In the immortal words of Derek from VGG “help me understand” how Danny can even concentrate and get anything done! “And I ain’t kiddin’ ya”.

@jasontengan1233

Жыл бұрын

No doubt, she even got cute feet!

You got a new professional shop and new man, Travis still scrounging in junk yards!! Way to Go!!

Nice ls3's you have there. I had an ls2 .030 over with a 4.1 stroker crank(418). Gmpp ported ls3 heads, stock intake w fast 98 tb. 11.7 pistons. I had a a cam guy spec me a cam to run 93 octane pump gas. 235/250 600lift 113+4 good street cam with a 3600 stall. Actual stall at the track was 4000. 6.9@98mph 1/8 mile. 1.52 60ft. I am putting in a new ls3 in the 98 T/A this time. Using the same crank in the ls3(427CID)with a zero lash solid roller with 700 lift speced by Cam Motion for 93 octane, Fast mid runner intake and 102mm tb, 11.7 pistons, Dart pro1 ls3 heads. These heads make 700+ hp N/A on a 440 cid engine and work really well on NOS, 900 hp. Red 98 T/A ,3600 Yank, 4:10 Moser 9", Hoosier 16/295/50(10.5x28)DDR2. All the suspension mods too. 3300lbs

Danny was right about the combination of parts that can be used to create the desired amount of Horsepower. If longevity is what you want a more moderate build will get it for You. Who needs 850 HP to get to the market on a daily trip. A 9.5 piston set with the right cam and aftermarket goodies, on that block will get you 650 at least and you can still get it to run on mid-grade gas.

I like that the engineers have their own "clean room". Very cool.

Liv is like a lovely young gypsy lady version of a Daisy Duke. That is so sexy to see her working on an engine block. She's got the greatest personality and she seems quite excited to work on those engines. You go girl. Hope someday you'll find that muscle car you've always wanted. 😀😉😊🥰😆

I still love my Chevy old school Big Blocks

my mechanic is building me a 355 chevy w/ transmission also gonna have to up grade the wiring due to all upgrades, like the music, headlights, vintage air, motor for convertible top. the car is gold, black and chrome 3pc. rims , have re-chrome the numbers.

Cant wait for the build vids. Congrats on scoring two.

If your going to stroke it make sure you get some H beam rods @ 6.125 for less piston to wall friction. Lot's of shelf pistons, recessed valve slots on flat tops made for this. 4.1 and 4.0 stroke is common up to about 12.1 compression that can run pump gas with a good Cam designer like Cam Motion cams and others. They can rev up past 7500 rpm with power if you like. A good cnc port job would be worth it being stroked. Just grind reliefs at the bottom of the cylinders for the rod bolts to clear. Even the stock Ls f-body pan has a slot at the front to make room for rod clearance that needs to be opened up about .040 deeper for the larger rod bolts that come on H-beams. It's a lot easier than it sounds with the blocks being aluminum.

That's. So nice. The blocks are to. And thumbs up for doing it with a WAGON. Instead of a 50 K . Race Truck.😁💯..

Yep, go check em out Liv. You rock hard girl! Luv ya!

Is that a bamboo ceiling in the wagon? I've never seen that done before but it fits that car's vibe perfectly! Neat idea. 👌Those blocks are great, what a find! I can't believe how light they are!

@T0tenkampf

2 жыл бұрын

Popular vw surf van mod, cool to see it used in another platform

Awesome pick up of the engine blocks. Good thing they're aluminum or they could have broken the vintage tailgate door on the wagon. Good for you!

@jeffreybiscoe6

2 жыл бұрын

pain in the ass to replace if I remember from watching my Dad 40 years ago ,I think.

I've never commented on here before, but nice score.I like both your ideas.

I'd love to have two Ls3 blocks. Good job guys.

These videos keep getting better and better. 😀

Nice score! Build it N/A Liv, it's different! His build is gonna be sweet to

Paint one of them red and put it in Grease! 😎

The last three's boards a little bit bigger than 4 in, From the factory, the LS3 comes with a 4.065-inch bore, 6.098-inch rods, and a 3.622-inch crank. This yields 6.2L or 376 cubic inches.

There is a wrecking yard here that sells ANY engine for $200...from a 2.6 Mitsubishi in a Chrysler K-car to diesels, and that includes the LS stuff (which I have no interest in) ..they even had a 240ci 6 cyl in a 71 Ford pickup....that is IF you can get there as soon as it comes in, the late model stuff goes FAST. I picked up a 4.0 Explorer engine and a roller cam 302 for under $400 Im using them for builders but both were in running condition. Any transmission is $125..from Turbo 350s and A-500s to Allisons and hybrid transmissions.

@pmotorsports8276

2 жыл бұрын

Location?

HAPPY DAY !

