I Start my Engine for the First Time || The 300Hp Volvo Redblock Build || Part 4
Автокөліктер мен көлік құралдары
Will the Volvo Start ? Exiting to start the car for the first time after the rebuild and upgrade of the Volvo Redblock B230fk engine, how it will run? Turns out we might have a little bit more work ahead of us before this ting runs smooth. This is part 4 of the Build, there may be a couple of more episodes left before we get back to the Volvo 740 T5 Engine Swap.
-----------------------------------------------------------------------------------------------------------------------
Disclaimer:
Due to factors beyond the control of BackmansGarage, I cannot guarantee against improper use or unauthorized modifications of this information. BackmansGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BackmansGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BackmansGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackmansGarage.
Пікірлер: 60
That first startup was epically perfect. Quick start and runs smooth. Nicely done.
@BackmansGarage
Жыл бұрын
Thanks 👍
@henrychapman3798
6 ай бұрын
@@BackmansGaragev
I can see you put a lot of effort and talent into the editing, certainly does not go unnoticed.
I'm currently collecting the parts to do the exact same engine rebuild. Just watched the entire series, and probably will while rebuilding it as well. Thank you for these detailed videos! You've got yourself a new sub. Greetings from Holland
@BackmansGarage
Жыл бұрын
Thank you for watching and finding it useful 😀👍
Very good work for amazing driver's pleasure. Congratulations from 940turbo owner!
Nice job, looking forward to the next episode 👍
really cool video series. love the way you calmly explain the different parts and aspects of building an engine
love this series!!
Great video really enjoyed this! Wish my 940 engine looked so nice aha
Thank you so much for these videos. I'm going for my first engine swap going from a B21F to a B230FT I'm tearing down now, these high quality videos will be watched over and over. Feeling so overwhelmed but this helps a ton!
@BackmansGarage
Жыл бұрын
Thansk you for finding it useful :) and good luck with your project. 👍
Your content has helped me a lot. been a massive volvo fan for years, got my own transport company en got som newer volvo's but more recently been digging in to a 940 turbo en starting a NA 240 b230f build for cruissin. your videos has helped me out a lot from the smal maintance to the bigger how to's so thanks en keep it up 👍
Congrats
Dont worry. 500 Km and its sound will be smooth
Oh yeah starts right up
Great video. Hopefully you can get the engine running as smooth as you want.
@BackmansGarage
Жыл бұрын
Thanks! Yeah, I have never been satisfied with how this engine has run since I bought it. I really thought this would fix that, among other things, but I guess it's an electrical issue, maybe. 😄
yeah man!
Kul att se, det här skulle jag vilja göra med min med 👌
Thanks for the great video series. Hope to see more. One note, the round belt cam and aux shaft gears have different backspacing. Just ran into this one that the belt wasn't tracking right one. They have different 3-digit part numbers stamped on the 'spokes'.
@BackmansGarage
Жыл бұрын
Oh really? Thats news for me. 😄 So this is just for the roundtooth and not for the square ones? Thanks, will look into this 👍
@ColePeacock-iy6js
Жыл бұрын
@@BackmansGarage Yes, round tooth only. The cam gear should have 032 stamped on it. The aux shaft gear 751. My engine had 2 aux gears and the belt was riding on the front edge of the gear. There is a 2mm difference in backspacing between the 2.
@BackmansGarage
Жыл бұрын
Thanks. I will mention this in a future video 👍
Flot arbejde Du er virkelig god til at fortælle og for klar hvad du gør fantastisk
@BackmansGarage
Жыл бұрын
Tackar 👍
Oh the seatbelt clicking noise. You make me wanna buy a volvo again
@BackmansGarage
5 ай бұрын
It the best sound 😄
If they are stock pulleys, the cam pulley is slightly taller than the aux shaft pulley, as in the teeth are spaced out slightly further from the pulley mating surface.
@BackmansGarage
Жыл бұрын
Yes, i have gotten a comment on this earlier. Will make sure to include that in an upcoming video👍
Mycket intresanta videor! bra förklaringar och shyssta vinklar! Såg på din tiktok att du hade problem med en trasig bränslebox! gör gärna en video om det i framtiden!
Perfectly done! How many hours did you invest to work it all over?
Wish I could be there to help put it back together. But, my days of staying up all night to finish a project are long behind me.
Heck yeah, lookin good. Not a fan of the wrinkle black engine bay though. What ya doin for exhaust system? She sounds pretty quiet! 🤙
@BackmansGarage
Жыл бұрын
The wrinkle paint it actually bedliner with sand in it 😄 4Kg worth. The valvetrain is ded quiet when the hood is closed 👍 Not everybody's cup of tea but I'm looking to use it on the exterior as well 😃.
Good work! Are you sticking with the original ECU or willl you use aftermarket engine management?
@BackmansGarage
Жыл бұрын
Not entirely sure atm 😄
Excellent work, has the Swedish government set a date for the phase-out of IC engines?
@BackmansGarage
Жыл бұрын
Thanks. I have no idea, the Swedish government don't know left from right. It's like being on a ship without a rudder...
@ricksampson6780
Жыл бұрын
@@BackmansGarage Likewise in Australia, cheers.
What brand torque wrenches do you use? I'm planning to do engine rebuild too and I can't deside wich ones to buy. Your videos are great, and as finnish person I like that I can easily undestand your speech, because you articulate kind like us.
@BackmansGarage
Жыл бұрын
Thanks :) The wrenches are basically a no name brand from Verktygsboden. They come with a calibration chart and certificate but its nothing i would recommend unless you are on a somewhat tight budget. Looks like they dont sell the same model anymore, but its something along these lines :) verktygsboden.se/hand-elverktyg/handverktyg/hylsverktyg/momentnycklar/momentnyckel-38-20-100nm?att=TW9tZW50bnlja2VsIDMvOCwgMjAtMTAwTm0=
and next question is what the number of torque bearing nuts and cylinder head of B230f 1990 thanks for your answer
@BackmansGarage
Жыл бұрын
Their should be a a letter with specs that goes with your head gasket of choice 👍
Is there a particular reason you went with a SOHC instead of DOHC like the B234?
@BackmansGarage
5 ай бұрын
The b234f is not a b230fk, this is just not an engine swap build 🙂 And if you want my opinion I think the 8v is better than the 16v anyways :)
Obeskrivbar känsla!
@BackmansGarage
Жыл бұрын
Joo, blev lite putt där först men det löste sig ju ganska fort👍
hello .at the end why returqued cylinder head ?
@BackmansGarage
Жыл бұрын
Because it settles after a heat cycle 👍
at what point do you set the timing?
@BackmansGarage
Жыл бұрын
The timing is set by the ECU and is not adjustable mechanically. Thanks.
I'd like to know more about the random shoe on the floor in the background 😅
@BackmansGarage
Жыл бұрын
You are gonna need to provide me with a timestamp :D
Vad är det för produkt du har målat motorrummet med? :)
@BackmansGarage
Жыл бұрын
Raptor, ska se om jag kan göra en sammanställning om allt i någon video 😄
what rims are on the car?
@BackmansGarage
Жыл бұрын
Some 80's rial wheels, cant remember right now. Think they are stamped 1986 👍