As someone that made a bunch of 3d MTG cards, this is very interesting. I'm very jealous of your laser cut top-deck plastic and your aligning tool. Doing it by hand is much more work, hahaha Amazing job! I understand the appeal of these made in a quicker way, so I'll refrain from "things that require too much detail", but here are some suggestions: 1) cover the outsides so you don't see the layers. In your case, since you are using foam to bulk them (very clever, btw), I'm not sure what paint would be best. Probably something like acrylic, since it can go on thicker. 2) when you have dark images, you can run a fine-liner ink pen on the edges you just cut to paint it black. It helps with masking the cut edges and imperfections 3) As you probably won't have time to cover-paint the backgrounds, one other thing you can do is cut away "repeated" layer images. For example, in the Haunter card, his left hand in the foreground. If, in the layer below it (the one with the main body) you cut away the art of the left hand, when you place the top layer (the one with only the left hand) it will look even more 3D and it won't have the repeating misaligned art right below it. You could do something similar for the Charmander's tail and body. Overall, this was and absolute success! Fantastic work! I love your use of foam to bulk the cards and the fact that you protected the cards with a plastic top deck layer. I started doing it for my counters and it makes it so much easier to manipulate the cards without worry.

@AarhgYouTube

2 жыл бұрын

I've seen a fair amount of 3D-ified Magic cards, so it was super cool to see Jazza figure out his own method for creating them. I agree with your suggestions! ...And I kind of hope Jazza catches the MTG bug at some point - perhaps along with the TTT crew!

@micaela711

2 жыл бұрын

My thought: the edges could be covered with a thin plastic film or even some resin, then painted

@Ultimatelol3DCards

2 жыл бұрын

Having made 3D card projects for years I agree with most of these. I myself and quite a few fellow artists use Gundam markers beside acrylic paint. They are wipeable for a short period but don't bleed into the cardboard. Making your edges at least black has proven to be the best investment of time vs results improvement to our experience as it also hides cut fraying and small errors. There are more advanced ways to make projects look Way better, but they probably don't suit this 'mass production' project.

@alexagallagher710

2 жыл бұрын

This guy has ideas , the pen on the edges is smart .

@robjones535

2 жыл бұрын

This is really amazing advice. This is why I love Jazza’s community, because it’s wholes and helpful. I really hope Jazza can see this.

Hey Jazza really hope you see this. A couple of tips I’ve seen that improves the quality of 3d cards is to run a black marker around the white edge of your cuts and to use those weird metal clay tools to make your pieces 3D by making them curved or folded. Like if you put the energy ball into a curved object and applied pressure it would create almost a semi spherical shape. Cheers love ya work

@eyalm867

2 жыл бұрын

On the thing with the energy ball, I'd also say attempt to cut out the symbol, and have that as a separate layer... that might make it more 3d...?!?!

@ConnorSinclairCavin

2 жыл бұрын

Even better than a black marker try a metallic silver or metallic white paint, it tends to make the edges fade into the art, or a milky semi clear with suspended holographics

@DizzyBonez

Жыл бұрын

Thank you for this tip!

@MikeHunt-lz2hq

3 ай бұрын

Those are called molding tools you can get a nice set from Wal-Mart or even harbor freight.

@g7rpl11

18 күн бұрын

@@ConnorSinclairCavin O

I think that for the energies you could use cabochons, those glass fish-eye thingies with a flat back. It would make them look more 3d and shiny with less cutting up and layering. Also to make everything more professional you could paint the sides of the cut outs black, and maybe paint over the area where the foreground objects will be placed on the backround layers, to enhance the 3d effect. I'm looking foward to see the whole deck!!

@brendantschappat1371

Жыл бұрын

Great ideas!

I love how MJ learned how to play into dad’s ego… Jazza: Which ones the best? MJ: All of them

@samoak123

Жыл бұрын

gotta cathem all

@pepegroda9609

Жыл бұрын

Did… did you just call jazza “dad”?

