appreciate that you actually took the time to explain all the cables and their uses! very informative, thank you!

This is hands down the best video on installing this head unit that I have seen. I just purchased one and it will be installing it this weekend I feel super confident now

Dude your an absolute wizard and this has been monumental in helping me plan out my audio setup in my 20’ STI. Thank you so much for making all of these audio related videos.

What a great video, thank you for the information and details you put in this video. So many KZread video's out there showing how to install these Android units but never explain in this simplified way. Thank you!

Thanks for making this video. One of the best, if not the best in describing the different wiring harnesses. I'm installing an Idoing unit in a 2013 Camry this weekend and frankly, I'm disappointed in the lack of instructions and bad videos out there. Good job!

You make the best videos! Extremely detailed and direct. Everything you need to know to do a full install. Hope to see you soon. Saw what happened on IG. Blessings.

The video is hands down the most thorough and well thought out one I have watched. Thank you for taking the time to produce this video !!!

Thank you for the video!! You majorly helped with my installation. You have the best iDoing installation video by far!!

Absolutely superb video, since this unit doesn't come with instructions they should pay you for this detailed video it absolutely helped me with my rear camera mix up like you described. Thank you and keep making great videos

Good install. And your side notes are helpful. I always say, 'Don't force it... if you are having to force it, something is wrong'.

Hey man, just wanted to thank you for this super thorough install. Literally plug-and-play with your detailed video. The only issue I had is with the backup camera not working initially, but it was a matter of just pushing the OEM connector all the way in. Anyways, dope vid!

@huhinteresting

Жыл бұрын

Did mines today and followed his vid too! I also happend to have an issue with the reverse cam and I still havent figured it out. Which one is it?

@MiguelSevilla

Жыл бұрын

@@huhinteresting It's been a while so I don't recall, but for me the issue was that one of the connectors was not all the way in and it wasn't obvious until I rechecked all my connections. Follow the tutorial in the video and make sure all the connectors are all the way in.

Thank you, thank you, thank you!!! You did a great job of explaining the extra cables and which ones I wanted to use. I pulled the old unit out and was perplexed with the extra cables, so I put it back together. Now I’m confident I can complete the install.

Great Video man! I like that you went through and explained what each cable does. I ended up getting another brand off amazon and they did not send the correct wiring harness. This unit looks way easier. I may have to get this unit instead.

@akqjtn

2 жыл бұрын

Glad you enjoyed. Thanks for dropping by.

Boost & Shutter, excellent vide as always and super informative! I'll share my experience with a similar (Joying) unit as for the antenna. The plugs provided by this and other aftermarket radios assume the power for the antenna is from the actual antenna connector, it is NOT. Power for all versions of the factory radio antenna is actually from the i35 connector on pin A8 (yellow). I found this out from both my Joying unit and Kenwood radio using the idatalink kit. Both had horrible stereo reception, I eventually found this out using the Service Manual for my car (2019 WRX) and looking at the wiring diagrams. Once I powered the amplified antenna via the correct pin/connector reception was back to normal. I have (had) the base radio but I checked the other versions and they are all the same. Hope this helps!

@earlj3638

2 жыл бұрын

Good tip, thanks! I’m planning on installing my Joying head unit this weekend. Joying seems to get mostly good reviews, but hardly any specific reviews for WRX/STi version

Appreciate the solid install tutorial bro. I just finished installing mine. Dumb mistake I made was, the 1 spot I didn't tape, I put a tiny gouge in. Oof. I ran the dual USB to my glove box but neither of the USB cords are working or some reason. Not even charging anything. Maybe the USB connection came loose on the HU. MIght pop it back out on a later date and check that. I also picked up the Metra adapter to retain the center console usb. It goes idoing usb -> metra -> car center console usb. Overall, getting the 10mm bolts out was the hardest part for sure. I used a magnetic 10mm socket - made it much easier to not drop bolts. I got lucky and my model didn't have a starlink module. Mine's a 2016 base with base sound system. It also had the backup cam integrated into the 28 pin.

