I Screwed Up, so here is a Q&A Video
While attempting to shoot a video on a completely different topic, Justin ran out of argon. So instead of wasting a week with no content at all, we created a Q and A video from some of your most asked questions as well as the pink TIG glove story. Enjoy.
Пікірлер: 102
To paraphrase a saying from the dog training world, "The only thing two welders can agree on is that the third one is doing it wrong."
@baaamakingbaaaa
Ай бұрын
That's funny. I know a lot of dog trainers and I came up with one too. "If you have a question- ask a dog trainer because they know everything".
9 Tanks....I remember a video (probably the cup size one) of you saying you're not worried about the flow rate so much, because you are flush with argon.....and here we are. Thanks keep em coming.
YOU SIR !! Gave me the push to start welding at the age of 61. That’s when I started on the journey. Now at 63 it’s tougher to hold my hands from shaking when tig welding. Yeah they ain’t pretty, but that’s when I become a metal grinder 😁🤙🏼🤙🏼🤙🏼
@russellthompson3486
Ай бұрын
@WelldCoach yes !! The old guy comes out the victor 🤙🏼🤙🏼🤙🏼
Welding physics, time is heat, junk, clean, gas, frequency, arc focus, etc. Between you and Mr. Collier, I've managed to fix cast iron gears in a vintage planer, a vise, restore a classic car, repair parts for profit. Nothing to complain about here.
Little over 20 years??? Newbie! LOL. Seriously, been welding TIG, stick, and oxy-acetylene for a little over 50 years, taught welding on aircraft for 5/6 years and yes, like you Justin, I always learn something new, yes have picked up great info on both your channels. Keep up the good work 👍👍. Am one of the few…..enjoy welding and fabrication. And as someone else mentioned…..pink is just a color, nothing more, nothing less. Ramble on………good info can come out of rambling.
That's too funny, I wear the same pink gloves and its almost for the same reasons. But I have always liked to dress a little flashy too. Thanks for all the videos you've made, they have honestly helped me learn a lot and progress more quickly.
I think you made a very smart career path.!
Hey Justin, IMO nothing wrong with pink gloves, I would have no problem wearing them, its all about the welder's performance that counts. I bet they are excellent quality which is what I care about. Great content, looking forward to more!
Top notch information as always, Thank-you for sharing your expertise and time. I have learned so much from you.
I ordered some TIG art supplies before watching this and now I had to go and order some pretty pink gloves as well, thanks 🥳 🤌
Really appreciate the treatment of the oxide layer on aluminum. That's gold - thank you.
@JCWren
Ай бұрын
No, it's aluminum!
Thank you! I appreciate what you do.
Ah Ha - You answered my Question on the wire brush of Aluminium. thanks. for bonding aluminium thin panels there is a glue bond method used in the car making industry and this works equally as good as riveting or tig welding without surface distortion. Honda used it on the NSX sports car. The Aerospace industry use it also in plane manufacture.
Thanks man. Excellent content as usual.
Your business method is one that I much prefer. If someone is pushing something on to me I usually go elsewhere. Love the channels, the most helpful practical advice I've found.
I remember the day you made the post about your pink gloves. Can't believe it has been that long. I thought it was hilarious. Glad to hear the real background story of them.
Thankyou so much for your videos, I've learnt so much from you and tig welding. 25 years as a boiler maker and love to learn something new every day. Keep up the good work.
Go garb a a cold something to drink.....you are the greatest Justin......Paul
Your voice does have a good tone, and you also speak with an accent similar to the formerly popular transatlantic accent used in a lot of media. People have told me the same and commented on my voice, but it's just how I talk. Especially when I'm on camera or teaching something. Wonder if it has to do with schooling or where parents are from or media consumed or what. Love the pink gloves rationale as well. I don't have time for needless negativity in my comments.
@InchFab
Ай бұрын
No, dude where is the outrage!!!??!!!
@802Garage
Ай бұрын
@@InchFab Hahaha it's everywhere and for the wrong reasons.
@InchFab
Ай бұрын
@@802Garage I demand an argument of some kind
KZread welding goat! Looking forward for the pipe welding video.
Great video Justin, a lot of good information from you for a lot of us, thank you for that. I like your videos a lot so have a great day and greetings from the Netherlands.
Holy crap, if anyone has seen Adam Savage's (from Mythbusters) youtube channel, his mannerisms, hand motions, and just general speaking style is IDENTICAL to Justin's here. Like, they could absolutely be twins.
Love the pink glove explanation
Bravo Justin...the Pink Glove explanation is spot on....... Hats off to a great weldor and great person ..... and here I thought you had just run short in inventory and picked the Pink ones...... Or were trying to intimidate Dusty up in Canada..... Best Wishes from Orlando ...Paulie Brown
I Still have my Defiant Gloves I won from a Drawing at your booth at PRI 2021. Great gloves!
