұрын

@@DRIFT9LE I'll go over them again. I thought that was the case but I can't fix it. I bet they r reversed. Thank you. I'll try that. When you said it, I had an opihany.

@DRIFT9LE

2 ай бұрын

You also have to put it in MIN on the conveyor, not max

@DRIFT9LE

2 ай бұрын

@@EMES365​​⁠think about it like this: its the sensors who decide the amount of crafted units and tell the industrial crafter to transport the BP out. Your faulty wiring is 100% there :)

@EMES365

2 ай бұрын

@@DRIFT9LE crap. Which conveyer?

kzread.info/dash/bejne/ZpuuyqaOmZi4l8Y.html original

@DRIFT9LE

10 ай бұрын

Its not the same. It uses more power :)

Ты украл видео у руского ютубера woodcock он эту схему сам придумал и на 2 месяца раньше выложил. You stole a video from Russian KZreadr Woodcock, he came up with this scheme himself and posted it 2 months earlier.

@DRIFT9LE

8 ай бұрын

I dont view russian videos, anyway this one useless 3 less power and is better optimized.