Oops! This was supposed to be for Sunday morning. Enjoy the video a few days early.

@brendanmulhall

Жыл бұрын

I gladly did so John, thanks!

@sirkai007

Жыл бұрын

I was all excited to see an extra video.

@mountainwolf1

Жыл бұрын

Thanks John and godbless always appreciate your time and wisdom.

@rodmullen64

Жыл бұрын

This is a mistake I can get behind. Also great drone shot of the complex.

@_Dovi_

Жыл бұрын

@@rodmullen64 Agreed! The solar panel stood out, was that a new addition to help drive the equipment?

Did my first forge weld the other day! It worked first try even without flux! I knew exactly what I needed to do because I watched your videos! Thanks John!

@BlackBearForge

Жыл бұрын

Fantastic!

@clydebalcom3679

Жыл бұрын

Congratulations.

@Duckrabbit_Forging

Жыл бұрын

@@clydebalcom3679 thank you!

@Fricker112

11 ай бұрын

Hey good job man. I busted my first weld, so getting it first try is something to be proud of.

I'd say it's still a railroad spike axe because it has a railroad spike in its construction and it distinctly shows it, and on top of that it's actually good.

I have made several RR spike axe/tomahawk with tool steel forged into the cutting edge. I have never sold one but give them away as gifts. They make a great small axe for camping. Split kindling and use the head as a hammer for stakes and whatever. Most have ended up displayed on a wall or table in a home. Yup, a lot of time is spent but worth it when the recipient (family member or close friend) really likes the gift and appreciates the skill and work involved. A big smile and a thank you hug sometimes is priceless. TT

@danp3796

Жыл бұрын

Nothing beats a wide smile when you gift something you made to a close friend or family.

To my untrained eye I couldn't see where you welded the cutting edge to the spike. Amazing work. Thank you for your videos sir.

Very cool axe. Technologically. Especially the part where forge welding and induction heater.

This is a perfect example of how a youtube video should be presented! Nothing but education and entertainment! No repetition; always informative but fun to watch ( and learn )!! Thank You!! I have subscribed and given a thumbs up!!

@BlackBearForge

Жыл бұрын

Glad you enjoyed it!

@pinball16

Жыл бұрын

no vpn or skillshare advertisements either!

@one4320

7 күн бұрын

No shredding guitars. Yahoo!

Love videos that show the whole shop in action. I like the educational videos too but I prefer these. Thanks John!

@BlackBearForge

Жыл бұрын

Thanks

While I didn't use a rr spike, I have made a couple of small hatchetts by forge welding better steel bits in to other steel, purely for the practice (and as gifts to family). I agree, it's a lot more work than just making an axe from decent steel to start with and as you say, not profitable, but I did find the process a good exercise all the same.

@jacksonwheel1464

7 ай бұрын

or if ur a kid and ur neighbors tossing out a bunch of drill bits and you do not know where to find good steel but you live next to a old rail road

i really like the shape it ended in.

I love your videos. I'm from Scotland and I am a carpenter. I have dabbled in blacksmithing from time to time and always wanted to learn. Unfortunately my health took a dump and am now housebound but I love watching your videos. I love the way you do your tutorials. Very informative and well presented. Thank you for the time you take to make the videos.

You, good sir, are like a lost art, and a great teacher rolled into one. The steps you show are well above other people. You make blacksmithing look amazing.

Folding and forge welding the spike clearly makes the end product better, and your discussion of the economics of spending that much time on an RR spike project is right on! I still make spike stuff for my wife to sell in her booth at an antique mall, but her customers wouldn't be interested in spending the money to justify a 5160 blade on a spike hawk. I will still forge weld some 1084 to a spike to make a proper knife at some point, but only for the fun of it.

The early video is definitely appreciated.

Best thing I’ve ever heard at the end of a video like this! “Wear your safety glasses” it doesn’t make you cool and tough to not kids

I bet these would make some neat claw hammers.

I like it more because you can put a nail puller on the hammer end and it's better for carving; it also impresses people more.

Forgewelding in the induction forge sounds like a huge gamechanger. Being able to see the precise temperature and not having to deal with slag seems super useful. I would think oxidization would be more of a problem though, with there being no fire to burn up the oxygen.

@BlackBearForge

Жыл бұрын

So far that doesn't seem to be an issue.

Since you have such a large heal, maybe next one try upsetting that to give you even more material for the eye?

