I Turned a Warhammer Spaceship into a DRONE
Тәжірибелік нұсқаулар және стиль
After making a warhammer tank fly it was only fitting that i made something thats meant to fly this time. So i made a Tau devilfish fly by remote control, this is my build video.
⭐️Support this page on Patreon and receive exclusive and behind the scenes additional content: / groundeffected
⭐️ For more videos like this:
/ groundeffected
The Printer: Uniformation GK two : www.uniformation3d.com/produc...
Get $80 off when you use Code: ground
Or here's the Amazon link: amzn.to/3wgaDrk (Unfortunately, no discount code for this)
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ US Amazon LIST:
Tools and materials used:
▪️ Hobby knife: amzn.to/3wBFKxP
▪️ Tweezers: amzn.to/48IAd60
▪️ Sprue nipper: amzn.to/3TfYGL9
▪️ Needle nose pliers: amzn.to/3SPogW4
▪️ CA Accelerator: amzn.to/3UYxj9P
▪️ Big bottle super glue: amzn.to/3SWfyp8
▪️ Masking tape: amzn.to/49Np58w
▪️ Better memory stick for your printer: amzn.to/49NprvS
▪️ Aligator clip with wire: amzn.to/49KgUdu
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
Paints:
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
🖌️ UK Amazon LIST:
Tools and materials used:
▪️ Hobby knife: amzn.to/3P3Z8dc
▪️ Tweezers: amzn.to/3P2HFl9
▪️ Sprue nipper: amzn.to/49WIp3v
▪️ Needle nose pliers: amzn.to/48zj5PV
▪️ Accelerator: amzn.to/3uHy0tD
▪️ Superglue: amzn.to/4bPD6ol
▪️ Masking tape: amzn.to/3wHw6tf
▪️ Better memory stick for your printer: amzn.to/3Ij13qr
▪️ Crocodile clips with stick: amzn.to/49NeYRT
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How to Paint 3D Prints, How to Paint 3D Printed Parts, How to Paint Models, Model Making Techniques, Model Building Tips, 3D Printing Ideas, 3D Printer, Easy Painting Techniques, Painting Miniatures, 3D Printing, LED Lighting Effects, Follow Along Painting, 3D Sculptures, Finishing 3D Printed Parts
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZread channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
Пікірлер: 340
Thats my DAD! I am so proud!
@Groundeffected
3 ай бұрын
🍾
@countmalin70
3 ай бұрын
So you should be this was awesome !
@mahtix1
3 ай бұрын
@@countmalin70 in his shadow i am destined to live.. but grateful to bask in his glory!
@YouTubeisRunByChildPDFiles
3 ай бұрын
@@mahtix1When did you get into a Warhammer?
@mahtix1
3 ай бұрын
@@KZreadisRunByChildPDFiles second edition box was my first time. i think year was 1992.
To see a model come alive like this is so incredibly cool
@letomccann4606
3 ай бұрын
i 100% agree
Can you imagine 10 or so fly in formation onto a battlefield. Very cool. The paint job looked A+ too
These deserve sponsorships. Awesome build
@Groundeffected
3 ай бұрын
I got to figure out how to get them to get views first. Some reason my latest ones just don’t get good enough numbers to approach sponsors.
@l33tpie
3 ай бұрын
@@Groundeffected I feel Redbull might be a long shot but also terribly fitting.. The guys that do online games sponsors for them are pretty chill just tell em how it is.
Need to get Tau Nick from Play on Table Top, he would love this
Dude this is one of my favorite 40k hobby videos. I really hope you can get some sponsors so you can make some more of these videos. I hope you can make an ork one soon.
@Groundeffected
3 ай бұрын
I have made an ork one. And that one was the worst performing one. Also that was the one that I managed to get sponsored and it was a big sponsor that won’t work with me again due to the poor performance lol. Sucks but such is life I guess
@sillylung
3 ай бұрын
@@Groundeffected yeah I saw that video after I posted this. That was such a good video. It's bullshit that the sponsor won't work with you again. I was thinking about getting some shirts from them but hearing this is making me rethink it because like I said that was a great video.
