Great fix once again... can you please make a same fix video about PDSSAP 20-Li B2 impact driver? Thanks for spreading your electronics expertise...

Great saving Brother! One more power tool brought back with ease thanks to professional workmanship 👏

Very good explanation and text/video edit on what's going on. Entertainment AND Education at the same time 😀. Much respect Brate!!!

@ErCanEverything

4 ай бұрын

Thank you my Friend😊🤝 Blagodarya🙂

Dear friend, sorry for the boldness of this message, but I saw your video, and as I have the same problem on my parkside, it's the same model as yours, I decided to buy the module and exchange it. Now the machine is responding but has started to emit smoke in the engine area. I'm not very experienced so I decided to ask for your help if you want to help. I thank you in advance for the teachings you always share. Compliments

I know I've written this before, but I have to say it again, your work is simply fantastic, I never tire of watching it and trying to learn. Thank you very much for sharing. I would like to ask you if this machine loses any strength or characteristics after this change? I have the same one, when I try to turn it on, the engine signals but it doesn't turn, is it the module or is it something else? If I can respond, I will. I thank. I wish you much success for your extraordinary work. Greetings from Portugal, thank you

I've watched the video from start to the finish. Very good job 👍👍👍

@ErCanEverything

4 ай бұрын

Thank you my Friend🙏🙂🤝 This is a video that consists of 2 parts, the first part was filmed about 5-6 months ago and I just finished the second part now🤦. I always thought it would be time for the second part as well. 🤔😌🙂😊

Неплохо, но я все свои китайские разбирал и усиливал дорожки, так же менял на большее сечение от колодки к плате. Итог всего, стало сложнее увести в защиту инструмент.

Salut j ai fais la même chose ça va super bien 👍 merci pour l investigation pour la détection de de composant défectueux sur la carte d origine .

Its a great fixing video, but hey parkside / lidl has a 3 year warranty, and i dont think this angle was older than that period :P

@ErCanEverything

3 ай бұрын

Yes, however, this angle grinder is from a flea market and had no warranty😁🙂

@vaclavvejborny7336

3 ай бұрын

5ys for performance.

Awesome

In the angle grinder was undervoltage protection (yellow wire in battery terminal)how do you solve that?I dont find any word in the product description.If is not present,grinder will suck the battery dry so destroy it 🤔

@bobikbobikowy5458

4 ай бұрын

I got similar controller in my chinese brushless drill and it stops working at around 15V. Not sure if all of them have that though.

Very nice and very happy ❤❤❤

@ErCanEverything

4 ай бұрын

Thank you my Friend🙏🙂🤝

@Dadoune-et-saadoune

4 ай бұрын

@@ErCanEverything thanks 👍

Excellent❤

Very good 👏

Hello.milwaukee repaired? Were to find controler for m18 brushless ?can I replace controller with another one?i can't not find original (just complete and cost to much)that controller is good for all type brushless motors?where to find it?

Wow so there's more with same problem I used mine once and it failed when the metal gripped the disc 😂

удоволствие е да те гледам как работиш

@ErCanEverything

4 ай бұрын

Благодаря ти Приятелю🙏🙂🤝

Hi, Great video. I've got the exact same problem with mine, the only difference is that mine si the flat head one with no physical button on it. Would you be able to help finding the right controller for that model? I've been looking online for ages and I can't find anything about it. Thank you!

@pawelw.9172

4 ай бұрын

you got almost a new tool, send it for warranty.

Why did you bother opening the old controller if you were going to replace it with another one? Also, couldn't the blown MOSFETs have been replaced to fix the board? Was the controller IC also blown?

@ErCanEverything

3 ай бұрын

I thought it would work after replacing the transistors, but after removing them and measuring, I found out that the gate driver was also burnt, which could not be found🤷

Isn't the grinder weaker with the new controller?

@ErCanEverything

4 ай бұрын

As I feel the difference is not more than 10% or even no difference in power🤔

my D4 died after 3rd usage. I used jus about 1mm of cutting disc. Then magic smoke on 2nd speed.

Hey. How can I remove the two wires between the plus and minus that connects to the battery in order to make it work with another battery???? S and id I think! Just want the remaining plus and minus and exclude the other 2

👏👏

This controller is compatibile with Cordlles jogsaw parkside psspa 20?

@ErCanEverything

3 ай бұрын

This controller works with all 18V - 20V tools which also has 14 - 15V low voltage protection!

Can you make video with model pwsap 20 LI E6?this model has control panel with touch. I bought a control board with connector but i think the wire configuration is diferent than the original controller. If i connect a button from a screwdriver, it works perfectly. Can You please help

روعة ولكن من اين جاءت هذا الكارت

А где здесь восстановление? Поставить новый модуль любой сможет 😊

does someone knows why these parkside grinders sounds so horrible like they already broken ? if you compare it with bosch or milwaukee, you dont have this scratching resistance sound with is shown in the first minute

Whay gate driver cannot be replacement? It's not availlabe anywhere?

@MrFrambooise

4 ай бұрын

Are you asking about the whole controller assembly or about transistors? Transistors cannot be properly replaced, because it got hot so much it fused with copper.

@ErCanEverything

4 ай бұрын

I don't think It's available anywhere and I even transferred from another non-working one. But it also came out burnt🤦🤦🤦

@tomaszw5156

4 ай бұрын

@@ErCanEverything, @MrFrambooise ok, but in such drivers only the transistors are damaged (together with the PCB) and the rest of the integrated circuits are functional?

@ErCanEverything

4 ай бұрын

@tomaszw5156 In this case, I waited 5-6 months for a donor PCB, which I first installed a driver and it came out with more burnt channels than the first one, which is not in the video.

@MrFrambooise

4 ай бұрын

@@tomaszw5156 most likely yes, but since alot of copper is missing the conductivity will not be sufficient enough, and increased resistance means more heat.

you say! stop brushless tools! only 1% people can repair them.

@ErCanEverything

4 ай бұрын

🤔🤔🤔🤷

Better get a dewalt or milwaukee or flex grinder, more power

You made Faster video please

Esc rc controller ....

@ErCanEverything

4 ай бұрын

And this is an RC controller but look what it does😉 kzread.info4RbN08hu0RM

You are Gina's engineer

C'est de la merde parkside 😂😂😂

You made slow video I don't like slow video

@ErCanEverything

4 ай бұрын

Because you play Subway surfers😉

@DDad-yq1ig

4 ай бұрын

What

@ErCanEverything

4 ай бұрын

I make slow videos, you don't like it because you play a fast Subway surfers game🙂

@DDad-yq1ig

4 ай бұрын

What I don't play Subway surfers

@jimmytvfclassic

4 ай бұрын

Set playback speed on settings to x2 then 👍