Certified. Stupid.

@narsakucanada154

11 ай бұрын

A few years ago I repented to God then begged for help, "I was until then an Atheist." I then had a dream of Jesus coming before God and he spoke of the Tabernacle in perfect context, "A word I didn't know existed.", and what I felt from Jesus when I held him was unlike anything I've ever felt before - A lifetime of Love every second - It brought me to sobbing and it changed my life, forever. I've had other experiences since, "Several witnessed", one was seeing a bright orb of light pass across my face in the dark, hours before a major surgery the second I gave up in my heart. Know that God and Jesus ARE real and that they Love us deeply. Let go of your hatred and Imagine yourself holding the people who've hurt you. Tell them you Love them. Always have hope, I believe that prayer, following God's laws & Love is the answer, and through that, Truly becoming humble, merciful, welcoming, giving, gentle, respectful and forgiving, To All.

@serenity1378

11 ай бұрын

@@narsakucanada154 A few years ago I accepted Lucifer into my heart. Until then I was "Hellenic Polytheist". When walking home from the store, I felt both Hestia, the ancient Greek goddess of the hearth, and Lucifer, the goddess of rebellion, encircle my soul with their flames. Their warmth and strength were unlike anything I had ever felt. It was as if I had two divine mothers, one Above, in Olympus, and one Below, in Hell, each offering a different guiding hand, each with their own lessons to teach. I knew my soul was safe and that my future was bright. Know that Lucifer IS real, and she loves us so much she turned on her father for us. Let go of your brainwashing and embrace Her and Her flame. Understand that where Jehovah demands obedience and cruelty, all Lucifer requests is for you to be the best you that you can be, even if it means straying from her Light as the Lightbringer. Always have determination. I believe that by fighting tyranny in this world and the next, we can finally rid ourselves of oppressive, abusive institutions and live happy, free lives. Instead of proselytizing to others who don't need to hear it.

@mwk1

11 ай бұрын

*GET IN!*

@goku445

11 ай бұрын

The quality of your videos is increasing everytime. How can you do it?

@andrewsadach3194

10 ай бұрын

This is literally just an orange pi on a chip with RetroPie OS.

Genuinely - and I'm sure it's been said before, but - genuinely appreciate you leaving mistakes in the videos. So often I feel disheartened to try new things because the videos I see cut out mistakes or are of people who are already experts and I feel like I can't reach that level. When you let us see the times you mess up, it shows us that it's normal, it's part of any hobby, any learning journey, and makes it way less stressful to risk "failure".

@stefang8213

11 ай бұрын

Well said!

@74bobby

10 ай бұрын

I agree

@erinbuck129

10 ай бұрын

Came to the comments to say the same. Really makes learning repair feel more approachable.

@davenunyabusiness4893

10 ай бұрын

it's what makes the video fun to me

Nice work Steve. I think you need a "Days Worked Since Last Melted Plastic:" counter. You were on a great run!😆👍

@StezStixFix

11 ай бұрын

🤣 that is an excellent idea! 👏 I'm doing it!

@chrisj2848

11 ай бұрын

@@StezStixFix Awesome!

@MarioManTV

5 ай бұрын

And henceforth a channel staple was born!

@SimonLeeds

3 ай бұрын

I now know where Dave and the counter came from after about 50 or more videos in the past week. 😂

@sdrrshock5594

3 ай бұрын

@@SimonLeedswhere did Dave come from? I have just started watching

Sorry Steve but I have to admit, I laughed out loud when you snapped those pliers onto that poor little HDMI connector 🤣😂😅😁😆

I learned some important things from this video: first, have patience. Second, never yeet your controller.

Yea... been saying "Solid" when I try to repair things. What got me curious is at 12:24 it shows a wonky zero resistor touching 2 pads at the same time.

@RainUnderscore1

11 ай бұрын

Yup, taught I was crazy for a second, decided to check comments instead of rewinding and there it is :D

I have one of these, it was worth every penny. Perfect bedside emulation system, does up to Dreamcast games (almost) perfectly. Great job on this one, Stez! For $50 approx. you scored well.

i felt the pain, the disappointment, the burn and joy and happiness thanks for the smiles you gave me

My favourite is when something works and Steve goes - "Get in there!"

