One of the most humble, down to earth KZreadrs in the car scene. I think you are a genuine nice guy and I wish I lived in the States so I could meet you and see the Lambo in person. Been following you for a few years now and the progress this channel has seen is nothing short of amazing. Keep up the great work for us petrolheads to enjoy!

@LOWLOWS18

5 жыл бұрын

Please put rear bumper. Naked look is cheap looking IMO

@frank9392

5 жыл бұрын

@Lit Reviews No need to be rude

Do yourself a favor. For the wall between the office and the shop, go with a double-stud 2x4 wall. Bottom plates should be pressure-treated and rated for ground contact. You can go lightweight steel stud, just understand you may have rust problems in the future. You're going to want to insulate. Don't waste money on Fiberglass. Use Rockwool Safe'N'Sound stuff, as you're going for sound insulation, rather than thermal insulation. You'll get a bit of thermal insulation out of the deal anyhow. Also, you will want a fire barrier. Double 5/8" drywall between the double studs and 1/2" for the interior and exterior facings (use greenboard (water-resistant drywall) for the course closest to the floor) Also note, on the shop-side, lay down pencils or something similarly thick on the floor, pointing in towards the studs. This will act as a spacer to lift the drywall up off the floor so that if any water gets in and sits on the floor, it has to get pretty nuts before it starts soaking the drywall (belt and suspenders approach when used with greenboard). For additional soundproofing use this stuff to glue the first layer to the studs. www.greengluecompany.com/ At the mating surface of the two sheets of drywall Remember, you're going to essentially be doing this for a ceiling as well. Also, talk with one of your neighbors to do a sound test with you. Close your garage doors. Stand over by the windows in what's going to be your shop area. Have the neighbor get LOUD for a minute and see how much sound bleed you have. We help you determine if you want to build fascia walls on the interior of the shop office or leave them bare to the insulated steel. If you're getting lots of bleed-through, go with 2x4 walls and Rockwool. That should render your office fairly quiet. If you still get sound bleed through the windows, you can mask it with heavy curtains or built soundproofing insets. And if you're going to use it as a recording studio for videos, invest in foam soundproofing panels like these: www.amazon.com/Acoustic-Panel-Wedge-Studio-Soundproofing/dp/B07C94ZZ57 Also, you can probably afford to AC the office. Avoid the window units if you can. They're loud and very power hungry and would drown out most recording. They also are leaky, so you lose a lot of the cooling benefit. Additionally, they'e a security problem, as someone can pry out double-hung window with an AC unit in it fairly easily. Maybe look at a cheap ductless mini-split. Just two coolant lines running through the wall. Mount the compressor to the wall on the outside. Then you have a nice, quiet air handler on the inside. Don't DIY (kills your warranty). Spend the extra money to have it installed. Wish I could talk to you about electrical, but that's outside my purview.

@Dkhan23

5 жыл бұрын

Hyperstrike damn, this guy 🙌🏽

@truthsmiles

5 жыл бұрын

All great advice from @Hyperstrike. I would also suggest clearing all of your "not trivial to undo" plans with your landlord, like the epoxy you mentioned and the office space. Building walls usually means driving anchors into the concrete, and there are different kinds that cause more or less ugliness if the walls are ever removed. I'll add that you might consider what you want to do with the space above the office. If there's ANY chance it's going to be storage for heavy things or a potential second floor/sleeping space, you'll have to build accordingly.

@PhotonHerald

5 жыл бұрын

Some additional things I forgot. Truthsmiles is right. Make sure you get the OK from your landlord before doing ANY of this. Under the stud wall's bottom plate, use sill plate gasket. Nailing/gluing down the sill plate only goes so far. If you get water in, it can force it's way UNDER the sill and into the office space. www.homedepot.com/p/Owens-Corning-FoamSealR-5-1-2-in-x-50-ft-Multi-Use-Ridged-Sill-Plate-Gasket-2FS/202080947 Recommend pre-building your stud walls and then tilting them up. Place the sill gasket where the sill plates go, then attach the wall to the floor (make sure level and plumb when you go to put the top plate on. Attach fire-barrier drywall on the inner wall. Smear with Green Glue. Prebuild the outer stud wall the same way, but attach the fire barrier drywall before tilting up. Will make the wall MUCH heavier. So bring buddies or build smaller, panelized wall sections. Smear some more green glue on the mating surface, then tilt up and push up against the first wall so you get solid contact. Also, recommend bringing the bathroom into the office space as well. Shop toilet areas can get pretty gross, even if just from leaving it open to a clean, open air shop area.