Great custom,great paintjob. Only a single flaw, you didn't scream IT'S ALIVE! IT'S ALIVE!!!
Dude, you are such a breath of fresh air in the hobby / painting / whatever space we’re living in. Thank you!
Amazing! Now you need to do 40K racing!
As a tau player, this makes me so damn happy! Nicely done!!
This is amazing! I would love to see a game sesh of this on an unsuspecting player and just see them lose their mind when it takes off 🤣
That is such a cool little project! It's always nice to try something different and to see the look on your face when it first flew was priceless! Also, if at first you don't succeed...then you might want to skip parachuting out of an aeroplane, but also you just prove how it's a process of trial and error and you got there in the end! Bravo Sir! Great stuff...more of that!
@Groundeffected
3 ай бұрын
Haha I was terrified to break it but also terrified it would attack me and also excited. It was too many emotions. Hahaha
@Desmo904
3 ай бұрын
@Groundeffected You pursueded me to try LEDs for the first time in a 3d project btw! Singles, COB & filament all in one object! Lol! 😄
@Groundeffected
3 ай бұрын
@@Desmo904 hell yes. And now do you feel like a friggen genius or what?!? Hahaha it’s so good to do these silly little things makes us feel like bloody ironman
@Desmo904
3 ай бұрын
@@Groundeffected Absolutely! I arr Jeanyus! Only problem was I used so many I had to power it with two 5v PSU's. Too much of a good thing! I think it will be a while before I tackle anything flying though!👍
Tau is my favorite 40k army and I loved this
Having the guts to fly this War machine inside your shop with all your models around like the loky etc is just crazy But dad, don't deck tan contest and fly :))
Fantastic! What’s next, working space man backpack? Working plasma cannon? World hunger? Awesome job!
these are some...uh...werds: AWESUM VID BRAH!! i was right there with ya laffin' when it worked (test flight 1) great job! ;)
Setup a obstacle course and do a race between the repulsor and devil fish
I demand you start assembling these in mass.
This is unbelievably cool. now I want to try making an RC 40k vehicle.
Awesome modifications. I hope one day you want to do the same with a necron monolith ❤❤
This vid takes me back to RDJ in Iron Man! Totally mad, Dad!! Respect from India!
Ah, a new venture into the word box! I do not play the hammers of war, nor am I overly fond of little robot spacemen, and last I do not "RC" anything, as that would reduce my funds for most everything, save breathing. (and that statement may not age well). Yet I find myself fascinated by you doing all those things.
Dad, that is freaking awesome!
I love this Break stuff, Make stuff energy you bring every time. Stellar work
Incredible work. Please share!!!
Fantastic love, War Hammer. the paint detail on the drone is excellent.
Absolutely awesome!
That is one awesome build and paintjob.
I started my toy painting journey with Tau 25 years ago, this is absolutely sick. I want one so bad, lol. You are definitely my offspring. Proud of you, son.
warhammer fans are on there own level. Looks grate!
You are awesome man and I appreciate the effort you put into your passionate projects.
Amazing and there is always room for lunch! Great work!
Wow, amazing how you build this. Great job.
You are crazy in a good way. Amazing work. I look forward to more lights and electronics in your models. Also, you need a full on collab with Squidmar.
Love all these Warhammer RC conversions. Keep it up, looking forward to seeing more.
Just AWESOME!!
That's really cool. Love it.
This is so cool and original. Love it!❤
Awesome stuff. I love and watch all of the RC videos
Awesome work dude! I definitely would love to see more like this
Awesome work
congratulations! Awesome build.
Wow this is amazing. Such good work in building it and that paint job is so slick.
The Tau gangsta till the bane blade starts flying
Great video ! Loving the commentary. Great work!!
VERY cool to see another drone hobbiest! My friends call me a drone junkie.. have over 20 drones of all sizes .. from an octocopter to micro's. This is a really cool project!!
Very cool! I love watching it flying around
@Groundeffected
3 ай бұрын
Me too it looks so cool flying.
Super sick sir, seriously! Absolutely love this!
