Change Hyundai i10 engine oil, oil filter and air filter change. Spark plug check and Caliper pin greasing.
Жүктеу.....
Пікірлер: 62
@Soulenergy315 жыл бұрын
God bless u bro! Thanks for such an informative video
@sandysutb5 жыл бұрын
Very well explained and informative video. Thanks
@moguaii4 жыл бұрын
Thanks from Europe
@ingalway9 ай бұрын
Excellent video. Thank you.
@inaciocfernandesfernandes78905 жыл бұрын
Informative video nicely explained thanks for the video
@prince_kingdomm5 жыл бұрын
Please make video on Gearbox oil change for i10
@ganamaran5 жыл бұрын
Nice job, good motivation like chrisfix, please add spec of the consumables. Thanks
@yogeshjaiswal41116 жыл бұрын
Very well explained process from an expert .
@diyguy7378
6 жыл бұрын
Mr jojo 007 , Thanks for appreciating my work....
@briananderson63165 жыл бұрын
Thanks for your reply 👍
@GauravSingh-bs8en4 жыл бұрын
Nice one parformas Yaar
@user-jy1gi3ui2r2 жыл бұрын
جزاك الله خيرا وبارك الله فيك
@briananderson63165 жыл бұрын
Nice video good work 👍🇬🇧
@diyguy7378
5 жыл бұрын
Thanks Brian Anderson
@Lebethu3 ай бұрын
Thank you
@honorplay46313 жыл бұрын
Good job bro
@sameer94464 жыл бұрын
Very good vedio bro
@ayushmanmukherjee75565 жыл бұрын
Great video! Very detailed and informative.. keep up the good work! And I had a question! Hyundai recommends 20w40 or 20w50 mineral oil from Servo in Santro Xing (2005) So my question is should I go with 5w30 synthetic or just stick to the manufacturer's recommendation?
@diyguy7378
5 жыл бұрын
Please follow what is written in owner's manual. Regarding oil grade, it remains the same whether its synthetic or mineral oil.
@shivakumar-ld4tn5 жыл бұрын
Namaste, What is the NGK sparkplug no,. For 1.2 kappa engine.
@tnamen13075 жыл бұрын
Please show how to check resistance on spark plug HT cable wire hyundai i20???
@adrianbadea11793 жыл бұрын
How to change the air filter for clima? 🤔🙄
@RakeshKumar-sx4dp3 жыл бұрын
Make service video of Santro Xing
@briananderson63165 жыл бұрын
Can you tell me which Spark Plug Hyundai recommend for the 2010 i10 with the 1.1 engine please.
@diyguy7378
5 жыл бұрын
You can use Bosch or NGK
@economics19985 жыл бұрын
very nice video. where you got Hyundai genuine spares.
@PlayJewel
5 жыл бұрын
economics1998 there are many shops dedicated to selling genuine hyundai parts. Or u can buy online from websites like boodmo.com
@economics1998
5 жыл бұрын
@@PlayJewel Thank you
@jaywest74795 жыл бұрын
Is it always the good to use the old oil on the seal
@diyguy7378
5 жыл бұрын
Yes, no issue in that. I don't want to use my hands in new oil 😀
@bankniftytommorow5 жыл бұрын
Sir please make the video on coolant change of same car (i10)
@diyguy7378
5 жыл бұрын
Dear, I had flushed coolant 2 years back only, will check if change is required will definitely change it and upload video as well.
@bankniftytommorow
5 жыл бұрын
@@diyguy7378 Ok sir ji.
@briananderson63165 жыл бұрын
Where is the MAP sensor located and should it be cleaned also ?
@diyguy7378
5 жыл бұрын
Hi, It's on throttle body, you can clean it using STP carb spray cleaner.....
@kalimyasin90163 жыл бұрын
Aur petrol car ka sirvish dekhayye
@hiteshkharbanda15274 жыл бұрын
How to check coolent in Hyundai i10 Bcz Coolent Box Mouth is very small So how can we guess about the same Pls reply
@diyguy7378
4 жыл бұрын
Coolant level is clearly visible in container check in day time, to check quality use screwdriver and insert it in box, coolant should be green in color.
