Келесі
- 12:53
- 1,7 МЛН
- 11:45
- 161 М.
- 11:00
- 251 М.
- Күн бұрын
- 00:51
- 77 МЛН
- 18 күн бұрын
- 00:40
- 168 МЛН
- 9 күн бұрын
- 00:49
- 6 МЛН
- 14 күн бұрын
- 11:34
- 165 МЛН
- 9:16
- 50 МЛН
- 10:57
- 628 М.
- 10:56
- 772 М.
- 17:25
- 2,7 МЛН
- 12:37
- 3,1 МЛН
- 13:04
- 682 М.
- 9:17
- 451 М.
- 11:00
- 251 М.
- Күн бұрын
Пікірлер: 178
Good too see people spending time and their nitro cars. That actually has a lovely sound and props to you for fitting a remote starter motor, good job mate.
@RyanH87
Жыл бұрын
Cheers man! Cant help myself haha always tinkering with them
@mr.airasia
9 ай бұрын
make it spit flames
@DJLAWOLF
6 ай бұрын
@@RyanH87hey I was wondering do you have a kit of what you made of making it louder I was thinking behind the big black versions 6.5 hp in this sounds badass
The header primary length is tuned with the expansion pipe dimensions. This would perform a lot better if it was juat a stinger pipe extention to the rear.
@PauloIrineudeSouza
3 ай бұрын
I wanna put the exaust beck do my bodyshell on rc car, so, dosent matter the size of the pipe after the exaust? I have one kyosho drx with brand new body form my collection, i dont use the car to not mass with the paint etc..
Hell yes!!! Sounds cammed af on start up
The expansion chamber needs to be closer to the exhaust port it'll make a world of difference with the throttle response. It looks cool though.
@RyanH87
9 ай бұрын
It actually ran pretty good in that configuration, but I did re do the exhaust and the second version is how it should be and it does run a bit better now. I put another quick short up
This is so sick bro!
Damn.. love the sound when it started up..❤
Now that's a nice rc build 👍
Great work, sounds real good!
It would be cool if somebody made an expansion pipe for one of those tiny nitros. It would sound wicked
@RyanH87
Жыл бұрын
Like a 2 banger one aye haha yea that would be sick.
@Tboninator
Жыл бұрын
Thats what is on the end...and normally what they run. Two strokes dont run well without an expansion chamber.
@NOTTApro142
Жыл бұрын
@@Tboninatorwhat I meant was that it would look like a 2 stroke dirtbike pipe, starts near the exhaust port, gets real Big, and then has a small silencer at the end. The bigger rc car engine have em. But one day I really want to put a dirtbike engine into one.
@devindunn2575
9 ай бұрын
@@NOTTApro142that’s how most are built puts the powerband up really high like a dirt bike. 20-30 thousand rpm’s isn’t uncommon. This pipe should kill top end power unfortunately.
@NOTTApro142
9 ай бұрын
@@devindunn2575 yeah.
That’s stunning!!! Adds some realism to the model with the shell on… the Big 6 has a rear exit that goes through the shell and I’ve always like that….
Nice full remote electric start setup! That's super handy. I need to get back into nitro. I miss it.
Hell yeah, sounds beautiful 😍
that's sick 😂😂
How’d you do it? I wanna know. Sounds awesome
@RyanH87
Жыл бұрын
Bit more detail here 😀 kzread.info7eEyc8PTal4?feature=share
@therobloxyoutuberfunny
9 ай бұрын
@@RyanH87hi
Very nice 👌
Nicely done. Excellent project. Sending my support
Looks nice sounds great. I have an HSP .vk.18 also. Love the way you rear mounted the pipe. I really like the electric start or the remote start. Nice from one Nitro enthusiast to another .💯🙏🤝🫡
@RyanH87
Жыл бұрын
Cheers my dude! Its not the fastest nitro but its a fun reliable toy for sure!