Always very informative, even if you have a lot experience
Pink is very efficient in protecting against UV and infra-red radiation. The british SAS painted their land rovers in Pink for better carmoflage in the desert (read: to better reflect the intense sun). I own welding gloves in several colours, I found that black/dark coloured gloves heat up quite rapidly whereas bright reds or white remains cool for longer (read: reflect instead of absorb radiation)
@Chud-mb7gl
Ай бұрын
I always thought youtube welders wear these gloves for goofs and cool factor
@Chud-mb7gl
Ай бұрын
@WelldCoach you got an extra L in that username, scammer 😆
You have exactly the same career path as me. Mechanic, then Cummins as an engine machinist/engine builder, then heavy maintenance mechanic, then, race car fabricator/mechanic. Now working in V8 Supercar at 57 years old.🫵👍
I love the pink gloves!
You have my respect good sir for hearing you talk / say this. 🤝🏽 9:18
Nice story on the pink gloves... I drive a Raspberry Beretta for nearly the same reason. Someone found me a local rust free car that was probably not what I wanted, aka Raspberry otherwise seen as Pink. I opted to just rock it and have it re-sprayed the same color when building it up. I'm now ripping 11's in the 1/4 with a FWD V6 Pink Beretta. Only one to do Drag Week, 3 times, to this day. ;)
Cool story on the gloves!
I suppose keeping it covered with argon while you brush an aluminum coupon would prevent an oxide layer from forming. Doing it in space would also work. Both are impractical and expensive. (btw. thanks for the q&a.. happy to hear TFS will be doing (more) fabrication stuff)
Nice voice, nice gloves and nice content!
The pink gloves are like the pink extension cords that my buddy special orders. Nobody ever steals them on the job site!
I always figured the pink gloves so you could tell if ppl were reposting parts of your content as their own, kinda like a watermark _Or_ to keep the camera from having washed out effect on closeups. 👍👍
Thanks for the informative video, Justin. I like your no-BS approach to your businesses. Too many "fake it till you make it" personalities out there if you ask me... Not that I think people shouldn't put in the effort, but there is something special about someone who has put in the time and is humble enough to say they are still learning.
What a nice surprise to see my comment asking to tell about the pink gloves. Right there in the top left corner. Thanks Jason, all the way from South Africa. Edit, keep those pink gloves. At least they are prettier than you... 😂
Justin, I love how animated you are. Thank you good sir. Edit: What is your degree in?
Sounds like I need to figure out how to fabricate without welding? Ya know for the algorithm. 😁 Hey!! Someone stole my pink gloves!?!?
Thanks Justin
Love the pink glove story - there is not enough pink in the world :)
Hey. It's anti theft pink.
@deltan9ne306
Ай бұрын
If someone needs my used gloves that bad, I'll give them to them.
@wayne9518
Ай бұрын
Naw, I painted a bunch of wrenches bright pink, they all walked away.
You actually can use spot technique on Al with AC but you need more time. Typically 80 to 250 ms at 50..70 Hz and about 35% cleaning. Current should be 2..3 times higher than for continuous technique.
HAHAHAHAHAH!!! Awesome story of the pink gloves. Weird about the analytic s though.
pink on, buddy. I'll get me a pair when my whites wear out
Retired Marine, served in Iraq, Grunt Units, drink beer, shoot guns, reload, ride motorcycles. And I wanted those pink gloves, just because. Lol. They were out of stock at the time though so I got the black ones. I have to say I do love those Defiant Metal Tig Gloves though. Highly recommended.
Ha Justin I cannot believe that there is so much rubbish about your gloves they are just gloves after all and who cares what couour they are. I have several different colours just depends where I got them from they don't make me weld any better they just protect your hands as they are supposed to do. I like the new channel but I also like TFS so what ever keep them coming.
Justin, I have always been curious about your time in the Navy, you mentioned at one time you left the Navy due to an injury..... I feel my life would have been much different if I had joined the service when I was of age, especially the Navy.....hindsight is 20/20... but at the same time, would it have caused me to stray away from a career in machining.....who knows... Best Wishes, Paul
Your neighbor will steal a pair of pink gloves, maybe he can get one with your signature on it. Lol 🤣
I think its weird that some don't prefer welding and fabrication both! I thank you for not being an ad. I personally do not mind plugging your company from time to time. Makes sense really. Fireball tool has become a complete tool. I found his products from watching his cool build videos. Then he got mad at KZread and posts only stuff that is really just an ad for his company and shuts off comments to be a bigger jerk. I bought his tools before. Sure as hell wont anymore. Lol I'm one of those "pink is not for dudes" people but I don't get tore up about it. I would probably never were them but who cares if you do! I did think it was same gloves I saw at PRI! And it was. Cant wait to see more fab work. Race On Brother
I adopted the sacrificial aluminum plate after taking your TFS class. It's an absolute necessity for me at this point. It's just one of the many valuable things I learned in that 8 hours. If anyone has the opportunity to take the class, fucking do it.
