Please let me know what you'd like to see me work on next... Don't forget to check out my online store :) www.consolefix.shop

@TravisStamper

20 күн бұрын

Sarah...........lmao

@TheCod3r

20 күн бұрын

@@TravisStamper haha you tool 😂

@SLAPPY4241

18 күн бұрын

@@TheCod3r hey bro can I talk to you personally got a question/ need some guidance on repair a hdd on a Xbox s even willing to pay you for your help.. how can I get in personal contact with you.. thanks for your time bro

tips from a retroconsole expert: all screws were originals. so don't worry about that. the power supply is simple to repair. those are notorius to go bad due to 2 small capacitors on the high side voltage. specifically C3 and C20. if you change those caps you have a new working PSU, trust me. and the PSU is original as well.

@TheCod3r

20 күн бұрын

Thanks for the info buddy. I'll take a look at the psu when I work on part two tonight. I still have it sat on my bench lol. Thanks for the tips too. As you can see I'm new to this so every tip will help me get better 😉

@RVNR2022

20 күн бұрын

@@TheCod3r don't worry, i'm here to help and cover your back in your retroconsole journey

@TheCod3r

20 күн бұрын

@@RVNR2022 thanks buddy

Good to see you working on the PS2 any older generation console repair is great to see :)

And apparently not many people know this but just as the ps2 powers on, the tower block animation effect that you see, depending on how many tower blocks there are, represents the amount of games played on the ps2, and the height of a particular tower represents that games progress.

@kulilin3104

14 күн бұрын

I can't remember if it only does this with a memory card in. Or if it does it all the time. Man, hard to believe it's been over 23 years since this beast of a console came out!

@tyronenelson9124

14 күн бұрын

@@kulilin3104 You might be correct as this would be the main way that the console would remember that type of data.

You don't have to replace the battery. When you go to adjust the date, press X then go to Seconds, press up and down, then X again. The seconds will start moving, you can then set proper time and as long as the console is connected to the mains it will keep the settings even with dead battery. These aren't economically viable to fix now, but their prices are slowly increasing. I sold a PS2 recently with two joysticks for 65€ (considering I paid 15€ for the whole package) which was in similar condition to the second one you tested. Might want to keep them rather than scrap for parts, who knows how much they'll be worth in the future.

@RobertStevenson-uy9sj

12 күн бұрын

Who wants to do that every boot up though? The battery only takes like 10 mins to get to and replace while u can clean everythingout there. I also put new thermal pads in to since mine was blowing cold air only(not a good sign)

FYI, you need to check both parts of the DVD drive as it's a DVD and CD drive combined, usually after fixing these for years, the CD part tends to fail. You could try the trim pots on the laser itself, but, having replaced many its usually a laser swap. Was involved in modding these.

The PS2 is the best console one of my favorites consoles ever made by Sony 😍😍

Great video phil

I'm always amazed watching these repair videos . Thx 🎉

@TheCod3r

20 күн бұрын

Thanks mate, much appreciated

It`s always nice to see old consoles. I`d polish the cases, install network adaptor + ssd, maybe some nice chip if they are still available (or just go for the freeboot), and you can get some nice money out of them.

Hello Phil! I think it's great that you take a look at old treasures like this. Thanks for your videos and good luck in everything you do!

I was 19 when I got mine, May 2001. Twisted Metal: Black and Madden 2001 Seemed like the pinnacle of gaming. Still have it complete in box.

Love to see the retro repairs phill, hope to see more soon

When replacing the laser make sure to desolder the anti static solder blob before install or it wont work.

Loving the new videos with random stuff. A lot of people like working on electronics (such as myself) but don't work on consoles all the time or ever really. This stuff gives the obballs like me something else beside your console stuff to watch :) looking forward to that video of the TV you were drying out!

Great video Phil, nice to see you getting to play with the retro consoles. Looking forward to pt2 👍

I love seeing the retro consoles yes not a big money maker but still cool video non the less

@buggerlugz6753

20 күн бұрын

not a big money maker........YET.