@geochonker9052

Жыл бұрын

A trick you have to know as a kid

I think finding a way to clean up the cut edges would really send these to the next level. Maybe by painting them either black or white, or just cutting them in a different way.

@StinkyHeXoR

2 жыл бұрын

Using a black sharpie on the edges will do the trick. Maybe black foam instead of white.

@lpsfankanr1

2 жыл бұрын

Also sanding the edges is a nice idea

@sega_sistarz

2 жыл бұрын

Hear hear

How about adding depth to the energy cards by adding a middle layer that is clear or acrylic and using that for the "glow" of the energy? Could open up the option of really blending the aura or adding sparks.

@nisai0714

2 жыл бұрын

I also saw how the darker/black bit in the middle could be placed further back than the orb itself. almost like a void or something

Making a deck would be really cool, but imagine the height of the deck. Shuffling the deck would be pain 😂😂🤣 But if you wanna make a full deck you could make the new Regigigas deck from astral radiance. The deck is busted and there’s no ultra rare in the deck, so you don’t have to cut valuable cards.

@17aaron7lol4

Жыл бұрын

I was thinking make the Regirock deck from XY ancient origins bc that deck has some cards that will look sick in 3D

@Narinjas

Жыл бұрын

I would say to not do it that way, make your own, learn 3D scan, and 3D paper effect, and use the sculpture and custom backgrounds, to make the ultimate realistic 3D card effect, without wasting money on pokemon cards.

@mustafadegerbilgec

Жыл бұрын

True

@bubblejuice6544

Жыл бұрын

Imagine having a holographic charizard 3d in ur deck, ultimate flex

@teamofone1219

Жыл бұрын

Also trying not to ruin them in the process.

Maybe you could try filling the gaps with resin (possibly colored) to give the cards more strength and more depth. The resin might also be able to hide the sharp edges of every layer

@lordnuminex5738

Жыл бұрын

That sounds like it could work but the budget might go up 😅. I'm looking to do this only for the main squeeze of the deck 😏.

I can see where that person was going with painting some of the background. I feel like certain cards - like charmander or the potion - would have looked a lot more 3D if I couldn't see the duplicates behind them. Might be worth experimenting with gluing the cards to foam before cutting them. That, and thinner layering material if possible.

@swagatikadash2099

2 жыл бұрын

yeah , but that would be a lot more work , he would hfta paint every single layer to get rid of the duplicates , lol imagine spending a whole month just to play pokemon cards

@SamuraiPipotchi

2 жыл бұрын

@@swagatikadash2099 Yeah, that's why I was thinking to glue the cards on foam before cutting. It wouldn't look as good as painting, but it would mask the duplicated areas

The only thing I can think off to improve them even further is to clean up the edges. You can now rather clearly see that it's multiple layers of card/foam stuck together if you look at the side edge of the card. Somehow covering that up with tape or paint or something would go a long way to making it look even more "real" and less "cards stuck together".

@uniwolfgamer1094

2 жыл бұрын

The good thing about the lazercut white layers, other than adding depth, is that unlike the prototypes; there's basically no gaps. Which is a big improvement imo.

@septimor32

2 жыл бұрын

Yeah! I was first thinking about electronic tape, but some good quality tape, neatly cut with a razor would also work!

@Impishartistry

2 жыл бұрын

I was thinking this too. Depending on how the cards take paint there could be "bleed" into the image and getting tape the exact width without overlapping the front would be difficult. But the foam is at least easy, just paint the same color as the surroundings or black in most cases! I love the clear protector idea tho!!

@alexz101

2 жыл бұрын

I wonder if he used resin in between the layers instead of the foam pieces if that may help and add new depth. Although they would be pretty heavy after that.

