I upgraded this buggy even more: kzread.info/dash/bejne/jJyr0MOtnZnHhLQ.html

@TG-wf6ln

3 ай бұрын

The Jeep is a Cherokee XJ for the record.

@Madeulooktwice

3 ай бұрын

bout to sue erry body

@EbonyPope

3 ай бұрын

Is he welding aluminium to steel??? Can you even do that?

@VasilyBuilds

3 ай бұрын

😂😂😂

@jimsmirh2406

3 ай бұрын

@@VasilyBuilds Where in TN are you located?? I live here myself.

Good to see a sponsor. You work your ass off for this content and you deserve to be compensated for your hard work.

@EbonyPope

3 ай бұрын

Is he welding aluminium to steel??? Can you even do that?

@tonya9614

3 ай бұрын

I was thinking the same thing! typically I don’t care for them. But this time I was glad to see it!

@millroyboy07

3 ай бұрын

@@tonya9614 It’s always a pinch to have to plug a sponsor but if the sponsor is respectful, and is helping you provide content, it’s all good.

@dublewis547

2 ай бұрын

@@millroyboy07😂😂 deserves , people speak so privileged

Note to self: add gas peddle, fenders, more panels for cockpit, snorkle for air fltr. Finish 4WD & paint. Ready for Summer Rippin!! 😎👍

@nubixcookiegaming4103

3 ай бұрын

And reverse gear 😂

@funkytransport

3 ай бұрын

Pedal

@FarmerFpv

3 ай бұрын

@@funkytransport He's going to add peddles for when he runs out of gas. Personally, I prefer the Fred Flinstone approach. lol

That things a Beast!! I cant imagine in 4 wheel drive, that thing will crush the dunes!!!

@EbonyPope

3 ай бұрын

Is he welding aluminium to steel??? Can you even do that?

Fuel is coming the gas cap. Another good video by my master craftsman Vaslie.Vasile. 10:24

Nice I ended up polishing the same style turd you did. I ended up putting an engine from a 2004 Suzuki LTZ 400 quad. The buggy used to go 40 mi an hour tops downhill now it does 70 up hill..

@15:45 with that power level understand suspension is of great importance. It can save you from getting hurt. Rock on young fella

09:06 put 5 times the recommended amount on the bottle of Fuel Stabiliser when you go for your last run before storage. Fuel up to top of tank with same ratio and park it. Won't ever empty bowls or get gummed up carbs again. We do this for the winters up here in Quebec, Canada. Never had a golf cart or sportbike give me trouble in the spring. Been doing this just over 20 years now, was an old timer that clued me in to this trick.

@VasilyBuilds

3 ай бұрын

sounds good. I try to run the bowls dry before i park it. But I always forget

I would consider making some fenders like the honda odyssey buggy has so you aren't covered in mud all the time and getting hit by whatever the front tires kick up. Awesome build!!! Just subscribed, can't wait to see it completed in all its glory!! Keep up the hard work!

Glad to see someone thinking about protecting themselves from coolant. I’ve seen so many builds of different vehicles that looks deadly to the driver WHEN the coolant eventually pops. Good job.

@TSRGarage

3 ай бұрын

Agreed, especially the buggys / karts with the radiator set at an angle above the engine, right behind the drivers/ passengers head.

So cool to see your metal fab work, it's very impressive

Hell yeah bud I'm stoked to finally see that buggy hit the ground running! When I least expected it too lol. Nice build overall And that Banshee bike is nasty AF! Keep on building cool shit! 💪

This build is wicked! Thank you for getting back to this

I absolutely LOVE this little buggy! Nice work, brother

And now I know for sure that a 2 seater can be upgraded this much. Thank you. Just started looking at some in the past week.

The build looks epic! Keep doing what you do 👍‼️

...You're a beast with it! ...😊👍👊

One sick little buggy!!! Going to be insane with that all wheel!!!

Wicked cool buggy!!

You and Chris got my building a crossfire with a 670 and Polaris hlnr transmission same stage you are. Need to go back and finalize some odds and ends

Build a couple of snorkels and put a filter box on the roof to keep it from trying to suck in water

Glad to see the buggy return!

The easiest way to reverse is a PCM off a newer Polaris sled. Around 04 they started building all 2 stroke sleds with electronic reverse. Meaning you start the sled, hit a button, the engine shuts down and restarts running backwards. Instant reverse. 2 strokes run as good backwards as forward.

