Great video. That U-bend rise with the water was really smart. I never would have thought of that
@DrLootCrate
2 ай бұрын
Thanks man. It took a little experimenting to get it right but is definitely a lot simpler than some of the other solutions
@chrissmith486 Жыл бұрын
Your one-click factories are SO elegant. Love it!
@DrLootCrate
Жыл бұрын
Thanks Chris. Not sure I have ever been referred to as elegant in any context, so I will definitely take it!
@rickmidkiff9990 Жыл бұрын
I just finished using this BP. Awesome is the only word to use here. I already have a 360 PPM and it takes up at least 5 times the space this does. Thanks Doc
@DrLootCrate
Жыл бұрын
Yes Rick! that is what I like to hear. I am looking forward to breaking this one out myself in a factory sometime soon.
@Ethanftl Жыл бұрын
This video comes in clutch just for all the tips and tricks alone 🙌
@DrLootCrate
Жыл бұрын
I like to sprinkle some gems in there for all those listening closely. Glad you liked it Etoh
@NicholasBoll Жыл бұрын
This video gave me new tips and I made a version with no alternate recipes and only ingots. The spacing is very tight and I needed a fluid buffer for the water output, but it is so nice to drop more to increase output! Thanks!
@nookschreier Жыл бұрын
My brain stopped working for a few seconds when you moved the coal lift TOWARDS the clipping and the splitter suddenly was out of the way... forehead slap when I watched again and you had turned around the output. DOH. Very well done.
@DrLootCrate
Жыл бұрын
haha. a little optical illusion for you. just making sure you were paying attention. Glad you liked the build!
@zackrth2768 Жыл бұрын
Amazing to even consider trying this, love these one click factories!
@DrLootCrate
Жыл бұрын
Glad you are loving it Zack! I am enjoying trying to figure it all out
@brodriguez11000
6 ай бұрын
BPs are handy twofold. Mass deletions per blueprint make factory deletion faster and easier. Regardless of what BP designer one uses (I use a mod) it makes BP design a drop in replacement. So upgrading a factory with constraints is a snap.
@Warp9pnt9 Жыл бұрын
Modified to use electrode alt. Underclock smelters to 100*5/6% (83.3333%). Put petroleum coke on the line rather than coal. Nearly identical.
@DrLootCrate
Жыл бұрын
Sounds good to me! I have never used that recipe (or any petroleum coke recipe) but I need to check it out
@Straale5015 ай бұрын
Well done!
@thekernelpanic3320 Жыл бұрын
awesome video! thx
@DrLootCrate
Жыл бұрын
Glad you like it Kernel!
@cubesteak411 Жыл бұрын
Wow, amazing... lol My spagett' just cannot compare! LOL - love it!
@DrLootCrate
Жыл бұрын
Thank you sir! You will get there, or maybe not, but that is ok. Sometime spaghetti can be fun
@gyruss2008 Жыл бұрын
I built this, but did have difficulty after placing the shunted foundations at 9:41 in the instructions, despite being really as precide as i could , it still gave me the error you mentioned so it wouldn't allow me to place the 2nd constructor, so i improvised, dropped 4 full foundations then placed it, then just deleted the full foundations, and placed the ones you mentioned afterward. Other than that, the factory seemed ok! When using the blueprint however, i did notice that on 1 or 2 of the conveyer lifts, despite it having snapped when building the blueprint, it has a gap between the top of the conveyer lift and the merger/splitter, i think this is currently a bug with blueprints as this has happened on some of my own. Nay bother tho, i just corrected it by replacing the conveyor lift to re-snap it.
@DrLootCrate
Жыл бұрын
Thanks for the detailed feedback. bummer that you couldn't quite find the same solution as me, but good improv! The bug in the conveyor lift appearance is very annoying, but it actually disappears the next time that you load the factory. So next time you save and restart it will look normal without doing anything
@kslstrike1980 Жыл бұрын
Oooh great🤩🤩 thats what i wanted
@DrLootCrate
Жыл бұрын
It is a good one. This will probably be the one mostly likely to get wide usage in my world
@timothygibson4596 Жыл бұрын
Under the current update of Satisfactory, you do not need the alternate recipes in your book. Modify a new save with the satisfactory calculator, make sure you allow all tiers so you have the blue print maker and all alternate recipes. With the blueprint maker you can set a constructor, assembler or whole setup involving the alt recipe, save it and make sure you move the plan plus it’s additional file to your blueprint folder in your current world. When you drop the plans the machines should retain its Alternate plan, I’ve done this with caterium boards and iron wire with no issue at all.
