Wow! Lady K is beautiful in her purple and teal. 💜💚

For boat painters this video is a real gem. Thanks Jim

You didn’t cheat….you adapted and overcame, and it looks great!

Purple and Green compliment each other very well. Beautiful job! It's going to take me a while to get used to the new colors . . . kinda like a new hair cut!

Lady K looks Great!!! For random orbital sanding, always get a long flexible hose hooked up to a bucket (cyclone) trap and then to a shop vac. (Don't overthink fitting hoses and the tool just use duct tape. Hose goes over your shoulder.) This keeps the dust under control, but it also keeps it out of the sand paper grit so your sanding is more efficient. Always us vacuum cleaner bags in the shop vac. If the one you bought doesn't have this option? Just duct tape them in. Been doing if for years. The cyclone trap catches most of the dust, the bag catches the rest and the pleated filter on the shop vac never gets clogged up so you never lose power. Also wear a respirator and a Tyvex suit. A respirator is 100%, paper dust masks, even good ones don't work nearly as well. You want to keep the dust out of your lungs. For shaping: Get a long belt sander belt, 4" wide and cut it, then split it lengthwise. Get cut a piece of 1/4" plywood put handles on the ends. Just copy the tool that's like this. Glue one strip on it. This will shape your hull patches 'fair.' You can then use the finer grits. And grits. Always step through the grits. If you start with 40, go 60, 80, 100, 120, 150/180, 220. It could take you weeks to remove 60 grit scratches with 120 paper. What you'll find is that you need a lot of the lower grit pads and not very many of the higher grit numbers. And don't wait until the sandpaper is gunked up to replace it. As soon as the 'tooth' in the abrasive is worn off it's done. Painting is of course 90% prep, 10% painting. Replacing sandpaper sooner saves a lot of time and effort. David Lee, KZread channel, who fixed a Lagoon 450, is the expert on dust control. (I gave him all the tricks I learned over 50 years, and he improved every one of them. ) Great to hear you use a roller extension pole. Why oh why do so many KZreadrs never use them?? The 'swirlies' mxers. Good tip. I've tried to bootleg drill mixing tools. Not worth it. Just buy them. Well worth it. Mixing epoxy? I always use a cheap gram scale ($10 on Amazon). I drape saran wrap over the top. Make sure you look up the mix ratios by weight. (Different than volume). I've made simple spreadsheets for the two West System Hardeners. You only need 0 to 10 in 0.1 or 0.2 increments. (grams, ounces, pounds... the ratios are all the same. "1.1" can be 1 gram, 11 grams, 1.1 kg or 1100 pounds) Column 1 is resin, Column 2 is hardener, column 3 is total weight. One page per hardener. Color code it with highlighters and laminate them, or seal them in a baggie. Beats those pumps cold. With the cheap gram scale you can mix tiny amounts or all the way up to 500g (l lb). If you go over with the hardener it's easy to fudge a bit more resin to make it work. Once you try this you'll never do it any other way. I can tell you know what you're doing. You have the heavy duty filler. I've seen KZreadrs attach hardware with lightweight fillers. The instant pancake mix I've used on occasion is better for this than any lightweight filler. And white vinegar is cheap and makes a great 'thinner' for epoxy clean up. I drop the cheap 'chip brushes' in it and use them over and over.

@LadyKSailing

4 күн бұрын

Thanks for the tips!

@CanadianGrenadian

3 күн бұрын

Hey WillN2Go1 what city your shop in?

@WillN2Go1

3 күн бұрын

@@CanadianGrenadian My backyard in California

If you apply soapy water (dawn) under your decals be fore applying them, then you can adjust them, and it helps remove the air bubbles.

As a house painter, doubling back like you did when rolling is called “back rolling” and is the most effective way to paint… even your house. It is like 1.5 paint coats in one go. The orange peel is usually because of too much paint on the roller, but doubling back tends to remove it. Sounds like a rough product to work with, but great results 👍

@chrisrancat2808

4 күн бұрын

Iam jealous of the small box you use for fiberglass repair. Mine consists of an entire job box plus a good chunk of real-estate in my garage.

Awesome job Tim. She looks beautiful. Congratulations

LOVE LOVE LOVE the new color and purple!!!! Yes, sailing today was no bueno, our race was cancelled. Hoping to sail tomorrow.

@LadyKSailing

3 күн бұрын

Enjoy! 😊

Love that color! Perfect for the islands. Get her back down there!

Fantastic job Tim! Lady K looks stunning! Beautiful color.

@LadyKSailing

2 күн бұрын

Thank you kindly

Great video which has given me confidence to tackle my boat paint project ... 🇬🇧

Well done. It is a daunting task to paint a boat for sure. I personally prefer spraying because you use less paint and get much better results, but not everyone can do this.