@gizmofrek

5 жыл бұрын

wow... i didn't read that...

@KayKashi

5 жыл бұрын

Hyperstrike be needs to see this

Love your work. I will support your sponsors for sure! The is so much better than TV. Keep it up. Thank you!

Yes!!! Really cool to see your new work shop, was not expecting that at all. Amazing!!! Really happy for you and can't wait for your upcoming projects. Exciting times for the channel.

You’re real sleek when it comes to plugging in sponsors lol not too cringy not too overdone, works with me.

@tudorpopa3c85

5 жыл бұрын

Make a Lamborghini killer out of that Supra.1000hp.baby.😎

Soooo.... What Did We Learn Today... You Are A Good KZreadr And For What Ive Seen For A Couple Of Years Is Youre Totally Honest About All Things

@Ducksnuget

5 жыл бұрын

Do you get tired of typing like that? You must know that's wrong, right?

@fuckngreat8955

5 жыл бұрын

Yes i Know its wrong and yes my hands do get tired

Congrats on the shop. Long time coming, gonna be an awesome place for you to take your projects to the next level. Can’t wait!

Awesome vid! Congrats on the shop, it looks amazing and being surrounded by other car guys will be a blast. It’s incredible that you are making a decent living sharing your hobby on KZread. I will be checking out the new channel.

Tavarish hairline is moving to a county called bare skin.

For the office space you should make it on the second story so you could still park cars on ground level.

@MrCarGuy

5 жыл бұрын

Sure, if he's fine with more expense.

@TheTransporter1461

5 жыл бұрын

I don’t think he will have that many cars in the future to need a space undernath the office and if, than he still can park some cars outside

@veganpotterthevegan

5 жыл бұрын

@@MrCarGuy you could built a lofted office for very little money

Congratulations on the new shop, you're going to have some epic builds coming up. Looking forward to seeing them!

Glad to have your vids back. Missed them big time past few weeks

I'm available for adoption. Just wanna put that out there.

@BrandMalone24

5 жыл бұрын

Unless you are over the model year 1992 and have a minimum of 5 cylinders I don't think you are on his list haha

@jacobpartin4553

5 жыл бұрын

Same

@xtraordinaryxtd9484

5 жыл бұрын

Have you been in a fire accident? Coz Tavarish only works on projects that caught fire :D :D

Huge congrats from Denmark on the new place. Looks perfect! Try and draw the layout and the stuff you want and need before you do anything! Try and cut pcs. of paper in various shapes and place them in a virtual room. Saves a lot of time later.. Bw. Hans Nielsen.

@pinnacle7100

5 жыл бұрын

Or get Microsoft Visio and do it all on a computer.

Love your work dude, tuned in all the way from Adelaide, SA. Judging by the comments I think you'll have plenty of hands to help you get the projects over the line in a reasonable amount of time. Big fan of the Lambo build so can't wait to see the final reveal!!! Keep up the great work!!!

I epoxied the garage/shop floor when I moved into my place. A friend who works at a marina recommended Seal-Krete Epoxy-Seal. I also used the primer/sealer. I've been extremely happy with it. Make sure you roll any drips or runs out immediately. It's pretty easy to do. Kudos to being transparent with your income. That's pretty personal. People would be surprised at how much more money they'd have if they didn't drink, smoke, buy coffee every day, eat out (fast food is crazy expensive lately) and all sorts of other little things. I've recently put a few of those luxury habits on hold and started selling things I don't need, want or use. It all adds up quickly.

Unless the owner is paying for it, DO NOT epoxy the floor. Why would you invest money for permanent improvements to someone else's building? Not to mention, there are probably caveats in your lease. Unless maybe your parents bought it and they're leasing it to you under the guise of rent to own or something like that.

@jake_of_the_jungle9840

5 жыл бұрын

OMGWTFLOL yeah definitely! He could save that money for another hooptee!

@maartenmaarten5510

5 жыл бұрын

Because he will pay with a shout out and no money is exchanged ;-)

@CenCt5Driver

5 жыл бұрын

I work in commercial real estate and this is spot on. Epoxying the floors is definitely something Tavarish should have had the owner do as a TI. It might be too late but he should try to work with the owner on some form of compensation if he chooses to do it.

@chrischris930

5 жыл бұрын

Its not that much money..... and the landlord will think twice about kicking him out,, But some people dont know how to do business welll

@mcearl8073

5 жыл бұрын

Tony Hsieh he said he’s the first tenant so it doesn’t seem likely that he bought it.

