In this video I use this Japanese hand plane that was gifted to me by the carpentry store in Naas. I tune it and use it to take some crazy thin shavings.
Жүктеу.....
Пікірлер: 117
@embers_cradle55 Жыл бұрын
Can really see the improvement in this video. Full thumbnail nice angles framed well. You have come far in just a couple of months
@EoinReardon
Жыл бұрын
Thank you so much. I really appreciate your comment,
@fredo5250
Жыл бұрын
@@EoinReardon yeah your quality has gone up nice to see you care about your audience
@samuelcarrico6278
Жыл бұрын
Eoin is a fast learner!
@harrytomlinson6304 Жыл бұрын
You make me want to spend all my money on planes
@WalterMelons
Жыл бұрын
That’d be the dream.
@Layzieee
Жыл бұрын
Thats the plane and simple choice here
@severini8153
Жыл бұрын
Planes used to be ridicously common. I've got like 10 very usable old wooden planes for 10€ each. They just needed a bit of sharpening and a flat sole again 👍
@Crvstylvngs
Жыл бұрын
Have done it and still doing it ever since watching Eoin. Already living paycheck to paycheck I might aswell have some good tools to have fun with
@JackDittmann
Жыл бұрын
@@Layzieee ;;(99
@TheMadTatter Жыл бұрын
I do like the Japanese carpentry I must admit, the self-closing joints they make are something else. They're some thin auld shavings there, they'll make your cabinet scraper embarassed to be a cabinet scraper, I reckon they'd be sound as a sort of woodsman's Rizla as well
@professorwikipedia2115
Жыл бұрын
Glad to know I'm not the only one who thought the shavings looked like kingies
@bakabaka2653 Жыл бұрын
The way he says "we" makes me feel like I'm working there alongside him.
@S1I9L7V9IA Жыл бұрын
My grandfather was a carpenter and I spent all my childhood and early teenage years working wood with him. He taught me everything about tools and how to sharpen them and maintain them in the best conditions. I just discovered your videos and I can't stop watching them. It brings me so much joy and beautiful memories of the amazing time I spent with my grandfather. I had forgotten how much I love the smell of those wood shavings! Can't wait to watch your next video. Thank you for sharing, Eoin 🤗
@clivebrampton6057 Жыл бұрын
Eion, thank you for your videos, so calming and relaxing watching and listening to you, keep up the good work ❤
@EoinReardon
Жыл бұрын
Cheers. Appreciate that big time
@clivebrampton6057
Жыл бұрын
@@EoinReardon no, thank you 🙏 your videos are so good for my mental health!
@WonderlandGhost Жыл бұрын
Man, iv been going through alot and honestly how calming you are and how enthusiastic you sound has really helped me get through things
@thereclamer2112 Жыл бұрын
I have a bunch of old planes box up when we moved. Can't wait to get my barn built so I can get my work shop back. Learned a lot from you. Thanks you can always teach an old dog new tricks (67).
@coltbudke6866 Жыл бұрын
I love listening to him talk and I have no idea why
@CinkSVideo4 ай бұрын
I love my Japanese plane! Working on the pull stroke is much easier on your back and shoulders and also allows you to work from a seated position instead of standing. Can be a great advantage for someone (like me) who is disabled.
@danieldarden28573 ай бұрын
Love your videos lad! You could be an actor in movies or tv. It’s so much more logical to me to use the pull stroke than the push stroke in woodworking. I don’t own any Japanese planes currently but I do own a Japanese pull saw that I love.
@anon0124 Жыл бұрын
Your videos are so interesting and relaxing. I get so inspired after to fix broken things in my house, even just mend clothes or pick watercolour over digital art. Keep it up!!
@Bakedrat Жыл бұрын
I love this Irishman
@wildewilde57756 ай бұрын
Kezurouki is the name of the competitions he's talking about with the wood shavings. It's crazy watching
@TheWardagh Жыл бұрын
Great job! 👍🏼
@readysetsleep Жыл бұрын
I was watching "the carpenter life" he is an American in Japan learning traditional carpentry. And visited the craftsman making plane blades and plane bodies. It was interesting to see two different craftsmen working on a plane. But they both leave the last bit of adjustment on the plane for the user to dial in for use. There is a micro plane and cabinet scraper they use for adjusting the sole of the wooden body. But I've never seen the Japanese to oil the wood body just the blades.They like the dry wood body to glide over.
