Nice review！You are the first one on youtube that made a complete review about this new quad.

@AdventureFPV

2 жыл бұрын

FIRST! lol, thanks, man. Honestly, I think I got this quad early by mistake. The website still says pre-order until the 15th. I'm not complaining.

@FlyByWireC

2 жыл бұрын

@@AdventureFPV Lucky man! You are blessed!

Been thinking about getting a Nazgul! Awesome review and thanks for sharing your thoughts!

@AdventureFPV

2 жыл бұрын

Thanks for watching! This is still my favorite quad in my lineup, The Chimera 7 PRO is moving up on the list though.

Thanks for showing us the new Nazgul mate! Keep up the good work and happy flying :)

@AdventureFPV

2 жыл бұрын

No problem man, Thank you for watching

@Impossibly-Possible

2 жыл бұрын

@@AdventureFPV hey can you give me a list of gear to get to fly, I know what drone I want Nazgûl f5 v2 and digital for feed, not Dji. Caddx polar for camera and video feed but I don’t know what goggles remote or gps to use and if I am Missing anything else

@AdventureFPV

2 жыл бұрын

@@Impossibly-Possible I use this remote: amzn.to/363Ndsp and these goggles: amzn.to/38K3VOA these will bind with any DJI Digital system like caddx.

Awesome video, glad I found your channel! Just got this as my first quad, it's coming in in the next few days -- so stoked!

@AdventureFPV

2 жыл бұрын

Thank you, I am glad you found it too. You will love it. Have you put in any Sim time yet?

@t3px149

2 жыл бұрын

@@AdventureFPV lots and lots, bunch of time on a micro as well - i’ve been over-prepping cause it’s all about the footage for me too & I don’t need to break more cameras/quads than necessary😂

@AdventureFPV

2 жыл бұрын

@@t3px149 I think you and I would get along great... I know the feeling

@t3px149

2 жыл бұрын

@@AdventureFPV Well your vids are making me wanna move to Colorado rn so maybe we will get along😆

@AdventureFPV

2 жыл бұрын

@@t3px149 Yeah the scenery is great here for sure.

I got the new Nozgul F6 V2 and the new DJI unit kills it. Thanks for the vid on the 5 bro

@AdventureFPV

Жыл бұрын

I am truly sorry for the delay in response. I had a case of KZread Burnout. Times have changed for me in recent months and I am slowly starting to get back to flying and my channel. Had a family tragedy, an Occupation change, a New car purchase, Daughter starting to drive. Kids' school activities and more. I prioritized family first and getting my mental state in order before I could resume my channel operations. Life is trending in a more positive direction and wanted to follow up where I left off.

Hey man, late to the party but I am starting FPV and your video is really informative as I have not done my first flight yet and stress a bit on the binding on setup part

@AdventureFPV

2 жыл бұрын

Thanks, man, it's not that bad honestly. I put about 30 hours in the sim before I did my first flight. That may be helpful. Thanks for watching and happy flying man.

ABSOLUTELY DOPE I BOXING VIDEO DUDE! LOVE TO KNOW MORE! 😍😍😍😍😍😍😍

@AdventureFPV

2 жыл бұрын

Thanks, man, I made a follow-up video too on my channel.

Great review brother🤘that's a gorgeous quad

@AdventureFPV

2 жыл бұрын

Thank you very much man, keep up the good work on your channel too!

Soo tempted to get it 😅 Nice first look!

@AdventureFPV

2 жыл бұрын

Yeah man, I am really loving it so far. 2 months in and no complaints so far.

Awesome footage - didn’t know that about the dead cat frame - thanks.

@AdventureFPV

2 жыл бұрын

Thank you. Yeah, the first time I mentioned the props in view in a FB group I got lots of push back saying it was not true. That is why I included the footage of the RZR to show everyone what I have experienced. So far so good.

Awesome ! Nice job man !

@AdventureFPV

2 жыл бұрын

Thank you! Cheers!

Awesome video and review!

@AdventureFPV

2 жыл бұрын

Glad you enjoyed it, thanks for watching

@Tripleainside

2 жыл бұрын

@@AdventureFPV 👌 btw I sent a pm msg on your FB channel with a question

@AdventureFPV

2 жыл бұрын

@@Tripleainside Responded...

Ooof...love them leds on there. Should make for some awesome chase flights

@AdventureFPV

2 жыл бұрын

I know I cannot wait to do a chase. I am pretty new to FPV and only just met some other FPV peps recently. We will have to try it soon.