Hi my brother in iron this has turned out a great looking little axe it’s given me the will to get out and give one a try as a change from forging knives it would maybe make a good kitchen axe… Thanks for sharing

Thank you for all the time and effort you put into all of your videos for everyone!

@BlackBearForge

Жыл бұрын

Glad you like them!

Thank you John, for these educational videos that my student daughter and I enormously value. Hobbyist blacksmiths, we have a lot to learn. All the best and enjoy your weekend, Wendi & Molly 🌻🌻🌻

Nice kindlin hatchet.

That would make a great lightweight carving axe.

As one of the people who asked that question, I thank you for the video, and look forward to trying this myself.

Did anyone else pucker up for a split second at the 4:50 mark? Thought you were about to barehand that spike. 😆

Whole time I was watching that I was thinking "That's a whole lotta work". I found the rhythmic beating of the hammer most relaxing.

Useful project for the less experienced smith, in developing and refining skills.

Okay I really want a induction forge now.Great video.

@BlackBearForge

5 ай бұрын

I have been very happy with mine. Although it does have its limits and I still use the propane forge most of the time.

It's a beautiful axe. I had never seen a railroad spike axe before. Looks like it would be good for throwing

Good work. We shared this video on our homemade tools forum this week 😎

Just started my blacksmitch journey yesterday! I got a forge in but had to start setting it up but couldn’t wait for that so I started a decent sized wood fire and unfortunately I couldn’t get the steel hot enough even with a makeshift bath van blowing on it it wouldn’t heat the steel up hot enough so I might grab some charcoal today and try that in really ready to make a knife! Lol

I enjoyed this video. I will be making more time in my shop because of you. Thank you & God bless

A nice piece of work, voice reminds of ron swanson from parcs and rec..

Hi John, I see this project is a learning experience. Just having the time at the forge is priceless, I don't sell my wares, they are gifts or donations for fundraising. Most of my forge work helps me repair antique engines as the blacksmith would have 100+ years ago. Thanks for sharing your skills. 👍

I appreciate the technique shown here. Interesting point about valuation. Of this axe vs cost put I to making it. Loved seeing the combination of induction forge and other tools in the shop. Great video. So glad it came early. Army SE Oregon

I have no idea why I never thought of folding it on itself and forge welding it. Thanks. Gonna have to try it at some point

@BlackBearForge

Жыл бұрын

Glad to help

Thanks for another great video. Your tip about really thinning out the corners of the split is well taken. I've made a half dozen small axes/tomahawks with a welded in bit since viewing that video. Getting the corners seamless is a challenge.

I like that. My 1st thought when it was done was that it could make a unique Roofing Hammer, of course you would have to redefine the hammer head so it's flat not rounded over. Thanks for anther great video John. I learn a lot from your videos.

@Bhartrampf

Жыл бұрын

😀 I was.thinking a trap line or trail axe 👍

Great to see a video like this John. Very enjoyable and educational.

Thanks for sharing.

Nice A friend of mine made one of these for me. Really a surprisingly handy little gizmo. A dandy chisel on a stick. Keeps your hand clear. Perfect for cutting stubborn roots. Handy for welding too. I'll have to try this. Thanks.

Im sure the guys that work with rail road spikes, even the retired. Would buy that

Well mate, some beautiful things don't need a purpose. Of course your business logic is spot on, but it is nevertheless a really cool little axe. Nice job, as usual.

Thanks John, I always pick up a tip or trick from watching your videos. I love how honest and genuine you are.

Something like that would make a great Camp axe due to the carbon Edge added I really like it

I sure enjoy your expertise... regardless of what day of the week it is.

always a pleasure to watch you work in your shop, no matter what you make. you always make it interesting.

Thanks again for the lesson, a valuable lesson. One not to waste time . Good job as always.

I’ve been a hobbyist for 30 years +. How do you find the induction heater for small work?

@BlackBearForge

Жыл бұрын

I discuss where mine came from in this video kzread.info/dash/bejne/gpOHttSngMLFdJc.html

This is the cutest little bearded axe I have ever seen and I want one.... I'd like to make a railroad spike war hammer w/ a spike on the back, that would be a better use of a railroad spike. 😁👍

Wait... whaaat?!?! You can forge without a 12' tall vintage Chambersburg power hammer? Who knew! I enjoyed watching your video. The fact that you relied on the "Armstrong" brand hammer makes the craft more accessible to so many people. I do enjoy watching the old machines get restored and put back to work, but it's also important to show the next generation of smiths that you don't absolutely need these giant beasts in your shop. Best regards from Key West, Capt. Blackheart Charlie

that induction forge gives such a different experience

Looks great! But I have to agree with you! Just too much sugar for a dime! Have a great weekend! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

I think it's cool! The things i make are for my enjoyment and if i'm lucky I can sell a few things and pay for my supplies. I Price my things for the market I have. I know I could sell them for more in a different market but i'm not willing to take the time to find it. Thanks again John!

