Thank you for taking the time to show us new guys you tool bags. Helps me get a idea of what to start get a little of as i go.

And the winner for the most heavy tool bag is... Nice Tools bro,Nice bag.

Awesome setup sir... thanks for the bag and tool info... always great to see how other technicians set up their tools and bags...👍👍👍

Best load out of this bag and really nice tools respect

Great video... been in this field for 39 years, nice set up.

Good video, thanks. I use a backpack and a MC too, cool to see another mechanic’s tool load.

Like the video. Am always into Quality tools, good review and nice set up.

Dude, I love that Fenix MC11 flashlight too. I clip it onto my hat all the time

Dang carrying the whole shop lol

Quality tools man. I'm a Streamlight man myself. I've got 2 Strions and a Stylus Pro for back up haha.

That light in the tools bag is a great idea

Awesome video and tools. I’m a tool but myself. Go cubs!

I love your tools and ure veto pro I do Apt maintenance and I love knipex 2

I like those bags. Good video

The chicken stick in your PM bag has a slot on the tip that fits inside of a receptacle. The chicken stick should only light on the smaller slot. If you want to check for proper wiring just put the meter on AC Volts on its highest setting. Stick your leads in the slots on the receptacle and check the voltage. Then move the lead from the larger slot to the ground and you should have the same reading. If you have no voltage when you move from the larger slot to ground you have either no ground or hot and neutral are reversed. Put the lead back in the larger slot and move the lead from the smaller slot to ground. If you get 120v the receptacle is wired backwards. If you still get nothing there is no ground. If you are suspicious about the wiring you should be suspicious about the voltage as well. Remember neutral and ground are tied together at the service. So reading from neutral or ground to hot should be the same. Fluke leads are actually slotted to do this. Now you checking like an electrician and don't need that outlet tester.

Yeah I have the same Milwaukee flashlight and it bugs the hell out of me that the magnet is not included....ended up fabricating my own

Hey man. So far the best video showing how much stuff you can fit in that bag. Thanks!!!

@jtplumbing6592

7 жыл бұрын

Luis Romero I agree

@lowvoltagedude7837

5 жыл бұрын

That's for sure best load out of this bag

7:20 I have that little needle nose as well. Great tool!!

Good job .... From Kim The Cajun Goldwing Rider. 👍

All I can say bro is u seem so damm cool, the Rockies thing going on and the part u mentioned about your wife at the hair salon haha . Life is good man . Ur so chill . Keep up more great videos bro . I wish I was as skilled as you . I'm only starting out right now on installs!!!! Do you have season tickets for the Rockies? I live in Detroit Michigan so I'm a tigers fan but I love the Rockies too, there my second favorite. Take care brother

I have one the same tools back but I don't like it is to heavy! I believe your main packet has over 40 pound. Good video brother.

Great video.

Knipex wrench the best quality and strong tool👏

Nice bag 👌👌👌

Subscribed because we have alot in common it seems. Since you like flashlights check out the harbor freight braun slim bar folding light. For $20 they beat all my tube lights. Plus its rechargeable

Your set up is so similar to mine Minus the knipex

If you can find online get Milwaukee fastback 2 keeps extra blades also but flips and is solid

Nice set up but yeah I’ll agree with some of the guys here; some redundancy going on there. You could shed a couple pounds imo. Anyway, dude, you should check out Olights! I’m a flashlight GEEK. Had many Fenix’s and loved em. This Xmas I got an Olight and I’m devoted now. I wear a had ALWAYS at work. This light clips on a cap has a magnet and at night i charge it next to my phone so can save on batts. Check outta review on it if your up for a new light. Here’s the point: no having to keep up with a headlamp and it’s always clipped in your pocket so you always have it. Just my opinion. Good vid👍🏻 Olight S1R-Baton ll

When I heard you say your into flashlights I have to recommend Zebralight, check them out.

Try out the snap on adjustable wrenches (basically re branded bahco) but they have teeth to prevent any slippage. I will never use another crescent again.

@SusiesRepeat

4 жыл бұрын

I will never use another adjustable wrench instead I use Knipes pliers wrench.

When u coming out with another video bro.....

Wish my tools would stay like new

Those channel locks are great... however, I prefer Japanese tools over Italian any day

I love my knipex!

@daniellewis6355

6 жыл бұрын

Conservative America do you have knipex linemans? I’m trying to decide if i should buy some or not. I have Klein but have heard great things about the knipex.

great review

Almost like my bag for commercial HVAC but I love how you called them K nipex lol k is silent

@Adrianyoutubing

3 жыл бұрын

Not in Germany it isn't.

Nice bag honestly I prefer Chanel locks over the knipex just don’t think they bite down like the Chanel lock brand and Chanel lock is a lot cheaper

how much does your back pack weights ?

Your tool bag is just like mine except mine is all Klein

Like the video! I like a lot of the same tools. Going to get me some insulated screwdrivers I think now.

Would you choose Klein or knipex linemans? I have Klein and I’m trying to decide if i should get the knipex ones

@michaelherrmann9552

5 жыл бұрын

I just bought the knipex linesman and I love them. I had the kleins for 4 years and I had beat up the cutting edges to the point of being unusable. I tried the knipex dykes after having quality issues with the klein and got the linesman about 2 weeks ago. They're fantastic quality and I love how there's no break-in period unlike my klein. If you're thinking about it, I'd go ahead and grab a pair. You'll love them!

@lowvoltagedude7837

5 жыл бұрын

Go Klein buddy

Small diagnostics bag? That’s a full size bag!

awesome

I need that small bag were you get it

does your company pay for your tools or you pay out of pocket ?

Those adjustable spanners are made in Spain. I know I would rather something were made in Japan by Japanese engineers than in Spain by Spanish engineers. I've lived in both countries, trust me.

I understand the Chinese tool aversion, but fear made in Japan is far superior to most tosh made in Europe outside of Germany. LOL. Try KTC. It is very good stuff.

Is this your own business? If not.....what does your employer supply???

Doesn’t want made in China tools, buys Milwaukee 😂

@johnd9357

4 жыл бұрын

To be fair most all small power tools are made in China. Not much choice.

To many tools bro, overkill

I live in continental europe. And I gotta tell you: tools made in japan are generally better quaity than tools made in italy. there is a massive difference between china and japan.

Japan made tools got quality to em, just China is 50/50

tools never used ?

That bag is so fuckin weighed down

The Klein channnel kicks are made by nws

@18436572smallblock

4 жыл бұрын

Locks sorry

lol. 45 lbs. I didn't see the whole video when I comment. sorry

Your CHANNEL LOCK Code Blue are Made In Spain....! FYI

Lee Valley carries cup and magnet sets. www.leevalley.com/en/wood/page.aspx?p=58750&cat=1,42363,42348

Its Klein....not Klein’s

Do you use your tools bro!! You probably work in the office or something,.....there is no way there so clean.

@Texas_Tee

5 жыл бұрын

Sidewayz Xrunner the guy that works in the office but has all the top of the line shit but never uses it

Too much

Most inefficient tool bag I've ever seen. All brand new tools too. Must be new! The longer you're in the trade, the smaller your bag gets.

@_n8787

3 жыл бұрын

Na, just a preferance thing. To each his own.

@_n8787

3 жыл бұрын

Although i would never carry that beast on my back. I like my Tech-MC.