I don't even own this stereo or car but I know I will be referencing your videos when I replace my Crosstrek's radio with a Pioneer soon. Thanks for the upload!

thanks for the video this really help me out just got done today with my Idoing Android head unit with carbon fiber for my SUBARU WRX 2019 👍

Great video! I used your guide to install my radio and it works flawlessly! Well almost. I wish there was a good way to keep factory usb/aux locations for the radio but I'm sure I could find something online for that. ALSO, I also have an aftermarket amplifier installed and have alternator whine. You mentioned that you were going to install a aftermarket amp so I'd love to know how exactly you did and some steps to take to make sure everything works well together! Thanks again for helping the community with this video, keep it up!

@cliveosborne8195

2 жыл бұрын

You can keep the factory usb/aux there is a wire you can buy on Amazon or eBay.

@dlrainer

Жыл бұрын

Crutchfield makes an adapter so you can keep your oem usb in the center console. i think it was around $20? so not that bad.

@hectorvidal5757

Жыл бұрын

@@cliveosborne8195 que cable es?

Thanks for the video, it’s been very helpful and informative. I just finished installing mine and it’s great! One thing though, you didn’t mention the 2 additional 10 millimeter bolts that need removed from the sides. There is one behind the glovebox to the left, and one down under the steering wheel and to the right. Recommend to use a magnetic 10mill socket and an extension on both. 🤘

Bro thanks for just taking the time to explain everything

Thank you for you detail video. I never heard of this brand. Thank you again

Looking forward to part two!! I just installed mine a week ago wondering what would be best EQ settings for sound

2015 STI install notes: (appreciated your video very much! I just installed one and thought I would share a couple notes) The bezel is very fragile, I had to drill (open up) the 4 HVAC module holes otherwise they can crack and break using the OEM screws. The top part is even more fragile, I removed the part that holds the hazard and MFD toggle button in place and installed that just prior to final hookup. My first bezel was broken on the top two screw attachment points. Also, to be clear you need to use the OEM antenna. I did not use the iDoing supplied antenna cable. Lastly for 2015 users if you do not care if the reverse camera remains in the MFD and not displayed on the iDoing then just skip that harness all together.

@ramiropascual7818

11 ай бұрын

This was so helpful. Thank you sir. Great video as well!

@thrillingd

6 ай бұрын

Noticing our main connections are different. I only have 2 as opposed to his 3. Hoping this install goes easy

@Augie..

6 ай бұрын

Is there a video or tutorial on how to get the 2015 backup cam to display on HU, even if it displays both. I know you plug some harness into the MFD somewhere but No clue

@chriswade3986

4 ай бұрын

I can’t figure out how to get the camera on the screen

@chadhaslett1818

Ай бұрын

I did see one somewhere about how to do that, you need another wiring harness adapter to do it. I'll look around and see if I can find it.

I appreciate the work you do brother, thorough and straight to the point.

Great video, I'm still on the fence. Got a 2017 WRX. I'm waiting on the next video to make my decision hopefully this 40% deal stays that long lol

thanks bro!!! best step by step on YT.

Man this looks awesome I definitely want one of these

Angel! You got a shout out on Schmeedia video on this. Out here making it.

@akqjtn

2 жыл бұрын

Yeah just saw, thanks for the heads up! I'm fixing to start back up with my own channel (been retiring from the CG so haven't had much time). Hope all is well with fam!

Could you possibly do an oil pressure gauge Install soon? I love your install videos!

Awesome tutorial! The most detailed instruction so far. Just have a quick question, will this work on Subaru Levorg 2016?

This video deserves more likes!!

So helpful. Thank you so much!

Most definitely want this unit. My stock one volume knob does not work and it tends to be off sync with my phone.

Hey great videos! You educated me so much about the sound system. Does the Idoing HU retain the stock aux input ? Or is it wireless only connectivity?

Great video as always! I would assume you did a ton of research between the different brands with similar head units for the WRX/STI, what got you to buy the idoing vs the others? Btw, Your timing is perfect! I was looking for a dashcam and then boom you come in clutch with the 70mai, I'm also getting a head unit soon and im very glad you came this route!

@akqjtn

2 жыл бұрын

I read through some forums and this one seemed the safer one. I was more worried about it getting lost in the mail than anything else 😅 Glad my channel is proving useful!

@kelbaez

2 жыл бұрын

@@akqjtn I hear ya, iDoing is getting a lot of good opinions, im actually looking at Joying which cough my eye first because it has a physical volume knob, but upon further research I see they have been around for some time and have good reception among their users. Also I noticed they release frequent firmware updates.

