No video
Induction Heater run with Different Work Coils
This setup gets rid of the center tap on the work coil making it easier to try out different coil configurations.
This setup gets rid of the center tap on the work coil making it easier to try out different coil configurations.
Пікірлер: 7
A regulated bias voltage with RF shunting to ground for the gates sort of makes some sense, doesn't it? Otherwise one might feel preoccupied that these zener pairs would also behave a bit like noise generators directly feeding a high-power stage...
Hi, I would like to know if with the flat coil it is possible to heat a steel needle (approximately 5 cm long, 2 mm thick) placed vertically in the center of the coil .. Thank you
Nice
Does the 'stove top' coil glow at all? GREAT VIDEO!
@BrianDhvTinkerer
5 жыл бұрын
with the 2000 strand litz wire, the stovetop coil runs cold or just barely warm.
@BrianDhvTinkerer
5 жыл бұрын
here is the setup with litz wire:kzread.info/dash/bejne/mqF-kqeqaMqro7w.html
كيف عملت هاذهي الدائره توجد مشاكل بها