Bro... This might be your BEST video yet!!! BTW, you stole that rig at $6K. Looking forward to the "semi" series. -Andy in St-Albans.

@ARuralVermonterQqjmcb182

11 ай бұрын

Thanks!!

@KOrnhOliO1

11 ай бұрын

Yeah, who thought you could buy a Semi Truck, with a car transport trailer for $6K?!! Hard to lose much on that, I'd think.

@douglasharrington3003

10 ай бұрын

I graduated from bfa

@rodneymurphy3388

10 ай бұрын

Congratulations bro.........a single axle is a great tractor to pull you setup you can scale you loads and trailer without much weight restriction.........great Buy.......👍🏾

@F34R_

9 ай бұрын

Has no one looked and realized it has over a million miles on it. That’s not a steal that’s average pricing for a extremely high mileage semi especially a Volvo.

You can find front tires for around $300 each. And I'd definitely switch to duals on the drive axle. For traction and also if you have a flat or a blowout, you can limp it somewhere on one tire. With super singles, you're stuck wherever you are. Side of the interstate, on a curve, a city street, wherever. Chances are you can trade someone even up your super single wheels for their dual wheels. Some guys like them for the weight reduction. Best of luck truck driver!😉

@michaelsorrentino9279

11 ай бұрын

$300 hundred, where are you buying tires from, the back door??

@KSE828

10 ай бұрын

Duals are a LOT more expensive than super singles. If you’re not going to be out every day relying on this truck for work or whatever, the singles should be fine. I would caution against driving it in the winter with them, though. I can’t count the number of times I’ve gotten stuck. There’s also no way your getting virgin steers for $300 each, and if you do find them, that’s cheap enough that I’d be suspicious as hell.

@davidestrada7337

9 ай бұрын

@@KSE828yes you can get them even lower. u gotta know people we get them virgins for 245 NEW each we have a trucking company

@kevinhargro4001

9 ай бұрын

I totally agree with these guys. Safe travels.😁🙏

That was a great buy and you did real good for your first time driving a big rig. I agree with duals on the drive axle. Usually tire cupping problems are caused by loose steering parts, bad shocks or simply being badly out of balance to begin with, also make sure the wheel alignment is okay. Congrats and thumbs UP!! 👍

@ARuralVermonterQqjmcb182

11 ай бұрын

Thanks!

@quentonmillstid850

11 ай бұрын

4:06 "I've driven these before" not the first time. Please listen to his words.

First thing first check your king pins for play. Then front shocks. Those tires usually don't just cup or wear like that.

@gabeackermanackerman1084

11 ай бұрын

And wheel bearings as well.

I'm a mechanic at a fleet shop, we mostly run volvos and macks, although most of our stuff is a little newer. These trucks have been relatively trouble free, we do see a lot of issues with fuel systems getting clogged up and throwing low pressure codes, there is a banjo bolt on the fuel filter inlet and it can get pretty clogged up. The mileage is pretty high, and considering the lack of blowby and not many leaks, it has probably been refreshed. You should check king pins for play, grease all the points in the suspension. Those tires aren't worn normally, I would check wheel bearings or alignment. Only major failures we've seen air top end, mostly cracked heads and one that dropped a valve. Overall seems like a great buy, 6K is a steal for what you got.

@rubbersidedown7992

6 ай бұрын

Hey! 1 Q. Which brand actually offers relatively more reliable heavy engines?

@rubbersidedown7992

6 ай бұрын

Amongst Volvo/ scania/ man/mach .. .. ?

@Hdogdog7

6 ай бұрын

@@rubbersidedown7992 I'm american so we have different trucks over here, but we've had good luck with our volvo d13s and cummins x15s. I don't know if you have international brand trucks wherever you are but if so stay far away!

@rubbersidedown7992

6 ай бұрын

@@Hdogdog7 👍

With semis, you never want to cheap out on front tires. Don’t necessarily need the most expensive ones but you always want good condition tires. If one blows it’s obviously dangerous but it’ll completely destroy the front end of the truck. New hood, fender, and headlight minimum. Otherwise this thing is awesome. My dad had an 07 with 1.2 million miles on an isx, but a full sleeper truck. Might be worth heading to a truck salvage yard and seeing if there’s better seats to buy, maybe with better armrests or whatever else. I’m subbing for this because I really wish I had an excuse for a single axle semi and I’d specifically want a Volvo too.

