Looks awesome! I think you need a foot rail around the bar for your guests.

Working on your Jeep or building your boat, it's always very interesting to watch your videos and see how creative you are and working precisely !! Congrats. Herve from France.

Excellent name for a party boat. Nice design, well executed.

It reminds me of those Dos Equis commercials. I don't always drink beer when I am on a boat, but when I do it's on one that Ultimate Rebuilds bult.

I admire how your visions become reality. Really creative.

Hi Zach, it looks awesome! Don´t worry about the bubbles. I agree with you about painting the seat feet in black 😉👍

You know it's a party boat when the captain has 4 drink holders🎉

Mi gee you remind me of Xzibit the way you pimp these jawns. The work be incredible ya heard?

Water patrol is going to love the name on that boat😮

Awesome to see how much more confident and thorough you are in your videos now vs when you started! Keep up the great videos! Excited to see this one on the water!!

Wow, great job Zach! I'd think it is a custom ordered high end boat if i saw it around!

Always nice to see a project coming along well.Thanks for sharing and taking us along

For the holes you should use uv resin to fill and dry it with uv light in seconds.

Your bubbles makes it sparkling vine

Yes! Thank you for changing the A to an O. That was bothering me too lol

Would it not have been possible/potentially more unique to burn an emblem into the butcherblock using a stencil of sorts and black powder? Doing it before epoxy would leave a very nice custom look. Something I've seen people try and always thought it'd be cool to incorporate into a boat build. Love your videos, man. Keep them coming!

You build amazing stuff.. great job yet again

Make a shuffleboard game out of the leftover butcher block circles!

looking sharp!

WOW, you're getting really good at this. Keep it up.

This build is going to be incredible when it's done. It's a great start so far.

Need a footrail for the stools, they're a bit high and the peeps will appreciate them. If the bubbles bother you drill a tiny hole and fill with a hypo needle. I don't think painting the seat posts is a big deal, by the time the fence is they won't be as noticeable. And painted they may become a pain with feet rubbing on them, etc. A nice sized LiFePO4 battery bank would be nice, check out jag35 and battery hookup. Being able to runs lights, tunes and maybe even a few small fans for hours w/o toting a ton of lead around is nice. Looks great!

@JP-jq1qx

Ай бұрын

What material for the rails? Brass?

I love the boat builds!

The name is fantastic Zach, I can already feel this will be the best one yet.

I'd definitely recommend keeping the volt gauge. Useful for running the radio or such while the engine is off without risking draining the batteries.

@JP-jq1qx

Ай бұрын

Ya, mount it to the front console door.

Great job!

As always, Zach, you are killing it for a young guy. You are very talented. Keep up the good work and awesome content.

Sick build!

What a cool looking boat. Nice job.

Love the BisforBuild reference in the title - yes you were doing this way way first.

That looks amazing!!!

Add some vertical curved brass rails to the front of the bar, like you see for a waitress station at a real bar!! That would be unique! DO it NOW! 🙃

It's really looking great !!!!!

It’s so inspiring to see. It makes me want to build my own pontoon sometime. Love the bar setup!

Zach, if you like it and it turned out like you like you want it that's all that matters I think it looks great

Turned out great!

Perhaps @Aquaholic needs to tour Aqua-Holic once it's finished. 😁

Looking good so far

Fantastic! Can't wait to see the finished boat.

looking good!

What would you think about mounting the voltage gage to the front console door? This would be out of the way, but the door is where you would go to first to service or check on the batteries. Then you could mount the fuel gage in front of the driver.

Love everything about it, keep up the good work!

Im really liking this. How about foot rests around the bar

SUPER COOL.

I'm guessing that the butcher block was still fairly green wood if they made it for you. Would it make sense now to sand it right down and live with it raw until it dries out a bit in the weather for a season then sand and redo all the fancy paint and epoxy? Not my area but bubbling wood just seems like it's too new.

Love the vids, keep em coming

Nice...

super nice

Man i think its time for a garage door bug mesh lol

Are you going to attach drain tubes to the cup holders for the Captain that lead out of the console? It looks like it has fittings for them, and otherwise liquids might end up on your electronics.

You need to buy one of those blow up paint booths for a clean space they use the fan blower that they use for those jump houses. definitely check them out if you haven't and I believe they are pretty affordable.

Looking good Zach! I'd prob just add the fuel gauge down by the speakers on the lower part of the helm...

Looks awesome, you are a very creative person, keep it up, love the videos

The boat is looking awesome. You're a multi talented man. One thing I would have done is face the logo toward the controls so you can read it.

You could sand down the epoxy top (just to smooth out the epoxy, not sand all the way through) then do another layer or just do an oil finish over it.