1 fix the lambo 2 fix bently 3 fix merca 4 fix supra.....

@datkhary6015

5 жыл бұрын

he said it wasent hard so do it under a week end

@jackb456

5 жыл бұрын

Go huskies!

Man, I love your channel, but this video kept reminding me that my dad's gone. I think he would have -loved- your channel, and he lived in central FL (except towards the end, where he moved down south where my step-mom's family is). I was like "Oh, he might know someo-- oh, wait," every few minutes. Congrats on the new shop! I'm sure you'll have great memories there. My grandfather had one seperate from the house, since he owned his own trucking business for a long while.

The rough engine idle may be ignition coil problems. VW cars from this era had lots of ignition coil problems.

@joelscb

5 жыл бұрын

Also fuel efficiency problems, they didn't build the cheat system good enough.

I'm started to think that tavarish loves the challenge of "Revive burned cars" xD

Congrats on the new shop! Agree on the 350z over 300zx NA. Had one and it was a headache. 350z parts support is huge.

Your living my dream of buying and fixing up exotic cars, awesome man great video Cant wait for future content

one thing that make me love tavarish video is that he buy cars in near dead condition/ despair conditions, where most youtuber buy standard, working car with probably one or two minor or major problem while at tavarish, man oh man its more than that. Highly salute your effort and patience working on these cars, its such an amazing process for us viewers to see!

As a man with no need for caffeine, nicotine, chocolate, ice cream, snacks, consuming anywhere close to the average amount of alcohol; money grows quickly when nonessential habits get kicked out, no matter your income. Keep up the good wrenching!

- Dodge product from the '90s - Reliable Choose one

@asherq8646

5 жыл бұрын

Pretzul reliable = jdm soo... easy decision

Good job man I look forward to more projects from you as fall is starting here in New York and all our summer toys are getting put in storage for the winter toys to come out and there is not gonna be much to do besides watching you guys in Florida enjoying your projects and the beautiful weather

New shop looks great! As someone else said about the office space try and build it on the second floor so you can use the space below. Or build it at main floor and build a good storage location above it. Remember to install a good security system!

Don’t buy any new cars! Just finish all of these please lol

@cygnus58

5 жыл бұрын

I'm done. Ridiculous to not finish it, or if it's finished, the drive.

Congrats on the new place tav, very nice bro!

Thanks for tour. Loved it. That BIG shop will get small very quick. Keep it organized brother.

Awesome build man. I have a similar project going with my AP1 S2000. It was one of my dream cars. The price and color were right, but it needed a ton of TLC. I've restored it, turbocharged it and now I'm modifying it to deal with some issues that a turbo brings. Your videos keep me optimistic and give me ideas for addressing issues beyond my level of knowledge or comfort. Thanks man. Keep the videos coming.

No A/C for your new garage?? We don't need to see no more sweaty Freddy!

@cafe88racer53

5 жыл бұрын

maybe when the office is built lol, ac for whole shop would cost more than the lambo

You need 2 spaces in your new wharehouse. You need a lockable office and a public reception / staff space. You dont want everyone that comes into your warehouse to have access to your office and electronic equipment. Have a lockable space you can lock and walk out of. And then have like a reception area with chairs and maybe a table , coffee and a fridge

@mcearl8073

5 жыл бұрын

peter neagle a reception area for who? It’s not a commercial shop he’s setting up.

@peternt2008

5 жыл бұрын

Did you not hear him say he wanted a spot for an office and area he could place chairs for people when he does stuff ? I dont know he might have meet and greets there, he might hire staff. Bmac listen more closely to the videos.

@mcearl8073

5 жыл бұрын

peter neagle I did listen to the video. He wanted an office area to do podcasts and shit in. Why he’d need a reception area to have his buddies or a guest to come over to talk about cars is beyond me.

@peternt2008

5 жыл бұрын

Go and see an ear doctor. "" I'd love to have an office space right here just so we could have a podcasting place, a place to edit AND A PLACE WHERE PEOPLE CAN MAYBE LOUNGE AND CHILL OUT WHEN THERE IS A LOT OF WRENCHING GOING ON AND YOU NEED SOME PLACE TO DECOMPRESS "" What i am getting at, is he needs a secured area there, somewhere away from people and lockable. Somewhere he can leave his electronics ,somewhere he can have the keys to all his cars secured. Basically there are people out there who like to steal. And if all he builds is an office, whenever anyone comes to visit for any reason, they will be forced to sit in the office. It doesnt have to be a reception it can be a coffee style staff room or anything.

