How to install stop valve on pvc pipes as shown in the video will make the process of replacement or repair later easy and flexible! How do you see the idea of ​​installing the valve on this pvc pipes ? Please leave your thoughts in this comment section! Thanks for watching !

@ramavanij7600

Жыл бұрын

Qààaà s CE CRee see see CR 2 we saw to

@augustinen.aantony5309

Жыл бұрын

P

@dailytricks6161

Жыл бұрын

Welcome and Thank so much!

@wagito5096

Жыл бұрын

Kebanyakan sambungan coiii.....

@wilmerdooc2678

Жыл бұрын

hahaha ..huh costly

Correct idea but costly. Single Union can be sufficient

@dailytricks6161

Жыл бұрын

Thank you for letting me know what you think about this! really great , I totally agree with what you said ! However, if it is installed like that, although it costs more to install, it will be effective in the future for the process of repairing and replacing the valve when it is broken? What do you think of this comment? Thanks for your enthusiasm!

@hectorgarcia8691

Жыл бұрын

You just saved me 300 dollars that I was being charged by a plumber, thank you 😊

@dailytricks6161

Жыл бұрын

@@hectorgarcia8691 Oh ! great for this! very happy that the video has brought you usefulness in real life! Wishing you and your family all the best and happiness! Please keep the good interaction! Thanks for your nice feedback!

@vijaysrinivas4969

Жыл бұрын

With a PVC shut valve..could save two couplers.

@briliankamil4594

10 ай бұрын

You know, there are pvc union valve thing, it combine those valve and union in a single thing..

That is the way I assembled my 160' deep well pipe, sans valve, but with couplers between each 20' section of pipe. Continuous poly is usually used but pulling the pump was a lot easier with the couplers when you don't have a crane and winch. Your technique (with one coupler as noted below) is a useful approach to replacing or adding a valve.

@dailytricks6161

Жыл бұрын

thanks for watching ! you are so kind to leave me a comment about this! Hope the video will be useful to you and everyone! See you in other videos of the channel!

Here in the US, if I was concerned about easy valve replacement, I would just use a Sharkbite valve. Otherwise, if replacement was necessary, I would just cut out a section of pipe and use cemented PVC couplers to connect a short stub on either side.

@dailytricks6161

Жыл бұрын

Thanks , sir!

@stevem1081

4 ай бұрын

Well, sharkbite doesn't fit pvc, it fits cpvc, copper and pex.

@H2OMANLV

11 күн бұрын

​@@stevem1081thank you Steve for correcting this wanna be plumber. Saved me the trouble of dropping the hammer on him....

nice. The advantage of this method is when it comes to change the ball valve..it makes it easier 👍

@dailytricks6161

Жыл бұрын

Thank you for watching and leaving a comment! I'm glad it was useful to you and everyone! Wishing you and your family peace and happiness!

@sfdavis3722

4 ай бұрын

Change a brass ball valve? 50 years from now. Plus not pvc, it poly

@chartpo

27 күн бұрын

ball valves DO GO BAD. Got one on my irrigation system now. This would make it easier to fix. Thanks

I am a plumber and still watch this video ❤

@freddywoodcreations

3 ай бұрын

Yess

I've been brainstorming how to install a 1 inch ball valve into a gravity fed pvc line from my spring fed water tank where it enters the house upstream from my water filter. No flex in the pipe so your suggestion is perfect! Plus, the valve is serviceable in the future without cutting remaining pvc again and again. Thanks!

@dailytricks6161

Жыл бұрын

Thank you for watching the video and leave me a comment! Glad you shared the same opinion! Wishing you and your family all the best and happiness! Looking forward to seeing your opinion in other videos on the channel! Thanks and good luck!

@mrpriceisright

Жыл бұрын

Use a single pvc push to fit (shark bite type or twist to lock) coupling on one side, glue the other threaded fitting direct. (only need one union or push fitting).

I'm Electronic and Electri Service Engineer . But ❓ I Like The Plumbing Work. Some Time I Fittings Water Pumps Plumber Works. Today I Got New Ideas. Once Again Thank You For Sharing..

