Well, in short, that's one of the best instructional vidoes I've ever watched in my life! I'm literally at the moment installing a one, and was extremely anxious about installing it properly to be perfect, didn't know about the adjustments!!

I was assembling one of the larger TV benches with a combination of drawers and cupboards. This and other videos made by you was a flatpack lifesaver for me. Also very refreshing it's not a timelsapse like so many others. I was having real trouble with the alignment. It would never have occurred to me to tweak the different screws to get everything just so. I watched it a couple of times and paused as I completed each stage of assembly. Thank you, k-nemo, even more impressive you did this with protective work gloves. Kudos!

@k-nemo

5 жыл бұрын

Thanks a lot for a very encouraging comment. I'm glad the films were useful

Thanks - came here after being confused by the Ikea bag cartoons for assembly that I could not figure out - I see now it is for the adjustments to level in different directions - this video is really a frustration resolver, thank you!

total lifesaver if i came here on line when i first started i wouldnt be here still trying to put it together hours and hours later fab video

@k-nemo

5 жыл бұрын

Thank you a lot for a nice comment

Saved my Saturday! And my living room. And for sure my sanity! THANK YOU!!

@k-nemo

4 жыл бұрын

It's great to hear it. Thanks a watching

Sei il numero 1 in 2 minuti mi hai spiegato tutto quello che Ikea non era riuscito a spiegare. Grazie

K-Nemo, awesome video! Concise, real-time, your video demonstrates what simple assembly really looks like. Thank you!

@k-nemo

4 жыл бұрын

Thanks for a nice comment. It's great to hear you liked the film

Thank you k-nemo, you make it easy to understand how to install and adjust the hinges for the doors. Excellent video.

@k-nemo

4 жыл бұрын

Thanks a lot for a lovely comment

Wish I’d thought to look for a video explaining hinge adjustment years ago! Mystery solved - thank you 🙂

@k-nemo

4 жыл бұрын

Glad it helped!

Thanks you so much for this. Mine came without instructions. I’m usually good with stuff like this but this video really helped a great deal. Fantastic

@k-nemo

3 жыл бұрын

You're welcome! Thanks for watching and leaving a lovely comment

Thank you so much, had this besta for years with pennies under the door, 30 seconds later after watching this vid no need for the pennies

@k-nemo

Жыл бұрын

Thanks a lot for watching :)

Thank you so much for that part where you showed how to adjust the doors very thoroughly

@k-nemo

3 жыл бұрын

You're very welcome!

Thank you for showing the fine adjustments. No one else is doing that. Thank you!

@k-nemo

4 жыл бұрын

Thanks a lot for your comment. It's great to hear that you liked the film

Like the magnification and lack of commentary. That made it easier to follow. Good job!

@k-nemo

5 жыл бұрын

Thank you.

Incredibly helpful. Thank you!

Thank you for this video! You're out here making the world a better place ;)

@k-nemo

2 ай бұрын

I hope I helped.

Very detailed video 👌🏽 Thank you x

Really helped to see it done visually. All good . Thank you

@k-nemo

3 жыл бұрын

Glad it helped

This has just saved my life. These hinged are the worst thing I've ever come across

You are a friggin saviour! 🙏🏽 Excellent video

@k-nemo

3 жыл бұрын

Thank you

Thank you so much, this video really helped me out!!

Thank you for your avatar and the very educational video, God bless you and all yours!!!!

One issue I had with a taller frame is that the hollowness of the frame let the sides 'bow' out slightly, even with the shelf support pegs screwed in that stop that happening (as there's some tolerance flex still). So when I installed my doors, I had to use the side to side adjustment to fix the doors from sagging. Worked, but also meant that the doors stick out past the frame on the opposite side from the hinge. Should I have just stacked smaller frames?

Thank you! Super instructions!!!!

@k-nemo

4 жыл бұрын

Thanks a lot for your lovely comment

Hey K nemo great job. Thank you. Job done.

@k-nemo

4 жыл бұрын

Thanks and welcome

Omg! Thank you! We were going to return untill we came across your video!

@k-nemo

2 жыл бұрын

Glad I could help!

I love the music and the thoroughness .... but I needed captions to explain how to raise/lower and level the doors. That’s the tricky and frustrating part. Everything else is self explanatory.

@k-nemo

4 жыл бұрын

Thank you for watching and leaving a nice comment. It is a fair observation, but I though at the time the explanation is clear enough. Have you managed to regulate the doors eventually? I showed how to do it again in another film, if you want to check this one it might help: kzread.info/dash/bejne/qJ2Gsq1xpLuoo5s.html

Thank you very much.. This video helps me so well... 👌🏻🙏

@k-nemo

4 жыл бұрын

It's great to hear it. Thanks for watching and leaving a comment

Thank you. It was helpful

@k-nemo

2 ай бұрын

Thank you!

Merci! C’est super utile!

2:02 this was the moment I needed to know. You don't find it on the ikea Manuel 😩😍

sooooo helpful! thank you!