@michaelsorrentino9279

11 ай бұрын

True stay away far away from Chinese imported tires, your life and those around you depend on them!

Great truck. Definitely get a professional dot inspection done by someone who you trust so they can look at the airbags and the brake Chambers. Keep cash on you when you do take for your first trip, the heavy towing companies charge a lot less for cash than they do credit or check❤

Just be careful semis dont like sitting for a long time sometimes brakes start sticking in the drums just be sure everything is good whenever you get back to driving and dont forget to keep up on maintenance

You look jacked,Working out? Nice rig! Let’s start hauling !!!!

@mylifethaidiy7045

11 ай бұрын

P90x

man I really love these videos. been on a binge for the past few months and these just keep getting better and better. keep up the good work 👍

Congratulations... another awesome find! Looks like there's a lot of potential for what you can do with it & that includes having a lot of fun. Enjoy!

Great buy, great video, Keep em coming, enjoy what you do in the videos buying, fixing, etc. Stay safe and take care.

Exciting purchase. Your hard work is paying off. Keep killing it!

Found your channel recently and this is the sickest thing so far. Got me tingling. Very much needed at the moment.

That's awesome! Looks like a good truck for a great price. Now go get your CDL so you can sponsor me 😂

@ARuralVermonterQqjmcb182

11 ай бұрын

Thanks! Give me 2 months haha

@danielkingery2894

11 ай бұрын

Whatever Waldo....we don't ever get any Cool Cornbinder vids anyway. 😛

Congrats! 🎉 Definitely looking forward to seeing your channel grow with this bad boy! 👍Keep up the great work!

This is my favorite KZread channel, it’s so authentic!! Always looking forward to the next video :)

Congrats looks like an awesome truck good find! Hope you get your cdl with no problem. Can't wait to see what you do with it.

We are in the BIG LEAGUES now. Congrats 💪

Very cool purchase! Nice job driving it home. I was wondering where you'd park this beast. Should come in handy for those multiple purchases/drop offs at the auction.

Man! That was a great buy!! Outstanding job!!

Now that's what I call a car trailer !!!!!! Well done !! I enjoyed watching you drive it home. I was smiling with you.😁

Excited for the video series! And that truck sounds great too!

Love the auction videoed! Keep up the good work !

Congratulations 👍🏻 nice semi, looking forward for more!

9.8 mpg! Better than I thought lol. Great stuff man! Keep it up!

Balls Baby, Balls !!!! Seeing those tires and then seeing the rain, Balls man for a maiden voyage. Awesome buy and cant wait to see whats next.

Woooowww what a steal! I can't believe you got all of that for 6k! Can't wait for the next vids and seeing what you do with the trailer! Congrats!

Love the sound of a diesel! My dad worked on trucks and inspects them

Congratulations and welcome to the big leagues

Congratulations on your purchase. That’s going to be cool videos once you get your C D L. good luck

Congrats on the buy. Nice Rig. 😊

Great video, can’t wait to see more content on the truck!

Exciting purchase. Your hard work is paying off. Keep killing it!. Exciting purchase. Your hard work is paying off. Keep killing it!.

New Fuel filter, new oil filter, check all brakes shoes/drums, slack adjusters, air canister, S-cams, bushings for your suspension, leaf springs (check for cracks), king pin on your steer axel (might be causing uneven tire wear), check your hub oil, see if hub cab is leaking, wheel seals. That’s a good start and get it all clean so you can see where the leaks are originating from. I’m not a mechanic just a fellow trucker.

Awesome job! As a trucker, I am impressed with your driving skills without having your CDL. You did a fantastic job shifting. What a deal on the truck, super cheap! Were you using the clutch to shift or no? Looked like no. You shift those by rpm and not so much by clutch. Well done if that’s the way you did it! I’m sure you probably know about the “clutch brake” as well, right? To get it into first gear, you have to put the clutch to the floor. I’m really impressed with how well you did with it. You must have had some stick time in a yard somewhere. Good luck, I’ll be watching!