@Mr_Midnight_2 Жыл бұрын
Love the video very informative and very fun
@darkidz24 Жыл бұрын
Thank you for all the great videos! Loving these long form ones. Good luck with uni you can do it!
@TuTuChief Жыл бұрын
You've stepped up your game with this vid Eoin! Great angles, properly mic'ed up, lovely lighting. I'll miss the cheeky phone being propped up, but I'm far more excited for what's to come. Please keep up the great work 🤙🏼
@MaSOneTwo Жыл бұрын
Joiner from Germany here, we will set our planes differently from this method. We glance along the bottom of the plane and eyeball how far it sticks out, then you hit the blade until it is even and sticking out just right. It takes a while to get the hang of but since most planes are made from wood here around you have to set them every time you use them. Becomes second nature real quick and it takes mere seconds after a while. I prefer wood planes because they are much lighter than steel ones and when running a plane along a piece of wood a couple hundred times a day, that adds up quickly. As a bonus you can run maintainance on them in your wood working shop.
@jamescecil3417 Жыл бұрын
I have one of those, thanks for your detailed explanation on setting it up. I've got another for shaving bonito "Katsuo" fillet blocks that are hard as wood. Your sharpening explanation will hopefully help me get good shavings from that instead of dust. Cheers!
@paulschweinsberg85689 ай бұрын
I just stumbled across your channel, and am so happy I did. Your work reminds me of working with my grandpa on the farm in 1980. Thank you Eoin for sharing your skills.
@maureenmango1 Жыл бұрын
It’s so wonderful how we came up with such simple technology yet it works so beautifully.. easy thing about this world is if it’s not broken, why bother fixing it! I love that you focus on hand tools, so entertaining and I really feel like I’m learning something valuable!!
@alaricsnellpym Жыл бұрын
I have a plane (the normal metal kind) kicking around, I've never mastered how to use it properly... you've inspired me to dust it off and have another go!
@linesofsanzu Жыл бұрын
the quality of everything about this video is great! incredibly relaxing and informative content thank u for doing what u do
@GregoryPiferi Жыл бұрын
Great video. Enjoyed the look into the delicate art of Japanese planes
@fabiotacconi9230 Жыл бұрын
Incredible work, didn't even know about any of this and i still feel super impressed, i love these videos :)
@Panchito123 Жыл бұрын
Pretty innovative workbench light
@josephcole2237 Жыл бұрын
you have gotten me into wood and technology thank you! and great video 💪🏼
@thothtahuti5509 Жыл бұрын
I got my caprtenty and joinery qualifications as a young man but ended up as a chef because of, life. I don't want to go off to commercial woodworking but you are absolutely reopening a passion I had as a child/young man, I have very few tools and it is quite difficult to come across (decent) old hand tools as I've discovered as I look for them second/third/fifth hand, as there's no way I could ever afford even basic tools new, but I'm slowly trying to build enough of a collection to be able to do some actual wood work again! ::) I love the longer form videos and thank you so much for reawakening an old passion, I don't like power tools but you have reminded me that I don't HAVE to use them, I can truly build with my hands... once I can finally get some proper tools, I can't make much with a rust based, snapped hand saw, a snapped hammer, no materials and a leather punch.... but one day, so again, thank you friend, from New Zealand ::)
@ScottCalvinsClause
Жыл бұрын
I'm in the same boat. It can be really tough to work up from nothing with no capital. I've found Rex Krueger's series, "woodwork for humans" to be pretty helpful and inspiring. I know its not kosh to talk about other channels but I think this is an educational/inspirational community, so I hope no one minds.
@thothtahuti5509
Жыл бұрын
@@ScottCalvinsClause I'm sure Noone will mind, thanks alot friend! I'll check it out ::)
@GreenHearthHomestead Жыл бұрын
That... is a nice sweater indeed
@philnolan9903 Жыл бұрын
Smashin jumper dude, nice video too👍
@coryscoffield2705 Жыл бұрын
Thanks for such an awesome video! These are all things I want to know and learn more about! Love what you do, keep it up!
@EoinReardon
Жыл бұрын
cheers lad, thanks for the support, will do.
@MrRaccoonbro69 Жыл бұрын
Your videos are always so interesting educational to me 😊
@cm4099 Жыл бұрын
Forget the chisels, get a nice set of Japanese pull or draw saws. Wonderful tools.
