Do you think it would fit an XL REI sleeping pad inside the rack? Because that’s where my Wife would make me sleep if I even thought about doing this? 😂🤣

@ka3274

2 жыл бұрын

If I wasn't married I'd definitely be happy living in a garage with just my tools and squat rack. I'd be retired by now and just train every day. The rest of the house is for the women, just give me a nice garage space and a Coop Squat and I'd be set for life

@Dsquaredforever

Жыл бұрын

Definitely lots of hammock attachments 🤣

Love to see it! Crazy build, thought out, loads of storage! The Supercar of racks. But what would you do for the 'honda civic' of rack/functional trainers. Would love to see a small space high quality custom rack like this. Maybe 16" 4 post with wall mounted to save on that 6th post but still provide stability over floor supported half racks, having a lat pull/functional trainer attachment would be key, Would you go with stacks vs plate loaded. Maybe safety arms for space saving when not needed vs having a full in rack safety. Would be interesting to see what you would come up with!

Job's open... although we usually don't have much headroom for new employees.

@bmstylee

2 жыл бұрын

Headroom can be increased by moving out of the basement

@thomasbrown7328

2 жыл бұрын

@@bmstylee Lol it could be Foyer Brandon or Master Bedroom Brandon!

@BasementBrandon

2 жыл бұрын

@@bmstylee that was the joke 🙃

@reginaldchesterfield8110

2 жыл бұрын

Hahahahhaha

@avinashtyagi2

2 жыл бұрын

Dig down

I don’t think it would hurt to have Sam start over and double check everything.

@daryoes

2 жыл бұрын

I agree, he was texting.

@TheDude10k

Ай бұрын

he was filling out an application to work for REP Fitness

Most times people say they have a "home gym" they mean a Squat stand and a flat bench in the corner of a dark wooden shed. When This guy says home gym, he means it, holy mother of God that's insane.

By 2025 Coop's entire house will be a squat rack

@KenanTurkiye

2 жыл бұрын

And Sam will be jackedy jacked.

@myomilky

Жыл бұрын

😂

You could put some drywall around all those rails and run some electrical, plumbing and rent it out as a 1 bed 1 bath tiny house.

I’m a wife and the handy one in the family so I’m planning out, purchasing, assembling and installing everything for our home gym. Love seeing these vids as they are great source of inspo and info. Plus Coop you are a very silly dude and I love it. Now I have to find space for a Handheld Dynamic Weight Storage Rack..

For the sake of future moving guys, I hope this is your forever home gym Coop 😂

@SirSketchable

Жыл бұрын

Good luck, coop buys a new house every 18 months or whenever Rep comes out with a new rack model

awesome home gym, Coop! your gym has come a long way since 2020. the walls, lighting and racks give it an awesome touch.

Glad you got the surplus strength pulley! Super good idea with attaching it to the rhino, I’d love to see a video of you getting creative and creating options with the surplus strength unit.

You demonstrated what the rhino can do so well and I wish I had the space for it. Seems like a great way to add some variety in a convenient way.

This is amazing and I love the idea. Great job Coop!

That is amazing!! Total respect for your passion!

This is awesome! Very creative rack you have there Coop. I'm inspired!!!

Coop is my hero....almost makes me want to drive through Springfield.

I’ve just started out my garage gym pursuit and bought a bells of steel power rack, I feel trapped with the limitations of a 2.3x2.3 rack with 5/8 holes after witnessing this video and now want a more open platform like this! The UK is so far behind the US and we have to import rogue from Europe which sucks as the second hand market is next to non-existent. Maybe it’s best I don’t as I’ll get divorced.

Great video! Do we have an ETA on the functional trainer comparison video? Excited to hear your thoughts on the different options

This is the best garage gym channel. Swole Jole approves.

I made the original coop squat with slinger and rogue crown pull up bar on the front. Love it

Your videos have been a huge help in my first rack purchase decision. Thank you. PR-5000 VS ROGUE Monster. Now trying to decide which Rogue Monster version i want. There are a few options. RM-3 2.0 , RM-6 2.0, RM-4 2.0, Im lost and ready to order. They all three look the same to me.

Love it. It’s beyond overkill.

Bwuajajaja “did you get the bolts?” Then the x files music ah man too funny

Love open source system theory. Followed your lead and did the same.

That...looks...AWESOME 🔥🔥

Open source is so awesome, Coop can custom-engineer a square, and call it a box!

Time to do it again at all 3 price points. Have fun Sam 🥳

Hey Coop, do you think you can do a video on how someone who works out in a garage gym can find a coach? There’s no info around as to how to go about it and what resources you can trust. That would be value-added for sure. Thanks for considering.