I have had on my mind to install a shut off valve in the 3/4" PVC water line coming into my house for sometime now. This video is exactly what I needed to see to get my valve installed. Will get the parts today. Thank you very much for this video.

@dailytricks6161

Жыл бұрын

Thanks for your feedback! I am very happy for this , it is great that the video has been valuable to you , hope you enjoy the other video content in the channel ! Looking forward to hearing from you in other video content! Thanks for watching .

@ralphgeyer8572

Жыл бұрын

Don't do it this way use pvc valve and a slip coupling

Very informative video. I learned a lot from this one, and the plumber never said a word. His work did the talking. My hat's off to you sir.

@dailytricks6161

10 ай бұрын

Thanks you ! have nice day!

Nice idea, you can easily change the valve once broken.

@dailytricks6161

Жыл бұрын

Thank you for this great feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel! Thank you for your kindness and awesomeness!

Thank you for showing this and very idea 💡 you r the best

@dailytricks6161

Жыл бұрын

Thanks you !

Appreciate💕 both you and your Shares Thank you

@dailytricks6161

Жыл бұрын

Thank you for these good things , may God bless you always with peace and happiness ! Looking forward to your feedback for other videos on h channel! Always welcome to my channel! good luck.

Plumbing just got a whole lot fancier with this valve installation! 💧🎩

1. Only PVC valve (both end female socket type) will be just sufficient to replace. 2. At last you installed the valve diametrically opposite to that you saw in starting of video for correct direction of its lever. 3. Anyway, it is a nice video. 🎉

@dailytricks6161

Жыл бұрын

Thanks for your comments , this is great for me ! Thank you and thank you for your compliments! Wishing you and your family peace and happiness!

Very convenient for disassembly

@dailytricks6161

Жыл бұрын

Thank you, I'm so happy for this! Hope to receive your feedback in other videos on the channel! have fun.

Same problem happened in my house...I searched for changing the gate valve....thankyou very much

You only need one disconnect coupling, this is because once the coupling is un-threaded, the valve can simple turn to spin off the male connection on the other side.

@dailytricks6161

Жыл бұрын

Thank you ! I will think about these! Thank you for watching and thanks for the feedback! wish you happy

@geoffreyvonmarkirada8823

2 ай бұрын

what do you mean it would spin?.. both union when facing each other goes in clockwise and the other side is counterclockwise.. to make it spin with water pressure you need that two union facing in both clockwise or counterclockwise direction.

@VijayanPv-uc2rk

2 ай бұрын

Avoid maximum joints, then only required one union!

@meegssan5716

Ай бұрын

Only one 🤔 isnt it better with two? Also arent those unions?

Buen video.Gracias por compartir.👍🙋🇪🇦

@dailytricks6161

2 ай бұрын

Thanks

Thanks! Makes it easy, practicable & safe as well as caters for future maintenance if need 👍

@dailytricks6161

Жыл бұрын

Thank you for these words of encouragement! Wishing you and your family peace and good luck!

@bhimroopnarine3591

Жыл бұрын

@@dailytricks6161 Most welcome & deserved 👍

@dailytricks6161

Жыл бұрын

@@bhimroopnarine3591 thanks!

What a good idea to apply for...Thanks.

@dailytricks6161

Жыл бұрын

Wellcome ! Thank you for watching and leave me a comment! Hope the video will be useful to you and everyone! Looking forward to seeing you in other video content on the channel!

Simple and useful tips

@dailytricks6161

Жыл бұрын

Thank you !I'm glad it was useful to you and everyone! Hope my other video content will make you satisfied! I look forward to seeing you in my other videos!

Thanks for your Idea WE can need that one day

@dailytricks6161

Жыл бұрын

Thank you ! I'm really happy for this! Hope to see your feedback for other video content on the channel! have fun.