I add files to make decent knives. Most guys like them if they hold a better edge. Thanks John, it’s always a pleasure to learn from you. Induction! Wow!

Love it! Thanks for sharing!

I am impressed

Dtill the two holes… genius. That is the first time I’ve seen that done and would be amazing to see it done on a hammer.

I just realized your nice roof. And I too have learned Forge Weld Process from watching your videos, like Duckrabbit.

John, living a mile down road I hope to some day learn more from you. As always, thank you for sharing your knowledge with the world.❤

Very nice work bud

awesome video, thanks for sharing!

Super clean, great looking final product.

@BlackBearForge

Жыл бұрын

Glad you like it!

I like the idea. I think I'll use the forge welding to make a claw hammer. Could be a cool little tool project and make for a interesting shop hammer.

Another helpful video. Thank you for all the time and efort you put into all of your video.

@BlackBearForge

Жыл бұрын

Glad it was helpful!

I was never big fan on railroad spikes as a material myself. Great video though it was fun to watch

Cool, good job!

i like this axe style because of the hammer side

Excellent video! Thanks!

Thanks for the early inspiration and that did come out really kool I like it I have a couple of kids that camp quite a bit so I might make a couple for them

My experience with spikes over the years has been it depends on what they were made of to begin with. I've had some new spikes that would get extremely hard in an oil quench and some that wouldn't, but that said I've done many spike knives and hawks just the same way you did this one. Love the channel.

Man that looks like the drywall hatchet I started with back in the early 80s . Looks great .

Outstanding idea!

Hey John your first video inspired me to make some of these I’ve just had a problem with the blade I just can’t get the width out of it like how you do I upset it just about as much as you do then take a cross peen and try to draw it out in width but it usually draws out too far

Really good video, like the new style. Thanks.

@BlackBearForge

Жыл бұрын

Glad you liked it!

The only thing that I don’t like about living in Florida is I can’t come over and bother you and work in the shop. I appreciate all the knowledge you always share.

Everyone forge welds 5160 with ease.... Except me 😂😂😂

Ты молодец! Мне нравится! У нас тоже делают...и не хуже..на руках!

It's a fun project and good practice especially when RR spikes are more plentiful than good tool steel. Cheers

Love these videos! thanks for making these for us.

@BlackBearForge

Жыл бұрын

My pleasure!

This is a awesome inexpensive project! Dilrailments are more common for some reason lol

Maybe not practical for you business wise but sure was good for me both entertaining and educational. Thank you for sharing. Have a great day and stay safe.🙂🙂

So forge welding higher carbon steel to lower grade steel can tools or items made from railroad spikes.

Forge on. . God bless

Looks like just a fun project, John. Bill

Thanks John for that great video! Love it 😉💪

First; I love the coke bottle glasses... Sorry for the bad joke...On a more serious note I really appreciate how you bring an honest perspective to the craft and the work that goes into it. Seeing you use the different methods of forging let's a guy realize he just doesn't have to do one thing.

First video I've seen from you. Great video and editing, and I really appreciate your honest opinion at the end. Great job!

@BlackBearForge

Жыл бұрын

Welcome aboard!

nice little axe, how much does it weigh after adding on the 5160 edge?

Great video

Really Enjoyed Your Video Thanks

Good morning

@BlackBearForge

Жыл бұрын

Morning

It came out nice. I am like you. I would do the wrap around with high carbon insert for a throwing tomahawk or something like that or just start with better steel. But I have made a few RR spike knives too. I guess it is a right of passage or something. :) Thanks for the video.

Awesome build. I am going to try folding it so i can make a better eye. Also is so quiet without the other forges running. I didn't realize our profession was so noisy 😂. Guess that's why we wear ear plugs.

I'd kinda like one for campfire knockaround.

Not economical for production but good practice for beginner and intermediate smiths

ALWAYS INTERESTING

Beautiful as usual ❤

*SOLD* - For those asking. This little axe has been listed for sale at $135 (includes shipping in the US) over on the Etsy shop www.etsy.com/shop/BlackBearForge - SOLD