INCREIBLE invento extractor de rodamientos, bearing puller
como fabricar extractor de rodamientos , reciclar chatarra , idea increíble muy fácil de hacer @chandercreative
Жүктеу.....
Пікірлер: 81
@antoniomora8487Ай бұрын
No he visto el video pero ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴🚴👍 Está genial el extractor de rodamientos gracias por compartir tus conocimientos 🛠️📐🔧👍
@chandercreative
Ай бұрын
Gracias por apoyar Saludos.
@maxelrose1908 Жыл бұрын
genial justo tengo uno acá y se me había ocurrido lo mismo, lo busque para cerciorarme que nadie lo haya hecho, y encontré este magnifico video, genio me diste varias ideas, muchas gracias.
@chandercreative
11 ай бұрын
Gracias mi amigo
@francoruizocampo974612 күн бұрын
A mi si me gusta esta fabricación, saludos
@chandercreative
11 күн бұрын
Gracias por tu apoyo SALUDOS.
@gustavopley31989 ай бұрын
muchas gracias por la información con tu invento hare mi proyecto y mejora para mis estudios
@chandercreative
9 ай бұрын
gracia por ver mi contenido SALUDOS
@chandercreative
9 ай бұрын
ESA ES LA IDEA MEJORAR
@SamuelTrevino-zt8cy6 ай бұрын
Exelente video maestro muchas gracias
@chandercreative
6 ай бұрын
Saludos mi amigo
@miguelsaza4106 ай бұрын
Muy bueno y explicativo
@chandercreative
6 ай бұрын
Muchas gracias mi amigo
@ChristianBriones5102 ай бұрын
Genial es un mastodonte enorme pero me gustó creo q tengo todo lo necesario para armarlo solo me falta la soldadora
@chandercreative
2 ай бұрын
💪
@oficinadosergio Жыл бұрын
Sacador de rolamento É muito bom 👍
@jimhoward9644 Жыл бұрын
The Bearing Separator Remover is a common tool. You can buy, rent or borrow this type of tool from many different places. My time is worth something. If this will be used for a job, buy one, they're $49. If you're going to use it once, many auto part stores borrow this out.
@chandercreative
6 ай бұрын
lo uso a diario en mi taller mi amigo en algunos lugares no hay para comprar
@cafro.pawistv3140 Жыл бұрын
You are very talented
@chandercreative
Жыл бұрын
Thanks a lot
@juvenalalvarez9535 Жыл бұрын
Good idea !!!!!!!!!!
@chandercreative
Жыл бұрын
Thanks
@julioagustinolivossalgado8101 Жыл бұрын
Genial
@chandercreative
Жыл бұрын
Gracias
@Goesduit Жыл бұрын
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
@johnpartridge76234 ай бұрын
Good job mate 👍
@chandercreative
4 ай бұрын
Muy agradecido por tu apoyo
@viejojorgge Жыл бұрын
Y cuando es un rulemán chico tipo amoladora o maq. de agujerear.. Que hacemos..??
@chandercreative
Жыл бұрын
Hay otro video en el canal donde fabricamos un extractor para rodamientos pequeños
@marcosfcunha6350 Жыл бұрын
Muito top sua idéia.
@chandercreative
Жыл бұрын
Muito obrigado
@haluktuzunar696 ай бұрын
Excellent..
@chandercreative
6 ай бұрын
Gracias 🙏
@user-hh5ci2wp5u2 ай бұрын
Привіт я зробив з ресори знімач для підшипників і все чудово працює
@chandercreative
2 ай бұрын
Excelente idea mi amigo Saludos
@user-hh5ci2wp5u
2 ай бұрын
👍👍👍🤏🤏@@chandercreative
@kythuatsangtao Жыл бұрын
rất tốt
@angkoljemzkytv Жыл бұрын
Nice... very useful informative video ....like mine😁👍👌
@chandercreative
Жыл бұрын
Thanks
@zainimotorbwi5534 Жыл бұрын
👍👍💯
@francivaldocardoso5900 Жыл бұрын
Ficou show
@jesusgomez2006 Жыл бұрын
Es mucho trabajo hacer este tipo de extractor, si el rodamiento ya no sirve, y tienes un esmeril o cortadora, corta el rodamiento por un lado, de los extremos, sin dañar la barra qué lo sostiene y listo. Saludos cordiales atte Jesús Gómez torreón coahuila México.
@chandercreative
Жыл бұрын
gracias por el comentario mi amigo SALUDOS!!!
@federicogodoy4252
Жыл бұрын
Jesus , a veces hay que cambiar la biela y no el rodamiento .