NOICE!!!!!! Love that you went back to finish this beast!

Dang that thing is sickkkk

Glad you could use the harnesses! I’ve been waiting for an update on this project. I think it is what I ultimately wanted frakenbuggy to be- so pumped to see how it turns out. Keep up the good work!

@VasilyBuilds

3 ай бұрын

👍👍👍

My Favorite project. Keep building it!👍

Thanks for showing me this build. I have the same engine and like buggy that I want to build the same way. Didn’t know if it was possible. Thanks again for the video. Very stoked to build mine.

Best shake down this week! Looks dope. Def "vasily-it"

As the video starts..... I thought for sure you would be closing in the front, maybe adding fenders to stop (limit) flying dirt, water, mud.... looks like a fun ride.

Bought a sxs last year ! I'm hooked 😅

Looking jacked and confident man, Love it!. Badass little rig there. KX 500 is SICK

Morgan and Morgan is so fitting

Hell ya let’s see that boy fixed up

I’d like to see you make a good belt cover and nice water proof air box so water doesn’t ruin it and get the awd working, love the stuff you build

You have put in a ton of hours buddy keep pushing

Absolutely nutty!! Sound sick

Bigger tires,lexan windshield,and 4x4 oh don't forget SNORKELS:-)

Do it! Awesome result for a build you weren't real hopeful of. Sometimes those cheap agricultural Chinese products are just the ticket! Some better enclosure for sure!

you should invest in some cleco's. They would save you a ton of time

I think some bigger shocks in the back might help 😂

Looks like a blast to drive!!

This things sweet! I found one of these for $1,000 but haven’t bought it yet. Going to try and talk them down to $500. You should gusset or weld the back of your harness mounts. And your pull cord needs another loop in it to fully retract the cord.

Bro I’m so pumped about this video!! I recently started working on a project similar to yours! Hopefully it turns out just as good!! Keep it up dude!!

How are you doing vasily, I’ve back after A long time I used to watch you as a kid since the old blue China 670cc buggy

Bro you are living my dream!!!! Who needs to waste 30 + grand on a rzr when you could just do what you did!!! Very impressed and awesome to see how far you have come

That thing is bad ass and when you get the 4+4 all hooked up that thing's going to fly in the 4+4 launches are going to be serious you're going to love it

OUTSTANDING JOB YOUNG MAN

@VasilyBuilds

3 ай бұрын

Thank you

Might want to relocate that fuel tank. Having it mounted so close to the exhaust with fuel spitting out the vent might give new meaning to "coming in hot!"

You can use an air nozzle on other areas of the metal to prevent the warping😊

Def want to see this keep going, got a tomberlin 150 frame and a Honda Silvering engine. I want to build something like this, wish I had the skills this man does!

Nice work that thing is cool rubs good be careful bud

Congratulations! You've officially created the 'Hulk' of off-road vehicles. Just make sure it doesn't start smashing through traffic lights!

Love that temporary gas tank

It's nice to see you're not crashing into neighbors' houses and breaking bones anymore with Chinese buggies. Let's keep this pattern going, lol.

Get a Polaris snowmobile voltage regulator and a rectifier and you can turn the AC output to 12V DC...

Dude......FENDERS !!! hahahaha !!

With the extra weight u mite not have to touch the clutching. The extra power mite cause it to over rev the clutch weights but the extra weight of the bike will pull it down

Thats it bro im diggin out my china buggy next 🤙 That thing rips!!

Should have bolted in the center part of firewall so you can work on primary clutch without removing the engine. Those twins come to life w a good clutch setup.

@EbonyPope

3 ай бұрын

Is he welding aluminium to steel??? Can you even do that?

@BSConservativeGOAT

3 ай бұрын

@@EbonyPope he wouldnt be welding aluminum to steel. Hed weld steel tabs to the steel, drill holes in the aluminum and bolt the aluminum to the tabs. I believe thats sheet metal anyway. Aluminum isnt cheap but would be much better at blocking out the heat from the engine

Very nice builds and 2 stroke soundtrack is epic ! Make sure event marshalls know its a gas tank and NOT a fire extinguisher anymore dude 🫢

Hey man cool idea put an extra long pull string on it and have it run up to the center of the roof that way all you have to do it strap in reach up grab the pull start pull down and it'll fire use pulleys makes it easier

That’s like 1400 cc of 4 stroke.. 2 strokes rule!!🔥🔥🔥

Snorkel,reverse, and Fenders will be nice.The bike sounded good too.Now about the 85cc...I'm running,uh close on my Motorized bike.Shhhh.That's what you were doing when I found your channel.Now 500 c isn't enough..lol...Keep on building Vasily !