@Impishartistry

2 жыл бұрын

@@alexz101I'm worried about the weight of that too, but on the flip side it may be easier to pull off some of the visual effects of the energy cards

The fact that your son immediately said you could battle with them and loved all of them instantly made me really happy, hnnn-

@bobrobert3730

Жыл бұрын

What do you mean by that?

What a great art ive ever seen.. super cool 🤩🤩🤩

If you do want to make a full deck, you'll definitely need to make sure each card is the same thickness to make it harder to tell which card is which from the side.

@jowobo89

2 жыл бұрын

You'll also need to sort out some way of hiding the edges. The wear on a card can at times be a dead giveaway. Not to mention finding a way of shuffling it... I used to play TCGs with fully sleeved decks and even shuffling that was a bit of a nightmare.

@Elehaya

2 жыл бұрын

@@jowobo89 You can always shuffle them this way: put 5 cards aß a separate pile. Then you put the next five on top always starting from the right or the left. You do this until all of the cards are distributed evenly on the piles. Lastley you put all piles into one.

@Yuzuki1337

2 жыл бұрын

@@Elehaya Pile shuffling is not sufficiently random according to the competitive rules but who cares if it's just for fun :D Just thought I'd let you know :)

@doodledicemonsters

2 жыл бұрын

This

@AdleisioCefnforDolphin

2 жыл бұрын

@@Yuzuki1337 I know in Magic, there is no specific way your are required to shuffle, just as long as it is shuffled sufficiently enough that neither you nor your opponent know where the cards are, I can't speak to Pokemon though. So pile shuffling can be deterministic, the question becomes are you actually keeping track and generally it is recommended that your have your opponent cut the deck before play thus trying to add another element of removing any sort of set up the player may have been trying to create. Trying to side shuffle these would be impossible, so likely a good messy pile might be a good method for it, I think it is called a table shuffle.....

If you decide to make a full deck of 3d cards, you should make sure that they are all the same thickness that way there is less of a chance to know what card youre going to get before you pull it.

@magtu96

2 жыл бұрын

maybe he could put tape on the edges to cover the layers or paint can be an option.

@bradjones7491

2 жыл бұрын

you could never make them regulation the whole reason cards work is because they all weigh the same amount with an extremely small variance for holographic ink. Even if you made them look identical in thickness the number of cards used for each 3d effect would vastly change the weight of each card, and even the amount of card preserved from each layer could contribute to the weight.

@backonlazer791

2 жыл бұрын

@@bradjones7491 Yes, but they aren't making them tournament legal since that's impossible. The point is that you or the opponent shouldn't be able to tell what card you're going to pull next based on the thickness. Weight doesn't matter in this case.

@bradjones7491

2 жыл бұрын

@@backonlazer791 I mean I was replying to the guy who was talking about how the card owner would know what cards are coming up, and you could tell if one card is significantly heavier for example. obviously there's no way to make the tournament legal, but I don't even think you could make them standardized enough to be playable in any honest capacity. Obviously you could still play with them just for the laughs, but not in any serious way. Based on the thickness of just 3 cards you can immediately tell that it would be completely impossible to even play with them as to stack 60 would end up in a deck size that would be entirely impossible to even begin shuffling. Even double card thickness becomes very hard to work with. These cards look great but that's pretty much the limit of their value. Aside from maybe using a regular deck and then replacing the cards on the field as you play them.

@MichaelFrankNZ

2 жыл бұрын

@@bradjones7491 While it's true there would be a weight difference, I doubt it would be possible for anyone to reliably determine the weight difference between any of the 3D cards if they were all the same thickness. A single, unaltered card weighs 1.67 - 1.76 grams, one of those stacked 3D cards probably weighs at most 10 grams. If you could, by hand, tell the difference between 8 grams (maybe the power card) and 10 grams (the least cut up 3D card perhaps) I'd be very impressed.

combining the holos is great idea 😁

Soooo cool!!!! I would just flatten out and ink the edges

When Jazza realises he needs to make 2 decks of 60 cards to host a committed game ...