If I could only choose between 'closed environment' or 'open source', I'd go with the latter. Buying a single decent rack and being able to add almost anything from almost any company, is a huge benefit that to anyone but the truly professional outweighs the extra attention of detail and more tailormade fit. At the end of the day it's all gym equipment; meant to be rugged and rarely requiring 'closed system' like setups in order to function. Great work!

Coop and Sam are THE duo!

Love how you maximized the use of the rhino

Coop you are an inspiration, amazing stuff! I was looking to do something similar and connect my rogue RM6 to a Sorinex functional column and Sorinex upright. The reason I haven't pulled the trigger on the Sorinex column is that I cannot find out if the height of the holes for the Rogue uprights and Sorinex uprights line up. Any advice from anyone?

Great video! Can you attach the prime RO8 pullup handles to a rogue monster lite crossmember? Thanks for all your content!

Hi Coop! Can you tell me the make of the steel plate ball target that you have attached to the rack? I am looking for exactly that for my rack. Thank you.

What’s the slam ball plate on the side of the rack? I’ve been looking for a good one and don’t wanna destroy my walls thx

@ZED508

2 жыл бұрын

Seconded, what is that thing?!

@KhoaNguyen-ys6hg

Жыл бұрын

Step up plate from stray dog strength

Cool DIY plate dividers

Been looking all over to see if the rhino attachment is a huge hinderance on doing incline benches. What are the negatives to attaching the rhino? Looking at the rm-6 rhino combo. 😊

So nice!!

Hey Coop, does the Vendetta increase the length of the jammer arms? Would you still be able to use the vendatta arms on a rogue short lever arm configuration inside the rack?

With the rhino on the back how are you stepping in for a squat without hitting the feet on the platform? Also there is sufficient bench set up? I like the bench under the bar so when I unrack I don't have to pull it over my head from behind.

Amazing Coop! Shows what can be achieved with some creativity. If ever you want to send your old Kensui EZ vest to a new loving home, will be more than willing to show it love 😊 Loving the content 🇬🇧

Garage Gym Reviews has jumped the shark.

Would love to see a video of you loading / unloading weight on the rhino - does not look like it would be quick / efficient to get 45lb plates in and out....

Hi Coop/Sam! Can you let me what brand of jammer arms are the ones at the back in front of the Rhino squat?

Where’d you get those dip horns? I know you mentioned in the previous 1.0 coop squat you were going to get a custom set made I think from black widow. Since then they have a pair on their website. Are those the ones you’re using in this video, could the ones they have on their site work just as well either way?

I wanna lat pulldown, was thinking about the bells of steel. Now I'm considering something like this. I don't know if I want to load it though but it would be nice to have more than 310 lb

Awesome setup Coop! I specifically emailed rogue about being able to attach the bench prop attachment to the rhino. They said that they were incompatible. It would’ve been the icing on the cake to go with the RM-6/monster bench. Instead I opted to go with the Froning RML-4/RML comp bench to save some coin. Hopefully one day they will come out with a RML rhino.

@cormacakehoe

2 жыл бұрын

Surplus Strength and some of their customers have said you can build a Rhino into a Monster Lite - probably the RML-690.

@eddiezuniga5382

2 жыл бұрын

I bought a stand alone Rhino and I was able to drop it right into a RML-690. The Rhino platform has 1” and 5/8” holes pre drilled, which means you can attach the platform to a ML rack without any modifications. Of course Rogue doesn’t tell you that, and even when I called them to ask if it would fit before buying they said they would not recommend it because they had not tested it on a ML rack. The only downside is that the unit only comes with 1” bolts so you’re gonna have to buy your own 5/8” hardware from Home Depot. I also called Rogue regarding their bench centering bracket and they told me they only sell it as a complete unit which comes with the cross member.

I love that 3 change plate attachment

@GarageGymReviews

2 жыл бұрын

Same. Simple, but well done!

what is that dip attachment you are using? Looks perfect

Can you explain how you made those weight plate storage dividers?

I don't think I saw a single comment supporting a closed system...

@BeGrizzlyStrong

2 жыл бұрын

Cause open source is the best!

Hey Coop, what width are the crossmembers that you have the plate posts attached to? And are they from REP?

Since you used titan uprights did you have any issues with their metric hole spacing?

Need to get a build list/guide for the og rack and this one 🤣

After all the issues you had with the Rogue pull up handles... surprised you did not go Prime RO-T8 with 1" spacers.