@GregSupe

2 жыл бұрын

@@AdventureFPV yep same here man, I'm about a month in. Still learning the ropes. But can't wait to link up with other enthusiasts and have some fun. It's an awesome hobby. 😁✌🏾

@AdventureFPV

2 жыл бұрын

@@GregSupe Yes it is. everyone I met I found on here.

great review and presentation !

@AdventureFPV

2 жыл бұрын

Thanks man, Hope you have been doing well.

Best one till now ❣

@AdventureFPV

2 жыл бұрын

Thank you so much!

liked your review, you appeal to the average fpv guy like my self, nothing to crazy get it back in one piece.

@AdventureFPV

2 жыл бұрын

Yes sir, I am new to the hobby and want to keep my gear working for as long as I can. Thank you for watching.

Great vídeo friend Good quad 👌👌👌👍🤜🤛

@AdventureFPV

2 жыл бұрын

Thanks 👍 I am liking it so far!

Very informative man!!! Thank you! I’m curious what screw did you use to mount your go pro. I’m not sure if mine came with one or maybe I’m just confusing one of the screw I received with it

@AdventureFPV

Жыл бұрын

I just used a short bolt and nut...I am truly sorry for the delay in response. I had a case of KZread Burnout. Times have changed for me in recent months and I am slowly starting to get back to flying and my channel. Had a family tragedy, an Occupation change, a New car purchase, Daughter starting to drive. Kids' school activities and more. I prioritized family first and getting my mental state in order before I could resume my channel operations. Life is trending in a more positive direction and wanted to follow up where I left off.

Man that thing is sick!! I would buy one, except I just bought my second naz (LED version) a few weeks ago. Digging the deadcat look!!

@AdventureFPV

2 жыл бұрын

yeah, I feel the same way. When I started FPV 4 months ago I was watching youtube and did not understand why so many pilots had like 10 quads on the wall behind them. Now I know. They each have a job. The LED Version looks just as cool though! I just needed a DC!

@FreshPanda97

2 жыл бұрын

Also have bought two nazguls 5HD V2 both this year, but they fly reallx different because iflight has changed motors, FC and the complete tune is different

@AdventureFPV

2 жыл бұрын

@@FreshPanda97 Interesting, I got mine about 2 months ago and I have the 2207 motors with F7 45A flight stack. So that is all I know. I was unaware of another version. Too bad they fly so different for you. Thanks for watching

@jondoe6618

2 жыл бұрын

@@FreshPanda97 Same thing on my 2 naz's. Totally different fc and tunes. I tried to swap one to the other, and poof!! Smoked a motor. So I changed it back.

@FreshPanda97

2 жыл бұрын

@@jondoe6618 my first nazgul is much better tuned

You are cool man ! :) Like your videos very much!! :)

@AdventureFPV

2 жыл бұрын

THank you so very much. That means a lot.

hi quick question, i just got mine and this thing is glued to the ground, meaning i arm it and everything spins fine but it wont take off. in fact it looks like its tryingnto fly into the ground. i reversed the motors in betaflight to see if it fixes it but it did not. any ideas?

Well made video! Some advice would be to keep sticks pinched at all times.

@AdventureFPV

2 жыл бұрын

Yeah can you hear that slap back... LOL, I am still working on it, but yes that is sound advice. Thanks so much

Nice quad might be my next purchase

@AdventureFPV

2 жыл бұрын

So far so good, I am liking it. A bit pricey but prices are going up in 2021 on everything I guess

Question?? I updated the air unit DJI FPV remote and the DJI Google 2. Got the googles connected but can not get the remote to bind. I did all this to use the googles 2. Any idea on the remote to bind. I shouldn’t have to do any thing to the flight control should I? I’ve flown it before with the old googles. This is a IFlight Nazgul evogue F5D. Thanks for any help

@AdventureFPV

Жыл бұрын

Hey, sorry for the delayed response. Hopefully you got it figured out.

Can you do a set up video for the Bob57. I’ve received mine recently, and am waiting for my remote to arrive (radiomaster boxer and crossfire module) I have a Lipo charger and couple batteries. Can you do an explanation video of what I need to do to get in the air. I’m a little confused as it’s my first Kwad. What do I need to do with regards to beta flight etc before I get in the air? A tutorial going from unboxing, to first flight would be so helpful for me. I’m literally clueless as I’ve only flown Avata / dji fpv and normal camera gps drones in the past. Cheers

@AdventureFPV

Жыл бұрын

I already made a video about the BOB57 when it came out: kzread.info/dash/bejne/amqf2ZJ-m8y1gM4.html

wow this seems to be the first review of F5 evoque out in the internet haha thanks for the info. I am trying to get F5X squashed x frame though since this frame is more suitable for freestyle maneuver. Is 16:9 60 fps ok for playing around? I get difficulty in precision landing with 16:9 aspect ratio since it cuts the bottom of the frame. Anyway Thanks for the info!