@sharatkumar26714 ай бұрын
What is the size of oil filter wrench cap ?
@diyguy7378
4 ай бұрын
Hi, I don't see any size defined on socket, what you can do buy filter from auto shop and take that to tools shop and ask for socket to open it.
@omkarbhambure923 жыл бұрын
I am having same car but in this the rpm is high how to. Reduce it tell me
@sujitdas2855
3 жыл бұрын
Get throttle body cleaned with idle actuator...that should solve the problem, if not than get the sensor voltage checked, for i10 it should be between 3.19 to 3.21volt, the voltage can be adjusted easily from the sensor, just need to unscrew two screws of sensor adjust it and tight the screw back...though a multimeter is required to check the voltage...for better clarity refer KZread..."idle actuator cleaning of i10" and you will get various videos..
@rahulbadgujar99185 жыл бұрын
What is ur tyre size... Do they affect handling
@diyguy7378
5 жыл бұрын
Its 175 70 R13, handling would be better but you have to compromise with average.
@AJ-lv5 жыл бұрын
hw much engine oil is recommended by company.. 3 litres or 3.5 litres
@diyguy7378
5 жыл бұрын
Please refer your owners manual...
@m.f.k515
5 жыл бұрын
Mere channel ko subscribe kro me aisa videos banunga
@kalimyasin90163 жыл бұрын
Vistar se
@ankitgoel6sep4 жыл бұрын
what is the size of socket
@diyguy7378
4 жыл бұрын
Sorry oil filter socket size is not written on it, go to any tools shop and ask for i10 or xcent oil filter socket...
@makwanasunil794 жыл бұрын
I10 car 80 ki speed hone par vibrat karti hai, kyaa problems ho sakta hai
@diyguy7378
4 жыл бұрын
Car ke tyre check karwao, tyre ful gaya hoga...
@akshunyabajpai92865 жыл бұрын
Speak Louder. Are you on tbhp?
@diyguy7378
5 жыл бұрын
Akshunya Bajpai Hi, No I am not on TBHP.
@makwanasunil794 жыл бұрын
Bahut baar alignment karvaaya bhirbhi meri car left side khich jaati hai.
@ScanAlone
3 жыл бұрын
Bhai company se karao bahar se mat krao bahar se steering calibration nhi ho pati vo company me hi krte hai tbhi thik hogi
@akshunyabajpai92865 жыл бұрын
You have overfilled the oil.
@diyguy7378
5 жыл бұрын
Akshunya Bajpai No we can't fill as we have tight it horizontally.
@akshunyabajpai9286
5 жыл бұрын
DIY Guy I am saying that you have filled the engine oil above the F mark on dipstick. It is going to damage the oil seals in the long run.
@diyguy7378
5 жыл бұрын
Hi Akshunya Bajpai I follow owners manual to check all those specifications...
@PlayJewel5 жыл бұрын
U should never go under the car without using iron stands. That jack alone is not reliable.
@diyguy7378
5 жыл бұрын
Dear John I had used jack stand as well, you can check in video.
Пікірлер: 62
God bless u bro! Thanks for such an informative video
Very well explained and informative video. Thanks
Thanks from Europe
Excellent video. Thank you.
Informative video nicely explained thanks for the video
Please make video on Gearbox oil change for i10
Nice job, good motivation like chrisfix, please add spec of the consumables. Thanks
Very well explained process from an expert .
@diyguy7378
6 жыл бұрын
Mr jojo 007 , Thanks for appreciating my work....
Thanks for your reply 👍
Nice one parformas Yaar
جزاك الله خيرا وبارك الله فيك
Nice video good work 👍🇬🇧
@diyguy7378
5 жыл бұрын
Thanks Brian Anderson
Thank you
Good job bro
Very good vedio bro
Great video! Very detailed and informative.. keep up the good work! And I had a question! Hyundai recommends 20w40 or 20w50 mineral oil from Servo in Santro Xing (2005) So my question is should I go with 5w30 synthetic or just stick to the manufacturer's recommendation?
@diyguy7378
5 жыл бұрын
Please follow what is written in owner's manual. Regarding oil grade, it remains the same whether its synthetic or mineral oil.