@Dragon_With_Matches Жыл бұрын
The more you play with it, the easier it is to set. I have an antique western wooden plane that I can set up in seconds to take super thin shavings. And I’m a complete amateur. It’s a ton of fun!
@deemdoubleu15 күн бұрын
I think what is more important is the finish left on the wood. I have seen a difference between my old Stanley and a more "modern" Lie Nielsen A2 blade which didn't quite give as good a finish to be honest.
@ryanwbl5157 Жыл бұрын
Great and informative Eoin!
@shawneiker9970 Жыл бұрын
I like this guy talented makes me wanna have my own workshop
@W4ABN Жыл бұрын
I've been interested in Japan and Japanese traditional carpentry for years. I love the sound of a plane shaving that ribbon off the wood. I haven't tried Japanese planes but would love to get one. I've read they leave such a nice finish you don't need to do any sanding before finishing work. I'd love to get a good set of chisels from Japan. Love the look of them. Now I want to pull out what I do have and make something. Thanks for sharing your videos.
@FaceFoiled Жыл бұрын
The push plane you showed there, I picked one up the other day and used it for the first time last night. Took it apart to see how it worked, how the heck to I get it lined up well now? :D B&Q did me dirty with a good deal, but no instructions ^_^
@Siriuslyyy Жыл бұрын
Soon Eoin will be smooth as a baby
@thefloatingeyeball2526 Жыл бұрын
Ooof really nice job mate 👍🏼 makes me want to start lol
@beerenmusli8220 Жыл бұрын
Really cool thing
@GoblinKnightLeo Жыл бұрын
It's worth remembering that a lot of Japanese tool technology can be explained by their relative lack of fuel and iron ore, leading to the need to economize on quality steel.
@harrytomlinson6304 Жыл бұрын
love this
@louisvictor34733 ай бұрын
Been a year, dunno if anyone told you this but dont seem anyone mentioned in these coments so, maybe not. There is a particular reason for that pulling technique which you can benefit. Their planing tables/set ups usually involve having the piece sloped down so that you can plane with a little help from gravity. The blocky nature can also help to use some techniques for pushing if you really need to where you equally de-emphasize where you distribute the power through your whole bother more evenly rather than emphasizing arm muscles (less tiring overall), while also using help from gravity and body weight, and/or skeletal strength too.
@crow9149 Жыл бұрын
Nice sweater
@mitchellmartinez3616 Жыл бұрын
You make great content. Thank you. What's the most exotic wood you've worked?
@puffyhowler615 Жыл бұрын
Who needs a receipt printer when you have a Japanese plane?
@Chlorate299 Жыл бұрын
You've made your own extra long Rizlas.
@132colinnorth4 ай бұрын
Just got shavings at 0.12 thou (3.05 micron) with an L-N 62 and an 01 steel blade sharpened to 0.3 micron lapping film and the stropped on untreated leather.
@rhia_code Жыл бұрын
I'm a new sub and though your hard work does not go unnoticed, I'm sorry but I can't help but simp 😅 any ways, I adore your work (I'm a builder, not cabby). You put so much effort into everything, and effort shows in the finished product❤ Love from New Zealand 🇳🇿 Ps. Your sweater collection is wicked
@evanrossow6150 Жыл бұрын
Needed this video about a month ago, bought a nice kanna about a year ago and was finally setting everything up. Got the job done in the end but it would have been helpful to have one more video to watch
@elcaponeholyemperorofnj1169 Жыл бұрын
You fulfill every positive Irish stereotype
@SaleemVFX Жыл бұрын
Idk anything about woodworking but I came for his accent
@jobbybohnson6818 Жыл бұрын
With japanese steel I am not surprised
@user-y127 Жыл бұрын
Love your videos. They always make me think if I should quit my software dev job and become a carpenter. One question though: where is that pullover from? It’s awesome
@sjoukeduinstra9071 Жыл бұрын
Did you invest in a better camera? (and mic but I can see that in your neck) It looks pretty good definitely better then the vertical phone camera lol
@SkippoSkippo Жыл бұрын
More close up shots would be a game changer. Great video non the less. Your going places for sure. Fair play good sir
@garrickpearson Жыл бұрын
Jealous of your accent 😂 great video!