Thank you for the detailed explanation. This is a great tutorial. I just have one question: I have a 2021 WRX with and I’m planning on getting iDoing unit and after market audio system. What cable should I use to connect amp ignition?

2017 WRX and I just installed the head unit. Everything works except I can't change the volume or skip songs. There were some connectors that didn't have any place to go but every other feature works fine. Android auto, reverse cam ect

Thanks for this guide; it was super helpful in getting my installation done. I actually used everything except the dual USB and the extra amp harness. Everything is working except for the mic, for some reason it doesn't pick up anything. Did you have the same issue?

Amazing explanation of the whole setup. Can you make a small video of what route you would prefer now for upgrading sound in subaru wrx/sti?, for example if you have to do from stock. Thanks for these amazing videos. After watching your videos I'm thinking about doing my audio myself as well

@kelbaez

2 жыл бұрын

There's a lot more info in this channel look for some older videos from when he had his WRX. He did a looot on that one.

@akqjtn

2 жыл бұрын

Did you see my last video before this one? The video description has some links to my WRX car audio videos.

@AbhishekSharma-ch8fu

2 жыл бұрын

@@akqjtn yes. I'll follow them, thanks for the the amazing content.

great video, thank you

Great video! Did you get rear sound on this? I’m having an issue where everything works but the rear sound, but I followed this guide exactly

Awesome video. I want this head unit. The only thing I don’t like is wiring for the GPS and Microphone. I’m not sure how to hide to wires. I saw where you put them but can’t figure out exactly how. Seeing those wires would drive me nuts. Still debating to get this or not.

Love the step by step instructions. Great install. I have a 2021 STI with Harmon Kardon speakers. Will this unit work on my car?

@akqjtn

2 жыл бұрын

I'm asking Idoing about that to make sure I don't give you guys false info. I'll pin the comment when they respond.

@1ledp621

2 жыл бұрын

@@akqjtn they now have one that supports the Harmon Kardon speakers

@tommylevasseur3921

2 жыл бұрын

They answered yesterday, you need an extra CanBus that makes it works. I’ll post the link they sent me!

yoooo awesome video. I love your phone mount set up. where can I buy one?

Great vid bro

7:19 I have the same GPS antenna, I fixed it above the glove box, inside the dash. It works perfectly fine and is absolutely invisible.

Great videos and very informative for those that are thinking about purchasing one. I've had this same head unit for over a year in my 2017 Crosstrek and I love it. Unfortunately for my Crosstrek (non Harman system) I am stuck with the telematics which I have no use for. My dilemma is about connecting a 4 channel Amp for the door speakers, the harness that is included with the head unit only the sub output works using a Y splitter which I am currently using a JL Audio RD1000.1 to power two 15" kicker L7's but I really want to use my existing JL Audio RD400.4 for the door speakers . Do you plan on adding an Amp or two to your system?

@smarie081007

11 ай бұрын

I'm having this same issue trying to figure out. Seems Like some big secret! Did you ever figure this out?

Thank you so much for such a detailed video. What phone case is that by the unit?

Are you going to post a video about your amplifier installation? Are you skipping the existing speaker wire going to the doors? im very interested in doing the same

Great video. I’m planning to change my OEM whole system. In my STI 2021 base model! Ordered already OEM kickers,tweeter,speaker,subwoofer. Is the USB,AUX in the center/arm rest still gonna work if I’m goin to idoing headunit?thanks

Thanks for this video. Since you had a amplified setup with a mainstream head unit prior, what is you opinion on the idoing's sound quality and function. I see others say it sounds better than stock but I have a Kenwood Excelon head unit, an Alpine amp and Focal speakers with a sub. I like Android phones for their customization and I think some of that exists here. Something bigger than 7" that appears to look OEM is good too. The Kenwood's interaction with Android Auto is subpar for me. I use the wireless option and it connects great BUT it will not autolaunch. I typically look at pre out voltage and sound quality but I am hoping this head would be good with the other supporting pieces I have and be a great wireless AA experience. Your thoughts?

I watch your install video and it was on point. The only thing did not work on my head unit is there is no sound coming out when using bluetooth for my music and calls. Do you know why? Or is there anything I have to change in settings? Thanks!