Awesome build
An absolutely fantastic conversion, loving all those ones your done, keep it the awesome work
all of your rc builds are glorious but there was something absolutely magic about seeing that little fish fly!
love you narrations and your skill
Fantastic work!
Man, that's dope. Keep up the madness.
Great work, I'm converting a forklift to RC right now and hoping it's as good as this.
Love it!!! Keep up the awesome work.
Nice work mate! I showed it to my Gran and she really loved it.
Awesome work. *starts to ponder how many drone motors would be needed to make the Manta fly...
I like your flying things good work
Awesome work on all of them. I never thought somebody would be able to RC any 40k vehicle, but you've proven me all kind of wrong. Please continue the madness; it's really inspiring 😎👍
Thats insane work, like every video you make!
This is freakin awesome, love it.
This is so cool!!
Brilliant. Superb.
I feel so very engaged. I would gladly click any sponsorship links in this video and would make a purchase of a related product or service. It's very double good positive purchase opportunity. So engaged.
@Groundeffected
3 ай бұрын
Ah thanks dude. I appreciate, but don’t worry you don’t have to click no links just enjoy the video
@Kroeghe
3 ай бұрын
@@Groundeffected I enjoy them a lot and I'd like to see more - which isn't going to happen if you decide it's too expensive for you to do them. I'm partial to clicking some links under videos of people I like.
cool project
LOVE LOVE LOVE THIS!!! I especially LOVE the black outline paint job on it, that makes it look a BILLION TIMES BETTER!!!!! Great video my friend!!! 💯🔥🔥🔥🔥🔥
Amazing work !
You should 3D print some of the BFG (space 40k) ships and motorize and arm them, and then have an RC space war
That's awesome!
So great!
Awesome, Awesome, Awesome.
Dude what a piece of kit. I don’t even Warhammer nor fly drones. Appreciate your ‘why not attitude’ subbed from Australia.
Totally sick man! Love these RC builds! I hope a sponsor will have the balls to link up with ya for one again!
Leaving words here so algorithm can aknowledge this video is great.
This is really cool and impressive and I hope youget to do more awsime builds like this.
Awesome job mate ....
Epic! As always.
So cool !
I always love your projects
Crossfire is awesome, but anyone else wanting to do this, elrs is very good as well and cheaper. Awesome project. Next one needs to be fpv though lol is that a tx16s radio? You must fly other drones or planes?
@Groundeffected
3 ай бұрын
I fly anything with wings rotors or props. Haha fpv quads my main though.
You've really out done yourself this time
@Groundeffected
3 ай бұрын
Thank you 🙏
Awesome, make a Tau Manta drone next please.
I couldn't stop grinning all throughout the video. I'd really love to see this in a pre programmed mass drone display where they all fly in unison, that would be hilarious.
@Groundeffected
3 ай бұрын
I’m so glad you liked it !
Great video as always and excellent build dad.
Awesomesauce!
Fantastic Job man! you're quite famous here in my local group in Italy! smashing paint job too!
Awe boet. Proper cool build.
So increibly cool
Wow man, keep it up.
Some words to appease the algorithm gods because your vids need to be seen by the masses.
@gekkegengis
3 ай бұрын
agreed 👍
Awesome! Repulsor Executioner vs. Devilfish dogfight, please!
looks like fun
This is just the video I needed
Genius!!!
Commenting for the support. Love your work. Would love to see more footage of the painting.
@Groundeffected
3 ай бұрын
There isn’t any painting video for this. As it is I struggle to get views so I tried to keep the video short and to the point. Honestly I don’t even know what I’m doing haha
@shenkel838
3 ай бұрын
@@Groundeffected that’s disappointing because who doesn’t secretly want to convert things that were never meant to be RC to something that is RC. Keep at it. I’ll share to my wife because she needs to know about this.
This is crazy. You are a mad inventor and I love it. Great job
@Groundeffected
3 ай бұрын
I love tinkering.
Nice work .
I look forward to these videos! Keep it up brother.
@Groundeffected
3 ай бұрын
Thank dude.
love it mate