This is the kind of thing you send on a one way mars colonizing mission.

@BonifiedGFX

4 жыл бұрын

unfortunately 6 axis mills are pretty large

@Mad.Man.Marine

4 жыл бұрын

Shayn Webb who cares. You can build half the other crap that you wouldn’t be able to bring because of the weight.

@spacedoge3508

3 жыл бұрын

@@Mad.Man.Marine you would need a mining facility and a refinery too

@domesday1535

3 жыл бұрын

@@spacedoge3508 usually systems fail at a single point which leaves you with 95% of a fully functional system sitting in a place like mars completely useless. Predicting that point of failure is often impossible so one system like this could have something like a mars rover last 80 years instead of 8 years with only a few kilos of welding wire sent with it from Earth. The issue is one system like this would only become worth it if it maintained multiple systems or rovers in an accessible area. Something plausible down the line but not currently. The truth is there will be machines like this on other planets before there are mining and refining facilities for metal, and these systems already being present is one of the reasons those mines will be built

@aniolo5

3 жыл бұрын

​@@domesday1535 These are not welding wires, it's metal dust pushed in and heated/radiated with laser beam in neutral gas shielding. whole diffrent technology here. It's similar to SLS 3D printing but much more sophisticated. And it's hundreds times easier to get metal dust, anywhere.

I’m curious about the metallurgy and hardening characteristics of the 3d printed metal

Thank you for sharing this method of making a product! Very useful the tool combination and wide variety of producing!

this is very cool, thank you for filming and uploading.

So we get ether video or sound. Not both.

@Sh4dowHunter42

4 жыл бұрын

Lol

@SidneyPatrickson

4 жыл бұрын

Maybe they used copyrighted music and muted it instead or reuploading.

Its something satisfying to watch it work!!!

Amazing combination of EBAM and CNC !

Very impressive.

Great design!

Crazy useful stuff !

the best part was the commentary....i kept hearing, "I effed u up the ****"

Me gusta tu video

I fucking love Germany.

@bike4aday

6 жыл бұрын

Poland*

Im impressed.

This principle is really cool.

Amazing! How big laser power is?

Very efficient

Out of this world

I was just wondering if you need WDR camera for monitoring process? if so, we would be happy to offer great solution with our technology

Kein ewiges Schruppen von zu großen Reststücken - einfach kleinere nehmen und den Flansch auflasern. Aufschweißen ist mit Lufteinschlüssen und eher nur für verkackte Passungen.

Wahnsinn...

Why was the last shot CG instead of the finished item?

ahhhh cold welding smart

The ending made me think I lost power.

So this machine is using Directed energy deposition - DED -as 3D Printing method yes? and 5 axis CNC miling machine combined in a hybrid product, is that correct? What are the cost for one of these machines ? 300.000+ Dollars?

how is? versus normal miling? what improvemnt have? Except more flexibility on deasing like make round corner for better flow.

Printing to milling without baking... nice 😬

awesome!!!!!!!!!!!!!!

@jonvine4985

7 жыл бұрын

Александр Чудов j

holy shit.....

@SB-fr6pl

8 жыл бұрын

+Guy Fawkes holy shit

0:55 why 3d animation instead of the real video?

Is there one in space yet? Or the moon? If not there should be.

Es... hermoso.jpg

:O

after 3:47... only sound... no screen what's up?

they might have just changed the way the world makes parts

@simon-qy2xe

7 жыл бұрын

It is an animation, it is not possible

@Roboman5e15

7 жыл бұрын

some of it is some of it isnt

@Roboman5e15

7 жыл бұрын

some of it "IS" some of it "ISN'T". you can tell whats CGI and what isnt

@trevorthieme5157

7 жыл бұрын

LOL There is only 4 seconds of animation! 0:14 - 0:17 It is easy to see that everything is real. This is all the more true if you have welded or worked with robots to ANY degree. It is easily possible. The hardest thing about the process is programming the robot to move properly in patterns without bumping into another part of the build, overheating the part, or outright melting the part by welding on 1 place too long.

@stanleyking597

6 жыл бұрын

I see you something of upcoming tech in this field !

i marry this one....

i'm thinking of turning my old FDM plastic printer into a MIG 3D printer

I want it

Это гидродинамическое горячие напылееие. Не так ли?