Hoy aprendí contigo 😮

You deserve a hug right now

@dailytricks6161

Жыл бұрын

great for this! Thanks for your appreciation! Wishing you happiness and fun always!

thanks for the sharing. it's very necessary for me

@dailytricks6161

Жыл бұрын

Thank you ! I'm so glad to see you here! I'm glad to make you happy! Hope to see you in other video content on my channel! Thanks and have a good time!

great idea. I'm planing to install a temporary water line source and want to redesign it after finishing some renovation and this idea really help although its costly but its really efficient rather than cutting and buying new pipe and fittings and this video really fits for low pressure water lines

That's doing it the hard way. Also unless the pvc is schedule 80, the pipe is for electrical work and not code approved for plumbing. Maybe things have changed since I retired after 45 years as a plumbing contractor.

@dailytricks6161

Жыл бұрын

Thanks sir! Each region will have different standards and practices! Sincere thanks for your feedback! Good health to you sir!

Muito bom.....RJ,vou fazer

Breathtaking 💖💖

@dailytricks6161

Жыл бұрын

welcome

Excellent method onday a client asked the same question. How to connect ball valve?

Молодец,👍

@dailytricks6161

Жыл бұрын

welcome and thank so much !

Muito interessante a técnica. 😊

Hay lắm ak.nhớ ra nhiều video nữa nhé

@dailytricks6161

Жыл бұрын

Thank you for watching and leave me a comment! Wish you success soon and always happy !

Mantap...sangat bermanfaat.....

@dailytricks6161

Жыл бұрын

thanks you!

OMG😍,Awww💞 I love this

@dailytricks6161

Жыл бұрын

thank you ! thanks for liking

Thank you very much

good tips. very creative

@dailytricks6161

Жыл бұрын

Thanks ! Wishing you and your family happiness and success! Hope to see you in other videos on my channel! wish you happy! thanks for watching !

thank you for sharing😮

@dailytricks6161

Жыл бұрын

Thanks you and good luck! let's keep interacting together!

THANK YOU VERY GOOD AND FUN VIDEO!

@dailytricks6161

10 ай бұрын

THANKS MY FRIEND!

@creative_king_foryou

10 ай бұрын

@@dailytricks6161 I Subscribed To Your Channel And Shared Your Videos. Thank You For Responding To My Comment. I'm Very Happy For That. Thank You !

why have 2 unions when you only need 1? better yet: 1) use a sharkbite shut off (the 2 unions will more than pay for it). or with the shutoff (threaded) shown 2) use a single sharkbite straight connect. 3) sharkbite Quick Connect Push to Connect/John Guest Speedfit Union fitting (these are made out of pex). If its its outdoor or irrigation, use an orbit PVC-Lock fitting (push on). All of these will be cheaper and easier than 2 unions and all will allow shut off to be removed if it fails.

@dailytricks6161

Жыл бұрын

Thanks for your information! I appreciate these very much!

@jpcaretta8847

Жыл бұрын

Exactly. An idiot who should learn instead of making videos spewing nonsense.

very creative and it worked for me

@dailytricks6161

Жыл бұрын

Thank you ! I am very happy to receive your noble deposit ! Wish you always happy and successful! Welcome to my channel, thank you for watching!

Excellent 👌

Very good cogragulation.

2 things u forgot . when u cut the pipe u have to deburr it. And second thing u have to clean it with a PVC Cleaner before u get the glue on. These are two very important things.

@dailytricks6161

Жыл бұрын

Thanks you , sir!

@SRV136

4 ай бұрын

I just used the blue glue and haven't a problem in 5yrs

@martink.dronemovies2234

4 ай бұрын

@@SRV136 Yeah maybe thats Luck, but i work with this Things almost every Day and these These Tipps are important

Very good ❤

I will try with these tips

@dailytricks6161

Жыл бұрын

Thanks and good luck! I'm glad you're satisfied!

Just magnificent 🌹🌹

@dailytricks6161

Жыл бұрын

thanks !

Super buenas ideas

@dailytricks6161

8 ай бұрын

Thank so much

❤ it's just amazing you are sharing your plumbing skills to assist people who never ever done any plumbing work which is really appreciated, sorry 4 some of the negative feedback in the comments section,have a great day

@dailytricks6161

Жыл бұрын

Thank ! In the process of creating content, I look forward to receiving your and everyone's evaluation, whether positive or negative, it is precious to me! Thank you for those comments! I look forward to receiving your feedback on other video content on the channel so that I can improve what is not on my channel! Thanks and good luck!

