Dan uploads the best tech content. (Please let my family go)

@DanKamYouKnow

10 ай бұрын

👀👀👀

@amb_13

9 ай бұрын

😂😂😂

@beanspud1623

3 ай бұрын

What?

@nameisnate2000

3 ай бұрын

​@@DanKamYouKnow why do you have 6 eyes 👀

@gabel.3579

3 ай бұрын

@@nameisnate2000they are everywhere

I literally just made the decision to change to this case thanks to this video!!! Havent started the work yet but I am so happy with the case and cant wait to get started!

@DanKamYouKnow

10 ай бұрын

Congrats! It’s a really fun and easy case to build in, lots of room. I just ordered a vertical GPU mount that I’ll be installing next week. I will hopefully drop that video next weekend if you’re interested in that process 🤝

@ohgodhelp.

10 ай бұрын

@@DanKamYouKnow Ill for sure be watching that!!

@justanotherfng556

2 ай бұрын

I just got this case and got my new setup put together. Sadly a repair shop has it now because there's no display when you turn it on. I7-14700f 2x32gig trident ddr5 sticks and a 4060ti 16gb. Can't wait till it's up and running. Yours is so much cleaner then mine is though. I'm terms of cables​@@DanKamYouKnow

I honestly took inspiration from your videos to start upgrading my own setup from scratch. Just recently ordered the H9 Flow and a Kraken elite and also the Lian Li fans (mostly because it looks super easy to use). The most expensive parts are still on hold, but it will definitely worth it :D

Dan the cable management man💪 looks unreal 🔥

@DanKamYouKnow

10 ай бұрын

My man 🤝🤝🤝🤝

Lovely build ! I have the h5 flow myself and it’s a vibe.

This is one of the cleanest builds ive seen

I been missing out 😢 keep the grinding

@DanKamYouKnow

10 ай бұрын

Good to see you Luis! Hope all is well. You’re still rockin’ that same PFP too!

I just built my first computer using the NZXT Elite. Super satisfied, and still kinda in disbelief I did it. No problems with temps because of the AIO and ten fans. I did mount the AIO on the side though because I wanted to see the RGB through the top glass. She looks beautiful. I love this case.

Looks awesome dude, this case was in my sights but opted for the lian li vision. either way beautiful build buddy.

Only 9 months later, and it still looks a sick build! I have just purchased this as an upgrade from the H510 Elite (Terrible airflow) thinking it was going to just be a nice case change... oh no, need new PSU to handle all the extra fans, going to change the fans as the NZXT have went backwards with the FAN connectors and now a 360mm NZXT Kraken series AIO cooler. Wish me luck 🤣

Love the case, getting it for my bday

I really love the way you do your videos!! The way you go into detail and show the little intricacies of the case (like the mirror on the inside) is really nice to see. No useless money shots or overedited scenes to generate clicks. Just a really honest view of the build youre doing. Youre the best ❤

@DanKamYouKnow

7 ай бұрын

Thank you so much!! I appreciate that, more than you know. 🤝

Looks good, I was considering the H9 but went with an EVO in harbor grey in the end for an upcoming build.

@DanKamYouKnow

10 ай бұрын

Great choice! Love those cases.

Absolutely love the vid! ❤ (my family is starving and I miss them. Please let them out)

I'm in love with this!!!

@DanKamYouKnow

9 ай бұрын

😎❤👍

The build looks really cool. If you wanted closer to neutral pressure you could decrease the rpm of the 6 intake fans relative to the 4 exhaust fans.

@Hartley94

10 ай бұрын

💡

@DanKamYouKnow

10 ай бұрын

Thanks Kanive! Positive pressure is usually more ideal for temps and they’ve been great so far. I usually keep them all at around 900-1000 RPM, up until about 60c, where they slowly ramp up and up. Good blend of quietness and performance.

@DatHondaBoi223

2 ай бұрын

@@DanKamYouKnowdo you use bios for fan control?

