CRF actions are supposed to be fed from the mag. I've owned a few Pre64's in my 77 years. Arguably the best hunting rifle ever made.

I have a 1954 Model 70. The two screw holes on the left side of the receiver are from the factory and are for a side-mounted peep sight. My rifle has the same holes but are filled with plug screws.

@RussellKibbe

5 ай бұрын

Do not rebarrel please. I beg you, the front sight is milled into the barrel,go to Brownells you can get the hood. I restored my father's 1957 model 70 it worth 1200 or more keep shooting, Russ from Ky

That is in exceptionally good shape for being a almost 70 year old rifle, when folks bought those, they didn't buy them to sit on a mantle, they are through and through deer/elk/whatever you want hunting rifles! Fantastic, detailed and thorough walkthrough of the rifle!

@brianinthewildcolorado2778

2 жыл бұрын

Going to change scopes on it and see if I can get the groups a bit tighter and blast a deer with it

@antoniomanuelrodrigues-sz7lb

Жыл бұрын

​​@@brianinthewildcolorado2778Scope has NOTHING to do with YOUR grouping.!!!

That barrel looks great for its age

I have an 1893 Marlin that was produced in 1901 chambered in 44-40 and it does need barrel work but it is a nice wall hanger 😁. I would definitely take yours on a hunt. Thanks for the video.

@brianinthewildcolorado2778

2 жыл бұрын

Thanks for the comment Keith

Brian... Great Video, I'm Subscribing! Congrats...! GREAT Find👍for $250.00! Summer 2022, found a post-war 1948 Model 70 (NRA 88-90%) chambered in .30-06 Springfield... All OEM parts present... front sight hood, barrel sight dovetail filler blank... and even plug screws for left side of receiver, factory drilled holes for rear sight. Prior Owner changed trigger... (OEM box of trigger parts did not come with the rifle) for a Timney (very nice trigger) and new Leupold VX-Freedom 3-9x40mm SFP Duplex Reticle w/Talley rings... Will upgrade to Leupold VX-6HD 3-18x44mm SFP Illuminated Red TMOA Reticle. Interesting, original metal butt plate (hard!) on excellent condition furniture. Have Not Shot the rifle yet, but I won't wait 10 years like You! Found it really interesting how you performed diagnostic borescoping the barrel to access condition... Excellent comments, I learned what to look for when I perform the same procedure to my $1,000.00 (fair price for condition in California) storied Winchester Pre-'64 Model 70... The Rifleman's Rifle...! Good Judgement... Keep Your Rifle As Is; Still a Great Shooter and the Deer🦌 Won't Know the Difference! Cheers! Gung Fu Cowboy San Francisco Chinatown

For an old gun, I was super impressed. With a new optic that’s gonna be a deer slayer

@brianinthewildcolorado2778

2 жыл бұрын

Optic is in the works. Wanna see how it shoots with some hand loads and better optics.

@antoniomanuelrodrigues-sz7lb

Жыл бұрын

Optics has NOTING to do as the gun shoots.!!! CONTROL FEED, it means that it takes a round FROM THE MAGAZINE, never drop a round IN FRONT of the bolt.!!! You can BREAK the extractor claw if you, WRONGLY, insert a round IN FRONT of the bolt, FORCING the extractor claw to jump over the "rim" of the case head.!!!!!! THAT'S for PUSH FEED.!!!

The two holes drilled on the side of the action was probably a Lyman 48 WJS receiver peep sight!

@antoniomanuelrodrigues-sz7lb

Жыл бұрын

OF COURSE...

@edwardabrams4972

Ай бұрын

You are correct🙌 that’s what is on both of the 2 I bought a couple years back

I have a 1959 pre 64 264 win mag that has the exact same butt plate / pad on it. I believe it is factory and it would make it a westerner! Put your crosshairs just on the bottom of the bullseye to get a group when the crosshairs cover the Bull.

