Thank you for showing us!! I'm planning to buy one as well in the future!! Looking forward to see your future videos..😂

@ChristopherQuest

Ай бұрын

Hello, the ease and weight of the air floor is great. I can wheel this in where no paved boat ramps are available too. Thanks for watching!

That’s cool. Awesome

Definitely a nice looking dingy. Looking forward to part 2 and to seeing your next adventure. 🙂👍

@ChristopherQuest

5 ай бұрын

Hello Harvey, I am working on the next video right now, hope to have it done soon (a couple days). Hope it is interesting anyway. Thanks for the comment and for watching! wait till you see how I use this boat, should be fun!

Very nice. Ready for part 2. Get busy!

@ChristopherQuest

5 ай бұрын

Hello! My number one subscriber! The next video is coming soon sir. This boat is gonna be fun. Thanks for watching!

I really like the side rails where you can stow and tie down your gear. Very nice review.

@ChristopherQuest

5 ай бұрын

Hello, Thanks for the nice comment. The next video will show some of the options I will be adding. Thanks for watching!

That new rig is so cool! Looking forward to your next adventures in it. My wife and I watched this video last night on the big screen, she is looking forward as well.

@ChristopherQuest

5 ай бұрын

Hello Jay, The next video will show the upgrades and plan for use. You should think about heading up this season for a few days or a week on the National Seashore, dispersed camping at it's best. Bring the Witch and come on up. Thanks for watching!

@JungleJayAdventures

5 ай бұрын

That definitely is something to think about@@ChristopherQuest. Ill have to start planning!

Excellent video. But, most likely that Seamax dinghy wheels and trim tabs mount bases might not fit on this transom side by side. Instead of Seamax, we can provide you with Saturn dinghy wheels set. Saturn wheels can be installed on a same mount base as trim tabs, as they are backward replaceable. That way you can remove wheels once in a water, and install trim tabs instead, and vice versa. Please contact us if you have any questions or issues.

@ChristopherQuest

5 ай бұрын

Hello and cool that you watched the video. My next video will show how I mounted the four brackets - You are right, it is tight! I actually cut a little clearance in the tabs for full motor motion clearance. I did get it to work. Thanks for watching and stay tuned!

That’s a nice boat. I have the Bris , I like it but it’s all most too heavy for me by myself. Good luck.

@ChristopherQuest

5 ай бұрын

Hi Jeff, My next video will show how I added two handles up front so as to use two arms when moving this boat around. I have a Bris 14.1 with a alm floor and it is too heavey to lug up on the beach for sure. I will deonstrate moving the boat on my next video. Thanks for watching!

Cool video I just ordered my 16 ft Saturn heavy duty inflatable ding paid 2000 grand for it with the aluminum floor so I hope for that much I better get vet woth no issues tho and will see if this company is want they say it is but so far your looks cool and thick they say it’s heat welded all around for what I paid should be strong first time buying from them hope it turn out great cool video

@ChristopherQuest

3 ай бұрын

Hi Donald, Wow a 16' Saturn. I hope you do a couple videos on it, would love to see it. Yes, I like that all the air chambers are heat welded. Next adventure starts tomorrow. Be sure and see the videos of the boat on the beach camping. Thanks for the comment and for watching!

@donaldmartin4620

3 ай бұрын

@@ChristopherQuest ok thanks will see as far as you know they are well made amd won’t come apart on me in the ocean and can handle the ocean that is my question since you already have a Saturn I’m wondering are they as good and strong woth double layer fabrics like it say I’m a little nervous tho but thanks for the message back appreciated it

Thank you for informative video, I'm planning to get this boat this spring, have almost the same motor, 9.8 by tohatsu 4 strock. Just wondering if 9.8/9.9 is enough for this boat? Have you done speedtest without gear alone and if you did what speeds did you get on it with your 9.9 motor? Thanks!

@ChristopherQuest

5 ай бұрын

Hello! To be honest, I am not sure yet about this boat performance, just the one time out. I had a heck of a time, even with trim tabs getting her up on plane with the 9.9. I plan to change my prop and adjust trim tabs to see if that helps. I was planing to do some speed tests - but felt I needed to make some changes to give it a fair shake. I could get my 14.1 Bris on plane and faster with the 9.9 (see older videos) and smart tabs. Not sure yet on the Saturn. Thanks for asking, and thanks for watching!

@edyshok

5 ай бұрын

Thank you for your reply, will wait for your speed test...@@ChristopherQuest

awesome video! looks like a great boat. how are you liking it so far on the water? time to watch more of your videos!

@ChristopherQuest

3 ай бұрын

Hello Dave, I do like the fact it is lightweight but there is something to be said for the depth or the distance from the top of the tubes to the floor. I do think I prefer a larger Dia. Tube. I think they are available on larger boats, but then there is the weight thing... oh well, nothing is perfect. It is a great boat and about to start a couple of new adventures. Thanks for watching!

@ia6980

3 ай бұрын

​@ChristopherQuest what do you consider light weight? Its 125lb without floor which is another 32lb, how is it a light boat?

Great video series. What air pump are you using in this video? Thanks.

@ChristopherQuest

8 күн бұрын

Hello, I am using a Seamax Max Support 20psi. It is a older model, but just keeps running! I am sure Seamax has newer models out there. Thanks for the comment and thanks for watching!

@KarlBAndersen

8 күн бұрын

@@ChristopherQuest I appreciate the response. I'm getting a 365. I can't wait.

@KarlBAndersen

8 күн бұрын

@@ChristopherQuest I'm glad you replied! I just got a brand new one on Ebay without the box for $34

Thanks for the videos, I'm considering buying this boat. Would you think 2 adults and two kids could fit comfortably in this boat?

@ChristopherQuest

4 ай бұрын

Hello, There is a youtube channel called Happy Hartshornes - he has the same boat and a couple children he takes out on this boat. Personally, I would go for a Saturn or Bris (best values I think) with the larger side tubes - like 18" just feels more substantial and able to handle the weight and waves. Just my thought, I am no expert. Thanks for watching!

@codyakfishing8856

4 ай бұрын

I'll look him up, ty

2.3 inside widths, thats pretty narrow, 3 ft is ideal

@ChristopherQuest

3 ай бұрын

Hello again! Yes, more width would be nice and larger diameter tubes for sure. My Bris 14' is much more substantial. Thanks again for watching!

WOWW! That's nice. I owned the SATURN SD 365 with ALUMINUM FLOOR, come check it out :)

@ChristopherQuest

4 ай бұрын

Just watched a couple of your videos, very nice boat, great accessories. I subscribed. Be sure and see the camping video too. More to come. Thanks for watching!

@pandaoverboard

4 ай бұрын

@ChristopherQuest thank you Christopher. I enjoy your videos as well. For sure!! Happy Easter

What is the price

@ChristopherQuest

17 сағат бұрын

Hello Robert - I just looked at Boatstogo.com and they are now $1,399. Seems at bit high to me, may want to wait for a sale. Thanks for watching!

@RobertEllefson

16 сағат бұрын

@@ChristopherQuest ok thank you

Way to heavy

@ChristopherQuest

3 ай бұрын

Hello, I must admit it is close. On the next video I attach two handles to the front of the boat which makes a huge difference when rolling it around. The video after that I roll it up on a beach and it worked pretty good. Thanks for watching!

@donaldmartin4620

3 ай бұрын

Just put the trans one wheels on it and you can lift the drone heavy or not we all need exercise in life most whant to be lazy and not exercise I load mine blow it up lift the front amd have the wheels on the back and push it to the launch in the ocean with no problem to each there own tho in like fe but nice