Congrats on the building. I can’t wait to see what’s in store.

Sweeeeeeet. Can't wait to see you get into the shop. Congratulations !

I just assumed you and Samcrac shared the same shaving kit, and alternated back and forth every week. Are you planning on having any shop pets.

@rob0kopp203

5 жыл бұрын

Lewis B

Tavarish you’re a light and inspiration to a lot of us. Thanks for all the great content. Been with you since the first S Class video bud

Great to see the direction bro. One of the best car channels out there. Keep it up!

Great work so far and great to see you're expanding.

For your f350 look up Bruce wilson he has a KZread and is in Florida and owns after hour diesel

Florida would be one of the best places for a Gallardo I would imagine. You're already there!

@hectizzie

5 жыл бұрын

California would be great too...

@MaxSpeedMike

5 жыл бұрын

@@hectizzie double the price of Florida in terms of living costs. Tax is 9.75% over there not to mention

@Craig_Bolin

5 жыл бұрын

I drive my z3 top down here year round. Definitely not nearly as nice of a roadster but fun regardless. The winter is definitely the better season for top down driving though. A/C does help in the summer. The only problem in Florida is the lack of twisty roads.

@jimbeam7248

5 жыл бұрын

MaxSpeed tax in Ontario Canada is 13% and terrible weather

@MaxSpeedMike

5 жыл бұрын

@@jimbeam7248 wow I was only talking about the states but that is absolutely ridiculous considering you guys get snow for like after year. I think Canada is more for visiting rather than living in my opinion only because as a car guy I don't know how I would be able to deal with snow for half of the year or even more

Having designed/spec'd many vehicle workshops I have a couple of comments: 1) The floor looks as though it was power floated, which means that it will become a skating rink with any liquids on it. You have a couple of options a) Blastrac the floor to get a grippier surface and then seal it, which is relatively cheap operation or finish it with epoxy/polyester with sand added. Take special note of the bay joints, which must be maintained 2) What is the wall finish? It should be IMO concrete block up to door head height so as to be durable. It does not look as though you can fix anything to the walls so you will need a subframe for all your perimeter fixture. Also, how flammable is the wall finish? You will be doing hot work internally as well as having machines working so this needs to be completely non-combustible. 3) The lighting is generic warehouse type lighting, which is not suitable for vehicle workshops. You need flourescent/led strip lights running lengthways between the bays (not over the top of the vehicles) so as to light the side of the vehicle - these will also minimize the shadows within the engine bays, interiors and boot areas. Add perimeter lighting at door head height on all the walls. 4) Install a decent sized compressor(s) and fit a ring main so as to allow plug in points all around the unit. 5) Fit an external water hose point and power for a high pressure washing facility. 6) Consider fume extract but remember that vehicle fumes are heavy so that the extract points need to be low down and therefore don't make good general ventilation. 7) Add some fans through the roof for ventilation. 8) Add a stainless steel wash trough with ss splash back for general hand (and occasional parts!) washing because your rest room area will become a might ****hole if you have to wash in there. The trough can be sited against the rest room wall to easy the plumbing installation. 9) Install CCTV and decent security because you will be more vulnerable than your neighbours. There are many other considerations but these are the general main ones.

Congrats on the shop!!! You're living every car guys dream brother!!

Your warehouse reminds me of a GTA 5 garage lol, I remember just stealing cars and putting them in the garage since I did not have money at the time

I'm getting overwhelmed w all these projects and I'm only half way through lol

That space is amazing. Super happy for you dude, congrats. When are you back out West so we can get you on the podcast again?

Dude, congratulations, what you are doing right now is what I have dream for many many years, I can’t achieve it but it made me so happy to hear that someone has ideas just like mine! Great job

Get a final gen rear bumper. The LP570 tail lights with 1st gen bumper will look weird.

Hay I live in Florida and I specialize in the 7.3 I own a small shop in Ocala by myself

Easiest thing to do for the office: have a company modify a shipping container or 2, they can plant them in your space and hook up power. A lot easier than building a traditional framed setup. And when you need to eventually move to a bigger warehouse, you can have the containers moved.