@asherhowell-hemby3875

Жыл бұрын

0:30

@Vanilla_The_Star_Bunny

Жыл бұрын

Imagine shuffling the deck ---

@NviusProducer

Жыл бұрын

💀

@TheTruth-ug5rw

Жыл бұрын

@@Vanilla_The_Star_Bunny imagine you got a paper-cut from it. 5 in 1..

@BurningLotuz

Жыл бұрын

120 cards... there are 151 Pokemon. Coincidence? I think not!

I would recommend probably going for a starter or trail deck. Just because they usually consist of multiple copies of cards/Pokémon and you get a bunch of energy along with it. So that would be quite useful compared to buying multiple packs and getting different ratio of cards/Pokémon.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

I think you only have a “normal” deck to draw from and have in your hand but once you want to play them, you switch them out for their 3D counter part

2 suggestions: 1. Darken the side edges of the card the white foam doesn’t work for me. Outside of the deck but also inside. Or buy black foam. 2. The layers further away have still the item in the front. With paint you can remove the item in front so the 3D effect will be more applicable!

@kaminister

2 жыл бұрын

Exactly ! And if removing the item perfectly takes too much time, covering it in black can look like shadows ^^

@TKDWN_YT

Жыл бұрын

For coherence, maybe yellow would work as a better colour (as it is the border around the back and front of the card)

I’ve never really been into Pokémon, much less Pokémon cards, but these videos are some of my favorites on Jazza’s channel!

@rnttreed

2 жыл бұрын

I agree. He did a great job

@indigogogoThatfloof

2 жыл бұрын

@Don't Read My Profile Photo i wont

@Narra0002

2 жыл бұрын

They’re fun

@SimpForPiano

2 жыл бұрын

Pokémon get it right

@fernasim

2 жыл бұрын

@@SimpForPiano Whoops, my bad!

Always interresting how people are so creative

Absolutely incredible love to see

There are Pokemon 3D artists who still pour resin over the Pokemon and bend and crease the Pokemon a bit and carve the background to make the 3D effect even better. You should try that too Jazza !

@leg1187

2 жыл бұрын

@@georgesteven7758 Hey everyone do not fall for this guy it's a scammer I promise ya!

If Jazza ever dives without ever dabbling, Imma start finding a way out of the simulation, cause clearly that's not real

@craniumsnumb

2 жыл бұрын

i thought the charmander and the butterfree was the dabble

@danielawesome36

2 жыл бұрын

@Don't Read My Profile Photo Okay, I won't.

@septimor32

2 жыл бұрын

@@craniumsnumb Indeed! @Neo II You need to wake up! We are missing you! The pokemon videos are not reality, your mom misses you! Remember that bike accident, you need to wake up!

@yumilopez9964

2 жыл бұрын

Sleep is like dabbling death right

@alexz101

2 жыл бұрын

@@yumilopez9964 🤣🤣🤣

I'd absolutely love to see these as a deck, and to see you actually play with them.

I simply love it!

I love everything that he does but when he shows to his kids how you can “destroy” something to make it another thing even more beautiful just makes me really happy :”3

Finally something I might be able to help with. You can gently curve and mould the card to get rid of the awkward flatness and cutting edges. You can also use silicon glue to get a beautiful transition between layers instead of the stepped look. Just the first one really elevates simple decoupage really easily. I hope this helps someone!

Those Cards Are Really Well Made

You are so creative I love your work you are so talented

Is there anyway to utilise a Cricut machine for neater edges? Ie, scan the images in and use the machine to cut??? Maybe just for the energy and items, to speed things along. Love the cards! :)

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

every single time Jazza makes something just inspires me in a way i cant explain, thanks to you i've been able to pursue my art career. Whoever's reading this i wish you a great life.

@dobrecovsci7720

2 жыл бұрын

Harosho chto ostalis tackie lydi.