Great job! Are you putting a foot rest around the bar? That would be a nice touch.

@ultimaterebuilds7127

Ай бұрын

Yes! Definitely will need a footrest

@JP-jq1qx

Ай бұрын

Ya, maybe brass? that would be awesome!

yeeeeee

Should have been AQUA-HAULIC !

Here you go

With as much epoxy you have on there, you would be well off taking a block sander and blockiung the top of that table flat. Then just grab some cutting compound and buff it after. will make an incredibly flat and smooth finish. Espacially seeing as you have a month or more to make it right.

Awesome videos, love to see what direction you take things during your builds. Question where did you get that steering wheel for the helm? Love that ..keep up the good work.

Stool color looks fine. Black might standout too much.

I know the rough edges are covered when the cupholder inserts are inserted but.. You should really invest in a cup holder size hole saw for this purpose especially if you mean to do more of these for-profit builds in the future.

Use USHIP for delivery

Maybe match the stool to the seat color. Black attracts heat.

That bar/helm is awesome!!! Can you build me a pontoon boat? Or maybe sell me this one?

Add LED lights that blink to the beat of the music.

Can I suggest you put the handles that adjust bar stool height in the same direction in relation to the boat vs in relation to the seat. For instance, have all the handles point to the back of the boat, instead of on the right side of the seat for all of them.

You got mad skills man. Also i hope all your friends subscribe and watch the videos.

🤝

Put foam around the door. The subs will rattle it like crazy

The Bubbles are from the moisture, that is trapped in the wood. You should not have sealed it completely. It might be worth a try, if you remove the epoxy from the surface, that is hidden inside the cabinet anyways.

Dont forget the foot rests

Love your vids. Hey what about a flag with your boat name on it?

Zach, can you advise where you got your steering wheel? Love it. Would love to swap out my pontoon boat wheel with that one...

You should do an RV build where you say this is my dash/bar lol jk

Ya

Hey where do I get a wrap for my jet sky. I saw your jet skit build and you got a very nice wrap for it

DO A RV

Probably don't want to have the shop fan going while you're pouring epoxy.

A 3rd wheel rv

When are you building a tiny crib on a pontoon

Nothing says "Hey PoPo over here like the name of ur boat, good luck pal. Take it from an ex boater who dealt with the water cops, all's they want is that pretty green cash. Here comes the Judge would be a better name lol

Where is he getting stencil?

Paint the stools

Is there enough margin to make commissioned boats?

You needed to seal the wood first before you painted on the logo.

Will the real aquaholic please stand up!?!

@iVolkswagen

Ай бұрын

AquahAlic

Expecially? 🤨

Dont get me wrong I like the logo… But AQUAHOLIC is a YT channel 🤣

No offense but Aqua-hullic would of been better lol

Another music montage....... yay 😕

It hurts me that he spelled auqaholic incorrectly 😢

@clarkalicous

Ай бұрын

Nvm he fixed it lol

@king812345678

Ай бұрын

He fixed his, but yours is still spelled wrong

Imagine a Karen who smoked 2 packs of Newports for 20 years, quits and 6 months later hates smokers. That’s you with your alcohol comments. Projection

Build a camper

I hope you get help with your alcoholism. Life's too short to waste it killing yourself with alcohol.

@byronl.kennedyiii5477

Ай бұрын

Really?

@Gramps83

Ай бұрын

@@byronl.kennedyiii5477 Yup. If someone has to incorporate alcohol into their build, they have a problem. It's okay to admit it.

@jasonbanks5664

Ай бұрын

@@Gramps83 You are the only one bringing up alcohol. In case you don't know, "Aqua" means WATER.

@Gramps83

Ай бұрын

@@jasonbanks5664 Those aren't water bottles. Don't be naive. Also, Aqua is a color.

@longjohn77

Ай бұрын

Imagine being your age and thinking you have the right to tell anyone how to live their lives. Pathetic ​@@Gramps83

Love pretty much all your work, but the name and logo are pretty cringe IMO. I get being young and excited about drinking and fun, but there are a million much classier things you could have done.

@webberfan1234

Ай бұрын

Sound old

@jamessmith3741

Ай бұрын

Aqua-holic means addicted to water. Get over yourself. You’re making us older folk look bad.

@Gramps83

Ай бұрын

@@webberfan1234 comes with maturity. You'll find out one day.

@Gramps83

Ай бұрын

@@jamessmith3741 Those are not water bottles. Also, Aqua is a color, does not mean water.

@-NotABot-

Ай бұрын

Okay boomer

I like the name! It is a worthy addition to the Red Neck Yacht Club.

Perfect time to put a round 🛟 thing for the "O"!??

@AQUAHOLIC