@freespirit2129

2 жыл бұрын

also that rig protection wall thing i think is blocking the wind for cooling vista unit. No issue for this? I wish iflight gives you F5X X non DC version to review haha

@AdventureFPV

2 жыл бұрын

@@freespirit2129 Yeah I wish they would give me one too LOL. The x frame would be better for acro for sure. But I already have an X and wanted a DSC. The 16:9 does not bother me because of the "Style" of flying and filming I do. But I can imagine you fly with a higher camera angle than I do because you fly acro and that would make it harder to land for sure. I have not had any overheating issues yet, but I have only had it for a few days now. Happy flying mate!

Honestly, really thankful that you did this video. I was a bit shocked to see there was no manual whatsoever with my iFlight Evoque. Couldn't find anything specific on their website, too. Maybe I'm blind but if not I feel that's a big mistake on iFlight's part.

@AdventureFPV

2 жыл бұрын

Well, I am glad it helped you. I think I got some basic paperwork but nothing that would walk you through step by step. Happy flying

@drScorp1on

2 жыл бұрын

@@AdventureFPV I had some warning leaflets but not the simplest quick start guide. Which is really just a few easy steps. But well... More views for you! Haha

@AdventureFPV

2 жыл бұрын

@@drScorp1on LOL, I guess thats right. Thanks for watching, How do you like the Evoque so far?

@drScorp1on

2 жыл бұрын

@@AdventureFPV I haven't been able to fly it yet. Over here the drone and RC have to be equipped with a kind of physical "license plates" like a car, haha. But thanks to your video I managed to at least update everything and confirm the motors can be armed and spin correctly. Hope the plates arrive sooner than later! So far the thing looks like a beast, at least for a noob like me.

@AdventureFPV

2 жыл бұрын

@@drScorp1on Crazy, where are you? We have to register and print a stick to put on it but we do that on our own.

it's a very nice frame🤩🥰

@AdventureFPV

2 жыл бұрын

Yeah, Looks and flies nice so far! Thanks for watching

Awesome video.. I just bought the nazgul f5d.. 6s version and I absolutely love it. My issue is uploading reels to Instagram. Is there a trick to uploading without Instagram compressing the daylights out of the footage.. please help

@AdventureFPV

11 ай бұрын

The only trick I found to get better quality on Instagram is to upload through your phone and make sure high-quality video is checked into settings bearing somewhere in the menu. But I still think you can press is it pretty bad

I need you to ask something, when you was unboxing package, stickers on motors was props out and in betaflight too, but when you put props on your drone, they was props in? Can you explain that? I have trouble with mine bnf that came yesterday, i dont know why i cant take off. So can you explain about props?

@AdventureFPV

2 жыл бұрын

Hey there Mateja thanks for watching. I think your eyes might be playing tricks on you. I watched the part at 7:14 about 5 times and I am looking at my quad right now I can say 100% my quad is props out. This is how my drone was delivered and I have not changed that. Hope this helps.

@matinik_fpv

2 жыл бұрын

@@AdventureFPV hey man so this was my problem omg, my drone is flying now😂 i was thinking that lower side of prop is one that lead, omgg, such a mistake, all my drones flying now, thanks for opening my eyes. Nice videos, keep it going! Greetings from Serbia

Nice video. I’m new to fpv just got the dji fpv system. Can I use my transmitter and goggles on the inflight like you? Also can I use my Mac computer to update and configure like you? Also my transmitter is the newer one.

@AdventureFPV

2 жыл бұрын

Hey there Welcome to the hobby, yes you can use your mac to configure that is what I do as well. As far as the DJI FPV Goggles yes you can use it with the Evoque, but not the DJI FPV Remote v2. You will need the original DJI FPV Remote found here: amzn.to/3JZggN8

@hobie278

2 жыл бұрын

Great thanks for the help. Could I use a transmitter like the tango 2 instead. And can I put a gps on it.

Looks great my guy!! The new Evoque does look pretty slick. I’m not normally one for putting all the LEDs on my quads, but I do think the Evoque looks really cool. I’m afraid that it will probably be really popular due to the cool aesthetic, taking away from it’s originality. I do think those side covers do offer some protection for expensive components, especially if one happens to use “Turtle Mode” on a regular basis. Props out FTW.

@AdventureFPV

2 жыл бұрын

Thanks for commenting, Yes it is flashy, but also preforms well so at this point I will give it a win. We will see how it holds up.