Oh man, thanks for the “love bug” flashback. I lived in Orlando until 05 and my 99 Camaro SS still bears the damage from those things. I was down for a visit in August and hoped to see that Lambo running around. Maybe next time. I love the SL55, and might even be looking for one next spring. Oh, I feel your pain with the roof replacement. Hurricane Charlie got ours when it came through. I thought they’d never finish that thing. I’m going to check out the dollar shave thing now. $40 for a pack of my usual blades is just crazy.

Wait weren't you support to paint the calipers on the lambo?

So the new shop looks amazing. Can I come work for you? :P

@tavarish

5 жыл бұрын

Only if you get paid with shout outs

@802Garage

5 жыл бұрын

@@tavarish Works for me!!! Let's plan a week, hahaha.

@yamahonkawazuki

5 жыл бұрын

Tavarish i actually went thru or past winter park fla on way back north from key largo 3 weeks ago.

@PRINYATIP

5 жыл бұрын

Can I camp outside your newshop?! You can hire me as Mr. Barbeque Specialist....

@karldegroe6056

5 жыл бұрын

I will send you an email regarding the 7.3l f350 do not screw up that engine with a ton of mods

Thanks again for another great update, look forward to the next build.

So excited for the subra build! Your lambo build was hands down the best build series I’ve ever seen anywhere on the internet! Keep up the great videos!

26:40 time code for the Hoovies Ferrari, I got u homies

@thrashtonyy

5 жыл бұрын

u da real MVP

@danielbittencourt2377

5 жыл бұрын

Hom4ik awesome only reason I came here

tavariiiiish... hardtopping a totally burnt ferrari??? put that on a "going mental" channel :D

One of the most honest youtubers I’ve seen watched every video and will continue too.

Wow. That shop is the DREAM. Incredible. Plural lifts!!

Dieselsellerz ! Contact them to collab for the diesel !

@chasemorris5610

5 жыл бұрын

They are in Utah that's a little far. Bruce Wilson would definitely be better I believe hes not far from you there in Florida.

The Ferrari looks in much worse shape than the Lambo. I think you're just buying problems!

@Angel-wo8gv

5 жыл бұрын

At this point i'm pretty sure he's doing it for the challenge alone. Plus the initial "cost" was... zero? So there's that.

@ancholight

5 жыл бұрын

Gabriel i think there was insta photos of a donor 355 in better condition so merging of both perhaps

@CreationationTV

5 жыл бұрын

none of them are his cars, hes obviously lying!

@thelastmemphian

5 жыл бұрын

yeah check out his social blade, plus he has in video sponsors. he will make bank off of this ferrari

@Speedycat

5 жыл бұрын

* he is buying a few of Hoovies Problems :D

iM so jealous!!!! I love it all! As far as cooling inside get these porta cool shop fan/condenser type thing. They blow good they use water and fans.

I'm insanely jelly of the shop, brotha. Congrat's!!!

Powerstrokehelp.com has a channel and ate up in Georgia. Guy seems odd but knows and loves these trucks

@black07rr

5 жыл бұрын

Michel Foshee dudes a tool, he talks out his ass, he’s hated in the psd community

@andrewlatty

5 жыл бұрын

There is a better power stroke dedicated shop literally 45 minutes north in Cleveland, GA. They take care of all our ambulances with the 7.3 and 6.0 powerstroke engines.

the best of the best! big fan man

I'm happy about the tail lights...I really wanted into changed those....I was just watching this video in my college with my headphones on, and I shouted YES when I saw the new tail lights...lol

Humble and inspirational man! Huge congrats to making a living out of KZread. Cheers from Sweden (Been enjoying ur lambo build since the start)

It's like owning every car you can think of in GTA, but you have to fix and mod them yourself.

@markc8602

5 жыл бұрын

Just like GTA now he has levelled up and went from a 2 car to a 10 car garage

@Terminaita097

5 жыл бұрын

Legit, also about to put up those luxury led headlights to complete the dream look

"Nature be scary" -Tavarish 2018

Good deal man. I remember when you were just a young squirt wrenching in your parents garage. I'm happy for your success.

Hi, When I had my garage I built my office above ground level, into the roof, this way do don`t loose floor space and you have a good view from up there!

Big moves 👏

@mikesadventures3605

5 жыл бұрын

oh snap. what up throtl. im impatiently waiting for the return of the rx-7 and im super pumped for the Mitsubishi project

Please make the front lights the 2012 onesss you will,need a new hood but it’s worth it

I recently bought a 1992 BMW E30 325i convertible as my first car, and am in the process of fixing rust, and a few other things it needs. Thanks Tavarish for inspiring me to wrench every day

Im so happy for you and your progress!