@CreativeSteve69

2 жыл бұрын

thanks so much. hopefully you have a great life as well. Jazza is the main reason I changed from computer science and go for my art degree. Hes that inspirational. :D

@YllidTheLoonyDog

2 жыл бұрын

@Don't Read My Profile Photo k

a whole deck of these would be so cool!

so many things about this could be improved in obvious ways that were driving me nuts: 1. painting/sharpie-ing over the parts of the pokemon that would be visible in the background lair in black 2. coloring the edges of the pieces that have been cut black/the color of the pieces so they stand out a lot less than bright white 3. curling the edges of rounded parts slightly to lean morre into them being 3d 4. (this is the biggest one) layering parts of the pokemon on top of each other for depth. charmander's arm and haunter's back spikes/inner mouth were the biggest examples of this, butterfree i get you didn't have the materials for the wings definitely going to look into using foam and cutting thicker plastic car holders though. those are good ideas.

@australopithecus_fr1574

Жыл бұрын

🤓

suggestion for the energy balls: since you have the glass cover you could fill the inside with something to add to the effekt. I am thinking of glitter or sth similar. Great work they really look cool!

One of the video's you watched I remember that they lined the edges with a black marker to hide the white cut lines. Is has a cleaner finish and think it worked well.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

Full deck fo sho! These are dope!

@winsingchou

Жыл бұрын

Giveaway, Tranding card binder,50pcs, if you need, pls contact me.

Those are fantastic.

I love your willingness to try things that you aren’t an “expert” at. This is one of my favorite videos on your channel in a while. Love it!

Jazza always takes things to the next level, with his lovable chaotic personality-

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

That's impressive. Great job 👏

Honestly, the energy is my favorite

The last ones are great techicaly, but having a sides in some fitting to outline color like in Butterfree will do better for the 3D effect. Being able to see duplicates underneath destroyes the effect.

The patience need to have for this is outrageous, I commend you for this Jazza 😂

Each of these look really cool, that haunter though 🤌🏽

I hope he does a whole deck. I really love this one

make whole deck! great job!

These cards look amazing. I really love em. I think the only thing that you could do to improve them a little bit, is if the foam you use for padding the cards out was colored the same as the cards interior, so that even when looking at an angle, it would look like a lot more cards stacked together instead of different material.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

Jazza's content gives me the same joy that art attack gave me 20 years ago ❤❤❤!!!!!

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

I know the Haunter was probably harder to do, but the effect was SO GOOD. PLEASE do a deck that lets you flex those creative muscles with the body parts spacing. Personally, I'd vote for either water, due to the variety of background effects you could beautifully 3D-ize, or bug, due to their wicked proportions.

Wow those are kool 3d decks nice i would buy some and Good Luck and love the laser too congrats

As someone who's grown up with pokemon this is simply amazing to see! I love the idea of a whole deck to play with! I think one suggestion I would make is to paint the outside edges of the cards to hide the white of the spacing material. Also if you use a specific deck, you should use the Ancient Origin- Iron Tides deck! It's main pokemon is Metagross (the pokemon in my profile picture) it's a really cool, really powerful pokemon! It also happens to be my favorite pokemon 😁

Absolutely amazing work on these. Being a child of the 90's where the card game came out, I love these 3D cards that you've made.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

THAT LOOKS AWESOME! I want to do this now to my magic cards! Love it!

This is so cool! I wonder if you could take a scan of the card and then map out each of the "layers" on phototshop or something. Throw those into your laser cutter and have the LASER CUTTER do all of the cutouts for you?? SUPER crispy lines AND the only bit you have to do manually from there would be to assemble. It would also give you a way to dynamically preview each card to make sure you get the exact affect you're wanting ahead of doing anything to the physical card. I would LOVE a part 2 of this where you did more of the tech-y integration in the process. So cool!!

