I just replaced my pad, thank you. some tips for others: - this took a WHILE. like an hour because it was so difficult refit the plastic retainer. the little clips are mushroom shaped, so I filed them down into normal pegs and they fitted a bit easier. press down as hard as you can in the same place as the pegs - put the silver frame bit in first, it's too fiddly to try and hold all 3 pieces together. - removing the plastic retainer is also difficult, mine also snapped, but it shouldn't matter. do be as careful as you can!

Thank you for the first video I've found of someone doing it properly.

Thank you very much for taking the time to show me on how to replace it !...been having such a hard time pressing the buttons. Now it is fixed thank you

@drarqhurram

3 жыл бұрын

Great to hear!

Did both my fobs in 20 mins total. So easy, thanks.

Najtańszy i najszybszy sposób na wymianę gumek. Nowe zakupione na chińskim portalu w cenie ok 6 EUR za 2 szt, po mocnym wciśnięciu ich spowrotem siedzą i wyglądają idealnie. Good job!!!

Video de gran ayuda, lo único que hay que suavizar los enganches del armazón de dentro para poder ponerlo otra vez.

Super demo Keep it up

thank you for your video so i fix my car key

So how do u get the new housing off without braking it

thanks sa tutorial.

Well that was nicely done saved me thank you

@drarqhurram

3 жыл бұрын

Glad it helped

May i know where to buy the new retainer?

thank you very much

Can you give me lien of this touch

Dont remove the retainer. Contrary to this video. It is NOT EASY to put it back.

@adzmitch

3 жыл бұрын

Do remove it, it's the best way to do a proper repair.

@johnwainwright6205

2 жыл бұрын

You have to remove it or else the new pad will not fit, I had a hell of a game trying to fit the new keypad until I watched this video and when I removed the retainer and refitted it following this video it fitted straight away

@stephenrichardson7477

2 жыл бұрын

Retainer is melted together from inside of casing if you remove it, it breaks I removed the lugs and glued with impact adhesive it went together well but be careful with the retainer

@toms3964

2 жыл бұрын

Getting the retainer off was bloody tricky, and now I can't get it back on, so I too would advise strong caution in that step.

@LongBowNL

2 жыл бұрын

I squeezed the pins on the retainer with some plyers. That way they are narrower at the tip and then fit better. It still needed some strength to push the retainer back in.

"Place retainer in new pad" is a $75 service call avoidance play every time. This is was a total day saver.

I find the new pad has no way of attaching to the retainer, guess I bought cheap and nasty ones. Will have to glue it

Hey, this is great but where did you get the replacement key-pad? I don't know where to find one. =-?

@keylacortes552

2 жыл бұрын

You can order it on Amazon! I just bought was for $10. And then you can just use the rubber instead of the whole fob

@PurpleWolfhound23

Жыл бұрын

Ebay

Where can i find it please and his name

If you don't glue that rubber pad it will come right off.