Great video! thanks for the detailed instructions. I have one question. You didn't re-use the metal install brackets from the OEM unit for the new unit or the telematics unit. Are there alignment issues if you use them?

@chadhaslett1818

Ай бұрын

I tried to reuse them on mine and the holes didn't line up.

Awesome video! Bro I will install kicker oem speakers on my STI. Will this head unit Amplify those speakers?? If so how many watts per speaker? I was between doing this or just leaving STOCK head unit and installing ALPINE INLINE AMP to it to amplify kicker speakers… So I want to know which route would be best?? And as far as SOUND quality which is better… Thanks!

Very informative installation video. Just install mine follow what you did but i got the starlink turns red have you encountered that? any idea what went wrong?

I have a 21 limited with HK / Got it installed and everything works and sounds great. Only thing I noticed is the Starlink up in the headliner is illuminated red now. Did you run in to that issue? I moved the telematics over as you did and verified all wires are seated as well as reset the car by unhooking the battery for a few minutes.

Thank you for the awesome video! Finally someone who actually explained the reverse camera wires! I have mine hooked up exactly like u have it in your video, with the 5 pin connection, but I'm still getting NO SIGNAL when I put it in reverse?? Can't seem to figure out what the issue is? 2018 base model wrx sti. Any ideas? 🤔

@megh9806

Жыл бұрын

Did you figure this out? Same issue with a 2019 WRX

@dlrainer

Жыл бұрын

@@megh9806 idoing actually sent me a replacement unit and then it worked fine. So I guess I got a faulty one. 🤷🏼‍♀️

Great video and way helpful. I have a base 18 STI and the speakers sound like garbage. Does this unit help with sound at all? I’m not wanting to upgrade all the speakers yet. Main reason for getting a new unit is for CarPlay. That’s for all ur great videos man.

@chadhaslett1818

Ай бұрын

Sound is 100% better just by changing the head unit.

Thanks for the video couldn’t have done the install without you🙏🏼 where you get that phone mount from though?

@kennedymoreno7116

Жыл бұрын

Sudispeed...OLM EZ SUBARU DASH MOUNT FOR PHONES / ACCESSPORT / MORE

Great video!!! I purchased an Idoing and I have had it for months now however I’m running into an issue with the blue tooth microphone no one can hear me when I try to talk to them. Any ideas?

Awesome, thanks! How does the 2K version differ from this one? Great video

Great video ... Question I installed the Idoing Head Unit in my 2017 WRX that had Harman Kardon and unit works but the speaker output sound is louder on the front Passenger side. If i change the field and shit to each corner of the car its softer on driver front and rear and passenger rear but way louder on the front passenger.. Any idea's why ? I reached out to idoing and they said they had no idea

I'm thinking about getting this for my 2019 wrx is it still just as easy? Granted I'm going to be getting new speakers, an Amp and a sub from a shop so I'll have them do it but I just want to make sure that everything should still be simple still

Hi, maybe this is a long shot, but non the less... I have a 2011 legacy that already has a BT connectivity with the phone for calls (I presume the newer models have it too). Do you still need an additional microphone, or is the one already built in the car enough? Thank you.

Does the reverse camera still retain the delay when you flick it out of reverse? I.e. camera stays on for few seconds when u take it out of reverse

This is the best install video I’ve seen for these units. Thank you. I have a 2017 STi with the Harmon Kardon system. I have everything working but the backup camera. I don’t have the Yellow Cable that some seem to have. So I connected like you did in the video. The other wrinkle is that about a year ago I had Best Buy install a Kenwood unit. They had to add a some extra components, something like a Meastro. Any idea what else I might try? The unit recognizes that the car is in reverse, the screen goes black and then it says there is no signal.

@akqjtn

2 жыл бұрын

Make sure that cable is installed where I show in the video. The connector actually fits two other places where it will not work.

@akqjtn

2 жыл бұрын

Also, you have the can bus adapter? I think HK systems require it.

@mali0049

2 жыл бұрын

Thanks for the quick reply. I double checked the harness position and I have the car bud installed.

I need an installation video like this for a 2016 outback.

great video helped out a bunch. Only issue i have is the front speakers only have bass coming from them. Any help?

Where do we connect a aftermarket USB adapter harness to be able to use the center arm rest 2 USB ports? Thank you!