@WhatDadIsUpTo Жыл бұрын
Must not be much sunshine in Ireland. I'm Dutch and that's about as white as it gets, but I'm easily several shades darker. Get some sun, if you can; it is good for you! I kind of like the idea of pulling sharp instruments than pushing. Much safer, I'd wager.
@mattparker1390 Жыл бұрын
Can’t beat county Naas 😉
@brianpayne-ns8il11 ай бұрын
I want one
@natereinert15728 ай бұрын
Juat to clarify, as far as i can tell the record is 3 microns (micrometers), which is actually 3 thousand nanometers. for reference if it was 3 nanometers, that would only be about 100 hydrogen atoms thick. You got to 25 micrometers thick with your final shave in the video, so the record is about a tenth the thickness
@Siriuslyyy Жыл бұрын
This tool turns wood straight into paper
@hannah_the_snake8215 Жыл бұрын
I'd suggest an air tight box maybe to help keep the wood as stable as can?
@DavidSmith-nl5jv Жыл бұрын
Keep up the great work. What part of Ireland are you in? I went there a few years ago and it is one of the best countries I’ve visited.
@CORRIGEEN71
Жыл бұрын
Co cork I think , what did you like about my country of ireland
@seanmicheal124 Жыл бұрын
Eh Eoin, I got a great topic idea for your next video, making my Eoin Reardon signature Ash Hurley 36” Kilkenny style Hurl 😂
@greevsy01 Жыл бұрын
As an engineer who uses micrometers. We say it as my crom it ter But it my be my geordie accent
@thelight3112
Жыл бұрын
American: My-crahm-met-tur
@ahhthatsjustgrand65029 ай бұрын
when you use a katana as a woodworking tool youve got it made
@Locahaskatexu Жыл бұрын
you spoke of moisture potentially warping the wooden body of the plane, but would soaking the wooden body in something like varnish work to protect it from moisture? That way you'd only need to sand down the bottom a bit to your get it back to snuff again, perhaps rub a bit of oil on for good measure and it would be fairly well protected against moisture warping the body.
@Locahaskatexu
Жыл бұрын
@Conquering Death Yeah, that would work I think. Linseed oil is more dilute than varnish, so would penetrate the fibres better I think
@Isiah405 Жыл бұрын
Hello, I am curious if you sell any of your work. I'm getting into primitive camping and love your craftsmanship. With that being said I'm needing a good camp hatchet and would love to buy one from you
@MichaelBerthelsen11 ай бұрын
Small recommendation. Never hit the iron, use a small mallet on the front or back surface of the body to seat the iron and adjust it.😉
@MichaelBerthelsen
11 ай бұрын
Also, your Japanesse pronounciation was FAR from the worst I've ever seen, quite decent.😁👍
@MichaelBerthelsen
11 ай бұрын
To adjust the sideways movement in case it's not parallel/even, Japanese masters hit the back corners of the body, rather than the steel. Usually you just sight it in, works quite well with a little practice.😊
@Maninawig Жыл бұрын
Would you use these shavings to seal the endgrains on a project?
@cheater21211 Жыл бұрын
I wonder if there is an actual use for wood shavings like that? I mean they're paper thin so perhaps ltierally as paper? Good campfire kindling at least...
@jackh8157
Жыл бұрын
Good guess, it was used for both 👍
@DevinJuularValentine
Жыл бұрын
Well, good for composting too
@garymiceli7321 Жыл бұрын
what drand is your diamond stone and holder
@ryanburtch9315 Жыл бұрын
Why did you take some off the sole of the plane?
@paulishism10 ай бұрын
Naas, county Kildare?
@whereistumble11 ай бұрын
very interesting vids....here's a YT video I found on wood shavings in Japan...incredible
@markcoetzee2002 Жыл бұрын
How are you doing Eoin? Is there anything I can pray for you about
@jwrine3631 Жыл бұрын
"Please take your receipt"
@ColocasiaCorm6 ай бұрын
3nm eh
@mikelhardin3869 Жыл бұрын
Old fashion way to make toilet paper
@vanpatterson1934 Жыл бұрын
This is plane jk
@mikelhardin3869 Жыл бұрын
I mean no disrespect what you ever but your like the Alec Steele of wood working two two would get together and make something
Пікірлер: 117
Can really see the improvement in this video. Full thumbnail nice angles framed well. You have come far in just a couple of months
@EoinReardon
Жыл бұрын
Thank you so much. I really appreciate your comment,
@fredo5250
Жыл бұрын
@@EoinReardon yeah your quality has gone up nice to see you care about your audience
@samuelcarrico6278
Жыл бұрын
Eoin is a fast learner!