Weeee Doggie You aced it Tim... Lots of work but know you can say Wham A Jam A~ Let's go sailing...

Wow, the paint job looks great. Nice vibrant colour choices. 👌🏼

@LadyKSailing

4 күн бұрын

Thank you! Cheers!

Purplicous! Looks great, man. Love the turtles.

@LadyKSailing

2 күн бұрын

Thanks!

I’m in the UK and I painted my boat at the time with ordinary Dulox house paint, it looked great, it still looked great 18 months later when I sold it. It lived in Poole quay on the river Tamar, definitely salt water.

! tip I would give, is to stray soapy water on the boat, before placing the vinyl stickers. this makes getting air bubbles out, so much easier

@LadyKSailing

4 күн бұрын

Thank you for the advice!

Looks good sir! Good tips, liked and added to a Playlist for when I take on this project. Fair winds skipper!

@LadyKSailing

4 күн бұрын

Awesome, thank you!

She came out beautiful! Great job!

@LadyKSailing

4 күн бұрын

Thank you! 😊

Now this is what we all need, (knowledge) and the will to do it yourself, just a tip when I paint I try to tint my undercoat if posable to a light top coat color when I know I will only do one top coat. But I love the black bottom and the boat looks amassing, we done Tim,

@LadyKSailing

4 күн бұрын

Thank you!

Nailed it again Tim! Great video!!!

@LadyKSailing

2 күн бұрын

Glad you enjoyed it!

Glad that guy said it’s green for the colorblind people. Looks great Tim!

Beautiful! Well done. Good video too.

@LadyKSailing

4 күн бұрын

Thank you very much!

A lot of work. Nice job, she looks great. Boy, that hour travel sucks! My garage is a mess as well twice a year, launch and haul out. Fortunately the house is 3 km from the boat, however, I'm always "out of time as well". Again, well done, you worked hard.

@LadyKSailing

2 күн бұрын

Thank you for watching!

Awesome look. Wow I love that green color. Great job Tim. Congrats

@LadyKSailing

4 күн бұрын

Thanks so much!

Looks great!❤

@LadyKSailing

4 күн бұрын

Thank you! 😊

she looks splendid love the finish

@LadyKSailing

3 күн бұрын

Thanks so much!

Loved this Tim.

@LadyKSailing

3 күн бұрын

Thanks for watching!

Nice job. Looks great!!

@LadyKSailing

3 күн бұрын

Thanks!

That looks great Tim!

@LadyKSailing

3 күн бұрын

Thanks 👍

What a great video!and im very impressed with the painting what a great job!

@LadyKSailing

4 күн бұрын

Thanks for watching!

Love the new color Tim, you did a great job.

@LadyKSailing

4 күн бұрын

Thanks so much!

Looks great!

@LadyKSailing

4 күн бұрын

Thanks!

Looks great, thank you for sharing!

@LadyKSailing

4 күн бұрын

Thanks for watching!

Smartest looking boat in the lot

Well done Tim!

@LadyKSailing

3 күн бұрын

Thanks!

For power tools, I favor Makita the most, followed by Milwaukee and Dewalt, which are both superb. . . . . Hook and loop sanding pads can be obtained in 40 grit. ALWAY wash and scrub new roller sleeves and chip brushes because they will have stray fibers from the factory. Make sure to have plenty of rags and NO DIRTY LIPS on paint cans. Clean as you go and when you put the top back on the top of the can and the groove in the lid must be clean. Appl first coats of primer and paint as thinly as possible, with subsequent coats getting thicker so they will expand more than lower coats when it gets hot. It says on the can you can repaint in 24 hours, but you're better waiting longer, days longer.

Great job Sir!

@LadyKSailing

4 күн бұрын

Thank you kindly!

As a woodworker, 3M Cubitron sandpaper is the best. A bit more expensive, but with wood, you save time and go thru less sandpaper. Plus it’s a net so there’s no holes to line up. Is it better sanding a boat than cheap sandpaper? My money is on the Cubitron.

@davidfinney6855

4 күн бұрын

Hook up your shop vac to that sander. Your sandpaper and lungs will last longer.

Looks good!

@LadyKSailing

4 күн бұрын

Thanks so much!

Looking great

@LadyKSailing

3 күн бұрын

Thank you! Cheers!

good job on the paint

Love this guys show , I’m doing all the homework I can to learn about sailing , bought a 43’ boat in Titusville off Craigslist for 10k Went down a month ago for two weeks and (long story short) got the motor running and anchor working . I want to take it out on the ICW but now it’s hurricane , hoping to maybe sell mine later and get a final one in three years to “retire “ on , - much love

@LadyKSailing

3 күн бұрын

You can do it!

Looks nice!