Namaste, What is the NGK sparkplug no,. For 1.2 kappa engine.
Please show how to check resistance on spark plug HT cable wire hyundai i20???
How to change the air filter for clima? 🤔🙄
Make service video of Santro Xing
Can you tell me which Spark Plug Hyundai recommend for the 2010 i10 with the 1.1 engine please.
@diyguy7378
5 жыл бұрын
You can use Bosch or NGK
very nice video. where you got Hyundai genuine spares.
@PlayJewel
5 жыл бұрын
economics1998 there are many shops dedicated to selling genuine hyundai parts. Or u can buy online from websites like boodmo.com
@economics1998
5 жыл бұрын
@@PlayJewel Thank you
Is it always the good to use the old oil on the seal
@diyguy7378
5 жыл бұрын
Yes, no issue in that. I don't want to use my hands in new oil 😀
Sir please make the video on coolant change of same car (i10)
@diyguy7378
5 жыл бұрын
Dear, I had flushed coolant 2 years back only, will check if change is required will definitely change it and upload video as well.
@bankniftytommorow
5 жыл бұрын
@@diyguy7378 Ok sir ji.
Where is the MAP sensor located and should it be cleaned also ?
@diyguy7378
5 жыл бұрын
Hi, It's on throttle body, you can clean it using STP carb spray cleaner.....
Aur petrol car ka sirvish dekhayye
How to check coolent in Hyundai i10 Bcz Coolent Box Mouth is very small So how can we guess about the same Pls reply
@diyguy7378
4 жыл бұрын
Coolant level is clearly visible in container check in day time, to check quality use screwdriver and insert it in box, coolant should be green in color.
What is the size of oil filter wrench cap ?
@diyguy7378
4 ай бұрын
Hi, I don't see any size defined on socket, what you can do buy filter from auto shop and take that to tools shop and ask for socket to open it.
I am having same car but in this the rpm is high how to. Reduce it tell me
@sujitdas2855
3 жыл бұрын
Get throttle body cleaned with idle actuator...that should solve the problem, if not than get the sensor voltage checked, for i10 it should be between 3.19 to 3.21volt, the voltage can be adjusted easily from the sensor, just need to unscrew two screws of sensor adjust it and tight the screw back...though a multimeter is required to check the voltage...for better clarity refer KZread..."idle actuator cleaning of i10" and you will get various videos..
What is ur tyre size... Do they affect handling
@diyguy7378
5 жыл бұрын
Its 175 70 R13, handling would be better but you have to compromise with average.
hw much engine oil is recommended by company.. 3 litres or 3.5 litres
@diyguy7378
5 жыл бұрын
Please refer your owners manual...
@m.f.k515
5 жыл бұрын
Mere channel ko subscribe kro me aisa videos banunga
Vistar se
what is the size of socket
@diyguy7378
4 жыл бұрын
Sorry oil filter socket size is not written on it, go to any tools shop and ask for i10 or xcent oil filter socket...
I10 car 80 ki speed hone par vibrat karti hai, kyaa problems ho sakta hai
@diyguy7378
4 жыл бұрын
Car ke tyre check karwao, tyre ful gaya hoga...
Speak Louder. Are you on tbhp?
@diyguy7378
5 жыл бұрын
Akshunya Bajpai Hi, No I am not on TBHP.
Bahut baar alignment karvaaya bhirbhi meri car left side khich jaati hai.
@ScanAlone
3 жыл бұрын
Bhai company se karao bahar se mat krao bahar se steering calibration nhi ho pati vo company me hi krte hai tbhi thik hogi
You have overfilled the oil.
@diyguy7378
5 жыл бұрын
Akshunya Bajpai No we can't fill as we have tight it horizontally.
@akshunyabajpai9286
5 жыл бұрын
DIY Guy I am saying that you have filled the engine oil above the F mark on dipstick. It is going to damage the oil seals in the long run.
@diyguy7378
5 жыл бұрын
Hi Akshunya Bajpai I follow owners manual to check all those specifications...
U should never go under the car without using iron stands. That jack alone is not reliable.
@diyguy7378
5 жыл бұрын
Dear John I had used jack stand as well, you can check in video.