Windy City Woodturners demo with Andy Kuby (President of the Chicago Woodturners demoing “Inside out Turnings”. He shows a number of various combinations and ideas.
Жүктеу.....
Пікірлер: 29
@tommyschutz90087 ай бұрын
very goood video. I was trying to put a little unicorn in the middle, and make a flat bottom. I think you answered my question, glue it in before you do the second glue up. Thanks, Tommy
@davidanderson57677 ай бұрын
Thank you from Wisconsin.
@jeffrosen82372 жыл бұрын
This is amazing! Simple but the outcome looks difficult! I appreciate you sharing!
@donfillenworth17214 жыл бұрын
Very interesting! Thanks for sharing.
@kathymoser9750 Жыл бұрын
Thanks so much for sharing! Love to learn new techniques for me !!!
@coswood34543 жыл бұрын
Thanks for sharing they are beautiful 😊
@chris_thornborrow4 жыл бұрын
the bead columns are very interesting. thanks.
@Walking-the-coast3 жыл бұрын
Excellent demonstration and craftsmanship, thank you.
@turkeycreekknives1334 жыл бұрын
I like the idea of the diamond shape
@ffaubert13 жыл бұрын
Great video! Still trying to wrap my head around the cross. I get that the ends of the trough would be done with either a parting tool or Satan's can opener (skew) but are the arms done further into the wood? I guess I'll try some stuff on the lathe tomorrow to see.
@mattberg9162 жыл бұрын
Pretty cool. I've thought a few times how to make a cross that is visible as a cross from all directions. This looks like the answer!
@windycitywoodturners8256
2 жыл бұрын
Glad it helps. Enjoy!
@richardschaffling98823 жыл бұрын
Great video
@jalti83663 жыл бұрын
Great video. I would really like to do the inside out with 3 pieces. Can you give me more information on how you setup the table saw?.
@zenink26543 жыл бұрын
I'm confused about how the cross shape was made. Very cool stuff!
@paulahemphill14123 жыл бұрын
Could you use small zip ties to hold the pieces for the first turning?
@windycitywoodturners8256
3 жыл бұрын
Not sure they would not rattle with lathe speed and tool applied?
@jessetutterrow4320
3 жыл бұрын
I would not trust them. I have pulled on wires in a bundle held by cable (zip) ties and had the ties come undone. I would hate for one to fail at turning speeds!
@danield9542 жыл бұрын
Question, is there any reason not to use a lathe chuck in this application? I would think the chuck would be a safer alternative than a drive center.
@windycitywoodturners8256
2 жыл бұрын
Probably not. As long as things are on center, the results should be the same.
@bumpersmith4 жыл бұрын
This is not meant to be a professional made video. These are demonstration videos made by wood turner's trying to educate the viewers on a particular topic. Our club (Hiawatha Woodturner's) records videos also and the guys that are dedicated enough to do the recording of the demo, edit the videos and then upload them are to be congratulated for the efforts in my opinion. Negative comments on the video recording do nothing to improve the intended educational content.
@windycitywoodturners8256
4 жыл бұрын
Garry Smith thanks Gary, I’m the video guy and also a retired football coach. I’ve heard many a fan yelling what they would call if they were calling plays. To me, it just another fan in the stand. Somehow this channel has over 1200 subscribers and over 100,000 views. Thanks for those kind words.
@bumpersmith
4 жыл бұрын
@@windycitywoodturners8256 Keep up the good work.
@bumpersmith4 жыл бұрын
If there is interest in some other shapes for Xmas ornaments then maybe you would like to take a look at some I have done in the past with inside out ornaments inside of inside out ornaments turned together. Envisioning the inside while turning can be a challenge when aiming for a certain shape such as a tree. Here's the link kzread.info/dash/bejne/gmd9zrawj7WaebA.html
@windycitywoodturners8256
4 жыл бұрын
Garry Smith I hope all look at what this gentleman has shared. They take inside out turning to a whole new level. Amazing work.
