The official end-game custom keyboard

@raeyen0102

2 жыл бұрын

yo wassup keo didnt expect to see you here

@srinjandas4287

2 жыл бұрын

U in the custom kb world now

@yogendranarainjha4740

2 жыл бұрын

Hey keo I still cant find a monitor for $5 😆😆😅

@alzww

2 жыл бұрын

The legendary Keo Tsang is here

@shreejaykrishnakumar5172

2 жыл бұрын

Yo keo

that ad was the best

@orangeboiii.

2 жыл бұрын

MANSCAPED

@Manilasters

2 жыл бұрын

here before this blows up

@fudgeen7690

2 жыл бұрын

MANSCAPED

@cheatlmao

2 жыл бұрын

fr

@ireadysucks3026

2 жыл бұрын

LANDSCAPED

Technically, “custom” keyboards are always pre-made

@ezf__

2 жыл бұрын

Bruh

@myrtleroche116

2 жыл бұрын

Fax

@dihydrogenmonoxide6748

2 жыл бұрын

Nooo. When those "custom" built users find out about this, they're gonna spontaneously explode

@thexplode7

2 жыл бұрын

No. Pre made are setup in factory. Custom are assemble by our selves hence custom.

@xuanbachpham9752

2 жыл бұрын

Yep, but you can choose the plate, case, stab, switch, keycaps,...

I usually skip the parts where KZreadrs talk about their sponsorships but with squashy boy they're so creative lmao it's worth every second.

@charstringetje

2 жыл бұрын

Danehearth does high effort ads too.

@NuuweiLol

2 жыл бұрын

V54w

@fusion921

2 жыл бұрын

MANSCAPED

@BigVikingDuck

2 жыл бұрын

ikr

@jamesleuthauser9336

2 жыл бұрын

Who took my mans back in time and showed him old Powerthirst videos before this ad?

A lot of people have been saying this, but I’ll say it too; for the bigger parts, like the case and plate, FDM 3D printing works very well. However, for smaller parts, resin 3D printing is the way to go, since you can get so much more detail. However, your effort in making this keyboard (especially modeling the parts) is commendable; good job!

@gcolombelli

3 ай бұрын

You can even get some pretty decent results with an old printer and basic, cheap resin. I just built a corne with kailh choc v1 switches and was having a hard time finding keycaps that I really liked. The ones I loved the most were 3D printed and constantly out of stock, with no models to be found anywhere, then I ended up designing keycaps myself. For those switches, it's actually pretty simple to design low profile keycaps. The hardest part is sanding for a smoother finish and hand painting the legends, should you decide to have legends.

literally every keyboard on his channel sounds decent no matter how bad

@SquashyBoy

2 жыл бұрын

its a curse

@emillic7976

2 жыл бұрын

nah i cant let this spacebar slide this time

@nasi_gorengg

2 жыл бұрын

no cap

@itachi_the_memer3959

2 жыл бұрын

faxxxx

@exray805

2 жыл бұрын

@@nasi_gorengg backspace kekw

me: buys keyboard and mods it and still sounds bad squashy: literally prints a 3d keyboard and tapes stabilizer with tape and sounds good

@alexw263

2 жыл бұрын

same bro

@coconutlover

2 жыл бұрын

i will ur pain

@charstringetje

2 жыл бұрын

Wait. You didn't take your stabs? That's the only thing I did in my build. I didn't lube the Oreo switches, but I did tape the stabs and used dielectric grease on the to reduce rattle.

I swear squashy's sponsored ads are so entertaining to watch I can never skip them, he always finds a way to make it funny

@alexw263

2 жыл бұрын

true

@mirai5268

2 жыл бұрын

Recently finishes Steins;gate and even the name Kurisu makes me want to cry bro

@makisekurisu2824

2 жыл бұрын

@@mirai5268 I feel you T-T

@ahmeds9395

2 жыл бұрын

@@mirai5268 well u gotta watch Steins gate 0 and then the movie now 👀👀

@mirai5268

2 жыл бұрын

@@ahmeds9395 I did bro, it was really amazing but depressing aswell

i’m actually interested to hear the sound if the stabs weren’t 3d printed in sandpaper

i love the fact that all his videos are goofy, its just so funny to watch, absolutely love the work man HEAPS of love from bangladesh to you man!