I love dc frame

@AdventureFPV

2 жыл бұрын

yes, I love it as well, thanks for watching

I am a Nazgul owner definitely a fan . My only observation would be around the side plates lit up they look pretty good however do they have an effect on cooling the Vista? Keep us posted. Thanks for sharing 👍

@AdventureFPV

2 жыл бұрын

Thank you for watching and commenting about this. You are not the only one with this concern. I will post an update if I run into issues. So far so good though.

@pottyputter05

Жыл бұрын

It's a year late but no, leds don't produce much waste heat and these are diffused by a fairly large mass relative to the output. They use such a small amount of power it's hardly worth shutting them off if you want max max max punch

Hello in the meantime, congratulations for the video. On the IFlight website it says that it also has GPS but is it true? Why is the RSSI channel disabled?

@AdventureFPV

2 жыл бұрын

Hello, yes you can order this with GPS, I did not! RSSI can be turned on and off in the OSD of Betaflight

@deusmax

2 жыл бұрын

@@AdventureFPV Thanks for the reply! I noticed that in your configuration you have it disabled. Today my Evoque arrived here and it seemed strange to me that there was no RSSI signal .. In all my drones this signal is always present .. I would not want something to have gone wrong

Hello I need a little help, I have ordered the Nazgal Evoque F5D 6S for £235.00 UK and it's on its way to me now. My problem is I have Fatsharks Attitude V5 goggles and the Radio Master TX12 controller, what do I need to do to get it up and running? Had drones before but only Hubsan H501S and small race drone, nothing like this. I really want to get into the hobby with the fatsharks I have and the TX12, do I need a rapid fire module for FATSHARKS? and TX12 controller? Will they bind without buying extra stuff? Thanks ...

@AdventureFPV

2 жыл бұрын

Hey there, welcome to the hobby. Did you get the Analog version? I use Digital so I am not too sure about the Farsharks. What Module do you have on your Radio, and what did you order on the Evoque?

@sibriers5254

2 жыл бұрын

@@AdventureFPV Thank you, Yes I ordered the analog version, I have the Radio Master TX12 radio with the 4inone module but got to buy the crossfire module I think, that's what I'm not sure on. Think it's the most basic package, I can give you a link to the site where I ordered it

Love my nazgul and xl5 lots of similarities

@AdventureFPV

2 жыл бұрын

Yes for sure. I will have to keep flying to see how she hold up!

Thanks for putting out this video. Just getting into FPV. I got the Dji Fpv drone and now looking into getting the same quad as yours. Will the Dji goggle V2 get unbound to the Dji FPV drone when binding it to the Caddx (Nazgul) such that it needs to get rebound? In other words, does the goggle need to get rebound when switching from one drone to the other?

@AdventureFPV

2 жыл бұрын

Hey there, welcome to the hobby. I am not sure about the DJI FPV as I do not own one. But I can tell you I have 10 FPV drones and they do NOT get unbound when connecting a new drone. I just turn on the drones and they work. No rebinding is needed.

@ottosun12

2 жыл бұрын

@@AdventureFPV Thanks!

@agvgrande9174

2 жыл бұрын

@@AdventureFPV so basically you can swarm-fly them all 😎

@AdventureFPV

2 жыл бұрын

@@agvgrande9174 That would be AMAZING... LOL

Could give me a list of what I need to get to fly, I want digital feed to fly and goggles and remote that’s not DJI. I think I need nazgul f5 v2 6s battery and a digital sender receiver for camera and flight I think caddx polar camera but I need a nice goggle and remote and what ever else I Missed. Can you fill me in on gear

@AdventureFPV

2 жыл бұрын

@Human Games I use this remote: amzn.to/363Ndsp and these goggles: amzn.to/38K3VOA these will bind with any DJI Digital system like caddx.

Dji assistant cant see my drone for some reason any help ?

@AdventureFPV

2 жыл бұрын

Do you have the lipo plugged into the flight controller? Also try a different cable I had an issue with this one time. Are you on Mac or pc?

Great review Lee thank you ! 👍 If i may ask a question ? I have just received a Nazgul Evoque 6s as a bundle with dji goggles v2 & a IFLIGHT Commando 8 ELRS 2.4GHz but i would like to bind the Evoque with my dji fpv radio instead is this possible or do i have to remove the ELRS receiver ? cheers bud ! 👊👍😎

@AdventureFPV

2 жыл бұрын

Hey thanks Jarrod, Unfortunately the DJI VPV remote that comes with the DJI FPV Drone does not work with any other drone. But the Old DJI FPV square V1 will work with any air unit or vista with a push of a button. That is what I use on all my quads. amzn.to/3P212ZM

@JFG_01

2 жыл бұрын

@@AdventureFPV cheers bud ! 👍😎

Heya! Thanks for your video! DJI Assistant doesn't recognize the drone... which one should I download?