@jpcaretta8847

Жыл бұрын

This is stupid in fact. See others for simpler.

Now u have 2 find where they sell it and name of it. Also 2 much thread tape can easily cross thread it when screwing on.

@jasonthompson5600

Жыл бұрын

To much tape can cause it to split would only cross thread if you make it do so

@rtp4919

Жыл бұрын

Absolutely agree.

@GaryYoung-eq1ph

Жыл бұрын

It gets tight to fast by hand, and it seems 2 be cross threaded . A diy could cross thread it. And if u have a rubber gasket in you don't have to tape it, maybe one revolution.

Ide cemerlang, salam kreatif

@dailytricks6161

8 ай бұрын

Thanks you so much, Have a good time !

Thank you

great connection

@dailytricks6161

Жыл бұрын

thanks !

spectacular ocean until you're officially captivate me...great

@dailytricks6161

Жыл бұрын

Wellcome ! Nice to see you here! Thanks and have a good time , hope to receive your comments for other content on the channel !

Mantaf tq for infornation👍👍

@dailytricks6161

Жыл бұрын

thanks you!

😍great🔥🔥 It's engaging!❤️

@dailytricks6161

Жыл бұрын

welcome and thanks !

Wonderful shot

@dailytricks6161

Жыл бұрын

welcome and thank so much !

ممتاز جدا جدا شكرا لك يا بطل

@dailytricks6161

Жыл бұрын

Wellcome ! Wishing you peace and happiness!

@user-rv2mq1qr2q

Жыл бұрын

@@dailytricks6161 وكذلك مرحبا مليون وبعملك الجميل جدا جدا

Using conduit for water pipe looks like problem number one.

@dailytricks6161

Жыл бұрын

THANKS

Enjoyed the finger pointing.

@dailytricks6161

Жыл бұрын

Hi

People talking about adding two leak weak spots, big deal, if happens, just install new o rings.. Nice video Sir.

@dailytricks6161

Жыл бұрын

thank you , you are so kind to leave me these words of encouragement ! Have a nice day and full of energy!

The purpose of using union in this TUT in next changing of stop valve you won't cut a piece of pipe. Nice idea.

@dailytricks6161

4 ай бұрын

thanks you!

Good information sir

@dailytricks6161

11 ай бұрын

thank you somuch ! have nice day!

Outstanding

Good lesson tanks

@dailytricks6161

Жыл бұрын

thanks!

Wonderful💮

@dailytricks6161

Жыл бұрын

Thank so much ! Have Nice day.

great job

@dailytricks6161

Жыл бұрын

Welcome and thank so much!

good job bro, keep it up

@dailytricks6161

Жыл бұрын

thank so much, my friend !

i love you your idea

@dailytricks6161

Жыл бұрын

Welcome to my channel! It's a pleasure to receive your comments! Hope to see you in other videos! Thanks and have a good time!

Wooow... very very amazing

@dailytricks6161

6 ай бұрын

Thanks you! Have Nice day

Nice idea bro.

@dailytricks6161

Жыл бұрын

Thanks

Good tricks for life

@dailytricks6161

Жыл бұрын

Thank you very much ! you are so kind to leave me a comment , hope you enjoy the content on other videos in my channel ! Thank you , wish you and your family always happy and successful !

This guy seems to know what he's doing, so well done. Very educating video. Generally the problem with plumbers is that if you ask 10 of them how to solve plumbing problem X, they'll come back with 11 different solutions and then they'll start arguing with each other that everyone else is an imbecile and a fraud.

@dailytricks6161

6 ай бұрын

Thank you for your feedback! and I'm glad if you found this helpful, but if you feel dissatisfied then I'm sorry for these too! Sincere greetings from Vietnam

Don't forget to chamfer the pipe ends, that way the PVC cement doesn't get pushed out and you get a proper chemical weld. Using primer would be best too. Not saying that what you did won't last for years, but for just a little more effort, you could have much stronger joints. This matters even more for elbows. TLDR; follow the instructions on the can of PVC cement exactly for the strongest, longest lasting joints.