@SquashyBoy

2 жыл бұрын

With the switch thing, you may want to look at nozzle sizes, it should be possible on a printer such as yours, just with maybe a 0.25mm nozzle instead of the standard 0.4!

@charstringetje

2 жыл бұрын

They will probably end up very scratchy. So you should use brown filament and call them tactile.

@faroukalkhateeb

2 жыл бұрын

They won’t work because there are no metal contacts

Thank you for pressing the keys the way you did. I really appreciate the sounds and the consideration you took for us to listen to every key.

Please do it again, but with resin 3D printers! :D

This is the content I wish to make in the future. Absolutely love the comedy, even in the sponsored segments.

I appreciate the project! you could make this a series where you come back to it and fully flesh out a different major component of the keyboard. I think it would be well received. Great work!

Love the ad, the personality and the fact you shared the mistakes. 👍

I like how it actually sounds pretty good

I have to say, that manscaped ad is probably the best ad I have ever seen.

Your ad for manscape made me subscribe. Also the project.

Finally he did it thank you sooooooo much!

The only thing that destroyed this build is the stabs, you could probably get away using standard wires instead and it’ll be amazing.

The part of your videos with the sponsors are so good, I don’t skip them.

The modifiers are pretty sick actually

squashy boy video instantly makes my week better

Squashy killing it with this great content

@SquashyBoy

2 жыл бұрын

grind dont stop!

The fact that squashy boy consistently makes me enjoy sponsor ads is amazing

I just subbed your videos are so good! keep up the good work mate!

it sounds so good

this guy 3d printed a keyboard with a plate that is split in half and it sounds better than my keyboard.

I'm actually working on a fully 3d printed keyboard right now, I've designed switches that fit in the Gateron optical boards so there's no need to solder. I'll print it when I finish because I have and FDM printer and a resin printer. Might make a video on it when it's done.

@Senya_3358

2 жыл бұрын

When

It actually sounds really good!

why does this actually soud good Great video btw

Apart from doing it for the fun, I wouldn't recommend printing keycaps. I tried once for a self designed macro keyboard and got really rough finger tips after a few days. While my main keyboard is indeed 3D printed and hand-wired, I use a set of decent PBT caps. It just feels better and makes typing for enjoyable.

@SquashyBoy

2 жыл бұрын

i agree on this

@LordHonkInc

2 жыл бұрын

There's two alternatives: Print non-dished keycaps (weird) or spend the time sanding the dishes (time-intensive). If you don't like either of those options, that's totally fine, preference in keycaps can make or break one's experience, but I'm daily-driving printed PLA(=Plastic) keycaps and haven't had any issues with the two options I suggested. Again, not knocking your experience, I wouldn't use untreated keycaps like in the video for an extended period either.

@twinklingwater

2 жыл бұрын

@@LordHonkIncAfter I got my first set of PBT caps, I really liked the texture and weight. That's why I got a few more of those. Printing caps allows for "weird" or mere unusual profiles. I experimented with really high caps for hard to reach keys. So both attempts have their advantages. I also understand that meticilously sanding a bunch of caps is an achievement. Maybe I will give it another try some day. My keeb that has Kailh low profile switches could really use better caps.

The effort this man put into his sponsored ads is just as much as those printed keyboard

Omg that sounds so good when tipping

Yooooo that's a lot of effort to do man. Great job!

When keybored enthusiasts find out the parts of their custom keybored is pre-built: 🤜💥⌨️

@emillic7976

2 жыл бұрын

keyboard enthusiasts fr making their own factory just so they can make the perfect switch

@SeaSerpentLevi

2 жыл бұрын

@@emillic7976 i can definately see that

@cumjesus

2 жыл бұрын

super idol 的笑容都没你的甜

@ReachByteBurst

2 жыл бұрын

@@nizarfahimi whad

@joseantoniolopez5053

2 жыл бұрын

Why is your pfp blank 😳

4:26 "I haven't slept for, like, 5 days" me who hasn't slept since 2016: *_weak._*

I really like the way it looks hand written, might do something similar to a blank keycap set

3:04 ah yes my favorite movie

There are already 3D printable keyboards, most notably SiCK-68, but that's just a 3D printed case+plate (they are 1 part) the switches, stabs, keycaps are all normal.

