I like to stay with stock cars. And I mean "stock". You can get more people and families into the hobby. As well as teaching how to tune-up the cars. Thanks for your help with this video. Keep up the good work. Thomas

Brings back great memory👍🏾

Nice instructional, I'm a new guy in the hobby and soaking up all the info. Nice pace and narration . Thanks

@TheSlotSpot

2 жыл бұрын

Thanks. Definitely glad to help some people out.

@burlpage5260

2 жыл бұрын

@@TheSlotSpot j

Looked pretty fast out of the box for me!

Great video! Lots of good information ! Love your layout,Thanks

AWESOME Video!!!! Keep up the awesome job!!! Be looking forward to more in the future!!!!!

Cool! I'm glad i still have all of my cars from the 70's theough 90's!

Your info was the clearest and easiest to follow. Thank you for your interest in helping. Stay well.

Time consuming but simple modification for not just the Autoworld cars but the older Johnny Lightning cars as well. Get K&B .063 brass tubing and very gently ream out the rear axle stays til the tube fits snugly. Cut the tubing flush with the chassis, a couple of drops of epoxy and you're good to go. Use a Aurora or aftermarket axle and Crown gear and the difference is like night and day, particularly with the older cars. Another place you can do this is with the pinion gear, use a Aurora Armature gear that is too sloppy to use on an Armature anymore with a cut off piece of Aurora axle. But don't try to do it on the chassis side, there's not enough meat to make it work.

Along with your routine, if you tighten up that arm just enough so there’s no flopping about… it smooths right out. Of course you need the right tool to do the work correctly, it’s totally worth having. Brushes and arm will stay in good shape.

I love your layout..

Great track. Excellent video. Next time don't sand anything with the chassis under your work, it will capture all the debris. The rear end of the Autoworld cars have grease on them as well, that should be cleaned off before oiling.

Thanks It definitely Helps ...Had racing set as a Kid .. probably Aurora... then in the 90's the wife bought me a Tyco Lambhorgini Championship 60 ft of track set ... I never assembled the whole set so in 2014 set up very little of the track ... now ten years later I retired a year ago .. so now I assembled to entire set up .I,m 66 yrs now LOL .. Found Pro Tinker Toys online Bryan and Ryan Father son .. so I ordered a couple AW thunder jets that what attracted me to your channel .... also have an AFX Chevelle coming I have heard auto World is. so. so ... I appreciate you insight on a little bit of improvement for these cars thanks Much

Nice 👍 little tweeks to The car and it's improved Nice car

@TheSlotSpot

2 жыл бұрын

For sure just a little time is all it takes

what a fantastic lay out.i wish i had something like that but i do not have the room at this time.

hey great info keep it up i like when its about simple

Beautiful layout brother! ✌🏼

Thank you for sharing and your time.

Great track. Well done

@TheSlotSpot

2 жыл бұрын

🙏 thanks

Everyone one of these I've bought is toe heavy. I've also noticed difference in speed. I have one that is waaay faster than the others and it's hard to keep on the track lol. These cars are fun though! I think the criticism comes from their ability to stay on the track. Not everyone wants to be a "driver". These cars are beautiful. My cars also don't stick to the track near as well as yours out on the package for some reason.

Very informative...enjoyed the vid..😊

All good tips.

good info, thanks!

Thanks! I actually take the magnet out for some old school driving.

@TheSlotSpot

2 жыл бұрын

I have done that to a few. Also have one with no magnet and a mean green arm and it flies !!

That's a sweet layout.

Nice I like it keep up with the good work

@TheSlotSpot

2 жыл бұрын

Thanks 🙏

Thanks for the video.

Thank you…. Good Job 🙏🏼😎👑💯👊🏼

@TheSlotSpot

Жыл бұрын

Thanks a lot!!

The YT algorithm might be working better. Just learned of your channel since this video showed up in my news feed. Love my slot cars (and I like your track layout), though I’ll still buy a new set or cars here and there I no longer have the space for these tracks like I used to.

@TheSlotSpot

Жыл бұрын

Awesome. Welcome to the channel thanks for the support!! Typically in the summer I don’t upload much.I have a lot of other hobbies going on but fall and Winter the new videos should start to pickup.

That circular ring you were trying to get rid of happens when the car powers up. Centrifugal force makes the gear want to fly off. Without the chassie strap it would. You cant stop that friction thats why theres usually a drop of oil on the top gear or in your case a light grease. Love the T-jet/ AFX CARS, I have about 140 cars and trucks and a NOS cases of T-Jet chassies from long Island. I have so much crap im just up in the air as far as selling it, i have no where to set it all up anymore.

Remarkable outcome. Car looked quicker straight off the bat. Excellent work Sir😎👍🏻

awesome.God bless.

@TheSlotSpot

7 ай бұрын

Thanks 🙏

The thing with any slot car set is that the controllers are usually junk. The thing with the newer mega g+ cars is that they need higher whatts to run and a higher OHM controller than most 1:64 scale cars. The mega g+ cars are usually a bit faster than other brands of the same scale. Unfortunately, if you have a set that is set up for the mega g+ cars, you can only run those cars. If you want to run other cars that are not mega g+, you will need a variable current adapter and a different OHM controller. The AFX set is considered a starter set to keep the price down, and additional parts are sold separately. The turn border walls may look better in the Auto World set, but they do not stay that well in place when a car hits it. The AFX fence is a bit better as it works. The tracks themselves may look a little different, but only cosmetic as the tracks for both sets are molded from the same molds in China, and the Auto World track just has some exterior paint. Also both tracks will connect together. Auto World, in general, is better than AFX. The Auto World set, since it is packaged better and comes with the supports does cost a bit more than the AFX set. As a side by side comparison, the video was neat, but it is like comparing apples to oranges, as both sets are similar as they are both nascar style tracks in the 1:64 scale but both kits are different enough that yes the Auto World set is more complete but the AFX set is sold as a starter set as the supports, track clips, etc... are sold separately to keep the cost down.