Awesome guitar man

@DanKamYouKnow

10 ай бұрын

Thanks! I love my USA Fender Strat ❤️

LOVE YOUR VIDEOS

Im in the same boat as you, got my h9 flow, wanted to add NZXT rgb fans but they make no financial sense, they require 2 controllers and the wiring is a nightmare compared to the lian li infinities.. looks amazing and thanks for giving me a tour before i make the jump with the fans! Just a heads up that lian li does do the infinites with a reversed blade. So you can have the infinity mirror showing even with intakes.

@DanKamYouKnow

10 ай бұрын

Yeah, the one cable per fan group is the way to go. Easiest cable management there is with this many fans. Only thing that sucks is the Lian Li software makes my PC idle much higher than normal, so I have to make sure I turn it off after it boots and loads my profile. The reverse Infinity fans look cool, I don’t think I can spend another $200 to get the 6 I need for intake though 😭😩.

@DatHondaBoi223

2 ай бұрын

If you can find the reverse blades in stock anywhere 🙄🙄 I found an Amazon listing, tried to order some before Christmas and they never shipped after 2 months so cancelled. About 2 months ago I saw they had reviews of people actually receiving them again so decided to try it again, it’s been 2 weeks, still not shipped again lol. Idk where else to get them as the nearest microcenter is 5 hours away from me

Great video, thanks. Only just purchased the NZXT H9 Flow in preference to HYTE Y90. The latter, not as thermally efficient and if I had gone with the Y90, my vertically mounted GPU would be right up against the glass. My system will be based on the AM5/Ryzen 78003XD. AIO is 280mm Bequiet and supporting case fans also Bequiet 120mm fans. I will go along with the exhaust 3 case coolers for the side panel but since my GPU is vertically mounted, I think it would be better to place the intake at the base (3 fans), because there's no obstruction from the GPU and the cooler air would push up the warmer air upwards into AIO 280mm exhaust fans top of the case and side exhaust fan 120mm. I may opt to change to your setup if I'm not getting the desired outcomes :)

It was a matter of time for NZXT to catch up on this desing. It's funny because when I saw this case launch, I inmediately remembered your build on the HYTE, I guess it was memorable because I saw it first in your channel. It sucks that there's no stock on the GPU bracket, that's one downside from NZXT, they never seem to have stock on a lot of products.

@DanKamYouKnow

10 ай бұрын

Yeah, their availability for products is bad. Don’t know why they don’t up their manufacturing process, like you said, everything is always out of stock. I miss my Hyte Y60 build, really fun case to build in.

Have been enjoying your shorts for awhile. Just today, I was wishing I could subscribe to you and bazinga, found this video.

This build is awesome man! if you want a sleek board, try the NZXT board. i love the way it looks in my case.

@DanKamYouKnow

10 ай бұрын

Dude! NZXT boards look so clean, and I love your build Nate. I believe they only make a B 550 I believe, while I currently have an X570. For aesthetics, the NZXT would be so clean.

Can you do a review or overview on your keyboard? It’s so nice!

This case looks awesome I’ve been debating on getting it myself but how is the noise levels though is it relatively quiet? Awesome video again!

@DanKamYouKnow

8 ай бұрын

With a bit lower fan curves, honestly not that bad at all. Depends on which fans you’re running but acoustics are pretty good

After watching the ease of installation and how good the H9 looked, I literally just cancelled by order for an H6. Was worried my 360 aio wont fit as an exhaust (top), and that the GPU power connector would hit the glass, with the H6. Thank you very much for your H9 review (including the vertical mount workaround suggestion). I just subscribed for thanks (and and to see how the H9 vertical mount looks). Affiliated links to the case and vertical GPU kilt please.

