I PAINTED THE EP3 & INSTALL A RACE HEADER!
Автокөліктер мен көлік құралдары
I Painted my EP3 and installed a Jackspania racing header that is compatible with K24 swaps as well! .If u like these videos please share them around so we can grow the channel! Don't forget to like and subscribe!!
FREE Holy Bible download
tinyurl.com/erzjuatw
Link to Me painting the EP3 (SUBSCRIBE)
• CHEAP RUST-OLEUM SPRAY...
DISCOUNT CODE: TXHONDACHANNEL
Link to Jackspania Header USED IN THIS VIDEO
jackspaniaracing.shop/product...
Copyright free music info by Kingshock
/ @garden_state_grandeur
/ gardenstaterecordsllc
Click here to subscribe to my other Channel
/ jamesdguy
Message me if you need to reach out! I'm here to help however i can!
texashondachannel
For merch contact me at
moore_motor_sports@yahoo.com
/ texashondachannel
texashondachannel For faster response use instagram.
Follow on tiktok @ texashondachannel
Here is a link to my other channel
tinyurl.com/y25dp3zm
Here is a link to my Instagram
/ texashondachannel
If you wanna donate to the build here is a link
ANYTHING HELPS ME GIVE BACK TO Y'ALL!
paypal.me/mooremotorsports
Copyright free music info by Kingshock
/ @garden_state_grandeur
/ gardenstaterecordsllc
LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!! GOD BLESS
#TURBO #DYNO #500HP #viral #trending #tiktok #stock
Пікірлер: 71
Up at 2 am and a video pops up. Yes sir!
@Lee_songbird_94
Жыл бұрын
Just means he's putting in that work!
@2StallGarage
Жыл бұрын
@@Lee_songbird_94 💯
That brake lights cool. I was thinking u should make it a brake light when I saw it on the paint video then seen later n the video that's exactly what ya did
It's gonna be loud!
@sinformant
Жыл бұрын
I second that!. I had a dc sports header, test pipe, and full straight flow through exhaust and it wasn't too bad, but I bet that header is gonna up that volume a lot!
@matf4426
Жыл бұрын
I just got back from a ride it's LOUD!! It's only going to get quieter.
Looks amazing especially with that rim coloured combo
@TexasHondaChannel
Жыл бұрын
Thank you 🙏🏻
@matf4426
Жыл бұрын
Agreed and in person these rims turned out particularly good!
Looks awesome! I was skeptical, but the teal/white combo is perfect!
@TexasHondaChannel
Жыл бұрын
I know a lot of people were skeptical at first too. I have a vision in my mind and brining it to fruition really helps show people what I seen in my mind lol
I know some day I will make a swap using your videos. Keep up growing. Love!!!
@TexasHondaChannel
Жыл бұрын
Thank you and hope you do! God bless and much love!
@spankthemonkey3437
Жыл бұрын
I used his video to do the auto to manual swap in my 97 lx😃 dude is more detailed than alot of other people and he focuses on some of the minute problems that others dont. I was always mechanical just on small engines. I can build a 8 or 9000 rpm flat head 5hp Briggs and stratton with my eyes close
I love the green egg!
Nice color!!
Gonna sound nice!
@TexasHondaChannel
Жыл бұрын
Yea for sure!!
I hope you do the k20z3 head and type s oil pump. I’ve always dreamed of doing so to my em2 swap. I Imagine that’ll make a really strong K20a3. The only thing it’s missing would be the rotating assembly but that is an extreme. I myself wouldn’t do rotating assembly unless it’s really needed
Hey bud , I took the bolts off above the strut by accident. the two that hold the steering rack in place. I only got one out of two back in place , do you think it's serious not to have both bolts back in?
What high flow cat would you recommend on a 02 rsx with that header?
Thanks for the wonderful information. I was wondering if jackspaniaracing made other stuff. I hope someday, when i come to taxes, i can meet you. Thankyou from tulsa, Oklahoma
@TexasHondaChannel
Жыл бұрын
Yea for sure and he does make a lot more stuff!
8:38 is it suppose to be like that? Was gonna get one but probably won’t if it doesn’t fit properly
Speaking of cats and EPA: I'd love to learn more about how your modified vehicles are inspected and registered. I've been gobbling up some of your older civic videos, learning for a project I hope to start soon; thanks for the great content btw. But like most KZreadrs you don't talk much about inspection and registration. Maybe I'm getting old, but I won't be able to enjoy driving around with my sick modified civic if I'm worried about fines or worse. I've done loads of research (specifically for Texas!) but have lots of unanswered questions. Happy to pass those along if you're ever interested in a video about this (I'd like to think it'd be a popular video).
@TexasHondaChannel
Жыл бұрын
The reason you don’t hear people talking about it is because we don’t know who is a rat or snitch and what their true intentions are. Older cars aren’t hard up on inspection though and the local area isn’t required to pass emission test so as long as it pass safety inspection then it’s good to go.
@jdonor3
Жыл бұрын
@@TexasHondaChannel Ah yeah no emission test helps. I'm in a bigger metro area so I have to pass OBD II test at a minimum. Figured it might be possible with an s300 added to the factory ECU. What I'd really like to do is find a solution they can snitch on all day? 100% above-board? Just not sure that's possible. The laws I found on the state's website are only about emissions so it should be possible.