The claw extractor is supposed to feed out of the magazine

@brianinthewildcolorado2778

2 жыл бұрын

Yeah I remembered that half way thru the shooting session, you’re 100 percent correct. Thanks for the comment Scott

@antoniomanuelrodrigues-sz7lb

Жыл бұрын

​@@brianinthewildcolorado2778 Sorry to say that, Sir, but it seems, that you are making a video, knowing zilch about the subject you are talking about... For your info. those two holes in the rear side of the action, are factory made, (and pluged), for a RECEIVER SIGHT.!!!

The way you run that action hurts my heart.Someone probably already mentioned that your Model 70 came with a gorgeous metal butt plate. The add on recoil pad was done pretty badly, which halves the value but I sure would have grabbed it. I saw one similar just a couple weeks ago, priced at $900. That barrel will shoot fine. You should see some of my rack grade M1 Garands that still meet their original spec for MOA.

Good oil and shoot afew fmj's your Good I have a 1952 308 shoots dime size groups at 100 yds factory federal 168 gr not shot hand loads yet

@jeramyw

6 ай бұрын

First year of the 308. Nice! However, I don't think I've ever seen fmj 270

There's 3 types of bolts for the model 70. Controlled feed, push feed, And push feed with extractor

How exited can you be really you bought it 10 years ago and just going to shoot it 😱 I buy one and I go immediately that weekend 😅 congratulations on your amazing find

Dig the rifle brother

Receiver sight mounted on the side.

Nice I got a good deal on a pre 64 but not as low as you did mine is 300 H&H though and it shoots great it cloverleaf 180 grain bullets at a 100 yards

@brianinthewildcolorado2778

2 жыл бұрын

That’s awesome, thanks for the comments Scott

@scottscheuerman6170

2 жыл бұрын

I live here in Colorado also my model 70 was made in 1955

They probably had a Lyman rear adjustable peep site it mounts with two screws on the left side of the action.

Love the pre 64s. I’m looking at a 4digit 06 right now.

@jeramyw

6 ай бұрын

One of my dream guns there. It should have a stripper clip guide.

Hope you didn’t screw up the extractor ALWAYS LOAD FROM MAGAZINE!!

That's a controlled feed. It's supposed to pick the shell up from the magazine. By loading a single e you're trying to close the bolt extractor over the case

I can't wait to get mine

The LH rcvr side holes was used to mount a peep sight. Dat'll make the iron sites more accurate. And it'll make the gun look more nicer. As u know, military used peep sights during the war bc. it's of the accuracy and less vulnerable than the buck horn type. Try it. U'll like it

Its a control feed not a pushfeed you must put the cartridge in the magazine.

Lucky

I have a 1st year 4 digit model 54 in 3006 that shoots into 1 ragged hole at 100 yds Work up a load for that 70 and you will have a shooter sub moa for sure.again congrats

do you know the labor intensive process to make that barrel. that was hands on not like today

@jeramyw

6 ай бұрын

What I like is that the front sight base is milled into the barrel. Same as the bolt handle which is the same piece of steel as the bolt.

Those two holes were from the factory to mount a peep sight

sight housing milled in barrel

The but plate would have been steel

Yiu need to shoot various bullets not just 1 type to get your best group Many rifles are particular to a specific bullet like the partition accubond or barnes

Got an model 70 pre 64

I have a model 70 3006 built in 1957 I am loading 180 Sierra pro hunter over 55 grains of H 414 3 shots touching at 100 yds my barrel is worse looking than yours due to the manufacturing process at the time

@tedpfenninger4972

Жыл бұрын

I have a '57 vintage model 70 30-06. Like you I like H414. Good balistics, and it sure flows nicely though a measure.

its not a original butt plate... re metal

Peep sights made by Lyman will cost you more than the Rifle, Nice rifle ,clean it shoot it.

1953 30-06

There is nothing wrong with that gun , it’s just fine.I’ll give you what you think is a fair price for it as is.Seriously.Just let me know.

250$ !!?? It's a cruel prank if you are joshing us.

I’ll give you 500$ for it