@DanKamYouKnow

4 күн бұрын

Thanks so much for the comment! While I have not done a build in the H6, I really enjoyed building in the H9 Flow. Used that build for almost a year until recently. Here is my affiliate link to the case: amzn.to/4c0iyZA And I highly recommend using the NZXT vertical GPU kit: amzn.to/452OnhQ I did a video where I installed the Cooler Master vertical GPU mounting kit, and it worked fine. But the NZXT vertical kit is more of a perfect fit for the case (because it’s made by NZXT). And thanks for the sub! I appreciate it.

@MidnightMan1961

3 күн бұрын

@@DanKamYouKnow case ordered from provided Amazon link above just now, but going with the coolermaster in you installation video which looked fine and saves $50 over the NZXT version which has a two weeks shipping time from Amazon Japan-lol atm).

I really hope evga start making gpus again. The ftw3 is just riddled with rgb and i love it.

bro this is insane looks sooo clean

@DanKamYouKnow

10 ай бұрын

Appreciate you Adyan

It looks super cool

@DanKamYouKnow

7 ай бұрын

Thank you!! Appreciate it.

Might be a little late but I have to ask since the build in planning right now is almost identical. In the part list you provided in the description you typed ( x4 / 3-pack ) does that mean that I should buy 4 units of the 3 pack fans? And isn’t the rear fan different? And if I do buy the 4 units of 3, wouldn’t that mean I would have 2 fans left over?

A new upload, a happy me

@DanKamYouKnow

10 ай бұрын

Appreciate the support, as always my friend 🤝

I like the aesthetics of this build, but personally I prefer classic format. GL

Love your build, the fans look AMAZING. Do you have additional comments now on the GPU temperature? I'm interested in upgrading my Cooler Master H500P Mesh into this case and I'd be happy to hear your opinion (do you recommend any alternatives?)

@DanKamYouKnow

7 ай бұрын

Shortly after making this video, I changed the GPU orientation to vertical (I made a video for it), but even set as vertical, the GPU temps are fine, even with a warm running card. The Phanteks NV-5, NV-7, and Liam Li Dynamic XL are all very comparable and better than the H9 Flow in some areas.

Very nice!

@DanKamYouKnow

7 ай бұрын

Thanks Robert!

It looks amazing! I'm doing the same build this weekend. I'll just be using NZXT fans and a vertical GPU mount. The only thing that I'm a bit unsure about is the position of the radiator (NZXT Kraken Elite 360 RGB). I'll have it as exhaust in the top or as intake in the side (push/pull). What would be better?

@DanKamYouKnow

9 ай бұрын

Thanks! I have been running the 360mm AIO on top, which works just fine, but I’m curious as to whether a push/pull intake setup on the side would be more beneficial. I’ve had better luck with the side mounted intake on other cases, so I wonder if it works better for the H9 Flow. I will have to try this in the future.

5 thousand dollar setup is crazy

Awesome build. I would like to ask if the tempered glass is tinted? I am hoping that it is not(like on the white version) so that it'll have max viewing. I am also planning to put a figure in front and I can't decide what is the best color to get. White or black... Hoping to get your inputs. Thanks

@DanKamYouKnow

7 ай бұрын

Thanks! The glass is slightly tinted on the black H9 Flow. With a little bit of RGB, you can clearly see all the components though, depends on the lighting you are going for. I do love white builds, but I feel like you have to fully commit to all white components for it to look really good. Some black and white setups do look good though. I normally always lean towards black, but that’s personal preference

Gonna be ordering this fan would you let me know how what order your fan sync is with the controller for the infinity mirror fans please ps love how your pc came out 🔥

looks good, bro...

@DanKamYouKnow

9 ай бұрын

Thank you ❤️

Which one do you prefer? Hyte Y40 or nzxt h9 flow? And great content❤❤❤

I am Japanese.I'm sorry if it's unnatural because it's an English translation. Coincidentally, the configuration is exactly the same as the PC I'm trying to make. As a result of wondering whether it was black or white, it seems that it was the correct answer to order a black case and fan. The uniform white color of the lights shows your good taste. Although it is a mirror fan, it is recommended because the reverse rotation version came out.

