Awesome job & thank you so much :)

Tkasih tutorialnya....sy menyimak .

You can install it upside down GBJ25K BRIDGE RECTIFIER face up directly and then weld the legs

@MrKopylowicz

3 ай бұрын

Oczywiście

@roys9026

16 күн бұрын

No Because it heatsink side

Thank you for sharing God bless always☝🏻🙏🏻

Great !

Good thanks for sharing

Nice work..💪💪

Perfectly done! Thanks for sharing ☺️☺️☺️

@ErCanEverything

Жыл бұрын

Thank you my Friend🙂🤝🤝🤝

@ErCanEverything

Жыл бұрын

Thank you my Friend🙂🤝

buen video buena reparacion y buen tip ... gracias

@ErCanEverything

9 ай бұрын

Thank you🙏🙂🤝

thank you Sir for sharing and teaching. but I'm afraid I cannot do it because I'm not a technician. I don't have tools like that. and I don't know how to use it. maybe I will borrow from my friends and follow your video step by step.

Verry nice

Nice video bro ....

wow emezing

Thanks you sir for ur tios just few tols to use I have save my money to buy a new electric stove.🤝

@ErCanEverything

Жыл бұрын

I'm glad I was able to help you with this video.

Excelente video. Tuve el mismo problema y la misma solución 🤝

@ErCanEverything

9 ай бұрын

I'm glad if I was able to help with this video🙂🤝🤝🤝

Great job as always Brother! ✌️ And it is better than original 😜 PS: 6:42 i know this struggle very well 😅😂🤣

@ErCanEverything

Жыл бұрын

And the soldering iron cable was unfolded all the way 🙉😆

excellent job !

I need to do this

Excellent post, congratulations, I wanted to ask you a question. If the + and - keys do not work, possible damage to the control board? Thanks a lot!

Bom dia parabens muito bom excelente

@ErCanEverything

Жыл бұрын

Thank you my Friend🙂🤝

Los IGBTs se pueden dañar por que la señal de activación viene espuria desde la etapa de control PWM, igual los componentes de su circuito driver se pudieron dañar. Si se tiene osciloscopio antes de montar el IGBTs se visualiza la señal de activación. Otra situación es que los puentes rectificadores se dañen por baja tensión de red.

Sir, what kind of paste do you put in igbt, thanks

Thank you a lot for video. Which paste do you use for rectifier and transistor? Where did you by transistor an rectifier? Thanks for answer.

@romeobaron2649

3 ай бұрын

Silicon paste

👍👍👍

Hi Sir, greetings from Brazil! Thanks for your video. I’ve bought an Induction Heater Rice cooker from Japan, which is 100 volts. I want to use here in Brazil using 127volts. As the induction has a transformer to power the coils, Do you think it will be possible to use it as is? Or there are a risk of blowing all the circuit? Thanks again!

Good day sir, I have a Snappy Chef I had the same problem. No power from the start. I replaced the IGBT and Bridge Rectifier. I have power now but E0 error as its not picking up the pot/plate. I have check the 400V/4.7uF Cap (Broken) Also 5 resistors are very far from the resistance tolerance value. I am going to replace the capacitor and resistors. I hope that it will work. Any comments from your side would be highly appreciated. With Kind Regards

Shorted diode and IGBT

só usa um transistor igbt?

Thank you sir for your sharing. May I know what is the white paste use on the bridge rectifier.

@ErCanEverything

Ай бұрын

This is the thermal conductive paste.

Would the cause of the transistors burning out be because the device we unplugged too soon, eg before the fan had cooled those transistors down?

Buen trabajo amigo, lo que no entiendo para que el puente con los cables?

@izairdgh

11 ай бұрын

probablemente por que el integrado que ocupo no era el mismo y las terminales estaban alreves

I have a blown mains fuse that I reset. Forgot to use the lamp while repairing. The induction heater fuse is not blown. there is IC blown md12h. An there is T FUSE like resistor blown. What to replace the T Fuse with? I ordered IC from aliexpress

Hello what MOSFET and bridge rectifier can I use becouse I can't find exact match for the ones in my aobosi model I hope you can help

Tengo uno pero solo calienta olla pequeña no grande.?????

