I Made My Own Flipper Zero | DIY Flipper Zero With ESP32
Ғылым және технология
If you have been following electronics, gadgets, or tech in general, you probably have heard about Flipper Zero.
Flipper Zero is a device that can listen to, analyze and emulate different kinds of signals, but one of the features that I like the most about the gadget is its ability to listen and analyze Sub-GHz frequencies, or signals that use those frequencies.
I wanted to have that device, electronics is my hobby, so I did part of its functionality, I chose a couple of modules that I bought online and the amazing ESP32 board, also did an Android app that I use as an interface to the electronics.
The tests that I did can be found at the end of this youtube video.
I'm planning to put everything on a PCB board, and pack it inside of a package, so if you wanna see the progress, subscribe to my channel, by clicking on the link: bit.ly/3Qyv8pp 😀
Пікірлер: 69
Sell it as a kit... I'd buy it
@anonym3809
Ай бұрын
Donald Trump wants to hack the devices of Joe Biden...xd
I catch your comment in vanessa's channel , im from mexico, when i was in conalep we used to use the bradboard to simulate the injection system and safety systems in cars
It would be a way better with a screen on it. You can also add some rfid and nfc stuff with the pn532 module. And for the IR, i reccomend you to use the ys-irtm module, because it can recive and send ir signals all in one module. Nice work
@SlavkosHobbyChannel
11 ай бұрын
Thanks, great idea 👍
@SlavkosHobbyChannel
11 ай бұрын
@@spamzboi1237 Sure, I made a video about it. When I have more free time I will edit it and post it on my channel 😀
@SlavkosHobbyChannel
11 ай бұрын
@@spamzboi1237 Just the one I was talking about in the video.
hello !! which kind of library are you using to achieve this ? do you have the code somewhere ? :) I'm trying to build something similar but much simple only for cloning my parking key
Great work rsp 🤝🏻
@SlavkosHobbyChannel
11 ай бұрын
Thanks!
Nice Video mate ... from Indonesia
That’s good stuff brother
@SlavkosHobbyChannel
11 ай бұрын
Thank you brother!
I must honestly ask: how did you do it? After all, the chip architecture of the esp 32 and the CC1101 are very different. I tried to do the same project in the past, and I would love to know. It is very impressive.
@SlavkosHobbyChannel
11 ай бұрын
Thanks. I didn't use CC1101, I showed the module name in the video, I will make a video about the building process when I have more free time.
@treapymnm6519
10 ай бұрын
thank you very much !@@SlavkosHobbyChannel
@qwerty1423a
29 күн бұрын
@@SlavkosHobbyChannel hello slavkos, please tell me where is the building tutorial video? i haven't found it on your channel, give me a link to it please, thanks!
hey, can you please give me the schematics that you use in this video? i want to put the things on the breadboard first and i need the schematics that you use, please 🙏
Hi Slavko! At first a really cool channel! But I have issues with compiling the code I found regarding your 433mhz_cloner. Is it dependent on the esp Board? The error occurs in the step "Linking everything together..." Do you have any idea and could you help me with this? I have an ESP32-WROOMER-32 board.
@SlavkosHobbyChannel
Ай бұрын
Hi! Thanks, send the log here, so I can see the error.
@SlavkosHobbyChannel
Ай бұрын
Are you able to upload another code, lets say a blink example, to your board?
❤❤❤
aren't these systems on rolling codes? My understanding is they'll change every time or almost every time. How does it work with those?
@SlavkosHobbyChannel
11 ай бұрын
The one that I am testing is a fixed code. I wouldn't try this method on a rolling code remote, cuz, sometimes the car's module or some other equipment module desyncs the original remote, and it can be a problem without knowledge and equipment. So we need to use the method carefully 😀
very good!
@SlavkosHobbyChannel
11 ай бұрын
Thanks!
Hey , thank you for making this video. Ia. highly interested in building gadgets, but am super scared of soldering, because I suck so bad.
@SlavkosHobbyChannel
10 ай бұрын
Keep trying you're gonna master it! 😀
@GamesenseNoName
4 ай бұрын
5 months later. Tip for soldering. Get some flux it helps (from someone who solders without flux) and just test out a little while soldering too. A little with randon wires you have laying around perhaps. Also a helping hand as they are called can be nice too 😊 also i recommend some heat shrink tubing. (I currently purely use electrical tape and it can become hell even after this much time of having done it
make me one I'll support your work
How to make this explain ezay❤
Nice bro
@SlavkosHobbyChannel
10 ай бұрын
Thanks!
Would this work in the USA? Or do they use a different frequency?
@SlavkosHobbyChannel
8 ай бұрын
Most of the devices in the USA use 315mhz, so change the module that is gonna have that frequency, or add CC1101, that one supports them all.
Could you share application and source code ?
Nice one 👌👍 I need full video on it "how to make ........" And full program Can you please help me to make same one for me
@SlavkosHobbyChannel
11 ай бұрын
Thanks! I will make a video when I have more free time 😀
@Oniontechofficial
11 ай бұрын
@@SlavkosHobbyChannel please sir make a video I am going to make this flipper zero as my last year project I have no more time 😢 Please 🙏 make a full video as soon as possible
@Oniontechofficial
11 ай бұрын
@@SlavkosHobbyChannellove from India ❤💖
@WorkFromHome-th2eq
9 ай бұрын
@@Oniontechofficial go go ...
So this means that the receiver in your car works at 433mhz I didn’t know that was a standard for car manufacturers
@SlavkosHobbyChannel
Ай бұрын
Yes, it is in Europe
你能把所需要的材料展示在一张图片里吗?😊
How to. Make this project expain eazaly❤❤❤❤❤❤❤
Do you know which cheap chip that supports with braktooth ? 😢 please make a video 🙏
I built this when I was making a gate opener....
有中文操作系统吗?😊
wait wait wait! arn't the car key use ir?
@SlavkosHobbyChannel
11 ай бұрын
IR is used by some car manufacturers like Mercedes, for transmitting the code to the EIS (Electronic Ignition Switch), to start the car, but RF is used for sending the code to the module connected to the central locking system.
@scooterboom4157
11 ай бұрын
@@SlavkosHobbyChannel oh that explains a lot, thank you!
Hello friend, I have a small problem, I hope you can help me. My phone is paired with esp32 bluetooth but it is not connecting. In your application, it gives a warning to connect to esp32, whereas it is connected from the terminal and I can send messages via bluetooth, please help.
@SlavkosHobbyChannel
9 ай бұрын
Hi, please share your esp32 code here, did you change something?
@dacram.
9 ай бұрын
@@SlavkosHobbyChannel Dude, I write here, but the comment disappears by itself after it is shared.
@SlavkosHobbyChannel
9 ай бұрын
@@dacram. Send me at: slavko.zdravevski@hotmail.com
@dacram.
9 ай бұрын
@@SlavkosHobbyChannel I guess it's an app-related issue because it works on a breadboard, the LED lights up when you press the car remote, and the storage usage went from 80% to 81% when I activated a few remotes. note: the brand of my phone is samsung note 10 plus
@SlavkosHobbyChannel
9 ай бұрын
Let's try opening the app first, and when it says to connect to the esp32, go to your Bluetooth settings and connect with the board, then switch back to the app.
will it work if I use Arduino
@SlavkosHobbyChannel
5 ай бұрын
Yes if u use another bluetooth module
@artiva9650
5 ай бұрын
Thanks for help
I have a esp8266 board which software i need to create this?
@SlavkosHobbyChannel
11 ай бұрын
I will make a video of the components that I used, schematics, code, and the app. The esp8266 has wifi features, my app uses Bluetooth.