I have fix 2 of them jus last week, my kind of video a little retro stuff 😁😁😁

Don't forget to test the disc drive with both cd rom and dvd rom games, ps2 can read one and not the other, my ps2 reads dvd rom but not cd rom

21:39 if the blue dots on screen are not spinning but stuck like in the ps2 in that frame the CMOS battery is dead

Logo not spinning - just set clock after battery replacement. Disc drive try to start only - laser is dead or need calibrating or ribbon is broken or even anything else linked to laser not working. Thats just mean Disc drive don't see CD/DVD. It only speed up if see something.

Great to see an older repair. I enjoy those too. Love how the battery had a ps logo on it! Been there since the beginning of time😅

I have a ps2 that have the network adaptor paired with 120gb ide hard drive and freemcboot. Not once i ever changed the cmos battery and it went flat. Disk drive still works

The one that doesn't spin the disc has a bad laser. You can get 3rd party 400C lasers off of ebay etc for pretty cheap, but you might need to update the disc drive firmware to make it work better if it originally had a different type of laser. As you have a freemcboot card, you should be able to boot stuff off of a USB stick i believe, so it would be as easy as swapping the laser, downloading a program for flashing the firmware, dropping it onto a USB stick and running it on the PS2

Ps2 is just gold to fix! ❤🙌🏻🙌🏻🙌🏻

Nice to see someone given these lovely old consoles a new life.

The ps2 is such an amazing system. 007 nightfire and matrix were some of my go to games!

The one system where it attempts to spin up but then stops, try cleaning the laser and adjusting the variable resistor. I usually record the resistance from the factory and then gradually reduce the resistance by 10% at a time until it starts to read again. I’ve been repairing game consoles for over 10 years. Sega Saturn, Dreamcast, ps1, ps2 and so on generally do the same thing if the laser is failing.

I love the retro stuff

Awesome Cod3r! Some of those are old and crusty, like me.

I was hoping you'd check the expansion bays... I used to hide some 'stuff' in those

If you don't have a spinning circle at the main menu it just means the time is not set. Even with a dead battery you can have the time and date working as long as you don't disconnect the console from the mains.

Hi Phil love watching your video just wondering as you have 6 of them you should do custom paint on one of them be good content

A saga mega drive would be a cool fix for a vintage console

Don't forget you can always play an audio CD in it

hi, if it can be of help to you, I have repaired about ten of them specifically to be able to repair the power supply you have to check that the zener diodes are not shorted, all of them but specifically it starts with ZD1 or ZD3 they are located near the filter capacitor and then replace the 33uF 35V capacitor C3 which usually has an ESR. You'll see that you can repair it with little effort 😉 

For 24 years old they are beautiful. I was 18 or 19 when they came out. If I remember correctly some one back in 2000 put a bunch of these together and made a super computer.

@TheCod3r

20 күн бұрын

They are indeed. I love my PS2 Slim, it really brings back memories when I fire it up. The super computer thing sounds cool, I might have to look that up lol

@Portuguese-linguica

20 күн бұрын

@@TheCod3r PlayStation 2, the Air Force used 1,760 Sony PlayStation 3 consoles. They called it the "Condor Cluster," and it was the Department of Defense's fastest computer. They did something similar with the PS2.

Phil, You do such a great job with anything you try to repair. You success rate has got to be at least 90%. I would love to see more live videos. Are you still on Twitch?

@TheCod3r

20 күн бұрын

Thanks buddy. I've taken a break from live streams for now, but I will get back to them in the next month or so. I'm just getting my life in order first and trying to sort my new workshop too

Phat PS2 with the HDD adapter make great retro consoles.

You know what... It would be cool if you did a video on what different components are on typical home appliance circuitboards and how to test them. Most people will be working on junk that breaks around the house rather than consoles all the time.