@AdventureFPV

2 жыл бұрын

No problem, check out this version of the FPV assistant. The new release last month: www.dji.com/downloads/softwares/dji-assistant-2-dji-fpv-series

@MushaMiniatures

2 жыл бұрын

@@AdventureFPV thanks a lot for the prompt reply! It was the cable… the one I use for the rc and velocidrone didn’t work… luckily I found the one provided by iflight xD

@AdventureFPV

2 жыл бұрын

@@MushaMiniatures No problem, thanks for watching, glad you got it working.

@MushaMiniatures

2 жыл бұрын

@@AdventureFPV sub gained anyways even with my fpv account 🤩💪🏻

I'm trying to decide between 4s and 6s. Any reasons you chose the 4s version? I mainly shoot for cine type stuff not hardcore fpv tricks. Thought maybe the 6s would just be more handy with the extra power, but could make it tough to control the way I need it to.

@AdventureFPV

2 жыл бұрын

Honestly I went with 4S because when I started flying 11 months ago that was the batteries and chargers I went with. And I did not want to buy a bunch more gear for 6s. Granted you will get more flight times and Power on 6s but like you said I fly cinematic and don't really care for the extra power. I know you can dial it down to the settings but it's just one more thing you have to fiddle with. If I want longer flight times I've been using lithium ion batteries and get between 8 to 10 minutes on a 4S and I've been very happy with that.

@franciscolezcano7441

Жыл бұрын

@@AdventureFPV I've read the specifications for the evoque 4s and it says that you can use 6s batteries on them, is that true? also the lithium ion sounds good tho, thanks for the heads up! i'll get the 4s version for the same reason as you, i have 10 4s battery packs and i don't want to spend a lot more money on 6s.

Is there a video to show how to set up the analog version?

@AdventureFPV

2 жыл бұрын

Not sure man, I started flying about 6 months ago and went digital. I have not tried analog. Good luck man I am sure there is something.

Where can I buy one? Is the battery separate or it is included in the box

@AdventureFPV

2 жыл бұрын

You can get one with my link in the description. No, you will need to get a battery and the other accessories separately.

I'm thinking of buying this as my first FPV drone. I want to get into FPV flying. Do you know if the props get in the way of the GoPro footage for the x style frame? Or is it just the caddx? Also, for this setup, is it just the DJI goggles, the controller, and drone (no receiver)? Looks like a ton of fun and amazing footage is possible.

@AdventureFPV

2 жыл бұрын

Hey there Seth, thanks for reaching out. If you use a low camera angle, Hyper smooth or reelsteady go, yes you will get props in view on the GoPro from time to time because the gopro will use the ENTIRE sensor to stabilize. You can see it with the RZR footage in this video. If you do decide to buy it consider using my link in this description as I get a small kick back if you do.

@seth.heerschap

2 жыл бұрын

@@AdventureFPV Perfect, so the goggles, drone and controller should be enough (from your gear affiliate links)? Also, what's the difference between mode 1 and mode 2 controllers? Are those the same or different?

@AdventureFPV

2 жыл бұрын

@@seth.heerschap Thanks, Mode 2 puts the throttle on the left. Most pilots in the US fly mode 2

I have the same controller and drone. But it won’t do anything when I turn it on. Any ideas?

@AdventureFPV

2 жыл бұрын

Going to need a LOT more info. Does the remote turn on, Does the Remote Turn on, Have you Bound both to Vista, Have you Configured the Remote in Betaflight, do you gat any arming warnings in your goggles?

@xxlegend45xx72

2 жыл бұрын

@@AdventureFPV Everything turns on and remote is working in betaflight. I mustve turned something off. Nazgul lights up but beeps when i try to arm it.

How does this drone compare to the nazgul5 HD in terms of performance and someone deciding between the two? Is the price difference worth it

@AdventureFPV

2 жыл бұрын

Not sure yet. Honestly, I was in the mark for a DC-style drone and this popped up in my feed so I jumped at it. I have both quads and love them both. I got it because of the DC form factor no other reason. If I was not in the market for a DC I would have just kept the Nazgul V2 HD because it's great!