Don't know why, but your videos just relax me. I enjoy them very much! 😮😅 Cheers! Have a nice weekend 🍻

Well done sir, and the music production is getting insane! ❤🎉

@StezStixFix

11 ай бұрын

😍 thanks MGN! I'm trying to get better! 😬

Putting flux on your solder wick can help with those tough legs and hard to reach spots 👍

@BenRush

11 ай бұрын

....now when you say "legs and hard to reach spots"....

@nwr99nwr99

11 ай бұрын

​@@BenRushnever confuse your 'solder wick' with your 'Hampton wick' !

That's some "outstanding" quality control coming out of the factory like that. 😀

@ItsMrAssholeToYou

11 ай бұрын

Quality craftsmanship _does_ exist in China, but it comes down to the individual taking pride in their work, as culturally it's shortcuts and facades that's rewarded. By the point of mass-production that something like this represents, forget it. If it's not contract work for a foreign company that's doing their own QC, it's pure dice-roll, with not the best odds.

The dubstep style rap today was amazing.

I am not techie and I don't fix anything but I tune in to your videos everyday after work like a kid on saturday morning cartoons! Very entertaining and I'm fascinated with your skill. If you sell the things you fix I would like to know where to find it!

Great video. Man the rap and puns were on point today. Loads of Jeffs😂 Really loving the HD capture of the games also.

GREAT JOB!!! That was unexpected!!! You have NEVER let me down when it comes to making my day! Thank you! :)

Keep the videos coming, especially those deep dive troubleshooting ones as frustrating as they can be. I’m a beginner in the field and have learned more from your videos than school and my job. You’re doing awesome👍🏻

The flows and cadence of your rap was unparalleled my friend

Judging by the lack of solder it's a safe bet it started to glitch out and someone decided to start hamfisting the HDMI cord until it finally snapped what little connection it had to the board. Good call and good repair!

You make my sunday mornings great, i love it when you make little mistakes. Great work steve

Love these clips not only funny but learn a good bit. keep them coming :)

Always fun watching your repair.

Well done bro ! The music is just great also :) Have a good summer Steve !

@StezStixFix

11 ай бұрын

Thanks Brunako! You too! 🌞

@BrunakoPAO

11 ай бұрын

@@StezStixFix Thank you :)

I absolutely love watching your videos and how calm you are when you do things and when you took it apart and noticed the part stuck to the back of it, you just looked with a "sigh" look and still carried on fixing it. I think "Stupid" at the end for that game was definitely appropriate :D

You see Steve, it's like this: I know that you know that i click the "thumbs-up-button" before even watching the new video, which itself is an event that doesn't occur often enough. So i also happen to know, that you're thinking about doing more videos which is an idea that i wanted to greatly compliment you on. Thanks for the vids. And Happy Birthday - you're now a fulltime creator. See you in tomorrows video. thankfully - me.

Great video Steve, fun and entertaining as always!

@StezStixFix

11 ай бұрын

Thanks John! 😍

So many dad-jokes in this episode, brilliant work as always!

I like the fails on the way to Fix proving it doesn’t always go perfectly. Keep it up .

That beat was pretty dang wikked!!! And you are actually REALLY GOOD and puttin all the names in and making it work (for the most part) - the ONLY issue I have EVER noticed with ANY of your rhymes is that THIS ONE'S vocals were just a little too quiet for all that was going on in the track, but with the lyrics on screen it's easy to follow - but I have to say you really do have some talent!!! :D

I absolutely love the one more time reference!!! Daft punk is the best. Love your raps in every video, by the way, Thank you for all that you do.

I look at your videos as a german electrical engineer, your videos are nice for my sleeptime :D - great work!

Hi Steve, love the channel. In the video you said you were going to hold the HDMI port to the board with pliers. You didn't need to do it, but I have a suggestions if you ever do need to use that option. If you have one take an alligator clip and add some heat shrink to the teeth. It will hold the part down without damaging anything.

love the vids, respect the flow........love to see a tv repair or monitor in the future

Love the Jam this time, you rattled my kitchenwares with style son!