@DanKamYouKnow

9 ай бұрын

Hello! Correct, for this color combination, you will want a black case and black fans. I use the Lian Li software to make my fans white.

I have this PC Case too Bruh :D That's a Really so good :)

Having trouble fitting my single exhaust fan in place. You seem to have popped it in there quite easily. Do I need a bit more dad strength or am I missing something ?

Love the PC and all, but I gotta know.... where'd you get that lazy Susan you're using to spin the case around?

I have the same case the front panel can be removed by the screws there are screws on the bottom of the case. side, and top to take it off. Also the elite version only has glass on top but the temp difference is minimal with proper fan setup. (1-3 C). You can side mount the rad and have 6 fans on it for better cooling as well. And the y40 is hotter cause the gpu is next to the glass which causes it be hotter. The cooler master vertical v3 vertical mount works with the case. The nzxt is impossible to get atm. With a vertical mount the gpu is 2-10 C more depending on your room conditions and the gpu. You can remove the plastic cover if you want on the cable management thing.

@DanKamYouKnow

10 ай бұрын

Thanks for that. I should have specified more on the Elite version. How do you like the case and what build do you have?

@kenpi1365

10 ай бұрын

@@DanKamYouKnow The case is awesome imo plenty of space for future gpus. My core specs are i9 13900k with the z73 and a 3090 ti by evga. (rip). The rad has 6 fans in push and pull on the side of the case. I compared the side and top, the side was better for temps. I would have upgraded to the 4090 but with the way current games are I'm just not finding the want or need to upgrade. I play at 4k but the 3090 ti gets enough fps for me. I have the vertical mount by cooler master it's nice but the higher temps are noticeable compared to horizontal mount gpu. EVGA claims that the shroud is supposed to be designed for vertical mount. However, in the case of the 3090 ti not great cause the memory modules on the backplate. I have 10 lian li al 120 v2 in my case. I also debated between the flow and elite got both but ended up with the elite. The flow did have better temps but only by like 2 C on cinebench r23. The elite also comes with 3 duo fans which have rgb on both sides of the fan and a controller which retail value is worth it but if you don't use nzxt fans then not really. I at first used nzxt fans but the cables were way too much so I went lian li. So that value was lost lol the controller only works with nzxt products. I also have lian li strimmer cables which is why I got rid of the plastic cover. I didn't care about cable management and shoved everything at the bottom tho lol

@DanKamYouKnow

10 ай бұрын

I might have to try a push pull with the rad on the side, that would be a fun little experiment to try out. Honestly, EVGA’s departure from the GPU space is such a bummer, there isn’t any other cards on the market that I like, as far as looks go. I’ll probably stick with my 3080 until I decide to go 4K. For now, I am pushing 2 1440p / 144hz monitors ( one is an ultra wide ) and the 3080 does just fine, so it’s staying for a bit.

Lianli Sl120 Infinity reverse blade looks amazing much better compare with your variant.

@DanKamYouKnow

9 ай бұрын

They do look good but I already owned these before the reverse ones came out. Not sure I want to spend another $200 for them, maybe one day

Man I have a decent build but when I get enough money I'm going for this exact build

Did you need a fan hub for the Lian Li fans if so what did you get?

why the 30 series.. I can't recall. Was the 40 Super series now out then?

Beatiful

Did you manage to close the case with the RTX 3090 or was it tight because of the power cable?

@DanKamYouKnow

9 ай бұрын

I had no issue with closing my side panel. It’s close but fits fine.

just thinking about to switch from the h7 flow to the h9 flow bc im running a matt black build rn and i want a rgb build now XD

Congrats.

@DanKamYouKnow

10 ай бұрын

🤝🤝🤝🤝🤝🤝🤝

@Hartley94

10 ай бұрын

@@DanKamYouKnow After Thanks for watching, I've been thinking "damn that's an awesome case". BTW which headlamp is that 🙏?