Everyone: trying to make their keyboards sound THOCK squashy: first I need to MAKE the keyboard

i always love ur sponsor skits!

The keyboard turned out really good nice job

ok why does it still sound so nice

@SquashyBoy

2 жыл бұрын

you need to get your ears checked my guy

@CanIHaveSumWaffles

2 жыл бұрын

Lmao

Squashy: Lemme 3d print a keyboard Every single soul ever: No Squashy: Ok so ima build a 3d printed keyboard *squashy mentality*

holy shit why do I like the sound test so much keycaps are sick btw

I was gonna make a video about making a custom 3D printed keyboard but now I know I can never beat this I don't think I'll bother. Awesome video. :P

2:29😁👍

"Being a farmer, its very important to trim your bushes and the grass." Top 10 famous last words

That is actually insane for 3D printed

sounds pretty good ngl

Squashy I don't know if you'll ever read this, but you're the only keyboard guy on youtube who is not making me cringe. Love your videos, love your humour, love your ideas!

@SquashyBoy

2 жыл бұрын

and i love you too!

@HouraisanShijuunana

2 жыл бұрын

@@SquashyBoy we all do

downloading a keyboard, pinnacle of engenuity.

ur comedy levels are off the charts bro love ur vids. keep up the great work

@SquashyBoy

2 жыл бұрын

thanks man! feedback like these really help grow the channel

the only youtube sponser ad that i enjoyed and watch it and not skipped :p

The space bar on the 3D printed mechanical keyboard sounds very good to be honest compare to the not 3D printed one

You Know your a bigwig when you get sponsored by Manscaped.

This was funny af lmao that spacebar lived up to you channel name

It actually Sounds pretty good

Can you mod a mouse to have mechanical keyboard switches?

@hugo671

2 жыл бұрын

You possibly can

When it sounds better than your own custom keyboard.😔

Love your videos

Taking custom to a whole different level

Try again with a resin printer, it’s way better for small parts.

First lol jk

@filipsjankovskis3895

2 жыл бұрын

2nd lol jk

my favourite clicky switch, gateron yellows!

this is so cool!

That’s Soo cool, wish I could have one

As soon as I heard you start talking about bushes, I knew it was gonna be a manscaped ad lol

bro besides the scratchiness why is this so damn good

Wow the stabs are so good

you can actually print decent switches, they're called void switches and are fully magnetic. you can even use them with hall effect sensors, to make analogic keys

such a great video perfection!

Wait wtf that space bar's sound is so cool

excelent job! And you are funny. very entertaining!

Insane!

wow! That’s so cool:)

thatis so good goodjob

okay, all jokes aside, i think the pla case, plate, and keycap combo sounds really nice and muted. it would be interesting to actually give it a proper try with normal tuned durock stabs. great video!

the font of the gmk handwritten is really nice i would get them

I never thought a sponsor could be so good🤣😂

3d printed custom keyboard Random sponsor: M A N S C A P E D

Your videos are so scuff i like it.

love your videos

Sheeesh best content as always 😊

(6:14) 'GMK Handwritten' instead of 'GMK Hennessey' 🤣🤣🤣🤣🤣 This reminds me of when I imagined GMK keycap sets with colourways based on picture books!

Ur vids and humour make my day ty

@SquashyBoy

2 жыл бұрын

ty too :)

wow this sounds pretty surprising ngl i cant believe it actually worked

yo why does this sound so good

Yo squashy you always make my day

Honestly, at most videos when a sponsored ad starts I would just skip it, but in Squashy's videos the ads are soo entertaining I just don't want to skip.

the stabs dont rattle they're just scratchy how

Tbh Sounds pretty good campared to prebuilt one

I love it when he he shows the segment for the sponsor

the fact it still sounds nice

“MANSCAPE!!” oh man the ad i didnt skip 😂

This brings a whole new meaning to CUSTOM keyboard

Now that's actually custom. I have a couple other DIY hobbies and compared to that keyboard building seems incredibly non DIY and just buy-swap no actual making. This is actually good and even sounded nice! I think the usual foam, gaskets, switches and keycaos are fundamental enough to be bought. But even pcb design isn't too hard and if someone creates a good open source project I'm sure we will start seeing some insane features being built on top of it.

damn you really outdone it this time squashy