@LadyKSailing

3 күн бұрын

Thanks!

nice job - I love the colour!!

@LadyKSailing

4 күн бұрын

Thank you! Cheers!

Nice work. I like the graphics 👍

@LadyKSailing

4 күн бұрын

Thank you 👍

good job😀😀😀

Loving it

@LadyKSailing

3 күн бұрын

Thanks!

Good Job Tim

@LadyKSailing

4 күн бұрын

Thank you!

Good job Tim!

@LadyKSailing

2 күн бұрын

Thanks!

Boat looks great, I really like the color

@LadyKSailing

4 күн бұрын

Thanks 👍

OMG, those colors are popping awesome and i L.O.V.E. the Turtle!!!! Your Boat looks so neat!!! 🥰😍🤩💜💙💚🐢

@LadyKSailing

4 күн бұрын

Yay! Thank you!

Tim, that color was the color of our 1st sailboat Morgan 24. She is beautiful! Really nice job and good to know about the sander to use.👍 Happy Sailing ⛵

@LadyKSailing

4 күн бұрын

Thanks so much for watching!

Nice job ❤

@LadyKSailing

4 күн бұрын

Thanks 😆

Looks great Tim. Never used Petit but looks like it came out great. After having sanded and repainted my deck 2 years ago and the bottom this year I’ll echo the amount of sanding needed….you’re never quite prepared for how much. lol. I used the same dewalt sander and I’m convinced it’s indestructible. I couldn’t believe the abuse it took. I’ll also echo the epoxy kit as I have one too having done 2 deck repairs and it’s a must. I used Total Boat Total Fair vs the watertight and was great. I echo the sanding pads and paint swirlie mixer from Amazon. Great video Tim and all of your suggestions are really helpful. Anyone thinking about doing it should just do it. It’s not that hard just takes time. You’ll be proud of the results and save a pile of money!

@LadyKSailing

3 күн бұрын

Thanks so much for watching!

OhhO HOhoo man.. That's looking really sweet. Very nice, Tim. Very niiice..

@LadyKSailing

4 күн бұрын

Thanks 👍

I LOVE it!! Kudos

@LadyKSailing

4 күн бұрын

Thanks!

Important to note: DO NOT mix polyester resin in a solo cup… tried this and after a few minutes the bottom of the solo cup dissolved and had to deal with the subsequent mess. Cheers!

@LadyKSailing

5 сағат бұрын

Thanks for the tip!

I need to paint my Catalina 25 this fall. She has been in the water for 2 years… time to get dirty. Maybe orange will be the new hotness!

Grind off the tip of the spade bit, can’t use the bit as a drill after, but it’s a perfect mixing bit.

@LadyKSailing

3 күн бұрын

Ok thanks!

That's basically the same color as my 67 Mariner, came out good, love the turtles!

She's looking good Tim.

@LadyKSailing

4 күн бұрын

Thanks!

I've used paint rollers, and telescoping extensions for my paint rollers. But the last time I put on bottom paint I cut off a bit of broom handle to make a 14" extension for my paint roller. Even the shortest telescoping extension is too long and too bulky, when I'm down on my back under the boat, but the unextended roller just doesn't quite reach. Just a simple modest extension can make things easier.

@LadyKSailing

4 күн бұрын

Good idea!

boat is looking great man

@LadyKSailing

4 күн бұрын

Thanks!

Porter cable random orbital sander, 6". Model 7336 (new is 7346). Variable 6 speed gentle or powerful. Handle can be used on either side or not at all. Buy the vacuum kit so a shopvac will suck up the dust as you sand. Used on Ebay is fine as mine has done not just a repaint, but the bottom and many projects (indestructible). New is a 7346, but do they make them like they use to? Tipping did make it smooth and glossy......

Good color combo! I Would recommend a clear coat, will protect the orange peel from blistering and the vinyl corners from lifting

@LadyKSailing

4 күн бұрын

Thanks for the idea!

Personally, not the colours I would choose.. (Orange or Yellow with Flat black would be mine) but it looks like it turned out pretty well! Meanwhile, my white boat will stay white, because no time!

GREAT!

@LadyKSailing

3 күн бұрын

Thanks!

I love to see a truck getting really used. Im going to miss my tacoma when i sell it, but my boat is getting new thru-hulls and bottom paint!

Nice!🤙

@LadyKSailing

4 күн бұрын

Thanks! 😁

The colour's are interesting

Nice Ship My Guy

Nice

one brand that I always recommend, cheap and really great! Is Wesco! Give a try on this brand when you have opportunity

Glad you didn't paint the topsides black that's nothing but trouble south , painting is painting as you mentioned , if that's your job it is still a job if it's your boat it's a longer job 🙂

Looks great. The link for a consult doesn't seem to be working and was wondering how we can get I touch? Sent a pm.

color ooks like the jimmy buffett surfari 50. i saw it in sag harbor a couple of years ago

Well everyone will know who owns that boat . One thing I have heard is white colour boats are cooler in the summer sun

Awesome tips and great color scheme! Will the registration numbers fit above the turtles?!