@MatthewRumble

2 жыл бұрын

@@AdventureFPV awesome thanks, I'm into a lot of cinematic fpv but also want to put the sim hours to good use with some freestyle. I think I may pick this one up

@AdventureFPV

2 жыл бұрын

@@MatthewRumble Yeah man I think you will love it then, Check out this video I did with it yesterday: kzread.info/dash/bejne/h3eMy6alXdjflMY.html

Dope video. Dang, it now I need one! #fpvaddict

@AdventureFPV

2 жыл бұрын

Thanks man!

Do I have to have a battery plugged in to activate? Got the drone and still waiting on the battery.

@AdventureFPV

2 жыл бұрын

You will need a battery to activate the air unit yes... But not the Flight Controller

@fpvwithme

2 жыл бұрын

@@AdventureFPV thanks for your help. Put it in the air yesterday!!!

What’s the biggest difference between the 4s and 6s would it be power and flight time?

@AdventureFPV

2 жыл бұрын

Yes and Yes

About to buy this as a first timer. What radio and goggles do you recommend with this?

@AdventureFPV

Жыл бұрын

I use the DJI goggles v1 and v2... I also just use the DJI Remote as it binds to all my air units and vistas. But any ELRS remote wold be great as well. This is the remote I use: amzn.to/3TRda1d

@TypeR632

Жыл бұрын

@@AdventureFPV just followed and messaged you on Instagram. Lol

Where can I get one of the DC Nazgul Evoques?

@AdventureFPV

2 жыл бұрын

You can use my affiliate link if you like: rb.gy/cqaudb

HI, I'm planning to get the HD version probably the DC version, because I'd like to make some smooth cinematic lines and turns. I've got a gopro9 that I've mounted on a DJI FPV for some testing. Post I'm using RSGO to get smooth footage, but I found that my footage were kind of blurry. Settings for the gopro were those seen on some YT video about the topic. 4K/50 4/3 Large No Stab, Iso 100/100, Shutter 1/100, WB 5500K, Bitrate high, sharpness low + ND32 filter ... Flight time is about 4'30" to 5' ... quite the same as you .. Would you be kind to post the settings you've used for your gopro9 on top off this quad... Thanks for the good review .. :)

@AdventureFPV

2 жыл бұрын

Hey Jean, thanks for reaching out. It sounds like you are doing everything right. I do use the same settings except I shoot in 30FPV and 1/60SS with ND 32. Can you send me an example of the blurry footage so I can analyze it? You can email me if you prefer. my address is in my about section and also on my site. Here is some footage with the Hero 9 & RSGO I got last week. No problems with blur. kzread.info/dash/bejne/c6hr1tGtkbCfnNY.html

@jean-christophepaulau9040

2 жыл бұрын

@@AdventureFPV Thanks for your answer .. Hi, here"'s my first try with the mentionned settings : kzread.info/dash/bejne/o2d1082goJWZe5s.html

@AdventureFPV

2 жыл бұрын

@@jean-christophepaulau9040 It looks like it is 1080p not 4k. I have noticed youtube killing my 1080p footage, I never get a clean upload unless I do 4k MP4, also what ND filter are you using?

Just got this quad for my first. I will say the quad is awesome, but iflight cheaped out on the included stuff. I only got 1 antenna. My props did not come on the spindle holder like yours did, and the worst of all, my quad was not shipped in the cutout foam like yours and every other reviewer I have seen receieved. Mine was shipped in an injection molded plastic holder. Also several of the 3d printed parts that are green on the one you demonstrated to use here, are black on mine.

@AdventureFPV

2 жыл бұрын

That is strange, seems like they changed things up during production. I know they have been shipping a lot of these bad boys.

@keen_nocap

2 жыл бұрын

@@AdventureFPV Hey Adventure, you ever experience a flight controller freezing mid-flash then bricking itself so it’s an unrecognized usb device and doesn’t show up in beta flight? It says the device has an error in device manager under USB’s, and has a solid green and solid red light on constant now.

@AdventureFPV

2 жыл бұрын

@@keen_nocap WOW no I have not, Still pretty new to the hobby. This seems like a Joshua Bardwell Question. LOL

@keen_nocap

2 жыл бұрын

@@AdventureFPV I emailed him a few days ago and he still hasn't replied....

@AdventureFPV

2 жыл бұрын

@@keen_nocap Busy man, If I had experienced this issue myself I would tell you how I fixed it. But luckily so far I have not had this issue. I wish you good luck. when you find a solution you should make a video about it to help others. Have you tried any FPV groups?

هل يأتي معها جهاز تحكم ؟

what drivers do you have installed on betaflight for the Evoque?

@AdventureFPV

2 жыл бұрын

What do you mean by Drivers? Like windows Drivers? I use OSX and it is plug and play if thats what you are asking.