Many many projects ! I thought that when the lambo came back from the shop she was finished but it's like she will never be. You have like 5 projects/ you're good for 3 to 5 years at this speed ! Anyway your shop look good but man please PLEASE finish at least one project ! You're up to too many things !

Put white seat belts on the lambo to match up with the body colour. (Like if you agree and to make Tavarish read this).

@kaszanyel

5 жыл бұрын

that's a good idea my friend, up you go!

@gamster2968

5 жыл бұрын

@@kaszanyel thanks man

@deanodyno5514

5 жыл бұрын

Blue seat belt to match the caliper

@hashbrownsforhamster

5 жыл бұрын

Dean Jr I think he’s going to paint the brake calipers

A spray booth and watching you learn to paint would be a really valuable addition to your channel. Great work by the way, and good luck with the builds.

Congrats on shop bro, cant wait for the Supra build😃👍

Now buy the Chrysler burried at the Wizard's backyard 😂

@faridwakim

5 жыл бұрын

Pretty sure that if he tries to pull it out, it will rust into pieces

Wow, so many questions.. First of all, congratulations! (I know I am being nosy here, but) 1. Why are you changing your channel from an at-home type of DIY-er to a shop DIY-er? I think many of us enjoy watching a guy that we can relate to. Breaking and making stuff in his own garage. 2.How are you able to afford all this? I'm not familiair with KZread revenue or your private job, so I am just curious. 3. I see you really enjoy buying new projects and thinking about how you are going to fix them up. However, are you actually enjoying any of the cars? Like taking them on trips and pampering them afterwards with a detail or such. Keep up the excellent content and I wish you the best!

omg that shop! congrats on the verrry near completion lambo. It has come up sooooo good.

Pro tip: for your office, go vertical. If you build it about 8 feet overhead you'll be able to park 2 or 3 cars underneath. Theres plenty of space above, and you'll be able to watch everything going on in the shop below. Good for videos.

air compressor with lines running throughout the shop, best tool to have.

@deannobody8293

5 жыл бұрын

or just battery.

Notification squaad where u at

I'm a framer in CT, is help if I was closer. But I have a feeling you may have a timing problem. Could show low compression on one side too. Vw and Audi love their plastic timing guides

For the Bentley you ideally need a scissor lift, for the phaeton/bentley you pretty much drop all the running gear from underneath, in the dealers they use a scissor lift with mounting lugs on it that you attach the running gear to and lift the body off using a 2 post lift. Quite easy to do with the right kit.

Get a fiat 600 out of the 1970's To get a picture in youre head you could watch one of my vids I mean its cheap and i actually love it maybe you do too

I swear he only collects hoovies old failure cars. Next he’s gonna get the labaron

@gkcooper

5 жыл бұрын

LeBaron

@finnlolig3089

5 жыл бұрын

I think the thing is just done for good

The reveal was AWESOME!!! Huge congrats on the shop looks amazing! the whole "let me show you my toys" thing is too funny...I sincerely believe cars some how give you mad doses of dopamine with a hint of adrenaline :D

Can't wait for what is coming for the future on your channel man! More dailyyyyy viddd!!!!!!:)

cannot understand why they call it dollar shave club when they sell nothing for a dollar.

@ivandimov6900

5 жыл бұрын

It used to be a dollar

@connorbeckmann2981

5 жыл бұрын

Well ot was cheaper than regular blade, but they honestly werent great quality. So i stopped getting it

@darrenkastl8160

5 жыл бұрын

No different than budget rent a car or budget furnace repair or budget this and budget that.

@j_freed

5 жыл бұрын

Just buy Schick Wilkinson, and don't bother with shitty aerosol shave cream, try the Weleda cream shave in a rube from Germany. These two things will change your life.

Notification gang yay

Good for you. That new garage looks very spacious and more appropriate for you to store your cars and work on them. As for the lighting, I suggest you try a solution you can move around the shop and have right where you need it, like the lamps used by filmmakers that are adjustable in height and angle.

Wow that’s great Freddy! Can’t wait for more vids!! Keep them comin

Ferrari F355 with fire damage?

@sgtjay

5 жыл бұрын

Yeah thanks, I posted my comment before watching the video. I knew who he was getting it from. So, yeah...

Why are you trying to give everybody blue balls just drive the lambo already and make a couple videos

i appreciate how much time you put into your segues for your sponsors

Wow, the shop is a massive improvement. Can't wait for what's to come.