@DrLootCrate
Жыл бұрын
Good to know. I have them all unlocked so I had no idea what happens when somebody tries to use a blueprint with alt selected that they don’t have. But don’t your blueprints apply to every save? I don’t think there is another blueprint folder per save, but I guess I haven’t looked
@timothygibson4596
Жыл бұрын
@@DrLootCrate if you make multiple save files with a new game time, they are saved in the numbered/lettered folder for saves but each folder. for instances if you have unlocked the blueprint maker and made a print to save so the folder can be populated Correctly. If you preemptively make a blueprint folder in the save, you run the chance of bricking the save because it’s trying to access the folder it has created and can not locate it. It will try to make another folder and fail because the folder name already exists. But in a few words each save has its own individual blueprint folder.
@larsboevee9085 Жыл бұрын
What would happen if u would use a foundry instead of smelter unoverclocked foundry takes 30 less scraps and makes 30 more ingots when u place the max of both in a line facing forward, combined with the blender scrap recipe would this be more material efficient or would it not, thanks for your time of reading this.
@larsboevee9085
Жыл бұрын
The reason for the blender is less spa ce
@DrLootCrate
Жыл бұрын
Good question Lars. I am not sure you could fit that all in to one blueprint, but maybe I am wrong. The foundry recipe also calls for silica, so you would need to bring that in as well, which I like to avoid. Instant scrap (which is the blender recipe) uses more bauxite per scrap, so I tend to avoid it most of the time since bauxite is so rare. I do use it in my battery factory however as I can be more convenient
@TheCaptDude10 ай бұрын
Thanks!!
@DrLootCrate
10 ай бұрын
No prob. Glad you liked it
@TheCaptDude
10 ай бұрын
@@DrLootCrate It works so good! It is my first Blueprint.
@LiLBitsDK Жыл бұрын
23:42 whats that there in the middle of the foundation (center of image) seems like a conveyer lift going to nowhere?
@DrLootCrate
Жыл бұрын
Keen eye Jesper. There is a visual bug when you first put down blueprints with conveyor lifts. It basically puts a second one down going off to the side like the one you found. I am pretty sure that it goes away once you save and leave the game and come back. Something I hope they fix in the next update.
@LiLBitsDK
Жыл бұрын
@@DrLootCrate yeah I noticed it big time last night when I was making some blueprints myself, man that is annoying, but I also had a fair few belts that didn't work even thought they snapped on and beeped but once I placed it in the world it was no go, had to redo them... quite annoying... but blueprints are still a blessing :D made one for the fused modular frame at 1/min... it was crazy... it ain't one click since the blender doesn't fit but it is very little extra work and I just make the alu casings next to the HMF, quite handy and makes them so much easier to make now... used to hate those factories :D
@AmericanSuperman813 Жыл бұрын
What happens if you're building these, like you, with mark 5 belts/lifts and you go to rebuild it on a new save that has not unlocked the tier for mk5 belts?
@DrLootCrate
Жыл бұрын
It is a great question! I don’t really know, but I don’t think it will work. I dont think mk5s are really required here (don’t remember the actual numbers from making the video) for capacity
@MooseMan44
Жыл бұрын
@@DrLootCrate You are correct. Blueprints with higher level belts can't be used. I've started making all my blueprints with Mk3. Pretty easy to upgrade the transport lines in most factories when Mk4 & 5 are available. That way I can use them as soon as the Blueprint structure is unlocked.
@ravenousbasilisk51203 ай бұрын
My problem with aluminum factory is not complexity(not after being through heavy modular frame factory), but absence of a good spot with every resource needed for aluminum factory in close proximity(vertical and horizontal) .. except titan forest but it looks awful to build in
@bananenklops9738 Жыл бұрын
while watching this video I just got the sloppy aluminum recipe in my save :D
@DrLootCrate
Жыл бұрын
What a perfect coincidence!
@bananenklops9738
Жыл бұрын
@@DrLootCrate indeed! By the way, thank you very much for all of your satisfactory content!