@brucemartens24182 жыл бұрын
Please note.. we all don’t the process of brown paper glueing
@markb89544 жыл бұрын
Some interesting ideas here beyond the standard inside out turning. The audio & video quality really needs improvement - rather hard to watch with both being sub-par.
@robertocoiante19814 жыл бұрын
Chi gestiva quella telecamera sarebbe dovuto prima andare a scuola. Ha sminuito il suo lavoro.
@glencrandall70514 жыл бұрын
I couldn't watch this to the end. The camera work is too poor.
Пікірлер: 29
very goood video. I was trying to put a little unicorn in the middle, and make a flat bottom. I think you answered my question, glue it in before you do the second glue up. Thanks, Tommy
Thank you from Wisconsin.
This is amazing! Simple but the outcome looks difficult! I appreciate you sharing!
Very interesting! Thanks for sharing.
Thanks so much for sharing! Love to learn new techniques for me !!!
Thanks for sharing they are beautiful 😊
the bead columns are very interesting. thanks.
Excellent demonstration and craftsmanship, thank you.
I like the idea of the diamond shape
Great video! Still trying to wrap my head around the cross. I get that the ends of the trough would be done with either a parting tool or Satan's can opener (skew) but are the arms done further into the wood? I guess I'll try some stuff on the lathe tomorrow to see.
Pretty cool. I've thought a few times how to make a cross that is visible as a cross from all directions. This looks like the answer!
@windycitywoodturners8256
2 жыл бұрын
Glad it helps. Enjoy!
Great video
Great video. I would really like to do the inside out with 3 pieces. Can you give me more information on how you setup the table saw?.
I'm confused about how the cross shape was made. Very cool stuff!
Could you use small zip ties to hold the pieces for the first turning?
@windycitywoodturners8256
3 жыл бұрын
Not sure they would not rattle with lathe speed and tool applied?
@jessetutterrow4320
3 жыл бұрын
I would not trust them. I have pulled on wires in a bundle held by cable (zip) ties and had the ties come undone. I would hate for one to fail at turning speeds!
Question, is there any reason not to use a lathe chuck in this application? I would think the chuck would be a safer alternative than a drive center.
@windycitywoodturners8256
2 жыл бұрын
Probably not. As long as things are on center, the results should be the same.
This is not meant to be a professional made video. These are demonstration videos made by wood turner's trying to educate the viewers on a particular topic. Our club (Hiawatha Woodturner's) records videos also and the guys that are dedicated enough to do the recording of the demo, edit the videos and then upload them are to be congratulated for the efforts in my opinion. Negative comments on the video recording do nothing to improve the intended educational content.
@windycitywoodturners8256
4 жыл бұрын
Garry Smith thanks Gary, I’m the video guy and also a retired football coach. I’ve heard many a fan yelling what they would call if they were calling plays. To me, it just another fan in the stand. Somehow this channel has over 1200 subscribers and over 100,000 views. Thanks for those kind words.
@bumpersmith
4 жыл бұрын
@@windycitywoodturners8256 Keep up the good work.
If there is interest in some other shapes for Xmas ornaments then maybe you would like to take a look at some I have done in the past with inside out ornaments inside of inside out ornaments turned together. Envisioning the inside while turning can be a challenge when aiming for a certain shape such as a tree. Here's the link kzread.info/dash/bejne/gmd9zrawj7WaebA.html
@windycitywoodturners8256
4 жыл бұрын
Garry Smith I hope all look at what this gentleman has shared. They take inside out turning to a whole new level. Amazing work.
Please note.. we all don’t the process of brown paper glueing
Some interesting ideas here beyond the standard inside out turning. The audio & video quality really needs improvement - rather hard to watch with both being sub-par.
Chi gestiva quella telecamera sarebbe dovuto prima andare a scuola. Ha sminuito il suo lavoro.
I couldn't watch this to the end. The camera work is too poor.