I experiment with double sided mini waffle trivets on my CNC
This is an older video, that I thought I would upload. There may be some value to it. Hand held Camera is not so good.
Жүктеу.....
Пікірлер: 11
@jameselliott14872 жыл бұрын
Cool
@Regimepe8 жыл бұрын
a great job
@steinie44
8 жыл бұрын
+Reginaldo Pereira Thanks.
@n8guy8 жыл бұрын
Cool project! Since you're drilling through holes into the waste board anyway, you could just drill 2 more holes around the circle (90° to your current holes), then flip the part, rotate it, and index in those holes directly. But yeah, cool end product!
@steinie44
8 жыл бұрын
+n8guy Thanks. If doing one at a time, no problem. Doing same side on say 4, you loose your x/y 0.0 Or if 2nd side is done at a later time.
@n8guy
8 жыл бұрын
+Jim Steinbrecher In the case of multiples, you could reference the entire sheet in the same way you did, but then for each trivet, do what I suggested. As for retaining X and Y, as you said, that would mainly come into play if you were going to cut the 2nd side at some other time. Either way, cool project!
@steinie44
8 жыл бұрын
Thanks
@MRrwmac8 жыл бұрын
I know you did this experiment for a future purpose. I'll be interesting to see what that is? Thanks for sharing.
@steinie44
8 жыл бұрын
+MRrwmac Thanks
@CharChar8768 жыл бұрын
Would turn into a nice soap dish for homemade soaps. They need to drain and not sit in water like store bought soaps. I am wondering if you do a first set up and just make out a template with your markings on it for where you line it up for flipping it over.
Пікірлер: 11
Cool
a great job
@steinie44
8 жыл бұрын
+Reginaldo Pereira Thanks.
Cool project! Since you're drilling through holes into the waste board anyway, you could just drill 2 more holes around the circle (90° to your current holes), then flip the part, rotate it, and index in those holes directly. But yeah, cool end product!
@steinie44
8 жыл бұрын
+n8guy Thanks. If doing one at a time, no problem. Doing same side on say 4, you loose your x/y 0.0 Or if 2nd side is done at a later time.
@n8guy
8 жыл бұрын
+Jim Steinbrecher In the case of multiples, you could reference the entire sheet in the same way you did, but then for each trivet, do what I suggested. As for retaining X and Y, as you said, that would mainly come into play if you were going to cut the 2nd side at some other time. Either way, cool project!
@steinie44
8 жыл бұрын
Thanks
I know you did this experiment for a future purpose. I'll be interesting to see what that is? Thanks for sharing.
@steinie44
8 жыл бұрын
+MRrwmac Thanks
Would turn into a nice soap dish for homemade soaps. They need to drain and not sit in water like store bought soaps. I am wondering if you do a first set up and just make out a template with your markings on it for where you line it up for flipping it over.
@steinie44
8 жыл бұрын
+Elizabeth Dettrey Thanks, that might work.