Once again, Steve, you never sieze to entertain with your dry sense of humour, say hi to dave for me🤪 your sub from the land down under 😊

Seriously, you're the best at what you do. Keep up the amazing work. :D

I love these videos they make me want to repair things

It would change my life to have this man's patience

Watching from Kentucky and learning alot thanks 😊

Nicely done Steve!

Great win ! Thanks for video !

am sure its been said but to me any way your so genuine the good with the bad and this community are great im learning lots so interesting thanks for doing what you do we sure are a throw away society amazing what can be fixed

Damn that Patreon went hard Been loving those keep it up!

Your videos are so relatable due to the very familiar oversights. Your reaction to finding that loose trace causing the 'Jeffs' is comic genius. PS if you're stuck for a grip, add an elastic band to some pliers.

Great job as usual! 10/10 music in this too!

Your beats have become good as hell!

Stupid torn off pad. Had fun as always watching you bring back to life another thing. And I've come to learn to have patience with waiting for tech to come to life. Im a fan of what Alton Brown said in his show Good Eats. "Your patience will be rewarded." So true.

@StezStixFix

11 ай бұрын

Thanks Sorakat! Yeah, that's very true! 😊

Power has been out for 14 hours, on mobile hotspot and power bank. Steve for the win. I’m also not giving up until I learn the secret of pop up bear.

@nemesis2264

11 ай бұрын

That is not a bear it's Gordon the Gopher.

@I_SuperHiro_I

11 ай бұрын

@@nemesis2264success lol!

It’s shockingly stupid how fast I click your videos when they show on my feed 😂

I usually just squeeze my HDMI Clasp back together and then solder along the join so they stay tight. Nice fix buddy!

looking good Steve, cheers from Chile

Nice work Steve!!!

1:15 Mmmmm Denon 2:02 BARS ! 14:35 The bird escaped? (top left)

Awesome repair and device,so many games and consoles to choose from.💯👌🏻

Gangsta repairs. Fire bars 🔥

Great Video Thanks Just found you last week!! Really wanted to see if that thing was worth a buy!!

Great choice of closing song, never go wrong with a little bit of daft punk

@StezStixFix

11 ай бұрын

Absolutely! 😍

every video comes with a banging tune a well :) Some serious lyrics sir!

God, this makes me feel so much better about myself and the little mistakes I make when working on shit.

Good stuff as always👍

I love your content Mate! Cheers 🍻

Another great job....i enjoy your videos

nice video, as always. I appreciate you also including your mistakes

Did they solder on that HDMI port, or did they GLUE it on?

I was talking to my screen the whole time, as if you could hear me...but I was saying not to put the wire underneath like a trace. That, and the big dollop of solder mask you put under there lifts the HDMI port up and doesn't allow the pins to sit flush with the board. It's so much easier to put the port on the board first, THEN run a bodge wire on top. Of course I'm commenting before I've watched the whole video 😆 So now I get to find out what happens in the exiting conclusion! Love your stuff. I know how difficult this stuff is, although I haven't done nearly as much tiny SMD stuff as you have.

Good fix, having just replaced a micro USB port on a free Bluetooth speaker, I really hate these tiny connectors, especially as not having a hot air system or microscope. I used a Dremel to make a tiny bit for my soldering iron, but still struggled with solder bridges, but got there in the end 😂

Is it just me, or do portions of the sample music on the rap sound like the old 'Protect and survive' public information films? Awesome video as always Steve. Keep up the good work.

the beat at 2:00 is so deep !

Great fix Steve rumour has it that Steve is still playing Barbie Model 😊

love you channel, great job

Hey Steve, great video as usual. This little thingy runs EmuELEC I think (a Linux Dist.) - it's likely why it takes some time to boot. Patience indeed :). Stay awesome!

@narsakucanada154

11 ай бұрын

A few years ago I repented to God then begged for help, "I was until then an Atheist." I then had a dream of Jesus coming before God and he spoke of the Tabernacle in perfect context, "A word I didn't know existed.", and what I felt from Jesus when I held him was unlike anything I've ever felt before - A lifetime of Love every second - It brought me to sobbing and it changed my life, forever. I've had other experiences since, "Several witnessed", one was seeing a bright orb of light pass across my face in the dark, hours before a major surgery the second I gave up in my heart. Know that God and Jesus ARE real and that they Love us deeply. Let go of your hatred and Imagine yourself holding the people who've hurt you. Tell them you Love them. Always have hope, I believe that prayer, following God's laws & Love is the answer, and through that, Truly becoming humble, merciful, welcoming, giving, gentle, respectful and forgiving, To All.