@anuragkourav479 Жыл бұрын
ये जो आप जो खड़े सरिया लगाये है बो किस बाहन के है और क्या नाम से मिलते है
@chandercreative
Жыл бұрын
Esos barrotes son rotulas de autos pequeños
@NelsonFlores-gj5zu Жыл бұрын
Genioo
@maheshalat7399 Жыл бұрын
Nice
@chandercreative
Жыл бұрын
thank you
@robinrochan9301 Жыл бұрын
Nice very good work sir
@chandercreative
Жыл бұрын
Thanks a lot
@euclidesdesouza6134 Жыл бұрын
Como coseguiu essas duas fresas superiores laterais?
@chandercreative
Жыл бұрын
son piñones de caja de moto o puedes remplazar por otra pieza solo trabaja como volandas
@euclidesdesouza6134
Жыл бұрын
@@chandercreative muito obrigado amigo, gracias
@elcolombiano95832 ай бұрын
Que man para hacer ruido😂
@chandercreative
2 ай бұрын
mil disculpas por el audio pero comentarte de que la herramienta trabaja muy bien SALUDOS
@user-rx5vq9rr2r10 ай бұрын
y cuando el rodamiento o balero esta perdido?
@chandercreative
9 ай бұрын
igual extrae mi estimado SALUDOS
@syamaksashehe65138 ай бұрын
عالیه
@chandercreative
8 ай бұрын
Thanks 🤩
@francofava8818 Жыл бұрын
Muito bom resultado
@khelfiabdellah426 Жыл бұрын
سيد احمد بوال
@chandercreative
5 ай бұрын
gracias por comentar
@kevindubrow74415 ай бұрын
Más fácil y rápido es con un martillo y un cincel
@chandercreative
5 ай бұрын
Puede ser si ya no sirve el rodamiento Pero eso no le gusta al cliente Saludos
@juansaid3100 Жыл бұрын
It's already invented...
@johnvanberrgem286 Жыл бұрын
Just buy one. Their not that expensive
@truongvuong71954 ай бұрын
Rờm rà ngắn gon thui! Làm ra đc sp nè thi ra tiệm cho mau🤣😂🤣
@maximohuenulef
3 ай бұрын
Compre un extractor de fabrica en una tienda, no fue especialmente económicos y se rompió a los 6 usos.
@chandercreative
3 ай бұрын
@maximohuenulef pasa mi eso mi estimado hasta las marcas recomendadas viene con fallas
@DiegoDiaz-fn4tj17 күн бұрын
T doy un 3
@timgannon2993 Жыл бұрын
This one time I went to the park and there was a squirrel in the tree and the squirrel looked at me and I looked at him and it looked at me then threw an acorn at me and I could have sworn that the squirrel laughed at me and ran up the tree.
@hakimhamroun5495 Жыл бұрын
Trop de bruit
@chandercreative
5 ай бұрын
gracias
@chuychong9075 ай бұрын
ESTE VIDEO ES PARA SORDO MUDOS
@chandercreative
5 ай бұрын
También para ellos Saludos
@DiegoDiaz-fn4tj17 күн бұрын
Es muy antiguo no a descubierto petróleo. Es una kaka 😂
@chandercreative
17 күн бұрын
SALUDOS
@darwinogues5562 Жыл бұрын
most bearings do not portrude, useless!
@chandercreative
Жыл бұрын
Gracias mi estimado
@laebdangrs42744 күн бұрын
The sentences in this work are that you made the sounds of nature speak and not, as some industries do, introducing ugly and stupid music into everything.... We want to hear the sounds of nature speaking, not ugly and stupid music.
Пікірлер: 81
No he visto el video pero ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴🚴👍 Está genial el extractor de rodamientos gracias por compartir tus conocimientos 🛠️📐🔧👍
@chandercreative
Ай бұрын
Gracias por apoyar Saludos.
genial justo tengo uno acá y se me había ocurrido lo mismo, lo busque para cerciorarme que nadie lo haya hecho, y encontré este magnifico video, genio me diste varias ideas, muchas gracias.
@chandercreative
11 ай бұрын
Gracias mi amigo
A mi si me gusta esta fabricación, saludos
@chandercreative
11 күн бұрын
Gracias por tu apoyo SALUDOS.
muchas gracias por la información con tu invento hare mi proyecto y mejora para mis estudios
@chandercreative
9 ай бұрын
gracia por ver mi contenido SALUDOS
@chandercreative
9 ай бұрын
ESA ES LA IDEA MEJORAR
Exelente video maestro muchas gracias
@chandercreative
6 ай бұрын
Saludos mi amigo
Muy bueno y explicativo
@chandercreative
6 ай бұрын
Muchas gracias mi amigo
Genial es un mastodonte enorme pero me gustó creo q tengo todo lo necesario para armarlo solo me falta la soldadora
@chandercreative
2 ай бұрын
💪
Sacador de rolamento É muito bom 👍
The Bearing Separator Remover is a common tool. You can buy, rent or borrow this type of tool from many different places. My time is worth something. If this will be used for a job, buy one, they're $49. If you're going to use it once, many auto part stores borrow this out.