@DanKamYouKnow

10 ай бұрын

Thanks! The headlamp is a Streamlight Bandit Pro. I used to use them all the time when I was a auto technician for Toyota. Now I use them for pretty much any project. Rechargeable, non bulky, and pretty cheap too: amzn.to/3Q7vbKp

@Hartley94

10 ай бұрын

@@DanKamYouKnow Thanks, about the liquid cooler. Does it raise the temperature in your office easily?

@DanKamYouKnow

10 ай бұрын

Even though it’s the same amount of heat output as an air cooler, I do feel like a radiator heats up a room faster than an air cooled PC.

What are the fans called? Love their rgb

How would you suggest a pc buisiness?

Bro, I'm your well-wisher from Bangladesh. I have a question, Where did you find these NZXT velcro cables that you used in the Water pump? Thanks!

@DanKamYouKnow

7 ай бұрын

They came with my NZXT AIO. It’s the Kraken Z73 360mm AIO

@explainercamp6073

7 ай бұрын

@@DanKamYouKnow Thank you for your reply and information :)

LETS GOOOOOOOO

@DanKamYouKnow

10 ай бұрын

LFGOOOOOOO

do you think its necessary to add 3 fans to the bottom? I'm going to use this case for my 4090 build.

@DanKamYouKnow

6 ай бұрын

Yes, the more airflow to the GPU, the better 👍🏻

Kratos making pcs before gta 6 😂

question, does the elite version come with RGB FANS?

I have ordered the h9 elite version, according to you how much temperature difference can be expected due to the top glass panel?

@Malenia_BOM

Ай бұрын

You should’ve skipped on the elite one 😅

Quick question, the fans hub comes included? or i have to buy one. Im adding everything to the cart in amazon so i dont want to forget if i need that hub

@DanKamYouKnow

9 ай бұрын

Nope, the fan controller I’m using came with my fans. No hub included

@DamingeRAdventure

9 ай бұрын

Name of the hub? or any recomendation?

@DanKamYouKnow

9 ай бұрын

My fans are the Lian Li Infinity fans, and the 3 pack comes with the controller to power them and multiple other Lian Li Infinity fans: amzn.to/3qnCJye For other fan controllers, I like the Corsair hub: amzn.to/3YuETsy And the Thermaltake one: amzn.to/3qsKKSz Depends on the number of fans you have and if they’re RGB or not. You can also utilize the fan headers on your motherboard too, and those headers can be y-split to power 2 fans per header: amzn.to/3qfqVOI

@DamingeRAdventure

9 ай бұрын

@@DanKamYouKnow Really thanks for the info, im going to use th H9 case too with 360 radiator so im using 10 fans and the fans im buying the Corsair iCUE AF120 RGB Elite 120mm Triple Fan Kit in the description says it have like an Icue controller thing, but there is no images about it i dont know if that is some type of hub

i have the h9 flow too, but in white😀

@DanKamYouKnow

3 ай бұрын

😎🤝😎

I have same case bro, nzxt H9 flow What should be the correct air flow in the case?

@DanKamYouKnow

5 ай бұрын

Bottom and the side fans should be intake. The rear fan and top fans should be exhaust.

i reccomend buy the gb - 001 anti sag braacket from lian li, it works very well and is hidden

@DanKamYouKnow

9 ай бұрын

That’s a clean looking bracket. I ended up going with a vertical mount actually, and made a video about it 👍🏻

Why did you go for the nzxt kraken with Lian Li fans instead of using the Lian Li GALAHAD II 360 with inf fans?

@DanKamYouKnow

9 ай бұрын

That AIO doesn’t have an LCD screen like the Kraken does.

@AtanEngessa

9 ай бұрын

@@DanKamYouKnow ah that's what I thought. Thnx or the reply! I'm going for almost the exact same build but with the GALAHAD II instead of the NZXT. Can't bring myself to spending so much more for just an LCD screen. Fantastic looking build and great explanation. Can't wait to start my build. Subbed because of the very clear and chill content.

