2:25 - 2:30 just so everyone knows these screws a loosened by moving the screw clockwise (to the right) not the conventional way which will lead to the screws snapping 😑

@autoexpert7048

Жыл бұрын

Thanks, for help!😊

@andrewkedney8755

Жыл бұрын

Any ideas how to get them out when the torx head snaps 😪

@autoexpert7048

Жыл бұрын

The same thing happened to me. You have to open the metal part, so you can reach in. It is attached to the edge with screws.

@engillcool21

Жыл бұрын

How do I lower the window after taking the panel off xD

@danielprado5322

11 ай бұрын

@@andrewkedney8755 just happened to me. tried drilling out. so far. its fucked.

Just brilliant, very informative! Hives me confidence for the job on the weekend! Thanks for sharing 👍

@autoexpert7048

Жыл бұрын

Thank you! Success!👍

Thnxs!

What size torx screwsis the back panel held on with please as I have a set supposedly for VW but I don't have that one. Thank you

@autoexpert7048

Жыл бұрын

Try T20. I'm not near the car at the moment. I will leave you a message tomorrow.

@autoexpert7048

Жыл бұрын

T20. Sorry for the delay.

@windspoint

Жыл бұрын

Thank you for your time it's much appreciated

Your video jumped from removing the interior metal panel to the exterior door handle removal.. Does the handle need to be removed first?? I removed the window as in your video but something is still holding the interior metal panel from fully coming out, if it the exterior handle or ???

@autoexpert7048

5 ай бұрын

check if you have removed all the panel screws, press the 3 plastic rivets. they are located next to the long cable coming out of the metal panel. push the rubber of the cable to the inside (in the door), and there are also some plastic collars that hold the power cables. it is possible to have to break them and put others after.

Olá Obrigado por partilhar o vídeo. 🙏 Tira-me uma dúvida: Como se tiram os "três plásticos brancos" que prendem à fechadura. Em cima do lado esquerdo

@autoexpert7048

2 жыл бұрын

¡Hola! use un destornillador y presione con la punta del destornillador en el centro de los plásticos. golpea el destornillador con un martillo y saltará. no podrás volver a ponerlos, pero no será un problema.

@jcsousa33

2 жыл бұрын

@@autoexpert7048 🙏

Hello darknes my old friend

@autoexpert7048

2 жыл бұрын

hello :)

So it was the cable & not the lock latch mechanism ?

@autoexpert7048

5 ай бұрын

Yes, was the cable. The lock latch was ok.

@juantwo322

5 ай бұрын

@@autoexpert7048 is that the same cable that leads to the inside door release handle

@autoexpert7048

5 ай бұрын

It is similar to the one inside, only it is shorter. It is 30-40cm. There are two. The long one on the inside towards the driver, the short one on the outside.

Vw engineering is the worst.

@darren6831

5 ай бұрын

Have you seen modern Ford transit connects ? Changing the battery is almost as awkward as changing the engine 😂

Bonjour, merci pour votre vidéo, c'est quoi comme douille pour démonter la vitre à travers les trous du panneau de porte ?

@davidmckeown3695

Жыл бұрын

it’s E5 not E6 i’m doing one as we speak

@autoexpert7048

Жыл бұрын

@@davidmckeown3695 Thanks for the help. I didn't remember anymore.