You make me want to spend all my money on planes
@WalterMelons
Жыл бұрын
That’d be the dream.
@Layzieee
Жыл бұрын
Thats the plane and simple choice here
@severini8153
Жыл бұрын
Planes used to be ridicously common. I've got like 10 very usable old wooden planes for 10€ each. They just needed a bit of sharpening and a flat sole again 👍
@Crvstylvngs
Жыл бұрын
Have done it and still doing it ever since watching Eoin. Already living paycheck to paycheck I might aswell have some good tools to have fun with
@JackDittmann
Жыл бұрын
@@Layzieee ;;(99
I do like the Japanese carpentry I must admit, the self-closing joints they make are something else. They're some thin auld shavings there, they'll make your cabinet scraper embarassed to be a cabinet scraper, I reckon they'd be sound as a sort of woodsman's Rizla as well
@professorwikipedia2115
Жыл бұрын
Glad to know I'm not the only one who thought the shavings looked like kingies
The way he says "we" makes me feel like I'm working there alongside him.
My grandfather was a carpenter and I spent all my childhood and early teenage years working wood with him. He taught me everything about tools and how to sharpen them and maintain them in the best conditions. I just discovered your videos and I can't stop watching them. It brings me so much joy and beautiful memories of the amazing time I spent with my grandfather. I had forgotten how much I love the smell of those wood shavings! Can't wait to watch your next video. Thank you for sharing, Eoin 🤗
Eion, thank you for your videos, so calming and relaxing watching and listening to you, keep up the good work ❤
@EoinReardon
Жыл бұрын
Cheers. Appreciate that big time
@clivebrampton6057
Жыл бұрын
@@EoinReardon no, thank you 🙏 your videos are so good for my mental health!
Man, iv been going through alot and honestly how calming you are and how enthusiastic you sound has really helped me get through things
I have a bunch of old planes box up when we moved. Can't wait to get my barn built so I can get my work shop back. Learned a lot from you. Thanks you can always teach an old dog new tricks (67).
I love listening to him talk and I have no idea why
I love my Japanese plane! Working on the pull stroke is much easier on your back and shoulders and also allows you to work from a seated position instead of standing. Can be a great advantage for someone (like me) who is disabled.
Love your videos lad! You could be an actor in movies or tv. It’s so much more logical to me to use the pull stroke than the push stroke in woodworking. I don’t own any Japanese planes currently but I do own a Japanese pull saw that I love.
Your videos are so interesting and relaxing. I get so inspired after to fix broken things in my house, even just mend clothes or pick watercolour over digital art. Keep it up!!
I love this Irishman
Kezurouki is the name of the competitions he's talking about with the wood shavings. It's crazy watching
Great job! 👍🏼
I was watching "the carpenter life" he is an American in Japan learning traditional carpentry. And visited the craftsman making plane blades and plane bodies. It was interesting to see two different craftsmen working on a plane. But they both leave the last bit of adjustment on the plane for the user to dial in for use. There is a micro plane and cabinet scraper they use for adjusting the sole of the wooden body. But I've never seen the Japanese to oil the wood body just the blades.They like the dry wood body to glide over.
Love the video very informative and very fun
Thank you for all the great videos! Loving these long form ones. Good luck with uni you can do it!
You've stepped up your game with this vid Eoin! Great angles, properly mic'ed up, lovely lighting. I'll miss the cheeky phone being propped up, but I'm far more excited for what's to come. Please keep up the great work 🤙🏼
Joiner from Germany here, we will set our planes differently from this method. We glance along the bottom of the plane and eyeball how far it sticks out, then you hit the blade until it is even and sticking out just right. It takes a while to get the hang of but since most planes are made from wood here around you have to set them every time you use them. Becomes second nature real quick and it takes mere seconds after a while. I prefer wood planes because they are much lighter than steel ones and when running a plane along a piece of wood a couple hundred times a day, that adds up quickly. As a bonus you can run maintainance on them in your wood working shop.
I have one of those, thanks for your detailed explanation on setting it up. I've got another for shaving bonito "Katsuo" fillet blocks that are hard as wood. Your sharpening explanation will hopefully help me get good shavings from that instead of dust. Cheers!