@DanKamYouKnow

9 ай бұрын

Appreciate it! I like the Galahad II a lot, because you can swap out the pump heads for different looks. When I bought my Kraken AIO, I don’t think the Galahad II was out yet, not sure. Sounds like you’ll have an awesome build! Appreciate the sub my friend 🤝

Should I get a PWM header for fans with this case ? or is there one provided?

@DanKamYouKnow

8 ай бұрын

There is no controller included. You’ll probably need to use a controller as power this many fans may be difficult with motherboard headers.

how's the temps?

Hey man did you install any standoffs or is the case ready to go

@DanKamYouKnow

10 ай бұрын

It’s ready to go for ATX motherboards. You’ll use the included stand-off wrench to move the bottom standoffs for M-ATX and ITX

@bencorolla444

10 ай бұрын

@@DanKamYouKnow thank you sorry for asking a question that you anwsered less than 1 minute later

@DanKamYouKnow

10 ай бұрын

No worries 🤝🤝🤝

wait so u can change the nzxt watercooling’s fans to lian li right?

@ItsOmarEdits

2 ай бұрын

Yes

First person I heard that said the cable management is bad/horrible in this case.

How long is that anti-sag GPU stand?

@DanKamYouKnow

10 ай бұрын

It goes from 74mm to 120mm. It’s linked in the description

What desk is that? The tabletop is beautiful

@DanKamYouKnow

9 ай бұрын

Thanks! It’s the IKEA KARLBY 98” kitchen counter top. It’s Walnut/Veneer, very nice cut of wood and craftsmanship

@doctorqwerty

9 ай бұрын

@@DanKamYouKnow oh wow! I didn't realize how big it was in the video!

@DanKamYouKnow

9 ай бұрын

It’s definitely a chonker

Did you put lian li fans on the Nzxt aio?

@DanKamYouKnow

9 ай бұрын

Yup, all the case fans and the radiator fans are Lian Li Infinity 120’s

Is there a reason u didnt go with the nzxt duo rgb fans?

@DanKamYouKnow

10 ай бұрын

I already had the Lian Li fans before this build, and I like the look of the Infinity fans, more than the NZXT ones. 👍🏻

Will a corsair 12VHPWR cable be long enough for this case? It's 60 cm

@a-animal1206

9 сағат бұрын

Yes I use it right now

whats the radiator

why u sayed in description that theres only x2 crucial balistix 16 gb ram, but you placed 4

Price Sir?

cool

do you have a picture with the panel side on?

@DanKamYouKnow

6 ай бұрын

On my Instagram, yes. I left the panel off for the video because it creates a lot of reflections with the glass.

Would have bought this case if it was in stock when I was looking for a new case. I ended up buying a Phanteks G500A, pretty cool case too, look it up. What is this cpu cooler you got Dan ? looks nice

@DanKamYouKnow

10 ай бұрын

Yeah, the availability for this case is horrible. They should have known that it was going to sell out fast. G500a is a cool case 👍🏻 I’m using the NZXT Z73 AIO: amzn.to/3Kc2NmO A bit expensive but really nice, screen is customizable to show pretty much anything.

@regisdolci3324

10 ай бұрын

@DanKamYouKnow I love the temp feature on the AIO cooler. I just wish this feature was available on airflow coolers. Honestly, I think they can improve airflow coolers much more. The design is basically the same used for all, with zero innovation to it. Lazy engineers.

@DanKamYouKnow

10 ай бұрын

On Air coolers? I believe DeepCool makes an attachment for their Ak620 or whatever it’s called, that‘ has a screen on it. It came out very recently

what did u do with the y40 after?

@DanKamYouKnow

7 ай бұрын

It went back in the box. I will probably sell it locally, because I don’t think I’ll use it again.

is fans have noise. i have this case with lian li fans - 4090 i9 14900k. theres some noises

@DanKamYouKnow

4 ай бұрын

With the proper fan curves, the noise level isn’t bad. It’s worth the trade off for the best RGB

awww Fred is so handsome

@DanKamYouKnow

9 ай бұрын

❤ My little handsome boy

Not to be rude but how much is this and is it practical?