@keen_nocap

2 жыл бұрын

@@AdventureFPV Mine would not connect to Betaflight plug and play, but I think it's because I don't have mine bound to a Tx yet. Ordered mine with Crossfire, but don't yet have the Crossfire Module in my TX16s. Not entirely sure though. I saw in the Betaflight app, they had drivers to download on their frontpage, and I was wondering if I needed those installed for plug and play (ie CP210x, STM32 Virtual COM Port Driver)

@AdventureFPV

2 жыл бұрын

@@keen_nocap Your TX should not matter, You should be able to talk with the FC right away. Mine just says dev/USBmodem in the dropdown when I plug it in.

@keen_nocap

2 жыл бұрын

@@AdventureFPV I have no idea why, but today I was able to connect with no issues. I think the usb-c cable they provided me with is faulty, because that's the only thing I changed. Thank you for your help! Really enjoy your content!

@AdventureFPV

2 жыл бұрын

@@keen_nocap Thanks man, happy flying, glad it is working out for you now.

Do j in have to have the exact same controller and goggles or can I use my own that I already have??

@AdventureFPV

2 жыл бұрын

I guess it would depend on what you already have. ELRS, CrossFire, Analog?

@axlfn8031

2 жыл бұрын

@@AdventureFPV I have a lite radio 2se

@AdventureFPV

2 жыл бұрын

@@axlfn8031 Yeah that could work if you have frsky or elrs

@axlfn8031

2 жыл бұрын

@@AdventureFPV okay thank you so much I’m really trying to save money because my tiny hawk2 freestyle got a solid red light and can’t fix it for some reason

@AdventureFPV

2 жыл бұрын

@@axlfn8031 I can understand that. The FC on those things are notorious for going bad.

I wish mine will take off like yours 😭😭😭have same drone but mine has wierd take off full power 20cm above ground and disarmed propss are seems OK and set up in betaflight dunno

@AdventureFPV

Жыл бұрын

Oh no! Did you get this figured out yet?

@Cinoo90

Жыл бұрын

@@AdventureFPV yaaa simple thing -. - one of the prop wasnt tighted enough🤯 btw already couple flights ive done it and I love it😍

I pulled the trigger on a nazgul and the whole set up of left handed antennas and mine came with right handed antennas LOL rip

@AdventureFPV

2 жыл бұрын

Yeah I think left is standard. strange it came with Right

@npa4863

2 жыл бұрын

@@AdventureFPV maybe its standard for digital? idk, I got the analog version.

@AdventureFPV

2 жыл бұрын

@@npa4863 Ahhh maybe thats it

U didn’t bind the reciver to the transmitter

@AdventureFPV

9 ай бұрын

Watch 6:15 again...

Nice setup but don't dig the covers on the electronics...I would never cover up the Vista. Especially in a crash/retrieve situation. The vista gets soooo hot while you are digging through a tree or bushes trying to get to this thing.

@AdventureFPV

2 жыл бұрын

Yeah that was my thought too. That's why I said at the end of the video it might be Overkill but it looked cool. Only time will tell my friend. Happy flying

@freespirit2129

2 жыл бұрын

agree

SHOW

@AdventureFPV

2 жыл бұрын

:)

Put a PREARM ASAP

@AdventureFPV

2 жыл бұрын

New to FPV, I have heard of a pre arm but have never used it before. Tell me more and why I need it. Thanks

@theprisoner6666

2 жыл бұрын

@@AdventureFPV it’s basically another step that’s needed to arm the quad. It stops you accidentally arming it while holding it. I know you have throttle lock, but sometimes you can also accidentally lower the throttle, especially after a landing when the throttle will be down anyway. It’s usually done on a temporary switch that resets itself, but the DJI controller doesn’t have this. I was thinking of assigning it to the beeper switch to remind me to turn it off again after arming. So you would basically turn on the beeper, then arm, then turn off the beeper again. You can assign the switches in Modes tab in Betaflight. If it comes with a GPS you should set up GPS rescue and assign the rescue to a switch too. Good luck.

@AdventureFPV

2 жыл бұрын

@@theprisoner6666 Hey thank you so much for taking the time to answer that question. I will think about how I would do it with my current switch configuration

If you get imto fast acro flying and hard acro manuvers you will not be happy with performance of dead cat frames.But if the great footage is your only goal you are fine!

@AdventureFPV

2 жыл бұрын

Good to know man, I am going to keep the V2, So if my acro skills improve I have a backup! Thanks for the info!

Quick tip … Rather than buying a new qwad just stick a ten dollar ND filter on your GoPro and double the shutter speed of that of your frame rate So 30fps -1/60 shutter Your props will disappear like magic Any frame any camera angle! 👍

@AdventureFPV

2 жыл бұрын

So why were my props in view at 1:03? 4:3 30fps with 1/60 shutter speed and ND 32? Was I using the wrong kind of magic?