@ARuralVermonterQqjmcb182

11 ай бұрын

Thank you! I was floating best I could and I have a messed around a bit in the yard before. Appreciate it!

@johnmcelroy2900

11 ай бұрын

Those 10 speed Eaton don't have syncros so u shift without clutch if u try 2 your gonna grind alot I used to drive alot 10 speeds

@bellowsjeep3999

11 ай бұрын

@@ARuralVermonterQqjmcb182 also, it’s a four hundred rpm span between shifts, for example, upshifting pull it out of gear at 1600, it goes in the next gear at 1200rpms. The opposite is true for down shifts. Good luck!

@TheSlagman0

11 ай бұрын

When you shift gears watch your rpms and take your time when shifting ,it's not a race ! Good luck

@Dingthedingbat

4 ай бұрын

Children killer, Steven Dewey, a child killer is a truck driver from Hartford Connecticut that moved to Vermont

WOW, sooooo happy for you. As the saying goes, you gotta spend money to make money. You will have no trouble getting your cdl. Best of luck. Look forward to you getting it ready for the road.

Good buy! It looks like so much fun. Great.

That's a steal of a deal for that that setup is worth at least 12grand!!💗 you basically bought the truck and got the trailer for free!!👍

WoW your in the big leagues now. That rig is neat.

Way cool rig! Good purchase.

This is so cool! I work up in Derby Vermont detailing cars at a place that sells cars and big trucks like this. Every now and then I clean big trucks like this. You're right about the seats. Most of them are awful.

@thomasallen6980

11 ай бұрын

Something about gas station burritto's that turns gas(farts) into a chemical that rots p-leather seats.

@nickwillard4471

11 ай бұрын

@@thomasallen6980 they seem to get really stiff. Almost feels like sitting on a church pew.

Excited for you man, thats a great looking rig for 6k! For the trailer tires and drive tires you might want to look into getting a grooving iron, those heavy tires can usually be re-grooved to get your moneys worth out of em.

Good luck with the CDL getting a class A is difficult but it seems like you already have the hang of it

Excited to see the series. Good find

Sweet buy! And I was pretty impressed with the driving!

Nice buy bro , you are killing it

congrats great buy, have fun with it!

That's a good deal man. I haven't had trouble from a Volvo engine when I drove truck. Work on progressive shifting. Shift at 1200-1300 in the low range and 1350-1450 in the high range. It should be smoother.

Your channel is growing fast,....I've been subbed for at least 2017 years...

That's a fantastic buy for sure! No blowby either that engine was very well taken care of or had an in frame. Most volvo engines will crack heads before the bottom end goes, know plenty of people that have well into the 1.6 million and only cracked a head. The slower you accelerate and the lower your rpm stay's on the highway the longer the engines going to last. You definitely need steer tires, they'll be $500 each minimum! Looking at how they're worn, you either have broken belts in the tires or your alignments out, soon as you get steers on it go for an alignment (Very in expensive and will save those pricy tires) and check over that front end thoroughly. Take my advise or don't up to you. I'm an owner op and was a truck mechanic for 5 years.

@ARuralVermonterQqjmcb182

11 ай бұрын

Thanks!

@RohanSanjith

5 ай бұрын

Truck engines don't rev to 7000rpm, they spend majority 1500 1600 rpms, it's about oil and air filter maintenance

Sweet deal nice buy. That motor will be more than enough for what youd be hauling. Its probably underpowered in dump truck/vocational applications. And yeah get duals in the back, also safer if a blowout occurs

@the_truck_farmer

11 ай бұрын

In a place that gets snow and ice the traction of duals is infinitely better

congrats man. keep on truckin!

Wow great deal on the combination! Congratulations

Damn imagine the money you could make with this getting 4 cars from Florida and bringing them to our rusty state lol make money and bring some non rusty cars to sell at the auction, the 3,000 miles round trip would be nothing to this beast too, my dad used to go to this auction and take me with him when I was a kid before he moved back to live in Florida so it’s awesome seeing your videos of the exact place lol, He’d always bring cars without titles (over 15 years old) and sometimes Japanese cars or muscle cars to sell that would usually be long extinct in the north

What a score! Congratulations!