@FaiyazNur7503

28 күн бұрын

I wanna know too

Is this the best fan config?

@DanKamYouKnow

9 ай бұрын

Yes, I have a good amount of positive pressure ( 6 intake to 4 exhaust ) and temps have been great. The only other way I can think that may work better is a 360mm AIO, side mounted as intake. Possibly a push pull configuration as well. I honestly may try that in another video soon and see what happens.

look for a evga ftw3 3090 ti

Psu is just behind the processor any temperature issu from psu to processor

@DanKamYouKnow

9 ай бұрын

Nah, temps have been extremely solid

Can u even change ur pc fans speed ? I bough a pc come with its fans and hub but they so could ans ima able to change their speed cuz they weren’t connected to the mobo gg

did you buy the pc 2

@DanKamYouKnow

3 ай бұрын

👀👀👀👀👀👀👀👀👀👀

So I can use a msi 3060 with that board and cpu?

@DanKamYouKnow

10 ай бұрын

Hey Reggie! Good to see you. Yes, you definitely can. I’d jump up to a 3060Ti though, one of the better price to performance cards out there, unless you already have the MSI 3060 that is

@reggiedabodyguard1986

10 ай бұрын

@DanKamYouKnow had stepped away for a Lil bit.. I did a good deed and helped out a friend in need so I gave up my PC..now I'm starting over.. I been eyeing the ti version

@DanKamYouKnow

10 ай бұрын

That’s very nice of you. For that price range, the 3060Ti is definitely the way to go. Great card

@reggiedabodyguard1986

10 ай бұрын

@DanKamYouKnow I'm going with this case and fans.. once I'm setup I'll post in the discord

@reggiedabodyguard1986

9 ай бұрын

Are the 9 fans hooked up to one controller?

Damn. Despite looking good, NZXT is a bit too Pricey for me. ...well, actually, nah, considering the Aorus Parts I just bought the last year (ATC800, C500 Case, 1200w PSU) that costs me about 600 Euros just for those 3... Yeah no, NZXT would be more affordable. But hey, my list with the most Expensive parts are done. Except a 300€ CPU, my Planned Aorus MB for 188€ and Aorus DDR5 ram 3200mhz for 141€ are actually Affordable - at least I believe that.

cute kitty

@DanKamYouKnow

7 ай бұрын

🐈‍⬛🐈‍⬛🐈‍⬛

Для чого ставити CPU охолодження на верх видув, де логіка..??

@DanKamYouKnow

4 ай бұрын

Радіатор для процесора повинен бути зверху, там його найкраще поставити...

@wildbroll

4 ай бұрын

@@DanKamYouKnow фізика каже, що гаряче повітря йде вверх, а GPU найгарячіше в корпусі...)логічніше поставити на бокову кришку корпусу на видув...

@DanKamYouKnow

4 ай бұрын

@@wildbroll Порівняйте обидва з них і подивіться, що вам найкраще підходить. Встановлений зверху радіатор, встановлений як вихлоп, чудово працює для охолодження процесора. Радіатор, встановлений збоку, також працює добре.

I bought everything in white, when I see the black build, I think I made a wrong decision 😢

@DanKamYouKnow

3 ай бұрын

I think both look great! But I always tend to stick to black builds. I think it really depends on the rest of the set up though

Dan what up

@DanKamYouKnow

10 ай бұрын

Mr. Demon. How do you do?

@Demon_232

10 ай бұрын

@@DanKamYouKnow good

@DanKamYouKnow

10 ай бұрын

@@Demon_232 Wonderful

I personally think it would be a crime to put any thing other than a ATX motherboard in this case

The first pc is too good for a pc2 to need to be released

i can build that myself for less than half the price (without fans)