Great news for the community. You never cease to amaze. Man, first the horizon drift and now that 😮😊 I believe that just as iNav provides an excellent solution for fixed wing and drones without too many challenges, so will iNav VTOL. Amazing job 👏
@qyitonefpv655111 ай бұрын
This is looking promising. Thank you for all your hard work
@markmclain589 ай бұрын
Thanks so much for pushing the envelope in this area. I've been building a tilt-rotor for a while now, trying to make it work though logic, programming and adjustments. This firmware upgrade is exactly what I've been hoping for. I hope it will be adaptable to my tail-sitter project too...
@EssentialRC10 ай бұрын
Awesome work. Looking forward to trying a beta if and when it comes out.
@ApappieK11 ай бұрын
Impressive work 👍 Never thought I would like VTOL, but seeing this now ... I see a new INAV VTOL winter project 😄
@pokerchannel6991
9 ай бұрын
dude. it is a lot of work. But, is it really worth it? inav is really hard. ardu pilot is also really hard.
@MrDrivesafe11 ай бұрын
Excellent work!
@SebastienChedalBornu11 ай бұрын
Can't wait for it in the next version of inav. Congrats for your hard work
@ndcapper10 ай бұрын
Great work!
@mikec443011 ай бұрын
great job!
@RobertTheFriscoSchmid11 ай бұрын
SO EXCITED!!! Once you release any beta for this, I will get me another T-1 ranger and make it into a VTOL. Been waiting for this in iNav because I dislike Ardupilot so much and don't even have a PC to configure. So BIG THANKS and please release, happy to live with bugs and support the development
@rcforall484211 ай бұрын
Good job....
@MessingWithCode11 ай бұрын
Beautiful
@narnasqueneth11 ай бұрын
I am so excited by this. Thank you for much for your work! Will your implementation also work for planes that have a rudder control surface servo?
@shotahayashi2969
10 ай бұрын
It should work for planes with rudder
@celeselements10 ай бұрын
Cool!
@DugDiamond111 ай бұрын
brilliant
@dongleefpv11 ай бұрын
❤❤❤🎉🎉
@rrenegadoo8 ай бұрын
Nice.... do you have a video how to set it up on the computer? Thx.
@adilsongoliveira11 ай бұрын
I've been fighting to make a Jumper Xiake 800 work with arduplane for months now. The controller was a POS so I replaced it with a F405VTOL but I kind of gave up. I believe I'll wait for this and if you need someone to help testing, let me know.
@BBFPV11 ай бұрын
I put a 4" inch Kwad in a Dolphin with printed ducts. Servos and "main" Motor manual controlled, but i didn't worked well. Even in acro it pitch up above a certain speed and crashed, the amount of power to hover is also extreme high.
@staymad7206
11 ай бұрын
why are you copy pasting the same comment on all these videos? We get it, but stop the spam. You need to research more
@BBFPV
11 ай бұрын
@@staymad7206 Only 2
@shotahayashi2969
11 ай бұрын
It is likely The 4 inch prop can not provide enough authority for atomrc dolphins weight, and the placement of prop is also important. Is the cog is inside of 4 quand motor`s rectangle? I recommend to start from a proven to work hardware configuration first
@ddano00711 ай бұрын
Thanks for this job. Is this possible to make it work on INAV 6.1.1 with standard Configurator or it requires user compilation of INAV? ( I have VTOL modified Airloader with Matek F405-WMN FC).
Пікірлер: 28
Man, you are a hero!
@BBFPV
11 ай бұрын
❤
Great news for the community. You never cease to amaze. Man, first the horizon drift and now that 😮😊 I believe that just as iNav provides an excellent solution for fixed wing and drones without too many challenges, so will iNav VTOL. Amazing job 👏
This is looking promising. Thank you for all your hard work
Thanks so much for pushing the envelope in this area. I've been building a tilt-rotor for a while now, trying to make it work though logic, programming and adjustments. This firmware upgrade is exactly what I've been hoping for. I hope it will be adaptable to my tail-sitter project too...
Awesome work. Looking forward to trying a beta if and when it comes out.
Impressive work 👍 Never thought I would like VTOL, but seeing this now ... I see a new INAV VTOL winter project 😄
@pokerchannel6991
9 ай бұрын
dude. it is a lot of work. But, is it really worth it? inav is really hard. ardu pilot is also really hard.
Excellent work!
Can't wait for it in the next version of inav. Congrats for your hard work
Great work!
great job!
SO EXCITED!!! Once you release any beta for this, I will get me another T-1 ranger and make it into a VTOL. Been waiting for this in iNav because I dislike Ardupilot so much and don't even have a PC to configure. So BIG THANKS and please release, happy to live with bugs and support the development
Good job....
Beautiful
I am so excited by this. Thank you for much for your work! Will your implementation also work for planes that have a rudder control surface servo?
@shotahayashi2969
10 ай бұрын
It should work for planes with rudder
Cool!
brilliant
❤❤❤🎉🎉
Nice.... do you have a video how to set it up on the computer? Thx.
I've been fighting to make a Jumper Xiake 800 work with arduplane for months now. The controller was a POS so I replaced it with a F405VTOL but I kind of gave up. I believe I'll wait for this and if you need someone to help testing, let me know.
I put a 4" inch Kwad in a Dolphin with printed ducts. Servos and "main" Motor manual controlled, but i didn't worked well. Even in acro it pitch up above a certain speed and crashed, the amount of power to hover is also extreme high.
@staymad7206
11 ай бұрын
why are you copy pasting the same comment on all these videos? We get it, but stop the spam. You need to research more
@BBFPV
11 ай бұрын
@@staymad7206 Only 2
@shotahayashi2969
11 ай бұрын
It is likely The 4 inch prop can not provide enough authority for atomrc dolphins weight, and the placement of prop is also important. Is the cog is inside of 4 quand motor`s rectangle? I recommend to start from a proven to work hardware configuration first
Thanks for this job. Is this possible to make it work on INAV 6.1.1 with standard Configurator or it requires user compilation of INAV? ( I have VTOL modified Airloader with Matek F405-WMN FC).
u need to go digital