Great video. Do you know any source for crosstrek 2016 premium idoing installation? I’m having hard time with back camera. No signal.

I was deadass freaking out about the red yellow white cables. Thinking there was going to be some inside before taking out the stock HU. But nope. 💀 also good to know that telemetry box or whatever works the starlink if I decide to turn that back on

Interested in seeing how you wired the idoing to the rest of your system. Is there another video coming?

when i tried installing the clips on top it didn’t want to go in and it broke on the side. when i tried to push it in it jus goes back out. i have a 2015 model so don’t know if that’s different

What's your thoughts on using velcro cable management strips (like what you would do for home cable management for a PC) in place of foam for sound deadening?

@akqjtn

2 жыл бұрын

I'm up for using anything that gets the job done. If you look at when I'm putting HU in you can see I wrapped mine with long velcro straps (the soft side). Works great!

I placed the gps antenna inside the speaker enclosure. There's a perfect spot for it and the reception is not affected.

Good evening i got a question for u if u wanted to keep ur factory mic but wanted to get idoing headunit is that a possibility? And if so how would it work? and what do u need to do different ?

The harness plug on the right side onto the bottom row the big one doesn’t fit with my stock harness to the idoing stereo ? All the other ones fit expect that certain one.Will I need a adapter or a replacement harness ?

How do you get the usb under the headunit console to work ?

I installed this on my base 17' WRX. I have a 10 inch sub and amp in my trunk but am not getting any signal to my sub. Any idea on where I may have messed up? What should I check first?

This is one of the few install videos that get the actual clipping of the plastic bezel in with no problems. One video the top wasn't even clipped in. Since the stock bolt in brackets aren't used that would not be very safe. I assume you aligned all three at the same time before pushing it in?

@NN13K0

2 жыл бұрын

Here are some tips for putting in the head unit: 1) Make sure the inside is clear so no wires/harness is in the way when you push the head unit in. 2) Align the top clips around the vent bezels first. 3) Once they are all in, place a hand on the surface at the top to keep the clips down and in place while taking your other hand and pressing in the clips at the very bottom. You will have to slightly bend (I know that sounds scary but it's not actually bending the unit) to make sure the bottom clips are aligned in the correct position. 4) After the top and bottom clips are aligned, gently push in the sides of the head unit to pop everything in place. Gently press all around the top, bottom, and sides to confirm it's all in.

After installing my Hu everything works fine but the only weird thing is that my reverse camera is not displaying my straight line overlays that the Oem unit displayed when reversing. Any idea why?

Great videos!! All your videos are great. I have a question. Does your oem USB and AUX inside the center console works with the idoing radio? Or only the ones that comes with the radio? Or best case all of them? Currently what's your take on the radio? I'm thinking of getting one for my forester xt. Is the HDMI cable an input or output?

@hudsonprice8492

2 жыл бұрын

i had to use the new USB cables. center console ones were not responsive after install

@yousefhamed

Жыл бұрын

@@hudsonprice8492 do they at least provide power or totally dead after this?

@hudsonprice8492

Жыл бұрын

@@yousefhamed completly dead

Do you happen to know the voltage output of the preamp outputs for the iDoing? I didn’t hear you mention it in any of your videos and couldn’t find it online either. Thanks for the help!

I installed one in my 2021 crosstrek and the rear camera was working, even though it went to an almost fishbowl view. Was messing with options to get the lines back and now the camera doesn't come on when I put it into reverse. Any tips?

Great video my brother one question do these head units work with XM Radio?

@jtme411

Жыл бұрын

I was wondering the same thing about XM after the install...

Hey great video. But do you have to have the microphone installed? As the car already has a built in one, or is it no longer functional with this head unit?

@leoalexander8144

Жыл бұрын

I was wondering the same thing

I did exactly what you did especially with my telematics, still getting no audio from my front speakers only bass, could it be a faulty head unit or canbus?

What is the best paring for this head unit and door speakers/tweeters?

will this be any different if i have an aftermarket amp and subwoofer?

I just got my idoing for my 2015 Wrx I also have the kicker upgrade subwoofer but I don’t know what I need to do to install the sub or is it even possible?? Can you help??

Hey quick question how did you mount the single USB from the head unit, I really don't it just hanging somewhere so looking for suggestions that others have used.