@theprisoner6666

2 жыл бұрын

@@AdventureFPV 😂👍 I could see them too, but they were blurred, so they didn’t look too bad. But the deadcat is defo a better option for cinematic stuff.

you dont need a gopro

@AdventureFPV

2 жыл бұрын

I do maybe you don't but I do. I'm into fpv for high quality video. Speaking of videos I like the one you have with Tom McDonald

@pooljunki1

2 жыл бұрын

@@AdventureFPV thanks bud

i don't understand what's wrong with you... you're flying 5 inch with 0 camera angle))) if you are normal 15' on fpv and 20-25 on hd camera and there'll be absolutely no props in hd footage)) and after nazgul true x frame you'd better try apex frame(don't waste your money for the label, you could buy apex frame from readytosky). I had both nazgul v4 and v5, what I liked about this that they changed geometry of the framy but it flies exactly the same: just normal. But apex gives you some magic feeling. It's muuuch more responsive especialy on roll. It gives you exact that feeling when you could fly straight slowly like a cinewhoop but when you need some hard moves it gives it to you and it's great pleasure. I'll never return back to true x frames.

@AdventureFPV

2 жыл бұрын

Sorry to offend you, I didn't know my choices in gear were such a big deal to you. You can spend your money on what you like and I will do the same. FYI There is no "RULE" on the camera angle. You can fly at whatever angle you like. If you actually watched the video you would see that I do not film in "HD" I film in 4K 4:3, do you know what that is? You would have to set a 30 deg angle to completely get rid of the props when filming with 4:3. I also use Reelsteady and it uses the entire 4:3 space to stabilize meaning the props get put into frame from time to time. You can see an example of this with the RZR Footage in my review. Not sure why people get so bent out of shape about other people's gear. I guess it's the same reason half the world is running around with masks on and the other half is not. No need to push your "Quad Beliefs" on others. Happy Flying???

@user-lu2cy9xv2z

2 жыл бұрын

@@AdventureFPV I didn't want to make you angry, sorry... It was just an advice)

@AdventureFPV

2 жыл бұрын

@@user-lu2cy9xv2z Not angry, Sometimes it's hard to feel someone's emotions via text. Your comment started off with "What is wrong with you"? I really do appreciate your advice. I am new to FPV. I have only been flying for about 4 months. So I do want to try the apex as well. Just have my money invested in other things right now. No hard feeling man, we all have different experiences and uses cases for our gear. Thanks for the advice, when I get some more time and money I will look into the Apex.

@user-lu2cy9xv2z

2 жыл бұрын

@@AdventureFPV the frame price is less than 40$, just take all the electronics and motors from this frame and place it apex)

@AdventureFPV

2 жыл бұрын

@@user-lu2cy9xv2z Really. Okay, that's good to know. You are talking about the original Nazgul V2, right? Thanks again man, If I break something on mine I will switch frames. See... we are friends! LOL

That music drove me away.. terrible.

@AdventureFPV

2 жыл бұрын

Sorry, the music was not to your taste. But it cannot be as bad as the robot voice over you have mispronouncing words on your "amazing" channel intro video. Keep up the good work, you might hit 8 subs soon.

@Thedrifter1

2 жыл бұрын

@@AdventureFPV The thing about being on YT is being able to take criticism and fix your mistakes. You are aware you can lower the music track down so we can all hear what you're saying. And i know, 8 subs and only a YT intro. I thought the voice over though done alright, not a robot bro, it is someone's voice but put together by an algorithm. But thanks for the free advertisement ; }

@AdventureFPV

2 жыл бұрын

@@Thedrifter1 I really hate to feed the trolls but here we go... I can take criticism for sure, and I did, that is why I said sorry you did not like it. Then I offered my own criticism of your work because I wanted to see if the person offering advice to me had anything of value I could learn from on their own channel... See how that works? The music track was lowered to -18DB with a low freq cutoff applied, next time I will be more aggressive with lowering the volume, thanks for the advice. And just so you know a voice put together by an algorithm would be the very definition of a robot voice. No problem with the free advertising, I think once people land your YT channel or click the link to your "Website" they will be really impressed and subscribe right away or use the 20% off first order link for the unknown products and services you offer. Some more criticism on your website: you may want to run spell-check on it right away and remove the "Created with 123 website builder" if you are claiming to do Webdesign and SEO. It might be a more persuasive marketing tactic for your "Customers" Good luck on your ventures!