I just stumbled across your channel, and am so happy I did. Your work reminds me of working with my grandpa on the farm in 1980. Thank you Eoin for sharing your skills.
It’s so wonderful how we came up with such simple technology yet it works so beautifully.. easy thing about this world is if it’s not broken, why bother fixing it! I love that you focus on hand tools, so entertaining and I really feel like I’m learning something valuable!!
I have a plane (the normal metal kind) kicking around, I've never mastered how to use it properly... you've inspired me to dust it off and have another go!
the quality of everything about this video is great! incredibly relaxing and informative content thank u for doing what u do
Great video. Enjoyed the look into the delicate art of Japanese planes
Incredible work, didn't even know about any of this and i still feel super impressed, i love these videos :)
Pretty innovative workbench light
you have gotten me into wood and technology thank you! and great video 💪🏼
I got my caprtenty and joinery qualifications as a young man but ended up as a chef because of, life. I don't want to go off to commercial woodworking but you are absolutely reopening a passion I had as a child/young man, I have very few tools and it is quite difficult to come across (decent) old hand tools as I've discovered as I look for them second/third/fifth hand, as there's no way I could ever afford even basic tools new, but I'm slowly trying to build enough of a collection to be able to do some actual wood work again! ::) I love the longer form videos and thank you so much for reawakening an old passion, I don't like power tools but you have reminded me that I don't HAVE to use them, I can truly build with my hands... once I can finally get some proper tools, I can't make much with a rust based, snapped hand saw, a snapped hammer, no materials and a leather punch.... but one day, so again, thank you friend, from New Zealand ::)
@ScottCalvinsClause
Жыл бұрын
I'm in the same boat. It can be really tough to work up from nothing with no capital. I've found Rex Krueger's series, "woodwork for humans" to be pretty helpful and inspiring. I know its not kosh to talk about other channels but I think this is an educational/inspirational community, so I hope no one minds.
@thothtahuti5509
Жыл бұрын
@@ScottCalvinsClause I'm sure Noone will mind, thanks alot friend! I'll check it out ::)
That... is a nice sweater indeed
Smashin jumper dude, nice video too👍
Thanks for such an awesome video! These are all things I want to know and learn more about! Love what you do, keep it up!
@EoinReardon
Жыл бұрын
cheers lad, thanks for the support, will do.
Your videos are always so interesting educational to me 😊
Forget the chisels, get a nice set of Japanese pull or draw saws. Wonderful tools.
The more you play with it, the easier it is to set. I have an antique western wooden plane that I can set up in seconds to take super thin shavings. And I’m a complete amateur. It’s a ton of fun!
I think what is more important is the finish left on the wood. I have seen a difference between my old Stanley and a more "modern" Lie Nielsen A2 blade which didn't quite give as good a finish to be honest.
Great and informative Eoin!
I like this guy talented makes me wanna have my own workshop
I've been interested in Japan and Japanese traditional carpentry for years. I love the sound of a plane shaving that ribbon off the wood. I haven't tried Japanese planes but would love to get one. I've read they leave such a nice finish you don't need to do any sanding before finishing work. I'd love to get a good set of chisels from Japan. Love the look of them. Now I want to pull out what I do have and make something. Thanks for sharing your videos.
The push plane you showed there, I picked one up the other day and used it for the first time last night. Took it apart to see how it worked, how the heck to I get it lined up well now? :D B&Q did me dirty with a good deal, but no instructions ^_^
Soon Eoin will be smooth as a baby
Ooof really nice job mate 👍🏼 makes me want to start lol
Really cool thing
It's worth remembering that a lot of Japanese tool technology can be explained by their relative lack of fuel and iron ore, leading to the need to economize on quality steel.
love this
Been a year, dunno if anyone told you this but dont seem anyone mentioned in these coments so, maybe not. There is a particular reason for that pulling technique which you can benefit. Their planing tables/set ups usually involve having the piece sloped down so that you can plane with a little help from gravity. The blocky nature can also help to use some techniques for pushing if you really need to where you equally de-emphasize where you distribute the power through your whole bother more evenly rather than emphasizing arm muscles (less tiring overall), while also using help from gravity and body weight, and/or skeletal strength too.
Nice sweater
You make great content. Thank you. What's the most exotic wood you've worked?