@CrazyDad226
Жыл бұрын
@@RyanH87 it will drift and do donuts all day💯🔥🫡
Dude soo badass I was just looking to see if anyone has done a gas powered rc and real exhaust and I found a few of you out there, some have the real sounds too, epic.
That’s a sick Evo body
The fact that it actually works is so cool
CHE FIGATA !!!... ciao dall'Italia
Aye, nice work!! It's very well done, and it sounds great ✌️
Nice work man, Hard work always pays off
Wow very good ! Nice bike
Sounds and looks great but that remote start I must have for my Hpi rs4 3 🔥
@RyanH87
Жыл бұрын
The remote starter is totally unnecessary haha but its so awesome. Realy good if it stalls out in the distance.
That's awesome! We need tutorials how made this beauty
Hell yeah sounds good
That’s a nice build!!!
Startup sounds so badass
F_cking Legend
Sounds great
Cool man.
I want to know how you did the remote start. An of course that pipe an muffler set up sounds great
Nice job 👍👍
Nice sounds good I love nitro
Sick how
Nice!!
Extremelly cool road monster. This one Mitsubishi Lancer Evolution 3 GSR CE9A body in backside? So cool look in nitro rc. So expensive bodyshell but extreme beauty
Nice one kida 😎😎👍🏻👍🏻🇬🇧🇬🇧🇬🇧
That looks cool!
This is the def of start and go
Nice hsp with ez start system
I love it
Naol 😅😮nice 😊
That's a beast
Dog approved retreat haha
Exhaust is worth more than the entire VX18!!
I have that same chassis! But I swapped my stuff out for Traxxas 3s motor and esc
Can you show us that electrical start set up👍
@RyanH87
Жыл бұрын
Ill put something together for the starter system soon
Long pipe like that will probably limit the powerband to the low end of the rpm range. The pipe length is tuned to a specific length so the resulting exhaust pressure pulses resonate at a specific rpm range to optimize scavenging in 2-stroke engines. This will make the engine more efficient and more powerful. Huge gains can be has from properly tuned exhaust.
Nicee
I want to see it at full throttle
@RyanH87
Жыл бұрын
I need to buy a gopro haha, full throttle with one hand is dicey. It clocked 55kph with the GPS on so its not too shabby
This is so stupid... I love it
@RyanH87
Жыл бұрын
It is silly but stoked it worked out well 😆
I like that remote power start. Can you make one?
Clean RC man sounds like a absulte beast just needs an exhaust bracket to stop that exhaust from shaking but that appart it sounds really cool!
@RyanH87
Жыл бұрын
Screw was a bit loose. Tightened it and holds well. Cheers man
@radomassthings69
Жыл бұрын
@@RyanH87 it's alr man just been learning and doing RC hobby for ages so ik not as a know it all or an upright person what's wrong but Ur RC was really clean and massive respect the nitro RC hobby is so underated
@RyanH87
Жыл бұрын
@radomassthings69 cheers man rc are always good fun in all aspects.. I just like tinkering with em. I've put a remote starter in my HPI savage 4.6 so I'll do a video of that soon
@radomassthings69
Жыл бұрын
@@RyanH87 can wait to see that as I do love HPIs they are just really clean and one of the best Monster Trucks!
theres a reason why it is allways same look exhaust in nitros.that looking good but it take off power
Really cool project and btw I have and idea that u should install 1 or 2 more exhaust it would sound mor ecooler
Looks good and great work, but from a physics standpoint, the length of the exhaust before the expansion chamber will render it useless. If you put the expansion chamber near the engine and ran a long tube after it, that would fix the problem.
Excelente
The expansion chamber isn't doing anything back there, it would make waaaaaaay better power with the expansion chamber back where it was and the extension behind it. Then you could make a little resonator that would actually change the sound if that's your goal. Running it this way is gonna make it hard to find a good tune.