@k-nemo

3 жыл бұрын

You're so welcome!

This is the best video I found. Thank you so much. I don’t know what I would have don’t without your help!

@k-nemo

4 жыл бұрын

Thanks a lot for watching and leaving a lovely comment, I'm really happy the video was useful.

Thank you so much, surely kept me from going crazy. ;)

@k-nemo

2 жыл бұрын

Glad it helped!

You. Rock. Thank you!

@k-nemo

4 жыл бұрын

thanks

You’re a hero

Fantastic Video

@k-nemo

4 жыл бұрын

Thanks for watching and leaving a lovely comment

Is it possible to complete unscrew the hinges off the besta frame so I can put it on a different one?

Thanks that was useful 👍

@k-nemo

3 жыл бұрын

Glad it helped

Lifesaver!

@k-nemo

4 жыл бұрын

Thanks

Great video! Awesome job on the step by step tutorial. How do I level the shelf to the top of the door? I have a small level difference

@k-nemo

3 жыл бұрын

Maybe the cupboard is not horizontal?

Most of those "Phillips" screws are actually Pozi-Driv screws (PZ-1, PZ-2). Make sure you use a PoziDriv bit on your screwdriver or else you'll strip the screw heads. Five years of experience talking here. I recommend a driver/drill on a low to medium torque setting instead of a hand tool. It'll save you a lot of time. Good decision to wear thin work gloves too. Assembling this stuff is painful enough without the metal edges carving up your skin.

@k-nemo

5 жыл бұрын

Great suggestions. Thanks a lot for watching and a useful comment

Thanks for the help

@k-nemo

Жыл бұрын

Happy to help

Great video!! I want strong shelf pins for heavier objects, what would you recommend?? Also, at the end of the video you showed 2 different shelf pins, where did you get the 1st set from??

@k-nemo

4 жыл бұрын

Thanks for nice comment. All used pins are included in the set Ikea Besta.

Excellent!

@k-nemo

Жыл бұрын

Many thanks!

so helpful!!!! ty!!!

@k-nemo

3 жыл бұрын

Glad it was helpful!

Danke!!

just what i needed - thank you

@k-nemo

3 жыл бұрын

You're welcome

@mizsab365

3 жыл бұрын

@@k-nemo I wonder if you could help me, I have the 180x42x64cm Besta and in the instructions on page 24 they say to join the 3 units together using 2 screws, is this the only thing to join them together?

@k-nemo

3 жыл бұрын

@@mizsab365 It will be enough

@mizsab365

3 жыл бұрын

@@k-nemo Ah ok thank you

very helpful

@k-nemo

Жыл бұрын

Glad you think so!

Hola! Sabes si se puede poner las bisagras sin instalar la parte de abrir a presion? O necesariamente debe llevar esta apertura y no se le pueden colocar tiradores y abrir normal? Gracias! Un video muy ameno y bastante claro!

@k-nemo

3 жыл бұрын

1:36 No tienes que instalar esto.

I find that when I adjust my self to line up correctly that I've had to unscrew the top adjuster and tighten the bottom one so much the the hinge side is now out of line. I just can't get all 4 corners looking level and flush

At 4:27 of the video... What is that part number support peg that's getting screwed in. I need to order those to stop the bowing of my Besta shelving unit.

Muchas gracias, aunque a mí no se me cierra bien la puerta, ni siquiera girando la tuerca del dispositivo como lo haces en el vídeo 😕😕😕

I just finish installing my first 4 Besta but doors looked crooked so hope I can fix that!

@k-nemo

2 жыл бұрын

What a shame!

Lieben dank

@k-nemo

2 жыл бұрын

Geen dank😀

It’s such a shame that besta drawers don't have such 3 axe adjustment system. All my doors are perfectly leveled and then there are drawers which ruin that grid :/

Grazie mille

@k-nemo

2 жыл бұрын

Prego

Why does that shelf bit at the end come in the bag with the hinges?? I don’t even have any shelves. Spent 15 minutes looking at the pictures trying so work out what it was for!!

Nice vid would have liked a bit of led zep though

@k-nemo

3 жыл бұрын

Next time! Thanks for watching

Geniooooossssssss!!!! Los ame!!!! No me cerraba la puerta jajajajajajajaj

@k-nemo

3 жыл бұрын

Thanks for watching

At the end you will mount the iron items for the shelf, but is this necessary ? Or how much weight can this one have? (5:22 minute)

@k-nemo

3 ай бұрын

Shelves adjacent to the door are installed on this. The same shelves adjacent to the back of the frame are installed on other hooks. The shelf is narrower than the frame. www.ikea.com/gb/en/assembly_instructions/besta-shelf-dark-grey__AA-1227320-2-2.pdf

@ArianneBossers

3 ай бұрын

Thank you for your explanation! 🎉 this was not in our instructions! That makes sense!