@DrLootCrate
Жыл бұрын
@@bananenklops9738 thank you for watching! Glad you are liking the vids
@Kontrax04 Жыл бұрын
Got very big problems when using Blueprints already made in the BP Generator. Your first step (insert 2m foundation) is already the nail in the coffin. Click on save and count to 10. Puff, game crashes and restarts 5 mins ago. Can´t save Blueprints which use blueprints in it self (reproduced it, even with only 1 foundation as a BP, already looked it up in the forums. is unsolved :-/ ) But thanks for the great tutorial! love your guides = )!
@DrLootCrate
Жыл бұрын
Wow, that is pretty annoying! I have never run into that at all, but sorry that you did. Glad you are liking the vids. There are plenty more on the way!
@LiLBitsDK
Жыл бұрын
just load the 4x4 blueprint and rename and save it as the new one
@timothygibson4596
Жыл бұрын
Delete your blueprints folder if it’s created then make a new blueprint then save
@LiLBitsDK
Жыл бұрын
@@timothygibson4596 no need for that just don't "build" blueprints inside blueprints... LOAD them ;-)
@timothygibson4596
Жыл бұрын
@@LiLBitsDK I don't think you follow the advice or if it was aimed at humor I didn't get it, the easiest fix when my game crashed because of blueprints was to delete the blueprint folder (backing up my blueprints) and reintroducing them when I recreated the folder in game with the maker.
@DatHondaBoi2233 күн бұрын
I can’t find the water Input an I just dumb lmao
@BabyJeus Жыл бұрын
Can you post the blueprint in satisfactory calculator?
@DrLootCrate
Жыл бұрын
Access to my blueprint files and save games are an exclusive benefit to my patreons. I like to give my biggest supporters something special. If you aren’t into that, no problem. Just follow along this free guide and knock it out yourself.
@brodriguez11000
6 ай бұрын
@@DrLootCrate Duplicated, although I had to move things on the smelter/constructor side forward a bit to make the beltwork work. Be nice if the designer had a block move.
@matthewwright57 Жыл бұрын
Copper Powder is OP
@DrLootCrate
Жыл бұрын
I am going to making a ton of that soon. I will starting my nuclear pasta build soon
@calitoosh455 ай бұрын
how is it hard to build aluminum? bru i just build like 180 alu sheets in 3 hours, not hard at all
@fritzcolburn9 ай бұрын
Alternate recipes... which you may or may not get... so these "how tos" are pretty much useless
@DrLootCrate
8 ай бұрын
Yeah I know. But it basically impossible to do this without alternates. After I already found them all manually the first playthrough, I just go unlock them on satisfactory calculator nowadays
Пікірлер: 64
Great video. That U-bend rise with the water was really smart. I never would have thought of that
@DrLootCrate
2 ай бұрын
Thanks man. It took a little experimenting to get it right but is definitely a lot simpler than some of the other solutions
Your one-click factories are SO elegant. Love it!
@DrLootCrate
Жыл бұрын
Thanks Chris. Not sure I have ever been referred to as elegant in any context, so I will definitely take it!
I just finished using this BP. Awesome is the only word to use here. I already have a 360 PPM and it takes up at least 5 times the space this does. Thanks Doc
@DrLootCrate
Жыл бұрын
Yes Rick! that is what I like to hear. I am looking forward to breaking this one out myself in a factory sometime soon.
This video comes in clutch just for all the tips and tricks alone 🙌
@DrLootCrate
Жыл бұрын
I like to sprinkle some gems in there for all those listening closely. Glad you liked it Etoh
This video gave me new tips and I made a version with no alternate recipes and only ingots. The spacing is very tight and I needed a fluid buffer for the water output, but it is so nice to drop more to increase output! Thanks!
My brain stopped working for a few seconds when you moved the coal lift TOWARDS the clipping and the splitter suddenly was out of the way... forehead slap when I watched again and you had turned around the output. DOH. Very well done.
@DrLootCrate
Жыл бұрын
haha. a little optical illusion for you. just making sure you were paying attention. Glad you liked the build!
Amazing to even consider trying this, love these one click factories!
