Three years on and I am setting up my 7100 (having followed your instructions years ago for the 7300 which is my main rig). Great instructions as always Tom, thanks - Terry G0BIX

@HamRadioA2Z

Ай бұрын

Im glad they’re helpful

Tom, I hope you are going to continue this series. I notice new videos on the 7300 and 705, but not the 7100. Really appreciate them,

Really glad to see another video in this series for the 7100

I came across this video by accident. I've being struggling with the setup for digtal for some time. You not only explain the radio setting but also some of the FT8 settings. Thanks for this video.

So thankful for your help. I have literally spent hours trying to set up my 7300 & 7100 on FT8. Your video really helped me. a VERY BIG THANKS!! - V31ZA

@HamRadioA2Z

3 жыл бұрын

Thank you for the kind words Keith. Glad you got FT8 working. Hopefully we’ll work someday.

Love this series. It has really helped me learn to run my 7100. Thank you. N3WST

Thank you for this! I have struggled getting WSJT-X working with my 7100.

Great video and thanks for the easy to follow instructions.

Tom nice info on FT8 operation on the 7100, in fact that entire series is well done and most informative.

@HamRadioA2Z

3 жыл бұрын

Thank you for the kind words. I’m glad you’re enjoying the videos.

Endlessly helpful video. Thank you!

You're an extremely good instructor. Thanks!

@HamRadioA2Z

2 жыл бұрын

I appreciate that! Thanks for the kind words. 73, Tom

very well explained

Tnx lost my audio after experiment with other program. Your video fix it.

@HamRadioA2Z

Ай бұрын

Glad it helped.

Nice intro to data

You are the best ELMER EVER!!!!

Just a note for anyone else that runs into this. If you use "split mode = rig" in WSJT-X you run the risk of having your A freq USB-D but your B freq might be just USB. If your B freq is not set for USB-D then transmit will completely fail. I was pounding my head on the wall with that for longer than I would have liked. The alternative would be to use the "fake it" setting and this won't be a problem.

@HamRadioA2Z

6 ай бұрын

Very useful tip. Thanks!

Thanks for your great explanation! 73 de PU2-UBB, São Paulo, Brazil

Thanks for the videos on the 7100. They have been invaluable to me. If I select RIG in my settings, Split changes the frequency way out of the FT8 range, sometimes it changes bands to transmit. Not sure what I have wrong. If I set it to Fake it, it works fine.

@HamRadioA2Z

2 жыл бұрын

Hi Bobby. I haven’t played with WSJT-X in a while. I’m not sure why it is behaving that way. When I get a chance to try it out, I’ll let you know if I find anything.

@davemould4638

2 жыл бұрын

I have not found that with my IC-7100 using WSJT-X The frequency changes just as I expect it to - a kHz or so either way. Winlink works very well with the IC-7100 Not only does it change the band and frequency, but it also changes the IC-7100 to USB-D when you go to "open session"", and changes the frequency and mode back to where it was when you close the "open session" window, allowing seamless operation with no fiddling around. Incidently, for anyone who uses Winlink without a hardware modem, it is well worth installing and paying for the high speed version of VARA, which is by far the best software modem I have used, giving high data rates on unbelievably weak signals, and changing the data rate dynamically as signals fade in and out.

very good info very professional vy 73 elan

thank's for info.....good job . Eduard EA3EXE

Thus us a great series. Thank you very much for presenting it.

Hello! I watched all your videos about IC7100. Thank you for taking the time to make them. Just a comment, Almost every mode has it's datamode. USB -> USB-D, FM->FM-D (Aprs for example), WFN (No data mode off course). I mention this because I was listening WFM commercial radio the first time I bought my radio and I wanted to set data mode while I was watching your video and there was no DATA option to set in the menu!! It will be available when you switch to the proper mode and band plan.

@HamRadioA2Z

2 жыл бұрын

Yes. You definitely need to be in a valid mode where you can transmit in order to select DATA. You'll also notice that in DV mode that DATA is replaced by GPS. The GPS option lets you select whether you want to send GPD DPRS data with your transmission or not. You can definitely send data in DStar mode, but it's not going to come in as audio through the USB port. It's a little different process.

The reason that audio is transmitted between 1500 and 2000 hz is so there are no harmonics in the audio passband that is transmitted. The (second?) harmonic of 1500 hz is 3000, which would be filtered out and not put out on the air. It's easy to see when someone is transmitting below 1500 hz.

I love all of your vids! Question, does the 7100 have the ability to save and store different/various settings--like the 7300 does--so you can quickly/easily jump back and forth from digi modes to SSB, or do you have to go through and manually change/change-back each time??? Thanks!

@HamRadioA2Z

2 жыл бұрын

Hi Tim. Thank you for the kind words. You can press SET and go to the SD Card Menu. The Save Settings and Load Settings functions can be used to save and load different radio settings. The 7100 does not have “Presets” like the ones introduced in the recent IC-7300 firmware update.