The last part for the shelf does there go a screw in the shelf or not ? I dont see a screw for it🤷🏻

@k-nemo

Жыл бұрын

It should be included. Ask in the store.

what do these things @4:58 add since the plank is already resting on the smaller mounting pins (?)

@k-nemo

4 ай бұрын

For door shelves that are moved forward. The others reach the back panel and are mounted with smaller mounting pins.

@k-nemo

4 ай бұрын

The shelf is narrower than the frame and there would be a visible gap near the door.

I have an issue with the hinges: the soft closing mechanism for the ones mounted on the left side of the besta don't work. Could you please tell what could be the reason?

@k-nemo

3 жыл бұрын

kzread.info/dash/bejne/nqhqmbyKj7rTgLg.html Try to adjust

@realjoker1568

3 жыл бұрын

@@k-nemo thanks but I was talking about the hinges not the push to open mechanism...

Quedaría bien sujeta una puerta con solo las bisagras de arriba y abajo? La del medio no la puedo poner porque tengo los agujeros ocupados 😅

@k-nemo

3 жыл бұрын

No vi la bisagra en el medio. ???

@oscarjustovito9645

3 жыл бұрын

@@k-nemo perdón, he visto tantos videos que ni me fijé que está solo tenía 2, la mía es una puerta de 1.95m y lleva 3 😅

Would have been great but the end was truncated and obscured before fully showing the whole of the fitting of parts 115442 & 115444. It would have been nice to have had some commentary of captions

Minhas portas n ficam certinhas niveladas, algum segredo ?

@k-nemo

6 ай бұрын

Mostrei no vídeo como ajustar.

Like if you're in the middle of a move. We got this!

1:57 The spring thing refuses to work on the bottom door. The 2 on top work fine but it doesn't keep the bottom door closed and the spring thing just stays pushed in if we try to force the door closed. We've tried turning the cap thing like you did but nothing's working :( I see you're still responding to comments and stuff, hoping you can help!

@k-nemo

5 ай бұрын

Try pressing the springs with your finger, maybe some are defective and need to be replaced.

@YoNicePaprika

5 ай бұрын

@@k-nemo Okay! Was hoping maybe we just did something wrong and it can be solved at home. But looks like we'll have to run back to the store after all 😅

Zoom it out !!

How the hell did you get your screws to screw in at 0:54? My screws just don't want to turn, and I'm clearly doing something wrong because every unit is like this for me.

@k-nemo

2 жыл бұрын

Maybe you have defective hinges?

@ShellSnell

2 жыл бұрын

Nah I'm just an idiot. I was using a wrong screw driver head. A standard phillips didn't cut it I guess. Odd.

Dobra instrukcje ale sama w sobie regulacja ehhh trzeba mieć trochę wprawy kręcąc srubkami...

@k-nemo

3 жыл бұрын

Training!

I do not understand the purpose of the four (2 left, 2 right) metal pieces that are the last things installed and exactly where they should be installed reltive to the shelves. My Bestå system has 12 doors, so it's' important to get this right the first time. BY the way, the video suggestions of other related videos blocks this part of the install. Very useful otherwise. Thanks!

@k-nemo

4 жыл бұрын

Thanks a lot a lot for suggestions and leaving a useful comment. I used for metal pieces for every shelf to make it stable.

👏👉💯

@k-nemo

3 жыл бұрын

Thanks for watching

This is all pretty self-explanatory, except for those mysterious little clips. But the end of the video -- in which it becomes clear what they are for -- is utterly obscured by the links to other videos :/

@k-nemo

4 жыл бұрын

Thanks for watching and leaving a nice, fair comment

2:05 I don’t like that they bounce so much

I think those plastic things are for dampening the bounce of the door

@k-nemo

4 жыл бұрын

They are

@foowishamewican

4 жыл бұрын

@@k-nemo I couldn't even get mine in so at the moment the door is bouncing on the soft closure

@k-nemo

4 жыл бұрын

@@foowishamewican Is it problem 1:53? Try 2:01.

@foowishamewican

4 жыл бұрын

@@k-nemo I'll try that thanks. I think those plastic things should take some of the bounce

@Vladdie777

4 жыл бұрын

@@k-nemo Mine didn't come with the plastic tacks to fill the holes? Did you have them yourself?

I succeeded all the instructions but I can''t make the press&open button work properly.do you have an idea about it? Cause unfortunately this video is useless

@k-nemo

2 ай бұрын

Maybe you have the new version of runners? kzread.info/dash/bejne/rGd6pMuso7bPd9I.html

You saved my marriage

@k-nemo

9 ай бұрын

Great to hear it :)

You need to slow down and explain what you’re doing a lot of people having issues and you’re not pointing out what the issue is my hinges don’t fit into the door like that the way yours have

@k-nemo

3 жыл бұрын

Can you please tell me the time and I will try to help you.

I never understand why people make instructional videos without sound. Would you not say a word when showing someone how to put this together??

No instructions here whatsoever