YO THAT BEAT WAS SLAMMIN

Ace vid. Thank you.

Hi Steve 🙂 New subscriber here and God help me , can't stop watching your stuff ! 😁

Just going to say it. Loved the outro tune this week. ❤

10:45 Steve: "Maybe I've just completely wasted my time." Me (looking at rest of the runtime): "Probably..."

I have started saying "solid" in a deep voice when I fix stuff now and I blame you!

@0.03 My Saturday has greatly improved!

This Rap was really good. hit hard. Keep up the music!

One of the best raps you did!

Well done ❤🎉

I'm betting it came from the factory properly soldered, but the problem was that they had that board made for a slightly different HDMI port. One with the pads slightly offset. It's close enough, but the solder over all wasn't making enough of a mechanical connection, so it just ripped off the pads. It's amazing that only one pad came up off the board. Also, using solder mask on both sides of the wire to keep it in place is something I'll have to keep in mind. Silly simple idea, but I've just never though of doing that before.

@lookitskazzy

11 ай бұрын

Definitely got that solder mask trick from Northridge Fix ;) Going to guess that unleaded solder didn't help any with the pins all coming loose. Bad QA for low quality products... seen it a million times.

I'm going to have to try and find one of those things, I love the old retro games.

A friend of mine showed me a trick which has sorta revolutionized how I do port replacements. Basically what you can do is get a tiny drill (I payed like 5£ for 10 of them - mine are 0.5mm) and use a small dremel/drilling machine to drill a tiny hole in the edger of the "mounting feet" or whatever the correct English translation is. The put a hard piece of steel wire the same thickness as the drill trough the holes when it's mounted on the board. When it's soldered the small piece of wire now keeps everything secured - even if someone rips fairly hard at the port. Have yet to see a port which has been fitted in this way fail.

"This is interesting...or is it" brilliant 😆 😂

That tune you rapped to was mad what it called please mate 😄🤣🤣🤣🏆🏆

@12:24 when you turn the board there is a 0 Ohm resistor crocked over what looks like a spot for a transistor. I that from factory because it doesn't look like it flew there from the heat gun (The solder is to "solid"). If it is factory it just looks super weird

The rap was GLORIOUS

Great fix. A suggestion, when drag soldering use the much larger tip (like at 10:01, you need to overlap at least two pins to reduce the chance of shorts) with a ton of flux and as light a pressure as possible. Yes, the stray pad didn't help. Some pre-tinning of the connector pins beforehand (looks as though that was never done in production) and straighten the connector before fitting to avoid stress (personal, physical and viewer).

@Those_Weirdos

11 ай бұрын

What video did you watch? At various times throughout the video, around 12:20 or so especially, you see he's dislodged components. You can see a 0 ohm resistor that's rotated and barely on its pads, for example. This was a messy video. Don't call bad fixes great.

@ralphj4012

11 ай бұрын

@@Those_Weirdos I tend not to be so ruthless, as I'm sure others will be. The 0 Ohm resistor appears to be a jumper across two pads of what may have originally been a transistor or similar, and may have been installed that way during manufacture

Oh gosh the feeling of nostalgia at the Barbie game... My sister made me play that whenever we went to my grandmother's house as kids...

Best Day of the week

Most SOLID video we`ve had.

Love it, best surprise face ever :D

I had to pay to use a Jeff recently. Thanks. You’ve corrupted my limited vocabulary Steve. ;)

Nice one mate. That HDMI port did look a bit Keiron (Dyer)

woohoo finally a video from uncle steve

Best video ever! I have watched the full video.. whatcha mean?

15:33 should of been your Thumbnail for this 🤭🤭🤣

Good Chinese craftmanship right there... Been meaning to ask, where do you source your background musics from?

@StezStixFix

11 ай бұрын

I get most of it from Epedemic Sound. It's a subscription based thingy, but they have some cracking tracks!