@chandercreative
6 ай бұрын
lo uso a diario en mi taller mi amigo en algunos lugares no hay para comprar
You are very talented
@chandercreative
Жыл бұрын
Thanks a lot
Good idea !!!!!!!!!!
@chandercreative
Жыл бұрын
Thanks
Genial
@chandercreative
Жыл бұрын
Gracias
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
Good job mate 👍
@chandercreative
4 ай бұрын
Muy agradecido por tu apoyo
Y cuando es un rulemán chico tipo amoladora o maq. de agujerear.. Que hacemos..??
@chandercreative
Жыл бұрын
Hay otro video en el canal donde fabricamos un extractor para rodamientos pequeños
Muito top sua idéia.
@chandercreative
Жыл бұрын
Muito obrigado
Excellent..
@chandercreative
6 ай бұрын
Gracias 🙏
Привіт я зробив з ресори знімач для підшипників і все чудово працює
@chandercreative
2 ай бұрын
Excelente idea mi amigo Saludos
@user-hh5ci2wp5u
2 ай бұрын
👍👍👍🤏🤏@@chandercreative
rất tốt
Nice... very useful informative video ....like mine😁👍👌
@chandercreative
Жыл бұрын
Thanks
👍👍💯
Ficou show
Es mucho trabajo hacer este tipo de extractor, si el rodamiento ya no sirve, y tienes un esmeril o cortadora, corta el rodamiento por un lado, de los extremos, sin dañar la barra qué lo sostiene y listo. Saludos cordiales atte Jesús Gómez torreón coahuila México.
@chandercreative
Жыл бұрын
gracias por el comentario mi amigo SALUDOS!!!
@federicogodoy4252
Жыл бұрын
Jesus , a veces hay que cambiar la biela y no el rodamiento .
ये जो आप जो खड़े सरिया लगाये है बो किस बाहन के है और क्या नाम से मिलते है
@chandercreative
Жыл бұрын
Esos barrotes son rotulas de autos pequeños
Genioo
Nice
@chandercreative
Жыл бұрын
thank you
Nice very good work sir
@chandercreative
Жыл бұрын
Thanks a lot
Como coseguiu essas duas fresas superiores laterais?
@chandercreative
Жыл бұрын
son piñones de caja de moto o puedes remplazar por otra pieza solo trabaja como volandas
@euclidesdesouza6134
Жыл бұрын
@@chandercreative muito obrigado amigo, gracias
Que man para hacer ruido😂
@chandercreative
2 ай бұрын
mil disculpas por el audio pero comentarte de que la herramienta trabaja muy bien SALUDOS
y cuando el rodamiento o balero esta perdido?
@chandercreative
9 ай бұрын
igual extrae mi estimado SALUDOS
عالیه
@chandercreative
8 ай бұрын
Thanks 🤩
Muito bom resultado
سيد احمد بوال
@chandercreative
5 ай бұрын
gracias por comentar
Más fácil y rápido es con un martillo y un cincel
@chandercreative
5 ай бұрын
Puede ser si ya no sirve el rodamiento Pero eso no le gusta al cliente Saludos
It's already invented...
Just buy one. Their not that expensive
Rờm rà ngắn gon thui! Làm ra đc sp nè thi ra tiệm cho mau🤣😂🤣
@maximohuenulef
3 ай бұрын
Compre un extractor de fabrica en una tienda, no fue especialmente económicos y se rompió a los 6 usos.
@chandercreative
3 ай бұрын
@maximohuenulef pasa mi eso mi estimado hasta las marcas recomendadas viene con fallas
T doy un 3
This one time I went to the park and there was a squirrel in the tree and the squirrel looked at me and I looked at him and it looked at me then threw an acorn at me and I could have sworn that the squirrel laughed at me and ran up the tree.
Trop de bruit
@chandercreative
5 ай бұрын
gracias
ESTE VIDEO ES PARA SORDO MUDOS
@chandercreative
5 ай бұрын
También para ellos Saludos
Es muy antiguo no a descubierto petróleo. Es una kaka 😂
@chandercreative
17 күн бұрын
SALUDOS
most bearings do not portrude, useless!
@chandercreative
Жыл бұрын
Gracias mi estimado
The sentences in this work are that you made the sounds of nature speak and not, as some industries do, introducing ugly and stupid music into everything.... We want to hear the sounds of nature speaking, not ugly and stupid music.