Can you show how you routed your mic and usb? I’m trying to figure out my placement for the usb and how to place my mic in a good spot

This vid is perfect 2020 STI here too. Would you recommend cutting and shortening the wires you don’t need and wrapping them with electrical tape to create more free space back there?

@tylerv4623

2 жыл бұрын

Just unpin them from the connector with a pick so you can add them back if you need to.

@Boost and Shutter - Just got one for my STI and had a pioneer in there before. That one never really worked properly and when I took it off the previous owner has got all kinds of different wires spliced and harness' etc.. I have those 2 grey connectors for the telematics unit, but there isn't one on this current unit. Does that mean I need to purchase a new telematics unit for it to work properly?

Did you have to remove any of the dash under the steering column to access the 10mm? Did you do a test on the double USB?

Thanks for the detailed steps. My only issue with my install is lining it up. It's either the top is short to the bottom. cant get both to fit properly. any advice? Thanks!

@Bwolfson6

8 ай бұрын

Did you ever get it lined up? My 2018 is running into the same thing

@gabrielraneses2654

7 ай бұрын

Sorry for the late reply. Yes I was able to by pushing both sides with a little bit of force. Started from bottom and aligned the top and push both sides in.

@bradwinter7028

5 ай бұрын

Ya I struggled with this when trying to finish it, I found multiple posts on the issue saying you just had to give it a bunch of force to push it into place. Once I gave it more force it popped right in

great vid as always. does this unit have DAB and does it work with the stock antenna for that? Also, does it work with the stock usb input/aux input? I have a pioneer hu and after a lot of research and work i have managed to get it work without having to add anything other than a mic (which i put in the stock location) although i did have to change to a single usb module as my hu thought the stock double one in my car was a hub and didn't like it... also, are you aware that in australia they have front cameras (and passenger side) available for wrx/sti? i got the front camera and have it working but i am sure it would have been a lot easier if you had a vid for it!

@akqjtn

2 жыл бұрын

Hey, I'll have to do some research, but I think for DAB you would need a USB adapter. As far as USB and AUX it does not use the stock ones for that. Thanks for the heads up about the cameras. I'll look I to it.

@4m1t7p

2 жыл бұрын

@@akqjtn just thinking about what i did and i retained the use of the headphone jack as part of the harness i got which also dealt with the steering wheel controls and reverse cam. however it uses 2 rca jacks so i got a converter as my hu required a 3.5mm plug. so with the idoing i think it can be done (and wouldnt even need the converter) but probably need to cut up my existing harness and wire it in manually to the 28pin connector and then plug into the idoing audio in. for the usb, the Metra AX-TOYUSB will do the trick and can be plugged straight into one of the idoing usb inputs (And i could probably go back to the dual usb module i replaced with single). for dab, i found a harness that allowed me to use the existing aerial and connect straight to the back of the HU so this should work with a usb adapter. it took a lot of time (and money!) getting everything i need to try and keep everything as stock as possible and without cutting existing wires and i am happy with the setup but the obd2 functionality of the idoing is whats tempting me - is this something you are covering in part 2? re camera - the part number is 86357VA010 (its not cheap!) and i also bought a t-harness from 12vmods which connects above the washer fluid tank and then runs to the camera which fits in place of a removable insert in the grille - this only works for 2018+ with led srh headlights but i believe it can also be done for older cars/non led+srh but then has to be wired in to the back of the MFD and is a much bigger job. if you were going to do it the info is out there to simply make your own t harness or even just splicing wiring if you don't mind doing that... also, i don't think the side camera will be an option for you as australia drive on the same side as us (UK) - it requires a replacement lower part of the side mirrors that have somewhere to mount it and these will not be available for right hand side mirrors...

@4m1t7p

2 жыл бұрын

@@akqjtn oh and the aliexpress site comfirms a usb adapter is required for dab...

I've read a few posts where people have complained about hearing "white noise" or the dreaded electrical hum when using this unit and an aftermarket amplifier - have you run into this issue?

hey brother, so I have this exact head unit and a 2017 sti. I want to do a simple 4 chan amp to the door speakers using the oem wiring. can i splice into the idoing harness instead of the oem harness??

Hi, can you help me? I'm interested in buying the radio, but I have a question and does it keep the 2 original USB ports or are there cables left in the glove box?