super super helpful video, told me to choose inductive when having to detect metal that is filling a plastic tube.

Good comparison.. video helped me to choose which one is better for my application.

Is there a way to make the inductive senson work for glass?

Can i know the schematic diagram for this . How do you activate the capacitive proximity sensor ?

Well explanation, at least we know which sensor can detect what kind of objects.

how do I know the value of dielectric of each material ?

Nice video clip, keep it up, thank you for sharing it :)

thank you for making such informative video but here i would like to ask that will Capacitive Sensor work on flour/powder base material ?? If we install this sensor on Flour holding hopper and as soon as the flour discharges out of the hopper, will it able to sense it ??

hello, ma'am/sir, is there any way that the capacitive proximity sensor can only detect plastic components and does not detect the rest kf the materials that doest have any plastic components?

crown cork is stainless steel type of material then how it attracted by inductive proximity and refro reflective photo sensor?

Excelent demonstration

for the sensors, what brand do you use?

What is switching frequency of this inductive proximity sensor

could you tell me the model of the sensors?

very useful

nice dear briliyent

KZread is crazy. I literally watch a ton of videos on 3D printing and this never came up when everyone was doing testing.

hi bro how can you detect plastic on proximity capasitive?

How to wire pnp sensor in heating furnace

Can it be used as height controler

Well done

plz give me the circuit diagram of inductive proximity sensor which uses in this prjt.or give me picture of this circuit

Can glass inside water detected sensor

Can the capacitive detect organic waste?

What type of Ducts do you use Electrical tape for?

@matthewmeuleman5979

Жыл бұрын

Electrical ducting. You use it when slicing through it with a drop grinder to stop it from flying apart during cutting. Works a treat on anaconda conduit too.

How did you program the capacitive proximity sensor ??

@mjyanimations1062

2 жыл бұрын

you don't

Can use this sensor to detect the water inside the plastic bottle (LJC18A3-H-Z/BY 1-10mm Capacitance Proximity Sensor Switch PNP NO DC 6-36V 300mA )

Can it detect paper?

hello, can i see the source code. I have a problem with my project it needs to detect plastic using capacitive sensor but i dont have a code. I hope you will help me

@leyantivo4692

Жыл бұрын

hello, were you able to detect plastic using capacitive sensor?

Nice brother

do you have a tutorial on capacitive proximity sensor?

anyone knows what sensor can detect water inside the plastic bottle? thankyou

@slepax

3 жыл бұрын

Optical infrared water sensor

What is the sensor distance range in Inductive Proximity Sensor? Can you suggest any link to buy it?

@jollypanzu6975

Жыл бұрын

You can adjust the distance range of the proximity sensor at the back of the sensor. There is a screw which you can turn in both directions to get the the distance range.

@matthewmeuleman5979

Жыл бұрын

Also, there are different sensing ranges and patterns.

Please suggest which sensor can be used for liquid or chemical non contact type level sensors

@MariusCzardybon

Жыл бұрын

kzread.info/dash/bejne/jGqdzrKsqaWrpps.html

@matthewmeuleman5979

Жыл бұрын

You would want to use a differential pressor sensor with a wet leg.

Hi, can you recommend me a sensor switch that will start solenoid 110v

@jollypanzu6975

Жыл бұрын

Hello sir. You can use capacitive/indicative sensor depending on what you want. The sensor to command a 24 volts relay ( contactor), then the relay to command the solenoid valve.

Hello Sir, Can you tell name about Capacitive Proximity Sensors?

অনেক ধন্যবাদ আপনাকে

2:05 / 3:13 please answer does possiple use this sensor to measure different type of material plasic glass iron alumminium

@MOHDFAISAL-qw8mz

3 жыл бұрын

Actually... capacitive type has ability to senses almost everything...but inductive type is only for metallics.

@abdennabimorchid

3 жыл бұрын

@@MOHDFAISAL-qw8mz I know it, my friend. Capacitive sensors are based on the all or nothing principle. Are there any capacitive sensors that change the output signal (analog) according to each material detected? I need an analog sensor, please help me

@abdennabimorchid

3 жыл бұрын

the emblem that the capacitive sensor based on the all-where-nothing principle detects all types of matter but does not change the analog value according to each material

Keep it up girl 💪🙏

Please makr e car with node MCU+servo for steering

what is the output of the capacitive proximity sensor either Analog or digital??

@MakerTutor101

5 жыл бұрын

Digital sir

@justinfrank606

5 жыл бұрын

If digital, what will be the voltage ? same operating voltage and current used as the input to the sensor as the signal output ?

@MakerTutor101

5 жыл бұрын

it same operating voltage ( 5 - 36V) , Inductive Proximity Sensor Detection Switch LJ12A3-4-Z/BX

What type of sensor is used to detect paper?

@happymonk4323

4 жыл бұрын

capaticitive can detect anything

how bout detecting organic material such as paper, leaf etc

@jollypanzu6975

Жыл бұрын

Use the capacitive sensor

why is my capacitive sensor not detecting plastics

Super

ver short distance.. adjust more distance detection

Didi ye kese bnaye

what can I use If I want to detect only plastic and only iron? can anyone help me

@jollypanzu6975

Жыл бұрын

Hello sir. If you would like to detect only plastic, then use the capacitive proximity sensor. And for the iron use the indicative sensor.

@RoMecha_lb

Жыл бұрын

@@jollypanzu6975 hello, Thank you for your reply after three years 😀😀

megnet ko kon sa senser sens krega

@rahulkajle9093

5 жыл бұрын

hall effect sensor

Can you provide the code?

Hello! Just would like to ask for the source code used here in this video.

what is the name of sensor holder ?

@iamkhair8981

3 жыл бұрын

want to know too

Hello..I wanted the code and connection of circuit..can I get

@jollypanzu6975

Жыл бұрын

Every sensor has a circuit diagram on it.

is that a NO capacitive proximity sensor?

@MakerTutor101

5 жыл бұрын

Yes, NPN Capacitive Proximity Sensor

@AllAboutUs1996

5 жыл бұрын

@@MakerTutor101 Whats the difference between NPN and PNP ?

@MakerTutor101

5 жыл бұрын

Please read this. It would be better to let me explain :) forum.arduino.cc/index.php?topic=74830.0

the capacitive one nailed it.

Diodes, who needs them! Find: 'Circuit Solver' by Phasor Systems on Google Play.

@matthewmeuleman5979

Жыл бұрын

DC inductors often need them.

please can u share the src code?

@MakerTutor101

5 жыл бұрын

kzread.info/dash/bejne/h6ets6uAdMe3f7g.html kzread.info/dash/bejne/hIClzNGDg6ibebw.html

@danedward546

5 жыл бұрын

Maker Tutor thank you do u have src or tutorial for the capacitive proximity sensor? i need it so much please

Plz do u have code for this saperation detections

LJC30A3-H-Z/AY 1-25mm Capacitance Proximity Sensor Switch PNP NC DC 6-36V 300mA

I thought that capacitive sensors only reacted to non metal materials???

@ytfp

5 жыл бұрын

because his testing methods are faulty and he is holding non-capacitive objects with his very capacitive fingers. Thus detecting capacitance of his hand through conduction of the material.

@roseelectronics4582

2 жыл бұрын

@@ytfp her*

Water detect

Capacitive is too unreliable for most purposes.

@ikomu8907

4 жыл бұрын

true it detects much more objects but reliability and repeatability is another story :)

No proper view

That's not supposed to happen. The inductive proximity sensor shouldn't be that bad.