Bro i have a question can i make a induction warmer for mechanical parts with this kind of kitchen ?

@ErCanEverything

Жыл бұрын

First you have to remove the protection but it is risky because the coil works with high voltage. I made one around 600W but I don't know if it will work for you. kzread.info/dash/bejne/jKqGm5SBfNycobA.html

Will it be possible to make this induction cooker to work with dc power 12/24 or 48volts, using less complex applications. Greetings from Nigeria

@ErCanEverything

Жыл бұрын

It can work but with a smaller or the same size but rare coil. I even made a similar prototype 3:00 👉kzread.info/dash/bejne/nGxtqtSGlabclcY.html

@yusifsuleiman5502

Жыл бұрын

Thank you for sharing this, if I understand, it will not be possible to convert/change the same stove. You have to create a new one.

I have a buffalo induction hob. 3kw countertop I use in my cafe. It’s great but sometimes won’t turn on.. having to switch it off and on to get it too work. I feel it’s something we aren’t doing right. Any ideas???

@MrKopylowicz

3 ай бұрын

Kondensatory elektrolityczne w zasilaniu, utraciły pojemność, trzeba wymienić na nowe

Before replacing igbt ,points voltage not checked wrong impression.

You better off just getting a new one because this looks like a lot of work and know how

Location ng shop bossing

Abi kolay gelsin bendeki ocak filip flop yapıyor göz kırpıyor özelden yardımcı olabilir misin sebebi nedir sana zahmet

@ErCanEverything

4 ай бұрын

Teşekkür ederim, soruyu tam olarak anlayamadım

@muratakdemir1127

4 ай бұрын

@@ErCanEverything sosyal medya kullanıyor musunuz özelden video atıyım size daha anlaşılır olur

@ErCanEverything

4 ай бұрын

@muratakdemir1127 facebook.com/share/M8dGMG2YzSVthwJ6/

@muratakdemir1127

4 ай бұрын

@@ErCanEverything yazdım Facebooktun abi

Slayer please..,..

Do you need to put thermal paste on the metal sensor? Mine keeps having error that it doesnt detect any metal cookware on top

@TheAlexXxA1991

5 ай бұрын

That is not metal sensor, that is thermal sensor. That is why paste is there, to better conduct heat and have more precisely measurements.

@irbindey

5 ай бұрын

@@TheAlexXxA1991 thanks for your answer. Is that thermal paste? Or a different compound? I have one lying around for my pc

@TheAlexXxA1991

5 ай бұрын

@@irbindey it's thermal paste, but I don't think that will fix your issue. That sensor is there as safety and for setting temp. "The cooktop can detect whether cookware is present by monitoring power delivered. As with other electric ceramic cooking surfaces, a maximum pan size may be specified by the manufacturer, and a minimum size is also stated. The control system shuts down the element if a pot is not present or not large enough. If a pan boils dry it can get extremely hot - a thermostat in the surface will turn off the power if it senses overheating to prevent cooker failures and potential fires."

@irbindey

5 ай бұрын

@@TheAlexXxA1991 ik but it disassembled it was not sure what to putnthere

yeah,TheFuseShouldBlowToProtectTheIgbt.

Pasaron más de 10 minutos.

@ErCanEverything

Жыл бұрын

Let it be 11 minutes, if not 10 minutes.😅 In the first 30 seconds I showed you it doesn't work and I was ready at 11:30😉

Köprü diyodu tersini çevirip direkt takabilirdin...

I have no idea what he just did.

Music just killed me. Could not watch it with sound. LOL

@ErCanEverything

Жыл бұрын

🤠😄

@DjaniAgain

Жыл бұрын

🤣😂😅 Bob Marley style...

@ErCanEverything

Жыл бұрын

Bob Marley Faruk😄😄😆

The mf is not replying to comments. So mean.

@ErCanEverything

11 ай бұрын

Mf

Waste of time

@ErCanEverything

Жыл бұрын

👍

You have a parts