@westernbear2265

Жыл бұрын

I was thinking the same thing, but with a Cricut. It wouldn’t surprise me if the laser cutter would ignite the cards.

The easiest way to speed up the process is to digitize the whole deck & use your laser cutter to make all the layers. Then your job is simply to assemble the cards. It shouldn't take much time after you have ever cut designed.

I honestly just wanna see you do Primarina, I really feel she has great potential for 3d card.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

I would love a Cubone made card like this.!

Well done dude, that was pretty sick

Heck yeah, a whole deck of these would be absolutely nuts. I’m all for it

@FreightmareFTW

2 жыл бұрын

True but this world is only temporary. I would set your mind on what is going to be eternal. Make sure you are spending as much time as you can helping others and spreading the Gospel of Jesus while you are here so that you are ready to confront Jesus at the Bemaseat. If you are not a follower of Messiah I would highly recommend becoming one. Pray for God to intervene in your life and look for the motion of His hand. If you have any questions about scripture feel free to ask me

@eaterbattery

Жыл бұрын

@Savannah Praise our goat lord of darkness Satan and do unholy things such as handholding before marriage!

@kitosanimations

Жыл бұрын

@@FreightmareFTW i dont follow god i follow hfj one

Love your videos Jazza, you’re a big inspiration to me!!

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

Jazza that was a wonderful art piece! Love how you simplified the process for repeatability!

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

12:21 Your son is already prepared for the question, "which of your children is your favorite?".

This art is so awesome, whenever I watch Jazza I always get the urge to try new art forms. Half the time I don’t know what I’m doing and I see from past videos he doesn’t know what he’s doing either but he still has fun with it😂.

@georgesteven7758

2 жыл бұрын

🔝You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

If jazza makes a whole deck, this is gonna be my favorite project so far 😍 the only thing that could top it would be the same thing but with magic cards

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

Love this work

Awesome 3d Pokemon cards 😄

I’d of liked it if he tried to make it “3d” in back and front with his refined method. Not necessarily a deck but just one card. Perhaps his favorite.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

I'd also love to see more of the big box ones. Doesn't have to be a whole deck but they're so cool!

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

I want to see this so much, these are beautiful! I loved the process you went through

Thats amazing

First, read what oreol staking is, and then tell tales about mining and trading …

Love your videos jazza, they are so inspiring as i am an artist myself, thank you :)

@georgesteven7758

2 жыл бұрын

🔝You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

uuuhhhg the cut out frame that you fill in with the layers is such a good idea!! I can never get them perfectly aligned. I wonder if I can get something similar 3D printed.

You just gave me a great idea!! Thank You!

Im living for Jazza's smile when his son said "all of them" 🥺 12:21

@georgesteven7758

2 жыл бұрын

🔝You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆

I love those cards!! For the energy you could move the type symbol that’s inside the circle further to the front or back to make them more detailed. It could look really cool. Either way I love those Pokémon card videos

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

someone else on insta was doing this type of 3d thing too, but what they don't do is add the extra white layers, and every little thing that's already in the pokemon's card bg have it separate it and glue it again layer by layer, like this one in the vid but thinner and still has a pretty 3d look

it would take some setting up to make it happen, but I bet you could cut the artwork super cleanly and quickly with the laser cutter if you could line them up well enough. If the card can slot perfectly into the gap in the other cardboard that would be a great way to know exactly where the card will be on the laser cutter bed!

you might need 2 decks one to play with and then a seperate 3d model deck that you can pull out when you play a pokemon, putting an overlay to show energy and whatever else pokemon uses.

OMG! This came out so Awesome! i'd love to see an eletric deck! S2

Yo, this looks insane.

I really like these! The only improvement I feel you could realistically implement to make these shine is to paint in the lower layers to cover anything that is on the layer above. So painting over haunters hand on the lowers layers, painting over haunter completely on the background layer, etc.