@LadyKSailing

4 күн бұрын

It should

❤❤❤

Could have guessed you would be the type of guy to lower a Z71, but all kidding aside great job lady k is looking sharp bud!

@LadyKSailing

4 күн бұрын

🤣

Super basic question for painting, sanding, even for just cleaning a hull. How do you get even results with the hull in contact with supports? Do you have to get the boat hoisted into different positions after each round of work so you can get to the contact points that you couldn’t reach before?

@LadyKSailing

Күн бұрын

If you notice- those little metal contact points are only touching the black bottom paint- not the blue sides of the boat. I painted the bottom with black ablative bottom paint (separately) - did the best I could to fill in around the metal stands - then when the boat is lifted to go in the water, you can just dab a little on those spots- it really doesn’t make much of a difference

I guess this is a little late. But if it's warmer than the 72 degrees could have thinned your paint a little more. I've painted the same product at 90 degrees. You'd have to add thinner as needed in roller pan as the heat reduces your paint the longer it sits in the pan. Then no orange peel. She looks like a new boat.

@LadyKSailing

3 күн бұрын

Thanks for the tips!

Man, I told you that all you had to do was just do it and everyone would love it! Great job, Tim!

@LadyKSailing

4 күн бұрын

Yes! Thank you!

Good to get all the info but idk about those colors man.

Great job! What kind of bottom paint did you use? Hard or soft.

@LadyKSailing

4 күн бұрын

Always soft ablative. Love it for the ease of ownership.

I like the color a lot, what happened with the nicks in the paint you can see above the decal at 12:55

@LadyKSailing

4 күн бұрын

Those imperfections have been there a long long time. I just didn't bother filling them. Should have

For us colour challenged people what actual green colour is it and who did the decal and lettering? Thanks the job turned out looking very professional.

@LadyKSailing

4 күн бұрын

Thanks! The colour is called seafoam, the decals were made by a local company called Impact Graphics and signs

Purple and green bootline ?

Absolutely worth doing this process if you enjoy it. Otherwise you are way better off hiring someone to do it and spend the same time working over time.

There's mastercraft logo's on some of the epoxy... you get them at Canadian Tire?... for context, i'm in Quebec.

@LadyKSailing

2 күн бұрын

Yup! 😎

Hello I have 2 questions. Where is Grenada exactly and where are you right now? I got a post Reddit saying there is a Hurricane there.

@LadyKSailing

2 күн бұрын

Grenada is in the Caribbean and I am currently sailing in Canada on the Great Lakes

Looks more than good enough. I have a question about IOR boat classes, such as quarter-ton, half-ton, three-quarter ton, and on. I wonder what these ratings were based on. They seem tho have no direct dimensional connection to the actual boat size or proportions. My working theory is that these ratings are based on likely crew weight. A quarter-tonner, for example, is like to have three to four crew members on race day. If I go by the old assumption that the average weight per crew member is roughly 150 lbs. The numbers seem to check out. A half-tonner would then have a crew of five to seven members. Does this make any sense to you?

@LadyKSailing

4 күн бұрын

Sure does. One many boats it had to do with crew weight. We should do an episode on this and see if we can find and old timer that was involved back in the 70s!

I'm hoping this isnt a really stupid question, but: how'd you paint the bits under the stands?

@LadyKSailing

4 күн бұрын

No such thing as a stupid question 😊 - if you notice the stands are under the bottom- where I painted with black ablative paint- you can sort of get under them- very carefully! 😎

@martinmacdonald

4 күн бұрын

@@LadyKSailing thank you! Great job btw

@hannesnel5414

4 күн бұрын

@@martinmacdonald just have a bit ready when they lift her and touch up, give it 30mins to dry and should be good

My garage is a disaster too, but I don't paint boats...

@LadyKSailing

4 күн бұрын

🤣

How can I write a little ditty for your magazine? I am a stand up comedian living on a 45ft sailboat with my husband.

@LadyKSailing

3 күн бұрын

www.practical-sailor.com/apply

I scraped then sanded 20 years of hard blue bottom paint off a mid '80s 36 ft boat. My shoulders ached. Watching the first part of your video the pain came back. With the top sides: and then some. It is a big job.

Not going to lie, when I saw the still picture, I thought you had wrapped the boat instead of painting it.

@LadyKSailing

3 күн бұрын

🤣

Good job. To me, painting and pain in the ass doing it are of same word origin.

@LadyKSailing

4 күн бұрын

😂