@TheSlotSpot

4 ай бұрын

Not sure where this comment is coming from as this video is about an Autoworld slot car and has nothing to do with mega g+ cars or afx/auto world track. The track in this video is a mix of new style afx race masters and Autoworld track. You do have your facts backwards though. Autoworld sets are significantly cheaper then the afx race masters sets. This track was powered buy a afx wall pack with 120ohm controllers and we ran everything from tjets to mega g plus cars.

I use brake clean you get in a spray can at the auto section of stores. Spray it into jar and you have the same thing as denatured alcohol. Same result, easier to get. I think your lap time improvement is due alot to the better tires. Wish you would have compared times with same tires.

@TheSlotSpot

Жыл бұрын

The tires are definitely the biggest factor to the lap time but the other stuff provides a much smoother and enjoyable car. I guarantee not changing tires there would be no improvement other then maybe a little quieter car. As far as the brake clean I’m not sure how you think it’s easier to get. You can get denatured alcohol at almost any store in America from even dollar stores sell it. I don’t see the purpose of transferring from an aerosol can to a jar. I also live a half block away from a cvs so most of my supplies come from there. Whatever works for you though my man.

what would cause my autoworld ultra g chassis throw sparks like fourth of july and then start smoking like its on fire? it will not run now. i have been out of slot cars for 40+years and have no clue. any help would be greatly appreciated. thank you for the informative video

Can you elaborate on the iPad lap times setup. I’ll m new to slot cars about to build a permanent layout and would love to figure out how to set up a lap timer/counter. Thanks

@TheSlotSpot

2 жыл бұрын

It’s a mobile app that’s really easy to setup and works pretty well. The hardest part of finding a way to hold your device. It’s also very sensitive to shadows so you need a well lit room for it to work accurately.

Do you have any links on where to purchase better tires for the Autoworld Thunderjets?

@TheSlotSpot

2 жыл бұрын

www.franktheracer.com/about.html and Hotiresdirect.com are both good. I Also order on eBay and get them from local shows.

@toddshort5997

2 жыл бұрын

Thanks for all your video help....bless you and your family

Where do you get your silicone tires from. Thank you. Great video!

@TheSlotSpot

5 ай бұрын

I stock up anytime I see them at slot car shows. I go to different hobby shops and buy them. eBay sometimes. JAG hobbies, Viper scale racing, Frank the racer are all good sources on the web. I also just started making my own tires when I have time.

@nobodyshome758

5 ай бұрын

@@TheSlotSpot Thank you very much!!

What timer app do you use for your tablet?

@TheSlotSpot

5 ай бұрын

That’s an app called Lap Tracker.

Wow, that's pretty fast! Im wonering, is that the stock armature? If not, how much faster with a mean green in there?🤔

@TheSlotSpot

Жыл бұрын

Yes this is the stock arm. I’m not sure about the mean green I don’t have to much experience with them. I do have an older Tjet with one but it’s not much faster if at all faster then this.

@im5150247

Жыл бұрын

Hey, cool thanx for the quick reply! Cause I got my first T-jet coming in the mail, swapped out the original with the Mean Green on an Auto World funny car, it's WAY faster!

Hey, race fans! I have a very simple layout, and my AutoWorld cars WILL NOT STAY ON THE TRACK. :( i can't even pull the throttle half way. any ideas as to what Im doing wrong, or how to resolve this? I can't even take a full lap, and it's absolutely not enjoyable at all. Thanks.

@TheSlotSpot

8 ай бұрын

Any idea what ohm controller your using ? What volts you running at?

@NorthwoodsRaceway

8 ай бұрын

@@TheSlotSpot I truly do not. I need a few tools, I'm learning quickly. I need a voltage tester for the track, and a tester for the cars. Can you lead me in the right direction to purchase these items?

The only improvement is the silicone tires every thing else is just Routine maintenance if you have soldering skills try a shunt between the pickups and the body plates amazing results

I gave upon autoworld..

Auto world.... only in America.?

@TheSlotSpot

Жыл бұрын

Not entirely sure what you mean.

@Biggles-x73

Жыл бұрын

@@TheSlotSpot I've never heard of them are they available world wide or only sold in America.? Ty

Improve a Autoworld Ultrajet? Replace chassis with a 0S3 TFX. Just kiddin''! 😁

@TheSlotSpot

2 жыл бұрын

HAHA I do love my TFX Chassis. I'm up to 5 of them now. I did just recently do an entire autoworld blueprint and rebuild took the magnet out and its pretty competitive with the TFX but still not there and took a lot of time and tinkering. Love the TFX is just oil and go!!

Denatured alcohol will not wash off grease. Grease is a hydrocarbon. White spirit or lighter fluid would be more appropriate. I don't own any HO cars. Why don't you true up tyres like 1/32 and 1/24 scale ?

GOOD JOB ...THANKS

I HAVE ALOT OF GOOD AW IN MY COLLECTION....YOU CAN ALWAYS THROW A VARIETY OF HOT CHASSIS ON THE BODIES ALSO IF YOU NEED.