I am having a devil of a time getting started with digital using USB connection. Almost every time I open the program the serial port connection fails and I have to play with the config to get it connected again. All the same settings are used but it's like I have to wake something up to get things working. Also am I going brain dead or is the manual missing a digital using USB connection section in the 'Full' menu?

one of the best instructors and video on KZread. Just a question on the Filter FL1 setup for FT8 is it setup for default and can that be changed?

@HamRadioA2Z

2 жыл бұрын

FL1 is fine and the default is probably fine. For WSJT-X, you want the filters in the radio set as wide as possible. The WSJT-X audio processing software takes care of it's own filtering and sorting out the signals. Trying to set the radio filters more narrow would actually hurt more than it would help.

Why does my 7100 in wsjt when goes to transmit, only on USB and not USB-D

Great videos! I’m up and running on digital modes using fldigi and flrig. One question. When I go to use voice without the computer connected my audio feeds back into the speaker (not good) and headphones (perfectly clear). Is there a setting I am missing when using voice mode? Thanks for any help

@HamRadioA2Z

4 ай бұрын

In the SET mode menus there is a setting to turn Monitor OFF. It’s either in the Connectors or the Function sub-menu.

Hi Tom: Thanks for the video. I’m playing with my 7100 now. I’m trying to interface my phone to the radio. RX seems to work, but I can’t seem to TX. It looks like VOX doesn’t work on the Data2 jack. Is that correct? Maybe it works with the ACC plug? I do get audio only if I key the radio through the Data2 jack. No VOX. Thx de KB2MEN

@HamRadioA2Z

Жыл бұрын

Hmmmm… I’ve never tried VOX with the Data2 jack. I thought that VOX would work regardless of where the audio is coming from. I’m quite certain VOX will work with the Accessory connector, but I haven’t actually tried it. Maybe it’s time to do some experimenting.

Tom Have you got a video on how to save our contacts onto the SD card so we can upload our contacts to QRZ LOTW etc etc

@HamRadioA2Z

3 жыл бұрын

Hi Kelvin. It’s a great radio, but I’m afraid it doesn’t have that much capability. For logging you’ll have to use a computer with a logging program. With a computer connected, at least the radio will help fill in the band, mode and frequency.

Hi Tom, just one question, what do you turn up in the icom 7100 menu to make more audio sound level (volume)to come out the usb port, what i think it is i have moved from 50% to 70%, but doesn't seem any louder hi...Fred g4vvq.

@HamRadioA2Z

2 жыл бұрын

Hi Fred. You should be looking in Set Mode under the Connectors sub-menu. The setting you want to change is ACC/USB AF Level. That setting changes audio output level for both the accessory connector and the USB output. You could also change the audio input level in the Windows settings for the USB audio input. I tend to leave the radio set at the 50% default and change the settings in Windows, but either way is fine. They both have the same effect.

Love your videos but I have a question any clues why my fervency is not showing on my lop top? The bar where the frecency is supposed to be is red any clues ? Thanks in advance 👍👍

@HamRadioA2Z

2 жыл бұрын

Which program are you using?

@martinmaciel9780

2 жыл бұрын

Wsjtx

@HamRadioA2Z

2 жыл бұрын

Hi Martin. It sounds like something is wrong with the COM port settings. Check that you have WSJT-X set to the correct COM port and that the baud rate settings match

@martinmaciel9780

2 жыл бұрын

Thank you so much I will definitely try that thanks again

Followed your settings, but everytime I click on a call, the icom 7100 leaves usb-d and goes to just usb.????

@HamRadioA2Z

3 жыл бұрын

Hi Tommy. In the settings, under the Radio tab there is an option on the right side of the screen labeled Mode. Make sure that either None or Data/Pkt is highlihted. If USB is highlighted, it will change your radio back to USB (not -D) every time it goes to transmit. If you set it to None, then WSJT won't do anything with the mode and you will need to make sure it is set to USB-D for every band. If you have it set to Data/Pkt and the radio type is set to IC-7100, then WSJT will switch your radio to USB-D regardless of what mode it was in.

@tommyleboeuf1818

3 жыл бұрын

@@HamRadioA2Z thanks problem solved

How you setup a data 2 socket on ic 7100

@HamRadioA2Z

2 жыл бұрын

Hi. What is it you are wanting to do? If you want to do AX.25 packet data you’ll need either a TNC or a sound card interface and TNC software for your computer. If you buy a commercial TNC, it should have basic instructions for connecting to a radio. You can find the pinout of the data-2 connector on page 18-2 of the Advanced Instructions manual.

I disagree with using WSJT as the example. The reason is this - FT8 and other modes of WSJT are usually used at low power (around 5W), while other data modes (e.g. SSTV) are not. This is why WSJT has its own power output slider, which you will not find on other digital programs. So my method is to set the audio output level to the radio using some other digital mode program, such as EasyPal or Winlink or an RTTY application etc. I've found that most PC programs have similar input and output levels so you do not need to adjust levels when changing between them. Then in WSJT, leave the radio and soundcard levels alone, and also leave the radio's power set to maximum (or your normal operating power), and adjust the output power for FT-8 by using the power slider of WSJT. In that way you do not have to adjust anything when switching between different data mode PC applications.

JS8Call

Hello