I'm not a ls guy but I do like a ls that is turbid they make crazy power and are so reliable that's a fact but I never seen one that was really bad ass ran pure N/A that impressed me I've also seen nitrous ls motors that run good I'm not knocking them buy no means I'm really a big block guy but a LS is not out of the question. Would love one with twin turbos

HELL with the engine blocks how about them shorts and smile, Beautiful.

looking forward to these built for Speed

If I had the money I would definitely use em to for the 2 Canadian Muscle Cars 🇨🇦 (like the 6.2L LS3 with factory ported cylinder heads, an upgraded cam, and a ported factory intake manifold for the 68 Beaumont SD and the 6.2L LS3 based 408 Stroker with ported factory cylinder heads, upgraded cam, and a GM LS single plane intake with a Holley Terminator EFI for the 66 Acadian Canso SD).

Great find!

Blessed

Very cool Olivia My Ford engine is only 545 ci N/A aka 9.0h

2 clean slates for something awesome 👌

@pmotorsports8276

2 жыл бұрын

Clean slates 😉👍

I feel like all the videos I’ve seen you guys are forever searching for LS blocks but I don’t think I’ve ever seen you guys do anything with them what’s the projects 🤷‍♂️

@shadetreemotorsports

2 жыл бұрын

Ya,she's got more motors than cars..... oh wait..so do i.lol.

Nice rear bumper

Can’t wait to see more on these. I know you probably don’t want to talk money but I’m curious as to what a good deal is on something like that. It seems as though those are hard to come by.

Two extra engine stands,and Travis has none 😂

👋

Cool video, not sure what a smoken good deal is for those blocks, take a guess and say 400 each? you can tell I have never bought one lol

Let’s Goooo Brandon 🇺🇸💪🏼 America 🇺🇸

What casting number are the heads? I’ve got an aluminum 6.2 in my Silverado with 823 heads. Hoping the motor outlasts the truck so I can swap it into something

WOO SLAYER CAMARO!!!

Sweet!

Guys the Tempest, please, talk about building suspense. OMG

@GnarlySpeedShop

2 жыл бұрын

Tempest videos coming in the next few weeks! You’re gonna be thrilled when you see the progress.

It looks like there's a crack coming off the second chamber on that head. Probably an easy fix with a welder, though.

Nice Liv 👍🏻

So LS3 even, nice. I am looking for an LSA block myself but not going to be in a hurry

@aphil4581

2 жыл бұрын

Havin the oil squirters on the ls9 is a huge plus for cooling and oiling the pistons and walls if your using a power adder.

@fernandohernandez6655

2 жыл бұрын

I have an LSA complete with 6l90e and accessories for 8500$ Southern California

@taylorsrus9543

2 жыл бұрын

Make sure you check the bores good, 3 people in my orbit have had LSA blocks with cracked sleeves and all 3 cars ran perfect when found.

@T0tenkampf

2 жыл бұрын

@@fernandohernandez6655 lol thanks man but I guess I'm looking for a cheap LSA shortblock in the Texas area...your piece is too fancy for me!

@T0tenkampf

2 жыл бұрын

@@taylorsrus9543 wow, good to know

Damn, this is the first notification that KZread has sent me for your channel in months ! Hell you have a New Boyfriend and everything ? You seem very happy ! God Bless. I'm gonna catch up on your videos. ✌️💙🎵 From STL MO

@GnarlySpeedShop

2 жыл бұрын

I’m very happy. :) Thank you for watching!!

That front cam bearing is wiped! look at the scratches it!

@JR-uy3zo

2 жыл бұрын

20:38 said missing the bearing..

what engine blocks?

Build a 364 3.905 x 3.8 with ls7 titanium 6.076 rods and 1.264 ch 1.2 mm1.2 mm 3 mm ring pack with napier 2nd ring a 706 heads and a 2.02 valve and a 107.5 in lca and 112 ex lca 108.5 lsa 240 in 242 ex with 10.5 tot 1 cr.I will machine it for you for free.

Steve Austin's Broken Skull!!!!

She looks awesome with a few more lbs on her

Is Danny the new replacement for Travis? I didn't know there was a new boyfriend. I like him much better, and.... Liv is still absolutely adorable!

6,2 blocks make girls smile😁😃👍👍🇦🇺

Don't forget to delete the afm dod setup

Where’s Axle?

where's Travis?

@GnarlySpeedShop

2 жыл бұрын

Check out his channel: Travis Black

@scotty162

2 жыл бұрын

@@GnarlySpeedShop thanks

You're a big YT Star now and must dress and act accordingly. Please do yourself a favor and get some real sunglasses like Persol's or at least Ray Ban.

@GnarlySpeedShop

2 жыл бұрын

I’m not a YT star. Going to keep dressing and being authentic to myself.

So tell use what you paid for them I hope you guys are not like the other shows and don't tell use

I have a new girlfriend and she is you.

and dont ask permetion to talk about stuff just do it good job girl he's a bonehead like travis

are you guys stoned, Don't let that bonehead corect you speak up girl you know what your doing