@GarageGymReviews

2 жыл бұрын

I like the RO-T8 Handles, but I prefer having the round handle most of the time tbh.

So it looks like this is 4 Titan extension kits, 8 43 inch rogue top cross member items and rogue rhino stand alone? With 4 bottom cross members? I cant seem to find the bottom cross members on rogue's site though.

is that a slam ball rack attachment? where can I get that? it looks different than other wall ball target attachments.

Hey Coop - Do you have any clearance issues loading plates onto your Rhino? Can't tell what size Rogue Top Crossmember you have spanning the distance?

Coop, can you do a review on all the squat wedges out there. PLEASE! I’m a big fan of Rogue but I don’t want to purchase from Rogue just because I’m a fan if I don’t hve to.

Have you found a good way to do hip thrusts with the Rogue Rhino Coop?

What are those dip horns? Looking for some two piece dip horns that fit on 3x3 racks

Absolutely 💯 brilliant 👏 🔝✌️😃

2:21 now I know what to count at night so I can fall asleep 👍🏼

Do you like the 24" spacing for your rhino drop in or do you feel 30-36" would give you more flexible options for additional set ups, bench arrangements etc? Going from a 4 post to 6 post setup and curious with the functionality you've experienced.

Didn’t see a drink spotter…

What a beast of a rack.

Coop - Would you please tell us the name of the black crossmembers sitting on top of this rack? They are not bolted down .

So bad ass! Functional real life system. Space consuming but really cool!

I see the amount of plates you have. I've watched your videos about the different types of plates available. I'm looking for plates, but i don't know how many of each to get to be optimal. Can you please do a video "Optimal plate kit for beginner, intermediate, advanced".

What is the metal plate you are doing the medicine ball throw onto?

Nice Arc'teryx, my guy!

Assambly Sam threatening to take a job with BasementBrandon 🤣🔥

Would you be able to bolt a Titan extension kit to a Rogue rm3 to make it a 6 post?

I need to know what that steel plate that he is doing slam balls on and the single dip handles

Sam killed me with the Basement Brandon comment!

This guy sure loves pull-ups

Ok I can’t be the only one wondering where I can buy that slam ball plate mounted on the side of the rack. Anybody know where I can get one for a ML rack with 5/8” holes?

Sorry, I didn't catch the name or brand of those dip bars you are using?

What company is that medicine ball target attachment from?

What dip handles are you @garagegymreviews using?

Hey cool where’d you get the wall slam attachment ?

What’s the name of that piece that lines up the bench in the center?

make a “budget” version build video PLEASE with cherries and knurling on top PRETTY PLEASE

Coop, what chains and chain strap do you use??

What made you want to change from using the Rouge Slinger to the Surplus Strength lat pull down attachment? Thanks so much!

@GarageGymReviews

2 жыл бұрын

It's removable so I can get it out of the way when I'm doing weighted pull-ups.

You should review the adex club and their mace!

At 2:36, what’s is the name of the attachment for the slam ball target?

💰🔥💰BOOM‼️‼️

When are you going to review the Force USA all in you got a while back?

What is the brand of the dip horns you're using?

Does anyone know what brand the drop-in dip horns are?

It would be cool to make a series called pimp my garage gym

Screw the Monster Cave, this is the Coop Cave!

Gosh. I wish I was working there and had opportunities for hand me downs lol

It looks like Coop made his own DIY Rogue "cave" type deal.

Hey Coop would the Rogue Monster spotter arms fit on the Rep PR-5000 rack? I don't like the rep PR-5000 spotter arms they don't come with the pins.

@Fabiokovach

Жыл бұрын

Did you find the answer?

Can you review AT HOME training programs??

Hey Coop, what pants are you wearing?. They look great!

Thanks for the update on the rack! If you had gone with the 47" design, how would you would have dropped the Rouge Rhino in? Would it still work or what kind of modifications would have to happen?

@GarageGymReviews

2 жыл бұрын

No, that's really the main sticking point because unless some serious modification is made, the Rhino only works on a 49" width.

@jimsolmer1292

2 жыл бұрын

@@GarageGymReviews trying to tag you in my comment to show you a scammer. Looks like he's left 31 of the same comment for a giveaway and just created the account. This is his KZread channel: kzread.info/dron/mRDR21IMNa1lFbmniKCBEw.html. I just reported it.

@Camself

9 ай бұрын

Where did you find 49” cross members?

@stgvetdiaries3325

7 ай бұрын

@@GarageGymReviewswhat dip handles are those?

The home gym version of “my NEW dream desk setup!”