What we learned from this Q&A: Pink gloves make you weld GOOD. 👍👍👍
"Shake babies and kiss hands" 😂 perfect
Hey justin could you use solar flux on titainum for back purging
Well, technically you could keep the oxide layer on aluminum away if you were working the part in a vacuum or cabinet filled with argon or some other inert gas, but that is so not worth the effort it's hilarious.
You do have a great radio voice - both you and ManKandy! I especially love that you continue to wear the gloves to piss off the homophobic gronks 😜 PS smooooooothest sign-off ever 😍
Justin, why didn’t you address my question what if you put acid flux between the aluminum plates while spot welding so the acid heat up and eat up the oxide layer while welding spot welding in this case and create a good aluminum welded bond?
The pink Defiant gloves are softer than the black Defiant gloves……….seriously, I have both
We are still getting the round tubes video later, right? 👉👈
but what if you argon purged the entire room, then did the aluminum spot weld!? 0.o
My aluminum only gloves are pink. My ss/chromo gloves are black.
Do you know how to weld brass ?
On the gloves, fit and feal matter not the color. Just an aside I do not look good in pink but if I needed gloves and the only color was pink I would wear them, I prefer black or natural (tan).
8:23 thoughts on grinding down welds (say when c notching on a chassis)?
@jasonsweeten2851
Ай бұрын
Depends on the reason you are grinding the welds if the welds are ugly there's a good chance they are not strong and need to be cut out and redone. your frame rail is a pretty important piece it should have quality welds on it. If you are grinding simply for Aesthetics and you have good welds on your c-notch you lay a cap weld over top of them so that when you grind you're only shaping the cap weld you're not grinding away your base material or structural weld
@Mr_jz_12
Ай бұрын
@@jasonsweeten2851 went on a rabbit hole youtube/Google reading binge about the subject one night saw a few saying not to on anything structural, some saying it was ok. 👍👍
Thanks for the video 1st off I figured breast awareness for that is why I have a few items that are pink plus I have only girls that live with me but I’m teaching combat and working skills so if they want to have pink rifles gloves ear plugs muffs knives you bet I’ll buy and show them how to use properly and with that being said you better bet I’ll teach them to weld and work on their car so Rock on brother I really appreciate your videos since I got hurt in the military I can’t afford them high prices and need to do allot myself and your teaching me allot thank you and I wonder will you do another welding live this year iv watched the last one five times already and would like to do it for real I live too far too just swing by and do an eight hour class anyway hope all is well thanks again
good to cut through the bs and get the rite info.
I use the exact same pink gloves in a medium size so they are very snug...
@trevordeemie674
Ай бұрын
@WelldCoach So glad I can spell because you almost got me 🤦♂️
When are you going to teach Kandy man how to gmaw "mig" weld properly, lol
Imagine being scared of a color.
hey buddy i love your channel but i would like your honest review or a how you would do a brass bore @ 2"wide x 6" deep with 2 gouges 3" deep and 1.5" deep. im rather new but managed and it passed high pressure @ 5000. you can Check out my short but couldnt film the action.
@InchFab
Ай бұрын
Nah
@MadWeldz
Ай бұрын
@@InchFab all good. I don't really need your option...
don't get in more trouble
Support your daughters. Be men and show them how they can be welders too. Wear pink gloves.
Do you know in medieval times pink or light red was the color for boys and blue was for girls 😊
@Kebekwoodcraft7375
Ай бұрын
@WelldCoach wow thanks 😊 What I have to do ?
Oh yeah anything interfering with the current current of the house or the place will destroy electronics😊
All right I'm 11:30 into the video now I'm wondering if I can like attach a welder wand if you will to the side of an angle grinder if and brush and be like almost like all at the same time and then kind of like make it wait a little bit you know as long as speech to text takes forever to get it right
1st
Slappnig your hands down on the table every 5 seconds got to be very annoying, otherwise excellent video!
HomoPhobic, they have every right to feel the way they do. Right or wrong, they have their right. Whether you like it or not. Were you wearing colored fingernails on one of your videos? Explain that!
The f*** what they think until they put the gloves on and then make them think about the gloves they put on
Internet regurgitation is such a bad problem. The problem is you don't know if the source is credible. And worse is the joke videos that are presented as fact.
Real men ware pink, the rest are closet &$#* nuff said
@rickbrandt9559
Ай бұрын
@WelldCoach WOW, who know.