@RyanH87
Жыл бұрын
Had that fitment originally but wasn't ideal for firment and surprisingly it runs almost as good as it did with just the tuned pipe on the motor. Its just a pavement basher
Nice job on the pipe. Sounds good and nice car ! Team Associated ? The blue aluminum makes it look like one anyways...but I know theres tons of rc Company's
Bellissima ❤
I wonder if you could make nascar style boom tubes or if they would even work at that size
That’s cool….Just curious, did you loose much HP?
@RyanH87
Жыл бұрын
I haven't really noticed any power loss to be honest. It still hits top speed pretty fast
Great job, what size tubing did u use
Dope!
Wish I had the money to play with stuff like that, love that dog reminds me of my grandbaby!
hii looks amazing can you do a video of how u did the remote start
@eeki9473
Жыл бұрын
I think the rc is on a starter box
@ZedNFT
11 ай бұрын
Traxxas easy Start style
Good thing he redid that exhaust, oil will build up in the pipe and choke out the motor, nitro engines spit alot of oil out the exhaust it needs to be able to drain
Looks like the filler rod didn’t wanna deep into the joints easily. Looks decent
Awesome 👌!! I am looking for a good quality nitro car (not monster truck). Any thoughts or suggestions for 1/8 (or 1/10)
You have to understand what the expansion chamber does for a 2 stroke engine. There is a maximum distance that the first chamber cone has to be from the exhaust port… in other words you completely ruined your power band and even changed your full throttle fuel ratio. This looks sick and the work is nice but you actually took away a lot of power from that engine. Not hating but thought you should know.
That's the Wolunstart remote starter?
@RyanH87
Жыл бұрын
Yep sure is
Looks awesome from a craftsmanship standpoint, and overall aesthetics. Well done. However from a standpoint of having a good running engine it looks super restrictive, I would think you’re probably losing a lot of power… is there a reason you can’t use a shorter one?
That’s a lot of pipe man
*Sonho em ter um desse...👉🇧🇷*
All u need in underglow
Tenho que arrumar o meu acho louco
work of art!! Is this an hsp? Why the Red cable goes into the glowplug?
@RyanH87
Жыл бұрын
That's the power for the glow plug needed for the remote starting.
Fuck the exhaust!!! Did you just AutoStart that!?!😳
@RyanH87
Жыл бұрын
Haha yep. I have the same on my HPI Savage too, video on my page
go straight pipe lol.. jk looks dope
@RyanH87
Жыл бұрын
haha still need the tuned pipe for the pressures
Love that body shell are you in the uk
@RyanH87
Жыл бұрын
Australia 😀
doggo😍😍😍
How you wire it so can start it with a button instead of using the pullstart and the ignitor
Which hsp model is that? And how did you build the electric starter setup?
Got a link or info on that starter? I’d love to get one built in so I don’t have to toy with the rotostart
Nice, but pipe is way too long. Potentially detrimental to performance
Wouldnt it have been easier to flip the header to run ot backwards, or did the starter not give the clearance for that?
@RyanH87
9 ай бұрын
It's got an electric remote starter and that sits above the exhaust manifold so I can't flip it with that on. Otherwise yea that would have probably worked to shorten the exhaust 👌
Swag
Where in the world did you get that muffler I need that
Chique carro 🚗 💥 💨 😃
That curve is very very very very very bad for the engine and performance but looks cool
@RyanH87
Жыл бұрын
Oh 100% but it's just a old VX18 so not too fussed. Wouldn't do this to my savage haha. Performance wise it needs a light tune up but still has a decent power band
@slottygw2wvw842
Жыл бұрын
@@RyanH87 oh yeah a vx18 is like 50$-70$
Hello, what kind of system did you use for automatic remote start? I want to make a system like this too. Can you share it with us?
Can u make a video on the autistart brother?
Where did u buy this eletric starter
What you use for it to automatically start
I’ll take one
What chassis is this? Looks like FTX?
What motor is that? Does it have 3 speeds
not to mention remote start. sikening