Don’t cheap out with a semi on maintenance. Mr DOT loves people who cheap out on maintenance!

I've been a truck driver for 20 years, and you did very well on floating the gears. (Shifting without the clutch). The one thing you should work on is to learn how to double clutch. The DMV inspector for when you take the driving test will need to see that you know how to double clutch. Study hard and practice your VT state maneuvers. Good luck. Great buy on the rig and trailer.

Congratulations on the truck.

Loving the content keep it up!

Dude 6k for a semi AND trailer is a fuckin steal, grats man, gl learning!

Awesome new reg, this should really help grow your channel with much more efficiency. God bless

Awesome buy good luck

Man bro keep uploading plz I love the content

I love the new rig. And you stole it for 6 grand. Can't wait to see what you do with it. Keep the videos coming!

Thats a great grab for your first Rig and always remember to float those gears to save your clutch.

Awesome purchase, you are becoming a mini conglomerate.

What a damn good deal, dude!!!!

I think check brake ecu is common after dead battery too

Your shifting was impressive! Its like you’ve been driving rigs for a while already

Congrats. Your the man.

Congrats on your purchase

Great Hot Shot Truck for the Price!! I turned in my CDL about a year ago I am retired from driving and my 22 F150 suffices enough. Great Videos

wow that is huge for you and your channel!!

Damn I’m jealous. That’s a nice ride man.

Badass man, I love Volvo semis

Damn good shifting overall!

Deffo fit dual tyres on the drive axle , also fit some spares under the trailer , much cheaper to swap a blown-out tyre for your own spare than trying to buy on the road , those Volvo trucks are brilliant to drive , our company has 60 of them , all cabovers of course in the UK due to vehicle length regulations , great chanel mate , Waldo recomended you

Heck of a buy there for that price! After replacing the steer tires duals on the rear would definitely be a smart decision.. Two biggest buys right there. Possibly need new batteries as well?? Good luck with CDL school I'm considering going to get mine as well.

Watching the drive home I could tell everybody wanted to pull out infront of you 😂

what a sweet truck man

Looks like you got a decent looking tractor rig and trailer

Nice! Now you can get all your cars you buy at an auction home in one trip! Good luck getting the CDL!

Love these videos

Love the videos.

You are the goat for buying a Semi Truck! 🛻

You should see if you can find a semi truck junk yard to score parts like a new/used seat and dual drive wheels.

Tip in shifting that you will learn in CDL school anyway, unloaded you can start out in 4th or even 5th, and you don’t need to rev up to get moving, just let the clutch out then feed it fuel. Even loaded I usually started out in 3rd, 2nd only going up hill. I don’t know if you’ve been floating gears while downshifting yet, that takes practice.

Q-Man! What a fantastic buy. I'd be too scared to drive something that large, lol!

Did good on the deal bud. Soon as you get new streer tires definitely get a alignment job. Those have wear showing alignment/shock wear. Super singles are beter for fuel economy but when you blow one you are done. This will be a great addition. Think ole Joe for the CDL school......

hey, great job on the driving for being a first-time driver. I will say that for the amount of power and gears that you have, skipping gears is going to be tougher than it would be in a 13 or 18 speed. One thing to improve would be to slow down and watch your engine rpms closely (lining them up with the transmission for a smooth shift) to avoid grinding gears, once you have those figured out you can shift gears blindfolded.

A smart Vermonter would take that thing down to Florida and fill that trailer with 4 rust free cars. Drive it back to VT and sell them. Looking forward to seeing what you do with this thing.

very good purchase, success for you

keep em coming

This is going to be fun you can do so much with a semi

Great buy 🎉

Don't use spray cans, Use PPG ALK 200 Alkalid Enamel. This paint is very good for what you want to do on the trailer. For less than $100.00 you get a gallon sprayable, you don't reduce. I sell this paint every week.

I drove a single-axel Volvo for a few years around the Boston area. Those things turn on a dime. A few years ago I was a salesman at L&B Freightliner and we usually had a couple of used seats around. To me, the seat is the most essential part of the truck lol

Good Job 👍

Dude if thats your first time driving a 10 speed rig you did super good ! When i got my cdl there were multiple kids that had been there for over a yesr snd couldnt go from 1st to 2nd