@VasilyBuilds

3 ай бұрын

Right on

Sounds great

your neighbors probably love hearing that thing

I admit when I first saw you I was like this kid will never make it but your bills just get better every time much respect

You mentioned clutch work that running gear has adjustable clutch on the secondary pulley in the center is a metal disk with 3 bolts in it you loosen the bolts but don't take them all the way out and you turn that disk if I remember right there's 5 settings you'll see the numbers on the disk hope this helps

Bro, nice job!!! A snorkel and maybe a skid plate should be added. You have a bright future ahead of you!! Great video

Awesome! Put you a 2” or 3” lift on it!??? I’m really, really liking it either way.👍 Edit: oh, and a removable windshield☔️lol

Man I’ve seen a few new Yamaha vmax1700 motors for sale on the forums. Those things are super reliable 200hp beasts. The power is amazing and feels every bit as fast as my R1 in a straight line. Freaking awesome motors.

Badass side by side buggy

Nice work.I love your videos

@14:27 700 2 stroke converted to 4 stroke is 700 X 1.75 = 1225cc

Aint no way they sponsored lol 😂 it’s great I see them highway signs Morgan and Morgan

You have the COOLEST set of Frankenstein toys😍😍😍😂😂😂👌👌👌

I believe you should start a business of moding vehicles. You're very smart all you need is capital and a few employees. Its exactly how Hennessey and Guntherwerks started but I believe you're better than they were at your age.

Those 700 liberties are bad ass. My kids got an original in her sled that has 10k miles all original and 150 psi both sides still looks new. They go forever. The 800’s don’t. Have a few of them too.

Tbh putting some holes in the top part of the firewall might not be a terrible idea. Would still keep you protected from anything major and would probably help keep that exhaust from cooking your back with some air going over them. That metal is going to get real toasty

great stuff thanks

Insanity at its best! Heck yeah!!!!

Those Jeep tires were racing slicks 😮😮😮

Bro it’s turning out mint ,I have a worry tho,when you 4x your going to need front mud guards ,or you getting pummeld with dirt rocks water ect ,sound sick ,love it,but then again there’s a lot of work gone into it ,you done a great job 😎

That is awesome!

Sleds are dc and they do put out some electrical power that's how they run lights..should be able to somewhat charge a battery..might have to get the stator and mag from an electric start polaris xc700

Looks like you will be welding in so more panels 😂 but for mud this time

Very cool! 15:00

I'd love to move back to Tennessee in a heart beat

That’s behind crown Chrysler in Cleveland used to call that place brewers and that steep hill you were looking at under the power line was climbed in a Jeep Cherokee and a 4 runner

Damn that thing is really coming along. Ned to get the throttle situation figure out though. The string would piss me off

I am interested in seeing more videos of this... can you make them longer please

Que locura, quiero uno igual!!!

Just need some paint and is perfect👌🏼

Master cylinder in the wheel travel area on an off-road vehicle w plastic reservoir might need some protection bud...but a solid build as usual ...keep kicking ass

Positive Thoughts..... I very much prefer your content over Westen Champlin for example. I wish you had as many subs as those big channels that are pure --mindless entertainment--. Keep up the good work man!~And don't rush your videos, You builds are very modified vs others!

@VasilyBuilds

3 ай бұрын

Thanks for the feedback!

Damn now you need some kind of windshield and if it were me I'd weld panels along the frame on the sides kinda like you did the firewall to keep some of that mud and water splashing up into the kart.

Alls I see needed to be a perfect trail buggy is an air filter relocate or air box and snorkel, and man if you extended it about 5-10 inches it’d be perfect I think, wouldn’t be hard. Chop it down the middle and add some metal beef it up. It’d help with in just about every aspect besides your turning angle

You should 3d print panels for the body plastics!! If you model it I’ll print it for you!

might want to make some splash guards and or move the intake on the buggy prevent it dying from water

add fenders more panels underneath don't want the tires kicking a rock towards your face. a gas pedal so u can have more control on the wheel and a snorkel for the water and that thing could dominate anything you throw at it. keep it up