@DrLootCrate
Жыл бұрын
Glad you are loving it Zack! I am enjoying trying to figure it all out
@brodriguez11000
6 ай бұрын
BPs are handy twofold. Mass deletions per blueprint make factory deletion faster and easier. Regardless of what BP designer one uses (I use a mod) it makes BP design a drop in replacement. So upgrading a factory with constraints is a snap.
Modified to use electrode alt. Underclock smelters to 100*5/6% (83.3333%). Put petroleum coke on the line rather than coal. Nearly identical.
@DrLootCrate
Жыл бұрын
Sounds good to me! I have never used that recipe (or any petroleum coke recipe) but I need to check it out
Well done!
awesome video! thx
@DrLootCrate
Жыл бұрын
Glad you like it Kernel!
Wow, amazing... lol My spagett' just cannot compare! LOL - love it!
@DrLootCrate
Жыл бұрын
Thank you sir! You will get there, or maybe not, but that is ok. Sometime spaghetti can be fun
I built this, but did have difficulty after placing the shunted foundations at 9:41 in the instructions, despite being really as precide as i could , it still gave me the error you mentioned so it wouldn't allow me to place the 2nd constructor, so i improvised, dropped 4 full foundations then placed it, then just deleted the full foundations, and placed the ones you mentioned afterward. Other than that, the factory seemed ok! When using the blueprint however, i did notice that on 1 or 2 of the conveyer lifts, despite it having snapped when building the blueprint, it has a gap between the top of the conveyer lift and the merger/splitter, i think this is currently a bug with blueprints as this has happened on some of my own. Nay bother tho, i just corrected it by replacing the conveyor lift to re-snap it.
@DrLootCrate
Жыл бұрын
Thanks for the detailed feedback. bummer that you couldn't quite find the same solution as me, but good improv! The bug in the conveyor lift appearance is very annoying, but it actually disappears the next time that you load the factory. So next time you save and restart it will look normal without doing anything
Oooh great🤩🤩 thats what i wanted
@DrLootCrate
Жыл бұрын
It is a good one. This will probably be the one mostly likely to get wide usage in my world
Under the current update of Satisfactory, you do not need the alternate recipes in your book. Modify a new save with the satisfactory calculator, make sure you allow all tiers so you have the blue print maker and all alternate recipes. With the blueprint maker you can set a constructor, assembler or whole setup involving the alt recipe, save it and make sure you move the plan plus it’s additional file to your blueprint folder in your current world. When you drop the plans the machines should retain its Alternate plan, I’ve done this with caterium boards and iron wire with no issue at all.
@DrLootCrate
Жыл бұрын
Good to know. I have them all unlocked so I had no idea what happens when somebody tries to use a blueprint with alt selected that they don’t have. But don’t your blueprints apply to every save? I don’t think there is another blueprint folder per save, but I guess I haven’t looked
@timothygibson4596
Жыл бұрын
@@DrLootCrate if you make multiple save files with a new game time, they are saved in the numbered/lettered folder for saves but each folder. for instances if you have unlocked the blueprint maker and made a print to save so the folder can be populated Correctly. If you preemptively make a blueprint folder in the save, you run the chance of bricking the save because it’s trying to access the folder it has created and can not locate it. It will try to make another folder and fail because the folder name already exists. But in a few words each save has its own individual blueprint folder.
What would happen if u would use a foundry instead of smelter unoverclocked foundry takes 30 less scraps and makes 30 more ingots when u place the max of both in a line facing forward, combined with the blender scrap recipe would this be more material efficient or would it not, thanks for your time of reading this.
@larsboevee9085
Жыл бұрын
The reason for the blender is less spa ce
@DrLootCrate
Жыл бұрын
Good question Lars. I am not sure you could fit that all in to one blueprint, but maybe I am wrong. The foundry recipe also calls for silica, so you would need to bring that in as well, which I like to avoid. Instant scrap (which is the blender recipe) uses more bauxite per scrap, so I tend to avoid it most of the time since bauxite is so rare. I do use it in my battery factory however as I can be more convenient
Thanks!!
@DrLootCrate
10 ай бұрын
No prob. Glad you liked it
@TheCaptDude
10 ай бұрын
@@DrLootCrate It works so good! It is my first Blueprint.
23:42 whats that there in the middle of the foundation (center of image) seems like a conveyer lift going to nowhere?