@dailytricks6161

Жыл бұрын

Thank you for watching and for your comments! so precious , i will look into these ! Thank you and wish you and your family peace and happiness always!

Beautiful Videos 🍧

@dailytricks6161

Жыл бұрын

Thank you! Cheers!

Excellent

@dailytricks6161

29 күн бұрын

Thanks

Good job sir

@dailytricks6161

Жыл бұрын

thanks you!

Good for you

Cool!

@dailytricks6161

Жыл бұрын

welcome and thank so much !

Very good nice videos like ❤❤👍

@dailytricks6161

Жыл бұрын

thanks you!

Excelente. Míster. Pero con una tuerca unión es suficiente.

Все сделано классно но есть один вопрос какой клей использовали

great video bro

@dailytricks6161

Жыл бұрын

Welcome and thanks!

Beauty❗

@dailytricks6161

Жыл бұрын

thanks you! have nice day !

Overkill...no thanks..

In New Zealand the valve can be clamped onto the pipe with an adaptor and a clamping tool. No glue required and the clamping requires only 3 seconds. The clamp connection is stronger than the plastic pipe.

@SarfrazAhmad-zm5wz

5 ай бұрын

Hi John how are you Tell me more about your fitting style and types of pipe fittings like elbow, Union,Tee, socket,and other tool install with short video and pic's please you don't mind.

They sell the pvc valve with the unions already on them, much cheaper and less chance of leaks since no threads with teflon tape are used. and they are much shorter than what you put together. If for some reason you can't find the unions and need to fix a problem right away, a valve and 4 90's will work. glue the 90's on the valve and see how much you need to cut from the pipe with the other 2 90's on the pipe. Yes it will not be straight inline as before, so it might not work in some cases, but for most, it will.

The usual problem here is when the teflon you put on both ends of the valve turned out to be insufficient. You turn on the water, and the teflon starts leaking. But you glued both ends already, so you have to repeat the process all over again and buy another set of fittings.

@dailytricks6161

Жыл бұрын

Thank you ! I will reconsider this issue ! have fun.

@W123

11 ай бұрын

Smart notice 👍🏻 thanks.

@jairoricocastaneda8758

5 ай бұрын

Con una universal es suficiente.... Att.Menudito.

Super

Good 👍

@dailytricks6161

Жыл бұрын

thanks you! have good time 😆

Nice

@dailytricks6161

Жыл бұрын

Thank you for this positive feedback! Wishing you and your family peace and happiness! Hope to see you in other videos on the channel!

hey I wanted to ask if we can use " metal repair paste" on blue pvc pipe water??

@dailytricks6161

11 ай бұрын

I think it's not possible, because each will have different composition and mechanical properties and that would probably be what makes it unsuitable!

@moctarusman6431

11 ай бұрын

@@dailytricks6161 thank you

@dailytricks6161

11 ай бұрын

@@moctarusman6431 Thank you! hope that's right! Wishing you joy and happiness !

I would leave at least a couple of inches between the union and the fitting attached to the valve, for more flexibility in case future work is needed. Just one union would be enough for this job.

@dailytricks6161

Жыл бұрын

Thank you for these comments! I will think about this! Thank you for your kindness and have a nice day!

Great

@dailytricks6161

Жыл бұрын

Thanks you ! Have Nice day

cool lovely looking

@dailytricks6161

Жыл бұрын

Thanks for liking, love you !

Such small pipe is flexible. IF you have enough length, you don't need a treaded coupler

Sweet :) , it is Such a pretty video

@dailytricks6161

Жыл бұрын

welcome and thank so much !

Ini yg bilang.. Kalau ada yg sulit napa mih yg mudah?? 😂😂😂😂

@dailytricks6161

Жыл бұрын

thank you

Why spend for unions? Simply cut the pvc and reconnect with a coupling for later repair when needed. Less expense and less complicated.

@dailytricks6161

Жыл бұрын

Thanks for these thoughts from you! I will review these, it's really valuable and useful to me! Thank you and best wishes, sir!