Quality/price? It is innovative anyway.

@gunlover92

5 жыл бұрын

@Russian Tanker haha i bet wayyy more than that

@dritter7051

4 жыл бұрын

he forgot a „0“

Holy shit

It is not clear to me why we should use the expensive method of producing laminated parts when we have cheap options for composite production ???

How much is it? This is the shit when it comes to metal 3d printing/ cnc machine .

Looks like a lot of splatter on the part from the metal spray.

How to resolve powder clogging inside nozzle? what may be the possible causes?

@mortkebab2849

7 жыл бұрын

Perhaps a slight, similar charge on nozzle and powder to keep the powder away from the inside wall, and an opposite charge on the workpiece to attract the stream of powder.

@stanleyking597

6 жыл бұрын

welding gas amps /volts/ travel speed how fast metal is fed to work/also type of gas/ pressure of gas all this comes into play here but don't let this fool you the damd nozzle will get clogged up after some time of use /either clean or change that's all

residual stresses?

@nobilismaximus

7 жыл бұрын

I think the people who built the equipment will have a good understanding of the issues.

@skyhawk551

7 жыл бұрын

heat treatment afterwards

@stanleyking597

6 жыл бұрын

but ofcourse!

@99897767

5 жыл бұрын

@@nobilismaximus and proberbly have enough solution to it

this machine is the stuff of my wet dreams!!! lmao tmi AND its 2 years old!!!!!

Any updates?

Where can i buy one please and how much? Cheers.

Und wievel kostet?

@jevernlauder4632

3 жыл бұрын

kostet zuviel diese

The hell was that ending?

@atakama2380

4 жыл бұрын

dont expect a lot of thing at once :)

@squareroot1697

4 жыл бұрын

I love you guys

Is this machine is available outside to do projects in India ?

Its not 3d printing and 5 axis machining. Its additive and subtractive machining. Probably more like 3+2 machining

Company?

Axyeть

Holy shit !!

Просто секаз

Only the highest quality videos are without sound

@0LoneTech

5 жыл бұрын

Editing SNAFU, I think. There's some muzak at the end when there's no video.

¿Alguien tiene algún plan para que podamos fabricar armas?

Chr istansongstelugu

Whats

Does anyone have any plans for us to make weapons?

@outofthebox26

3 жыл бұрын

exactly what im looking for 🤣🤣 after 1 year , do you have one !?

i want to make hybrid insect

Technologie allemande? Toujours un coup d'avance...

The better 3D printer is run by God. His printer use Atoms to print all you see in the world in 3D.

I would not buy chinese.. no trust in their quality

then u touch the piece and it breaks instantly...what joke is this fukin process

@JustMeInMyPatrol

6 жыл бұрын

aww yeah so you have used it?>

@stanleyking597

6 жыл бұрын

I am a welder of 36 yrs the kind of technology that's gonna keep us from eating if we don't try to update our selves this is what is coming at us rapidly whether we like it or not it is scary I know future welding tech is moving dangerously fast BY the way Believe its not durable the technology is just one of the many 3d printing CNC technologies IT will eat everyones bread if we ALL do not update ourselves so sad but true like it or not do you know how many jobs will be lost due to this technology?! NOW for my welding experience :: stick3g 4g 6gr some pressure pipe xray ut bend strp nick stainless 7018 mild steel monel nickel get my point yet short arc pulse arc all this XRAY pulse CNC heliarc teacher at TH HARRIS TECHNICAL COLLEGE OPALOUSIS LOUISIANA WHERE SOMEOF THE BEST WELDERS IN THE WORLD COME FROM not being smart claudia33 if we don't learn now technology will take over after heat treatment it will let me say will be as strong or weak/brittle as they want for the application as they need /as procedure calls for no stronger no weaker I HOPE this helps you on your road to understanding this new technology in its infancy it will just be improved upon GOOD LUCK Claudia 33

@stanleyking597

6 жыл бұрын

LDT CNC WHAT ITS ON NOW!!!!!!!!!!!!!!!!!!!!

holy shit.....

@SB-fr6pl

8 жыл бұрын

+Guy Fawkes holy shit

@bustergonad3975

7 жыл бұрын

Guy Fawkes