I heard this lomg tube header modification raises your redline
You didn't end with a test run, but anyway it was still a good ending with good message😃
@TexasHondaChannel
Жыл бұрын
Ha yea you would understand if you saw how bad my tie rod ends are. This ain’t going for any test hits until I get them replaced 😂
When you said you might lock VTEC I was like the…. WHAT?!?!
Is it he best header to use
How do I reach out to you if I don’t have social media? I have a k swap that’s been done but dead for 2 years now idk what I did wrong it starts and dies I’ve watched all your k swap videos idk what I’m missing or doing wrong
Is that a skunk 2 exhaust?
I think It would be pretty cool with nitrous on it .. we’ve seen you do all motor,turbo and supercharger but not nitrous
@TexasHondaChannel
Жыл бұрын
It’s because I live by a motto that bottles are for babies 😂 but nah not a fan of spray
Damn you taking off your bolts made it seem so easy and yet I couldn’t smh
when it's hot outside my civic 1998 won't run its start but stall right away do you have a idea of what it can be ?
@silentsnail7462
8 ай бұрын
not enough coolant or a bad engine fan
Just throwing it out there, O2 sensors should be mounted between 0° (straight horizontal) and +60° or so above horizontal in order to avoid frozen condensation damaging the sensor on cold starts. I assume this is less of an issue in Texas than it is in the Midwest or something, but the fact that a legitimate header manufacturer designed it that way is concerning. Fortunately stainless weld-in O2 bungs and plugs are cheap as hell if you ever have an issue.
Bro that color reminds me of the early days of street racing with the skittles colors! Love the content but wished you went AWD with the RSX. But that is my bs! Keep on brother!
@TexasHondaChannel
Жыл бұрын
Yea and Rsx is still around and maybe it can still happen just not on my dime because i don’t have much dimes 😂
@bigccordova9214
Жыл бұрын
@@TexasHondaChannel Your right. I am just bias because I am an Acura nut because I worked at an Acura dealership. Your doing an awesome job from an OG view. I appreciate the faith/religion spin too. I can't to what's happens next....
@TexasHondaChannel
Жыл бұрын
@@bigccordova9214 thank you and trust me I’m WAY happier with Acura but this car is what I wanted for a very long time and the deal was too good to say no too. I have a $15,000 engine which will help us with our future. I do share the same love with the Acura as you. Unfortunately content isn’t cheap for me and people loose interest fast when I do end up liking a build. Views are my paychecks so it puts me in a tough spot.
@bigccordova9214
Жыл бұрын
@@TexasHondaChannel Understood. Can't wait to see what is next!
So you can put a a2/z3 head on a a3 block?
@joaquin0023
Жыл бұрын
Yes
I have same car I want link for that headers
Evening. I watched ur auto to manual swap. Just did one this week. Car was fine prior. Now manual is all in and hooked up. It cranks but no start. No fuel pump prime. No spark. I wired two big black wires together. Other two for the key to be taken Out. It just makes no sense.
@TexasHondaChannel
Жыл бұрын
Check the thermostat ground. Make sure you have a transmission to frame ground as well. Grounds are super important. If you have too just run a ground from the negative directly to the transmission. Make sure its on the metal, Also the thermostat ground i remove sometimes and forget to put back on and i learned the hard way. Hopfully thats all it is. That particular ground controls, Ecu, Fuel pump and more.
@Kilo_9
Жыл бұрын
So it ended up being ground broke on thermostat. Fixed that. Now I have two codes. I’m guessing need a manual ecu P1768. P1382. Btw I have d16y7 head on d15b2 block with aooo trans 5 speed. Manual.
@TexasHondaChannel
Жыл бұрын
@@Kilo_9 it’s best to run a manual transmission ecu for sure.
@Kilo_9
Жыл бұрын
@@TexasHondaChannel well I got the manual ecu it runs worst then auto ecu. Only code on auto now is p1768 which is auto shift sensor. There away I can bypass that or something bc car is to rich and slow acceleration and barely has any power
Enter to win
What size wheels are you running?
@aycarambas
Жыл бұрын
On a previous video he said they are 16's
@mazdafy1428
Жыл бұрын
@@aycarambas thanks man
Heeeeeeaps better. Stock manifolds suck. Can I ask what king shock song this is please ?
@TexasHondaChannel
Жыл бұрын
I don’t keep track. I have a entire folder of his music I just pick one and use it. It my next video on Moore Motorsports garage it’s listed in the video. The one in that video is called XsoulX idk about this one
Eat your wheaties before you mess with those springs, he’s not playing they’re tight lol.
I'm a Christian btw if you can't drive without power steering than your a wheenie Right?
Girly car that colours ugly😂
@TexasHondaChannel
Жыл бұрын
Well im not sure if you know this but colors don’t belong too genders 😂 to each their own. 😂
@saynomore3022
Жыл бұрын
True👍
@spankthemonkey3437
Жыл бұрын
It reminds me of a turquoise like color its not bad on the car. I would like to see how its going to blend under hood with valve cover and other colors blending.
Hey do you have an email I could message? You are super knowledgeable and I need help with my d16y8 build lol