@DrLootCrate
Жыл бұрын
Keen eye Jesper. There is a visual bug when you first put down blueprints with conveyor lifts. It basically puts a second one down going off to the side like the one you found. I am pretty sure that it goes away once you save and leave the game and come back. Something I hope they fix in the next update.
@LiLBitsDK
Жыл бұрын
@@DrLootCrate yeah I noticed it big time last night when I was making some blueprints myself, man that is annoying, but I also had a fair few belts that didn't work even thought they snapped on and beeped but once I placed it in the world it was no go, had to redo them... quite annoying... but blueprints are still a blessing :D made one for the fused modular frame at 1/min... it was crazy... it ain't one click since the blender doesn't fit but it is very little extra work and I just make the alu casings next to the HMF, quite handy and makes them so much easier to make now... used to hate those factories :D
What happens if you're building these, like you, with mark 5 belts/lifts and you go to rebuild it on a new save that has not unlocked the tier for mk5 belts?
@DrLootCrate
Жыл бұрын
It is a great question! I don’t really know, but I don’t think it will work. I dont think mk5s are really required here (don’t remember the actual numbers from making the video) for capacity
@MooseMan44
Жыл бұрын
@@DrLootCrate You are correct. Blueprints with higher level belts can't be used. I've started making all my blueprints with Mk3. Pretty easy to upgrade the transport lines in most factories when Mk4 & 5 are available. That way I can use them as soon as the Blueprint structure is unlocked.
My problem with aluminum factory is not complexity(not after being through heavy modular frame factory), but absence of a good spot with every resource needed for aluminum factory in close proximity(vertical and horizontal) .. except titan forest but it looks awful to build in
while watching this video I just got the sloppy aluminum recipe in my save :D
@DrLootCrate
Жыл бұрын
What a perfect coincidence!
@bananenklops9738
Жыл бұрын
@@DrLootCrate indeed! By the way, thank you very much for all of your satisfactory content!
@DrLootCrate
Жыл бұрын
@@bananenklops9738 thank you for watching! Glad you are liking the vids
Got very big problems when using Blueprints already made in the BP Generator. Your first step (insert 2m foundation) is already the nail in the coffin. Click on save and count to 10. Puff, game crashes and restarts 5 mins ago. Can´t save Blueprints which use blueprints in it self (reproduced it, even with only 1 foundation as a BP, already looked it up in the forums. is unsolved :-/ ) But thanks for the great tutorial! love your guides = )!
@DrLootCrate
Жыл бұрын
Wow, that is pretty annoying! I have never run into that at all, but sorry that you did. Glad you are liking the vids. There are plenty more on the way!
@LiLBitsDK
Жыл бұрын
just load the 4x4 blueprint and rename and save it as the new one
@timothygibson4596
Жыл бұрын
Delete your blueprints folder if it’s created then make a new blueprint then save
@LiLBitsDK
Жыл бұрын
@@timothygibson4596 no need for that just don't "build" blueprints inside blueprints... LOAD them ;-)
@timothygibson4596
Жыл бұрын
@@LiLBitsDK I don't think you follow the advice or if it was aimed at humor I didn't get it, the easiest fix when my game crashed because of blueprints was to delete the blueprint folder (backing up my blueprints) and reintroducing them when I recreated the folder in game with the maker.
I can’t find the water Input an I just dumb lmao
Can you post the blueprint in satisfactory calculator?
@DrLootCrate
Жыл бұрын
Access to my blueprint files and save games are an exclusive benefit to my patreons. I like to give my biggest supporters something special. If you aren’t into that, no problem. Just follow along this free guide and knock it out yourself.
@brodriguez11000
6 ай бұрын
@@DrLootCrate Duplicated, although I had to move things on the smelter/constructor side forward a bit to make the beltwork work. Be nice if the designer had a block move.
Copper Powder is OP
@DrLootCrate
Жыл бұрын
I am going to making a ton of that soon. I will starting my nuclear pasta build soon
how is it hard to build aluminum? bru i just build like 180 alu sheets in 3 hours, not hard at all
Alternate recipes... which you may or may not get... so these "how tos" are pretty much useless
@DrLootCrate
8 ай бұрын
Yeah I know. But it basically impossible to do this without alternates. After I already found them all manually the first playthrough, I just go unlock them on satisfactory calculator nowadays
Well done!
@DrLootCrate
Жыл бұрын
Thanks Gene!