Who needs a receipt printer when you have a Japanese plane?
You've made your own extra long Rizlas.
Just got shavings at 0.12 thou (3.05 micron) with an L-N 62 and an 01 steel blade sharpened to 0.3 micron lapping film and the stropped on untreated leather.
I'm a new sub and though your hard work does not go unnoticed, I'm sorry but I can't help but simp 😅 any ways, I adore your work (I'm a builder, not cabby). You put so much effort into everything, and effort shows in the finished product❤ Love from New Zealand 🇳🇿 Ps. Your sweater collection is wicked
Needed this video about a month ago, bought a nice kanna about a year ago and was finally setting everything up. Got the job done in the end but it would have been helpful to have one more video to watch
You fulfill every positive Irish stereotype
Idk anything about woodworking but I came for his accent
With japanese steel I am not surprised
Love your videos. They always make me think if I should quit my software dev job and become a carpenter. One question though: where is that pullover from? It’s awesome
Did you invest in a better camera? (and mic but I can see that in your neck) It looks pretty good definitely better then the vertical phone camera lol
More close up shots would be a game changer. Great video non the less. Your going places for sure. Fair play good sir
Jealous of your accent 😂 great video!
Must not be much sunshine in Ireland. I'm Dutch and that's about as white as it gets, but I'm easily several shades darker. Get some sun, if you can; it is good for you! I kind of like the idea of pulling sharp instruments than pushing. Much safer, I'd wager.
Can’t beat county Naas 😉
I want one
Juat to clarify, as far as i can tell the record is 3 microns (micrometers), which is actually 3 thousand nanometers. for reference if it was 3 nanometers, that would only be about 100 hydrogen atoms thick. You got to 25 micrometers thick with your final shave in the video, so the record is about a tenth the thickness
This tool turns wood straight into paper
I'd suggest an air tight box maybe to help keep the wood as stable as can?
Keep up the great work. What part of Ireland are you in? I went there a few years ago and it is one of the best countries I’ve visited.
@CORRIGEEN71
Жыл бұрын
Co cork I think , what did you like about my country of ireland
Eh Eoin, I got a great topic idea for your next video, making my Eoin Reardon signature Ash Hurley 36” Kilkenny style Hurl 😂
As an engineer who uses micrometers. We say it as my crom it ter But it my be my geordie accent
@thelight3112
Жыл бұрын
American: My-crahm-met-tur
when you use a katana as a woodworking tool youve got it made
you spoke of moisture potentially warping the wooden body of the plane, but would soaking the wooden body in something like varnish work to protect it from moisture? That way you'd only need to sand down the bottom a bit to your get it back to snuff again, perhaps rub a bit of oil on for good measure and it would be fairly well protected against moisture warping the body.
@Locahaskatexu
Жыл бұрын
@Conquering Death Yeah, that would work I think. Linseed oil is more dilute than varnish, so would penetrate the fibres better I think
Hello, I am curious if you sell any of your work. I'm getting into primitive camping and love your craftsmanship. With that being said I'm needing a good camp hatchet and would love to buy one from you
Small recommendation. Never hit the iron, use a small mallet on the front or back surface of the body to seat the iron and adjust it.😉
@MichaelBerthelsen
11 ай бұрын
Also, your Japanesse pronounciation was FAR from the worst I've ever seen, quite decent.😁👍
@MichaelBerthelsen
11 ай бұрын
To adjust the sideways movement in case it's not parallel/even, Japanese masters hit the back corners of the body, rather than the steel. Usually you just sight it in, works quite well with a little practice.😊
Would you use these shavings to seal the endgrains on a project?
I wonder if there is an actual use for wood shavings like that? I mean they're paper thin so perhaps ltierally as paper? Good campfire kindling at least...
@jackh8157
Жыл бұрын
Good guess, it was used for both 👍
@DevinJuularValentine
Жыл бұрын
Well, good for composting too
what drand is your diamond stone and holder
Why did you take some off the sole of the plane?
Naas, county Kildare?
very interesting vids....here's a YT video I found on wood shavings in Japan...incredible
How are you doing Eoin? Is there anything I can pray for you about
"Please take your receipt"
3nm eh
Old fashion way to make toilet paper
This is plane jk
I mean no disrespect what you ever but your like the Alec Steele of wood working two two would get together and make something