Dead CMOS battery does NOT make a difference whether it loads the disc or not. I have 4 phat and 5 slims and all of the batteries are dead (you can tell by the spinning icon on the load screen) and they all load discs fine

hello so im searching for ps4 pro (old motherboard) parts and case, i have only the motherboard and the metal plates with the heatsinck

Hey phil loved this ,but it hurts my feelings. about 3 yrs ago I threw away about 15 to 20 of thoses ps2s.

@TheCod3r I have nintendo switch v1 that doesnt want to stay in sleep mode. when i turn on auto sleep, it keeps sleeping and waking up. did you have this similar issue? i know i have defective wifi ic because it cannot detect wifi and bluetooth. but it doesnt matter since im going to mod it anyway. i already search the internet but i cant seem to find the fix. i will wait for your reply, thanks.

I’ve been tinkering with my ps2 system. Changed the battery and a new thermal pad, and a new laser cause the old laser wasn’t reading the cd purple back disc.

I bet the wires for the disc drive were not fully in. The trick is to reconnect them before you actually put the metal plate on

you have to set the time and then the logo will spin after changing the battery

The disc drive not working because of the motherboard battery doesn't make any sense to me. Generally the battery just keeps the real time clock, if you have a good disc drive it should work regardless of the battery. All your saves would say January 1, 2000 though :p

psu's have two caps that go bad and cause issues with no power, just do a fully cap kit on them and that will fix the psu

Good joob thanks

I will never know why they still do not build access points to the battery, even on motherboards now they hide them behind the heatsinks.

It will still play games if the CMOS battery goes bad. I have been working on PS2's since they released.. never had that issue.

Oh a playstation 2 slim 💯🆒

After replacing the cmos battery the animation in the background didn't move until I changed the date and time.

How much would you charge to repair a 3ds with no power and possible water damage and a Nintendo ds with a faulty game card slot

@TheCod3r

20 күн бұрын

I wouldn't want to work on a 3DS to be honest mate. I don't have any parts for them and they're a pain to work on

I still have my ps2 from 1day before launch and kept it in immaculate condition

@TheCod3r

20 күн бұрын

Yeah it really is an amazing system. Probably Sony's last decent console IMO lol

@cfq.tufanuf7601

20 күн бұрын

@@TheCod3r yup.. I also chipped it with a neo2 chip i believe. It was a long time ago :) But its still working great!

@TheCod3r

20 күн бұрын

@cfq.tufanuf7601 nice mate. I have my slim modded too but I didn't do it so I don't know what it has done to it. It has am SD card mod and Free McBoot but I'm not sure what else it has lol

@TheCod3r Hi Phil, how to I get a Switch repaired. I have logged a couple of repair requests but didn’t get a reply. I want to get the switch repaired for my son as he recently lost his best friend and this would help to lift his spirits! Cheers.

With the PS2 that warranty sticker always looks like they've been torn, they do not hold up well... So do not go by that.

Pls how can I fix my display porlm

PS2 rusted all around, broken video connector, still works fine. Ps5, 1 water drop and dies instantly, needs cpu reball.

A console where when the CMOS battery dies you don't lose access to your games.

I’d like to see the original Xbox being repaired

@TheCod3r

20 күн бұрын

I'll see what I can do bud. I have a couple in the loft so I need to get a controller and cables for them first

@phillipgunner6902

20 күн бұрын

@@TheCod3r I have the controller for it but the console I’ve got doesn’t work anymore. You’re welcome to.

You'll probably make more money selling the parts, things like the feet sell for a surprising amount

What, no FIFA discs laying around?

How about you go to ps3 diffrent models for the next video.

If I didn't live on the other side of the world I would buy a ps2 from you but the postage wouldn't make it worth while

Shouldn't you have a silver plaque from KZread now?

Sadly all PS2s will eventually succumb to dead CPU as the substrate fails!

New Lazer from Alliexpress 7.00.