@georgesteven7758

2 жыл бұрын

You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above....... 👆

Doing this fused with the acrylic layers box trick you learned before would likely make for an amazing effect as you could also add in transparent flowing energy effects

@catdust

2 жыл бұрын

wait this is brilliant! he can even use glitter-acrylic to simulate foil cards, or something that glows in the dark even

@ConnorSinclairCavin

2 жыл бұрын

@@catdust or reactant tints that show different fluorescence in different UV spectrums even too if he wanted, or that change color with uv interaction/heat/direct light. Lots of options, even small leaves/petals/stuff to match a background’s style or creeping vines, or smoke clouds

@catdust

2 жыл бұрын

@@ConnorSinclairCavin now i want to do this, anyways what's your favorite type? i happen to like ghost types

@ConnorSinclairCavin

2 жыл бұрын

@@catdust ghost and steel. Well technically i actually would probably say that the crystal types that were planned then ret-conned would have likely been my favorite with what little we know of them, however as it is definitely ghosts and steel. Was sad that no Rotom ever became ghost-steel, but at least we finally got Aegislash. Still waiting on basically all the best Eeveelutions tho… come on game creators, yall holdin out just because of the pure fan interaction fodder of them?

Makers Muse who concentrates on 3D models & printing would probably be interested in doing a collab around those 3D card molds. A number of people would like a template for those.

Wow you killed it great job

He might actually be the only person who made something like this, I might have to do the same thing with my cards soon 😂👍🔥

@justaguythatsbadateverythi2499

Жыл бұрын

Nah, TheJWittz has actually done it too! They uploaded a tutorial and all if you want another perspective on it! And same honestly

These are amazing, I would love to see more of them, (also the Haunter was my favorite.)

I definitely would love to see an entire deck of these

Keep making 3d cards jazza!!! Please 🙏 Thank you! 💜

Get used to it boys and girls, we are going to see the laser cutter evey video

@georgesteven7758

2 жыл бұрын

🔝You've been selected Among the shortlisted Winner's for the ongoing Giveaway text the Telegram ID above.......👆🎊

This is incredible!! I would absolutely LOVE to see a full deck of these!!

I liked the last 3 cards the most since of the thickness (without having air in between), you can securley play with them. Plus, the final touch of adding glass or plastic protection, genius!

lets go mate cant wait for the next episode!

Hi Jazza. I very much admire your work, art and your films. Me and my kids watch every new episode. This one inspired us to make similar cards from Lego Ninjago. My children are crazy about this. It turned out very well and I would like to thank you for the inspiration to creatively work with my children. :)

A way to shuffle these is a must! Assuming they are strong enough, I'm imagining a massive Plinko style machine. 🤣😂 Good luck with that one. Ideas to make it cheaper & sturdier: If you use layers of foam under each image in the same shape, then you may only need to use one or two cards instead of five. This way you don't have to spend as much $$ and it gives you a wider variety to choose from. Each foam backer would need to be the same depth as the layer of the image. So it would be: 1) Background 2) Layer of foam and image. 3) Two layers of foam and image. 4) Three layers of foam and image. Etcetera for however many layers you choose. Alternatively, cardboard or thin wood might also work. The full image backing should also make the cards sturdier, as would an exterior casing for each card. Setting a layer baseline for the cards will help keep them close to the same thickness. Using layers of resin or acrylic sheets could also be used, but this might get expensive, messy, take longer and or be harder to keep even.

that look awesome

For energy cards you should make the black part in the middle sunken in, might look cool

Cool

@firefoxmakesstuff618

2 жыл бұрын

I can’t believe I’m the first viewer

@raineseth5661

2 жыл бұрын

@@firefoxmakesstuff618 second (I think)

@CierraChau

2 жыл бұрын

@@firefoxmakesstuff618 no first commenter

@SoozeXD

2 жыл бұрын

Ur first

@CierraChau

2 жыл бұрын

@@firefoxmakesstuff618 and nice job at being first